ObjectiveThe controllability changes of structural brain network were explored based on the control and brain network theory in young smokers, this may reveal that the controllability indicators can serve as a powerful factor to predict the sleep status in young smokers. MethodsFifty young smokers and 51 healthy controls from Inner Mongolia University of Science and Technology were enrolled. Diffusion tensor imaging (DTI) was used to construct structural brain network based on fractional anisotropy (FA) weight matrix. According to the control and brain network theory, the average controllability and the modal controllability were calculated. Two-sample t-test was used to compare the differences between the groups and Pearson correlation analysis to examine the correlation between significant average controllability and modal controllability with Fagerström Test of Nicotine Dependence (FTND) in young smokers. The nodes with the controllability score in the top 10% were selected as the super-controllers. Finally, we used BP neural network to predict the Pittsburgh Sleep Quality Index (PSQI) in young smokers. ResultsThe average controllability of dorsolateral superior frontal gyrus, supplementary motor area, lenticular nucleus putamen, and lenticular nucleus pallidum, and the modal controllability of orbital inferior frontal gyrus, supplementary motor area, gyrus rectus, and posterior cingulate gyrus in the young smokers’ group, were all significantly different from those of the healthy controls group (P<0.05). The average controllability of the right supplementary motor area (SMA.R) in the young smokers group was positively correlated with FTND (r=0.393 0, P=0.004 8), while modal controllability was negatively correlated with FTND (r=-0.330 1, P=0.019 2). ConclusionThe controllability of structural brain network in young smokers is abnormal. which may serve as an indicator to predict sleep condition. It may provide the imaging evidence for evaluating the cognitive function impairment in young smokers.

Background As a pillar industry in China, the manufacturing sector has a high incidence of non-fatal occupational injuries. The factors influencing non-fatal occupational injuries in this industry are closely related at various levels, including individual, equipment, environment, and management, making the analysis of these influencing factors complex. Objective To identify influencing factors of non-fatal occupational injuries among manufacturing workers, providing a basis for targeted interventions and surveillance. Methods A total of 2243 frontline workers from cable and shipbuilding enterprises were selected as study subjects to investigate the incidence of non-fatal occupational injuries and collect information at four levels: individual, equipment, management, and environment in past 12 months. Data balancing was performed using resampling, and LASSO regression was used to select factors of non-fatal occupational injuries. The influence degree and type of variables were judged based on the magnitude of the estimated coefficients of each variable, where variables with estimated coefficients > 0 are risk factors, and those <0 are protective factors. The area under the receiver operating characteristic (ROC)curve (AUC) was used to test the performance of the model, with an AUC value > 0.7 indicating good model performance. Results Among the 2243 frontline workers, males accounted for 77.7% (1742 out of 2243), with the main age range being 40-49 years old, representing 29.5% (661 out of 2243), 82.7% of the workers (1854 out of 2243) were married, and 55.6% (1248 out of 2243) had a junior middle school education level. The average monthly income for 51.0% (1144 out of 2243) of the workers was between 5000 and 6999 Chinese Yuan. The incidence of non-fatal occupational injuries among the manufacturing workers was 8.4% (189/2243) in the past 12 months. Among the 22 factors associated with the occurrence of non-fatal occupational injuries (P<0.05), 10 were individual-level factors, including gender, smoking, alcohol consumption, colleague relationships, average exercise duration, job burnout, work fatigue, musculoskeletal disorders, cardiovascular diseases, and neurological and sensory organ diseases; 3 were equipment-level factors, including equipment operability, hazardous workpieces, and safety hazards; 5 were environmental-level factors, including low temperatures, special operations, noise, workspace size, and dirty and disorderly environment; and 4 were management-level factors, including daily working hours, weekly working days, overtime, and pre-job technical training. The AUC value of the LASSO regression model was 0.704 and the final model retained a total of 10 variables. Among them, there were 7 risk factors for non-fatal occupational injuries (coefficient > 0), including safety hazards, musculoskeletal disorders, dangerous workpieces, job burnout, dirty and disorderly environment, smoking, and male gender; and 3 protective factors (coefficient < 0), including pre-job technical training, good colleague relationship, and long working days per week. Conclusion Manufacturing enterprises need to focus on the incidence of non-fatal occupational injuries and conduct targeted interventions for non-fatal occupational injuries by controlling potential safety hazards, providing pre-job technical training, reducing dangerous workpieces, rectifying working environment, and reasonably arranging working hours.

