Background As a pillar industry in China, the manufacturing sector has a high incidence of non-fatal occupational injuries. The factors influencing non-fatal occupational injuries in this industry are closely related at various levels, including individual, equipment, environment, and management, making the analysis of these influencing factors complex. Objective To identify influencing factors of non-fatal occupational injuries among manufacturing workers, providing a basis for targeted interventions and surveillance. Methods A total of 2243 frontline workers from cable and shipbuilding enterprises were selected as study subjects to investigate the incidence of non-fatal occupational injuries and collect information at four levels: individual, equipment, management, and environment in past 12 months. Data balancing was performed using resampling, and LASSO regression was used to select factors of non-fatal occupational injuries. The influence degree and type of variables were judged based on the magnitude of the estimated coefficients of each variable, where variables with estimated coefficients > 0 are risk factors, and those <0 are protective factors. The area under the receiver operating characteristic (ROC)curve (AUC) was used to test the performance of the model, with an AUC value > 0.7 indicating good model performance. Results Among the 2243 frontline workers, males accounted for 77.7% (1742 out of 2243), with the main age range being 40-49 years old, representing 29.5% (661 out of 2243), 82.7% of the workers (1854 out of 2243) were married, and 55.6% (1248 out of 2243) had a junior middle school education level. The average monthly income for 51.0% (1144 out of 2243) of the workers was between 5000 and 6999 Chinese Yuan. The incidence of non-fatal occupational injuries among the manufacturing workers was 8.4% (189/2243) in the past 12 months. Among the 22 factors associated with the occurrence of non-fatal occupational injuries (P<0.05), 10 were individual-level factors, including gender, smoking, alcohol consumption, colleague relationships, average exercise duration, job burnout, work fatigue, musculoskeletal disorders, cardiovascular diseases, and neurological and sensory organ diseases; 3 were equipment-level factors, including equipment operability, hazardous workpieces, and safety hazards; 5 were environmental-level factors, including low temperatures, special operations, noise, workspace size, and dirty and disorderly environment; and 4 were management-level factors, including daily working hours, weekly working days, overtime, and pre-job technical training. The AUC value of the LASSO regression model was 0.704 and the final model retained a total of 10 variables. Among them, there were 7 risk factors for non-fatal occupational injuries (coefficient > 0), including safety hazards, musculoskeletal disorders, dangerous workpieces, job burnout, dirty and disorderly environment, smoking, and male gender; and 3 protective factors (coefficient < 0), including pre-job technical training, good colleague relationship, and long working days per week. Conclusion Manufacturing enterprises need to focus on the incidence of non-fatal occupational injuries and conduct targeted interventions for non-fatal occupational injuries by controlling potential safety hazards, providing pre-job technical training, reducing dangerous workpieces, rectifying working environment, and reasonably arranging working hours.

Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

Background Diseases severely affect the efficiency of workers. Comorbidity refers to the coexistence of two or more chronic diseases or health problems in the same individual. Previous studies have primarily focused on occupational injuries caused by environmental exposures, while the analysis of the epidemiological characteristics of self-reported diseases and occupational injuries among manufacturing workers has been insufficient. Objective To analyze the distribution of self-reported diseases and occupational injuries among manufacturing workers, the strength of correlation between different diseases, and common disease combinations, and to preliminarily explore the relationship between self-reported diseases and occupational injuries. Methods A cross-sectional survey was conducted to investigate the occupational injuries of 2382 workers in 2 manufacturing enterprises over the past year, and 2355 questionnaires were valid after cleaning. The questionnaire included three parts: basic information, occupational injury occurrence, and disease prevalence. The self-reported diseases diagnosed by physicians included musculoskeletal diseases, cardiovascular diseases, respiratory diseases, mental health problems, neurological and sensory organ diseases, digestive organ diseases, reproductive and urinary organ diseases, skin diseases, tumors, endocrine and metabolic system diseases, blood diseases and birth defects, a total of 11 types. Log-binomial model was used to calculate the prevalence ratio (PR) value of the association between different diseases, and UpSet diagram was used to present the disease combination pattern. Results In total, 40.2% (946/2355) of the study participants reported at least one disease, while 8.6% (203/2355), 5.2% (122/2355), and 5.9% (140/2355) reported having two, three, and four or more diseases, respectively. A higher prevalence was observed for musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases, which accounted for 18.0% (423/2355), 13.8% (324/2355), 9.3% (218/2355), and 9.1% (214/2355), respectively. Workers with musculoskeletal disorders, cardiovascular diseases, or neurological and sensory organ diseases reported significantly higher incidence of occupational injuries compared with workers without the corresponding diseases (P<0.001, P=0.041, and P=0.006, respectively). Musculoskeletal diseases were strongly associated with comorbidities of neurological and sensory organ diseases (PR values were 1.86 and 1.98, respectively), and the other patters were musculoskeletal diseases and digestive organ diseases (PR and OR values were 1.57 and 2.35, respectively), and musculoskeletal diseases and cardiovascular diseases (PR and OR values were 1.46 and 2.22, respectively). The largest binomial comorbidity group involved musculoskeletal diseases and neurological and sensory organ diseases, accounting for 5.4% (25/465) of the comorbid workers. Conclusion Among the self-reported diseases of manufacturing workers, musculoskeletal diseases, neurological and sensory organ diseases, digestive organ diseases, and skin diseases are more common. Musculoskeletal diseases and neurological and sensory organ diseases are the most common in all comorbidities. Musculoskeletal diseases, cardiovascular diseases, and neurological and sensory organ diseases are associated with occupational injuries. In the prevention and control of occupational injuries, joint prevention strategies targeting multiple diseases should be strengthened.

ObjectiveTo learn the density and seasonal variation of adult mosquitoes in Pudong New Area of Shanghai, and to explore the influence of meteorological factors on the density of adult mosquitoes. MethodsFrom April to November in 2017‒2021, adult mosquito density in Pudong New Area was monitored every ten days a time by using CO₂ trapping light method. Meteorological data were collected during the same time, and Pearson correlation analysis and multiple linear regression model were used to investigate the correlation between adult mosquito density and meteorological factors. ResultsThe seasonal variation of adult mosquito density showed a single-peak pattern, with the peak of 7.09 mosquitoes·(set·time)^-1 in July. The adult mosquito density was positively correlated with the monthly average temperature, monthly maximum temperature, monthly minimum temperature, and monthly average relative humidity (r=0.813, 0.793, 0.820, 0.617, all P<0.05), but negatively correlated with monthly average air pressure (r=-0.738, P<0.05). The regression equation of the adult mosquito density and monthly minimum temperature in Pudong New Area of Shanghai was Y=0.066 X₃-0.884, with a corrected R² of 0.673, indicating a good model fitting. ConclusionThe overall seasonal variation of adult mosquito density in Pudong New Area showed a single-peak pattern. The density of adult mosquitoes was correlated with the monthly average temperature, monthly maximum temperature, monthly minimum temperature, monthly average relative humidity, and monthly average air pressure, and linearly correlated with monthly minimum temperature.