Background Workers in the cable manufacturing industry are exposed to high-speed machinery and equipment for a long time, coupled with heavy workload, which poses significant risks to their physical health. However, the issue of occupational injuries in this industry has not received enough attention yet. Objective To understand the incidence of occupational injury of workers in cable manufacturing industry and to analyze the influencing factors. Method A basic information questionnaire and an occupational injury questionnaire were developed to investigate the occupational injuries of 1 343 workers in a cable manufacturing enterprise in the past year, and a total of 1 225 valid questionnaires were recovered, with an effective rate of 91.2%. Descriptive statistics were used to characterize the causes, injury locations, injury types, and other characteristics of employees’ occupational injuries. Chi-square test was used to analyze the occupational injury status of groups with different demographic characteristics, occupational characteristics, lifestyles, and interpersonal relationships. Logistic regression was used to analyze the influencing factors of occupational injuries. Result The incidence of occupational injuries among workers in a cable manufacturing enterprise in the past year was 8.6%, which mainly happened in male workers (80.0%) and occurred from May to July in summer (45.7%). The main causes were mechanical injuries (32.4%) and object blows (27.6%). The main sources of damage were machinery and equipment (36.2%) as well as raw materials and products (15.2%). The main injuries were located in upper limbs (53.3%) and lower limbs (22.9%). The main types of injuries were fractures (33.3%) and abrasions/contusions/puncture wounds (19.0%). The results of univariate analysis showed that there were statistically significant variations in the incidence of occupational injuries by gender, overtime, pre-job training, years of service in current position, alcohol consumption, physical exercise per week, and co-worker relationship (P<0.05). The logistic regression model showed that workers who exercised less than twice a week, did not participate in pre-job training, worked overtime, and had fair/poor/very poor colleague relationship had a higher risk of occupational injury, while women had a lower risk of occupational injury. Conclusion The distribution of occupational injury population is mainly male, and the time distribution is mainly from May to July. Gender, physical exercise, pre-job training, overtime, and colleague relationship are the influencing factors of occupational injuries. We should strengthen pre-job training, arrange work hours reasonably, and create a good working atmosphere to reduce the occurrence of occupational injuries.

Background Social psychological factors have emerged as a key area of research in occupational injury prevention. Occupational stress, a significant component of social psychology, has garnered widespread attention due to its potential impact on occupational injury. Objective To analyze the factors influencing occupational stress among cable manufacturing workers and explore the relationship between occupational stress and occupational injury, and to provide scientific evidence for reducing occupational stress and injury. Methods A questionnaire on basic demographics, occupational injury, and occupational stress (Effort-Reward Imbalance, ERI) was used to investigate 1343 workers in a cable enterprise. Chi-square test was employed to analyze the distribution of occupational stress across different worker characteristics. Logistic regression was used to identify factors influencing occupational stress, and a decision tree model was applied to assess the impact of occupational stress on injury risk. Results A total of 1225 valid questionnaires were collected, yielding a response rate of 91.2%. The positive rate of occupational stress was 28.7%, while the incidence of occupational injury in the past year was 8.6%. The results of univariate analysis revealed that workers who had experienced occupational injuries had a higher positive rate of occupational stress compared to those without injuries (P<0.05), and there were significant differences in the distribution of occupational stress by genders, overtime work, shift work, daily working hours, fatigue levels, sleep duration, family relationships, and colleague relationships (P<0.05). The logistic regression results showed that individuals who worked shifts, had fair/poor/very colleague relationships, and frequently worked overtime had a higher risk of occupational stress (P<0.05). The final decision tree model confirmed that occupational stress was a risk factor for occupational injury. Additional factors influencing occupational injury included physical exercise, colleague relationships, pre-job training participation, and gender. Workers who exercised less than twice per week and experienced occupational stress had a significantly higher risk of injury (23.6%) compared to those without occupational stress (10.9%). Conclusion Shift work, colleague relationships, and overtime work are correlated with the positive rate of occupational stress among cable manufacturing workers. Implementing a reasonable work schedule and fostering a positive work environment are recommended. Reducing occupational stress may help lower the risk of occupational injuries in this industry.

ObjectiveTo characterize the seasonal patterns of influenza in Kunming City, Yunnan Province before, during, and after the COVID-19 pandemic, and provide scientific evidence for optimizing influenza prevention and control strategies. MethodsInfluenza-like illness (ILI) and etiological surveillance data for influenza from the 14^th week of 2010 to the 13^th week of 2024 in Kunming City of Yunnan Province were collected. Harmonic regression models were constructed to analyze the epidemic characteristics and seasonal patterns of influenza before (2010/2011‒2019/2020 influenza seasons), during (2020/2021‒2022/2023 influenza seasons), and after (2023/2024 influenza season) the COVID-19 pandemic. ResultsBefore the COVID-19 pandemic, influenza in Kunming City mainly exhibited an annual cyclic pattern without a significant semi-annual periodicity, peaking from December to February of the next year, with an epidemic duration of 20‒30 weeks. During the pandemic, influenza seasonality shifted, with an increase in semi-annual periodicity and an approximate one month delay in annual peaks. However, after the pandemic, the annual amplitude of influenza increased compared with that before the pandemic, and the epidemic duration extended by about one month. Although the annual peak largely reverted to the pre-pandemic levels, the annual peaks for different influenza subtypes/lineages had not fully recovered. ConclusionInfluenza seasonality in Kunming City underwent substantial alterations following the COVID-19 pandemic and has not yet fully reverted to pre-pandemic levels. Continuous surveillance on different subtypes/lineages of influenza viruses remains essential, and prevention and control strategies should be adjusted and optimized in a timely manner based on current epidemic trends.

ObjectiveTo investigate the effects of Linggui Zhugantang on mitochondrial fission and fusion and silencing information regulator 3（Sirt3）/adenosine monophosphate dependent protein kinase （AMPK） signaling pathway in chronic heart failure （CHF） rats after myocardial infarction （MI）. MethodSD rats randomly divide into sham operation group （normal saline ，thread only without ligature）， model group （normal saline， ligation of the left anterior descending coronary artery proximal to the heart）， Linggui Zhugantang group （4.8 g·kg^-1） and Captopril group （0.002 57 g·kg^-1）， with 10 rats in each group. Administere drug continuously for 28 days. Echocardiography detected cardiac function parameters. Hematoxylin eosin （HE） staining observed the pathological changes of the heart. Immunofluorescence detected the levels of reactive oxygen species （ROS）. JC-1 detect mitochondrial membrane potential. Colorimetry measure adenosine triphosphate （ATP）， superoxide dismutase （SOD）， malondialdehyde （MDA）， mitochondrial respiratory chain complex activity （Ⅰ-Ⅳ）. TdT-mediated dUTP nick end labeling （TUNEL） staining detected the apoptosis rate of myocardial tissue. Western blot detected protein expression levels of Sirt3， phosphorylated AMPK （p-AMPK）， phosphorylated dynamic-related protein 1（p-Drp1）， mitochondrial fission protein 1（Fis1）， mitochondrial fission factor （MFF）， optic atrophy protein 1（OPA1）. ResultCompared to the sham group， the left ventricular end diastolic diameter （LVIDd） and left ventricular end systolic diameter （LVIDs） were significantly increased in model group （P<0.01）， while the left ventricular short axis shortening rate （LVFS） and left ventricular ejection fraction （LVEF） were significantly decreased （P<0.01）. There were inflammatory cell infiltration and obvious pathological injury in myocardial tissue. ROS， MDA levels and myocardial cell apoptosis rate were significantly increased （P<0.01）， SOD level， ATP content， and membrane potential were significantly decreased （P<0.01）. The activity of mitochondrial respiratory chain complexes （Ⅰ-Ⅳ） was significantly decreased （P<0.01）. Levels of p-Drp1， Fis1， MFF proteins were significantly up-regulated （P<0.01）， while Sirt3， p-AMPK， OPA1 proteins level were significantly down-regulated （P<0.01）. Compared with model group， LVIDd and LVIDs were significantly decreased （P<0.01）， LVEF and LVFS were significantly increased （P<0.01）. Inflammatory cell infiltration and pathological damage of myocardial tissue were significantly relieved. ROS， MDA levels and myocardial cell apoptosis rate were significantly decreased in Linggui Zhugantang group and Captopril group （P<0.01）， SOD level， ATP content， and membrane potential significantly increased （P<0.01）. The activity of mitochondrial respiratory chain complexes （Ⅰ-Ⅳ） increased significantly （P<0.01），and p-Drp1， Fis1， MFF protein levels were significantly down-regulated （P<0.01）， Sirt3， p-AMPK， OPA1 protein were significantly up-regulated （P<0.01）. ConclusionLinggui Zhugantang can alleviate oxidative stress and apoptosis damage of myocardial cells， maintain mitochondrial function stability， and its effect may be related to mitochondrial mitosis fusion and Sirt3/AMPK signaling pathway.