Objective To construct intrauterine adhesion (IUA) mouse models induced by two different concentrations of ethanol injury, compare the phenotypes, and optimize a more stable IUA modeling method. Methods Twenty 8-week-old female C57BL/6N mice were randomly divided into two groups: the 95% ethanol injury group and the 50% ethanol injury group. Using a self-control method, the left uterine horn was infused with ethanol to establish the IUA model, while the right uterine horn was infused with saline as the sham operation. Five mice from each group were euthanized on day 7 and 15 after modeling, and uterine tissues were collected. Hematoxylin-eosin (HE) staining was used to observe the endometrial pathology, and Masson staining was used to assess the degree of endometrial fibrosis. Quantitative real-time PCR was employed to detect the expression levels of fibrosis markers and pro-inflammatory factors in the uterine tissues. Results Compared to the sham operation, these two ethanol injury led to a significant reduction in elasticity of the uterus, an increase in inflammatory infiltration, and a marked increase in the degree of fibrosis on day 7 after modeling (P<0.05). The 95% ethanol injury group showed a significant decrease in endometrial thickness (P<0.05), whereas no significant change was observed in the 50% ethanol injury group when compared to the sham operation (P>0.05). The expression levels of fibrotic marker molecules collagen type Ⅳ alpha 1 chain (Col4A1), α-smooth muscle actin (α-SMA), transforming growth factor-β (TGF-β), and pro-inflammatory factors tumor necrosis factor-α (TNF-α) and interleukin-1β (IL-1β) were significantly elevated in the 50% ethanol injury group when compared to the sham operation (P<0.05), although there was an increasing trend of the same markers in the 95% ethanol injury group, the differences were not statistically significant (P>0.05). On day 15 after modeling, the histopathological changes in both ethanol injury groups were not significant when compared to the sham operation, the expression levels of Col4A1, TGF-β, TNF-α and IL-1β remained significantly higher in the 50% ethanol injury group (P<0.05), while only IL-1β was significantly elevated in the 95% ethanol injury group (P<0.05). Conclusion Uterine infusion with 95% ethanol results in more marked histopathological changes in the IUA mouse model compared to the 50% ethanol injury group. The 95% ethanol injury model is suitable for histopathological studies. However, the 50% ethanol injury group shows higher expression levels of fibrosis markers and pro-inflammatory factors compared to the 95% ethanol injury group, suggesting that the 50% ethanol injury model is more suitable for molecular pathological study.

[摘 要] 目的：探讨RNA结合蛋白15（RBM15）通过三磷酸腺苷酶家族蛋白3A（ATAD3A）调控Wnt/β-catenin通路对宫颈癌细胞恶性生物学行为的影响。方法：利用TCGA数据库分析宫颈癌组织中RBM15 mRNA表达水平及其与患者预后的关系。收集2024年1月至10月期间在赣州市人民医院手术切除的32例宫颈癌组织及癌旁组织标本，以及宫颈癌细胞HeLa、MS-751、C-33A和SiHa，通过免疫组化、WB法检测宫颈癌组织和细胞中RBM15的表达水平。利用SRAMP在线数据库筛选ATAD3A mRNA的m6A修饰位点。通过RNA免疫沉淀实验、RNA衰变实验及挽救实验鉴定RBM15与ATAD3A mRNA的相互作用。采用RNA干扰技术和病毒感染技术，在宫颈癌HeLa和SiHa细胞敲低或过表达RBM15和ATAD3A，qPCR和WB法检测mRNA和蛋白表达，CCK-8法、划痕实验和Transwell实验检测各组细胞的增殖、迁移和侵袭能力。结果：宫颈癌组织中RBM15 mRNA和蛋白阳性率均显著高于癌旁组织（均P < 0.001）。宫颈癌HeLa、MS-751、C-33A和SiHa细胞RBM15蛋白表达水平显著高于正常宫颈细胞Ect1/E6E7（均P < 0.01）。RBM15 mRNA高表达组患者5年无进展生存率低于低表达组患者（P < 0.01）。宫颈癌组织中ATAD3A的表达水平显著高于癌旁组织（P < 0.001），RBM15 mRNA与ATAD3A mRNA呈正相关（r = 0.601，P < 0.05）。ATAD3A mRNA的501、5 312、12 137位点存在高可信度的m6A修饰位点。HeLa、SiHa细胞中过表达RBM15后，ATAD3A mRNA和蛋白表达升高，而敲低RBM15后，ATAD3A mRNA和蛋白表达降低（均P < 0.001）。RNA免疫沉淀实验显示，与IgG组相比，RBM15抗体的免疫沉淀中ATAD3A mRNA显著富集（均P < 0.001）。MeRIP-qPCR实验显示，ATAD3A mRNA 501、5 312、12 137位点均存在明显的m6A甲基化富集（均P < 0.001）。RNA衰变实验显示，敲低RBM15能降低HeLa、SiHa细胞ATAD3A mRNA的半衰期和稳定性（均P < 0.001）。敲低HeLa、SiHa细胞RBM15的表达，显著抑制癌细胞的增殖、迁移及侵袭，Wnt/β-catenin通路相关蛋白Wnt3、β-catenin、vimentin表达均显著降低（均P < 0.001）；而过表达ATAD3A可完全逆转上述抑制作用（均P < 0.001）。结论：RBM15通过m6A修饰ATAD3A mRNA调控Wnt/β-catenin信号通路，从而促进宫颈癌细胞增殖、迁移及侵袭。