Objective To explore the effect and mechanism of hydroxysafflor yellow A(HSYA)on autophagy in bEnd.3 cells after oxygen-glucose deprivation(OGD).Methods The bEnd.3 cells were divided into normal group(conventional culture),model group(OGD model),HSYA group(OGD model+75 μmol·L-1 HSYA),3-methyladenine(3MA)group(5 mmol·L-1 3MA+OGD model)and 3 MA+HSYA group(5 mmol·L-1 3 MA+OGD model+75 μmol·L-1 HSYA).The level of apoptosis was determined by TUNEL fluorescence staining;Western blot was used to detect the expression of autophagy,blood brain barrier(BBB)related proteins;real time fluorescence quantitative polymerase chain reaction method for determining the expression of sirtuin-1(SIRT1)and forkhead box protein O3a(FOXO3A)mRNA.Results In the normal group,model group,HSYA group,3MA group and 3MA+HSYA group,the positive cells selected for TUNEL staining were 5.00±1.00,28.00±2.00,21.00±3.00,35.33±2.51 and 29.67±2.52;the expression levels of microtubule-associated protein 1 light chain 3-Ⅱ/-Ⅰ(LC3-Ⅱ/-Ⅰ)were 0.90±0.20,1.34±0.10,1.95±0.14,0.76±0.15 and 1.14±0.09;sequestosome 1(P62)were 0.99±0.02,0.60±0.02,0.38±0.01,0.67±0.04 and 0.54±0.01;occludin were 1.39±0.17,0.62±0.15,1.00±0.09,0.40±0.13 and 0.80±0.15;zonula occludens-1(ZO-1)were 1.63±0.20,0.64±0.06,0.98±0.14,0.37±0.14 and 0.87±0.04;SIRT1 mRNA were 1.00±0.00,0.75±0.07,1.69±0.09,0.31±0.02 and 0.56±0.01;FOXO3A mRNA were 1.00±0.00,0.80±0.05,1.47±0.09,0.40±0.01 and 0.62±0.09,respectively.Significant differences were found between model group and normal group,HSYA group and model group,3MA+HSYA group and 3MA group(P＜0.05,P＜0.01,P＜0.001).Conclusion HSYA may enhance autophagy levels in bEnd.3 cells after OGD through the SIRT1/FOXO3A pathway,inhibit cell apoptosis and alleviate BBB damage.

Schimke immuno-osseous dysplasia (SIOD)caused by SMARCAL1 gene mutations is a rare genetic disorder characterized by multi-system involvement, including T-cell dysfunction, skeletal dysplasia, disproportionate short stature, nephrotic syndrome, and kidney failure. This multidisciplinary consultation involved a 9-year-old boy with intrauterine growth retardation, presenting with short stature, T-cell lymphopenia, proteinuria, and degenerative bone and joint disease. Treatment primarily focused on symptomatic and supportive care. Through the multidisciplinary rare disease consultation, holistic support was provided to the patient, offering comprehensive care from various specialtiesx.We also aim to use this case report to enhance clinicians′ under-standing of SIOD and improve the management and treatment of rare diseases.

Objective: To investigate the distribution characteristics of trichlormethane in school drinking water in Jiangsu Province, and to evaluate the health risks and influencing factors of students exposed to trichlormethane, so as to provide a scientific basis for the disinfection and safety of school drinking water. Methods: A total of 315 schools (123 primary schools, 142 junior high schools, 20 high schools, and 30 universities) in Jiangsu Province were selected by a stratified sampling method. Water samples in the wet period (from July to September) of 2023 and in the dry period (from January to March) of 2024 in each school were collected, and 630 drinking water samples were collected. According to the Standard Examination Methods for Drinking Water (GB/T 5750-2023), drinking water samples were analyzed for trichlormethane, and the health risks of trichlormethane exposure in drinking water for students were assessed using the health risk assessment method recommended by US Environmental Protection Agency. The Kruskal-Wallis H rank sum test and Mann-Whitney U test were performed to analyze concentrations and health risks of trichlormethane in school drinking water in different groups. Results: The concentration of trichlormethane in school drinking water in Jiangsu Province was 8.9 (4.6, 14.0) μg/L. The carcinogenic risk of trichlormethane in school drinking water was 9.8×10 -6 (5.3×10 -6 , 1.7×10 -5 ), which was an acceptable low risk. The amount of drinking water per unit body weight and the concentration of trichlormethane in tap water samples were important factors affecting the carcinogenic risk in drinking water for students. Comparison of carcinogenic risks exposed to trichlormethane in drinking water were as follows:primary school students in lower grades had the highest risk of carcinogenesis, with a risk of 1.2×10 -5 , the wet period (1.3×10 -5 ) >the dry period (7.6×10 -6 ), river source water (1.0×10 -5 ) >lake source water (6.8×10 -6 ), liquid chlorine disinfection (1.1×10 -5 ) > sodium hypochlorite disinfection (9.3×10 -6 ), conventional treatment (1.4×10 -5 ) > advanced treatment (9.6×10 -6 ), with statistically significant differences ( Z=88.1, 3.7 , -3.2, -2.7, P <0.05). The non carcinogenic risk of trichlormethane in school drinking water was 1.4×10 -2 for less than 1, and the non carcinogenic risk was acceptable. Conclusions The carcinogenic and non carcinogenic risks of trichlormethane in school drinking water are acceptable in Jiangsu Province, and the primary school students in lower grades are key indicators for risk management of trichlormethane in drinking water. According to the characteristics of the source water, appropriate disinfection methods and water treatment processes are selected to reduce the content of trichlormethane and control health risk.

Objective To evaluate the clinical practical value of the golden angle radial sparse parallel(GRASP)technology in the MR imaging quality of lung cancer under free-breathing state.Methods The imaging data of 30 lung cancer patients diagnosed with CT screening were collected by using a large-aperture 3.0T MR scanner.All patients underwent routine Cartesian breath-hold volume interpolation(BH-VIBE)scanning,then free-breathing dynamic contrast-enhanced magnetic resonance imaging(DCE-MRI)scanning based on GRASP technology,and another repetitive BH-VIBE scanning.The MR imaging quality was independently evaluated by two experienced thoracic radiologists including overall image quality,lesion outline,artifact grade and diagnostic confidence,mean-while,the CT images of the patient at the same time were used as a reference.The sequence information on MR images was also pro-cessed blindly.Results The GRASP sequence could effectively eliminate the interference of motion artifacts such as respiration and cardiac large vessel beats,and the image quality,lesion outline,artifact grade,and diagnostic confidence of the GRASP sequence were significantly better than the BH-VIBE(P＜0.01).The image quality of the GRASP sequence was more satisfactory with clea-rer tumor boundary and more details.Conclusion Free-breathing high-temporal-spatial resolution GRASP technology has better image quality than traditional BH-VIBE scanning,and it is a reliable method for high-resolution imaging of lung cancer.