Malignant proliferating liver cancer cells possess the ability to detect and respond to various body signals, thereby facilitating tumor growth, invasion, and metastasis. One crucial mechanism through which hepatocellular carcinoma (HCC) cells interpret these signals is crosstalk. Within liver cancer tissues, cancer cells engage in communication with hepatic stellate cells (HSCs), tumor-associated macrophages (TAMs), and immune cells. This interaction plays a pivotal role in regulating the proliferation, invasion, and metastasis of HCC cells. Crosstalk occurs in multiple ways, each characterized by distinct functions. Its molecular mechanisms primarily involve regulating immune cell functions through the expression of specific receptors, such as CD24 and CD47, modulating cell functions by secreting cytokines like transforming growth factor-β (TGF-β) and platelet-derived growth factor (PDGF), and mediating cell growth and proliferation by activating pathways such as Wnt/β-catenin and Hedgehog. A comprehensive understanding of the mechanisms and interactions within crosstalk is essential for unraveling the pathogenesis of HCC. It also opens up new avenues for the development of innovative therapeutic strategies. This article reviews the relationship between crosstalk and the progression of HCC, offering insights and inspiration for future research.
Humans ; Carcinoma, Hepatocellular/metabolism* ; Liver Neoplasms/metabolism* ; Hepatic Stellate Cells/physiology* ; Disease Progression ; Signal Transduction/physiology* ; Transforming Growth Factor beta/metabolism* ; Cell Proliferation ; Hedgehog Proteins/metabolism* ; Tumor-Associated Macrophages ; Platelet-Derived Growth Factor/metabolism* ; Cell Communication/physiology*

OBJECTIVES: To study genotype-phenotype correlations in children with FGFR3 variants and to improve clinical recognition of related disorders. METHODS: Clinical data of 95 patients aged 0-18 years harboring FGFR3 variants, confirmed by whole‑exome sequencing at Shanghai Children's Medical Center from January 2012 to December 2023, were retrospectively reviewed. Detailed phenotypic characterization was performed for 22 patients with achondroplasia (ACH) and 10 with hypochondroplasia (HCH). RESULTS: Among the 95 patients, 52 (55%) had ACH, 24 (25%) had HCH, 9 (9%) had thanatophoric dysplasia, 3 (3%) had syndromic skeletal dysplasia, 2 (2%) had severe achondroplasia with developmental delay and acanthosis nigricans, and 5 (5%) remained unclassified. A previously unreported FGFR3 variant, c.1663G>T, was identified. All 22 ACH patients presented with disproportionate short stature accompanied by limb dysplasia, commonly with macrocephaly, a depressed nasal bridge, bowed legs, and frontal bossing; complications were present in 17 (77%). The 10 HCH patients predominantly exhibited disproportionate short stature with limb dysplasia and depressed nasal bridge. CONCLUSIONS ACH is the most frequent phenotype associated with FGFR3 variants, and missense variants constitute the predominant variant type. The degree of FGFR3 activation appears to correlate with the clinical severity of skeletal dysplasia.
Humans ; Receptor, Fibroblast Growth Factor, Type 3/genetics* ; Child ; Male ; Child, Preschool ; Female ; Infant ; Adolescent ; Dwarfism/genetics* ; Achondroplasia/genetics* ; Lordosis/genetics* ; Infant, Newborn ; Retrospective Studies ; Genetic Association Studies ; Bone and Bones/abnormalities* ; Phenotype ; Limb Deformities, Congenital