PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background: Skipping breakfast is associated with an increased risk of chronic inflammatory diseases. This study aimed to examine the association between breakfast-eating habits and inflammation, using high-sensitivity C-reactive protein (hs-CRP) as a marker. Methods: A total of 4,000 Korean adult males with no history of myocardial infarction, angina, stroke, diabetes, rheumatoid arthritis, cancer, or current smoking were included. Data from the 2016–2018 Korea National Health and Nutrition Examination Survey were used for analysis. The frequency of breakfast consumption was assessed through a questionnaire item in the dietary survey section asking participants about their weekly breakfast consumption routines over the past year. Participants were categorized into two groups, namely “0–2 breakfasts per week” and “3–7 breakfasts per week”; hs-CRP concentrations were measured through blood tests. Results: Comparing between the “infrequent breakfast consumption (0–2 breakfasts per week)” and “frequent breakfast consumption (3–7 breakfasts per week)” groups, the mean hs-CRP was found to be significantly higher in the “infrequent breakfast consumption” group, even after adjusting for age, body mass index, physical activity, alcohol consumption, systolic blood pressure, blood pressure medication, fasting blood glucose, and triglycerides (mean hs-CRP: frequent breakfast consumption, 1.36±0.09 mg/L; infrequent breakfast consumption, 1.17±0.05 mg/L; P-value=0.036). Conclusion Less frequent breakfast consumption was associated with elevated hs-CRP levels. Further large-scale studies incorporating adjusted measures of daily eating patterns as well as food quality and quantity are required for a deeper understanding of the role of breakfast in the primary prevention of chronic inflammatory diseases.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Objective: To analyze costs and cost-effectiveness of transforaminal endoscopic thoracic discectomy (TETD) for the treatment of symptomatic thoracic disc herniation (TDH) and compare it with open microdiscectomy (MD). Methods: This retrospective cohort study included patients who underwent TETD or MD for symptomatic TDH and had a minimum follow-up of 1 year. Cost analysis included direct costs (primary and secondary hospital costs), indirect costs (lost wages due to work absence), total costs (direct + indirect), and cost-effectiveness (cost per quality-adjusted life year [QALY] and incremental cost-effectiveness ratio [ICER]). Clinical outcomes included patient-reported outcome measures (Oswestry Disability Index [ODI], 36-item Short Form health survey [SF-36]), QALY gained, and reoperation and readmission rates at 1 year. TETD and MD groups were compared for outcome measures. Results: A total of 111 patients (57 TETD, 54 MD) were included. The direct ($6,270 TETD vs. $7,410 MD, p < 0.01), indirect costs ($1,250 TETD vs. $1,450 MD, p < 0.01), total costs ($7,520 TETD vs. $8,860 MD, p < 0.01), and cost per QALY ($31,333 TETD vs. $44,300 MD, p < 0.01) were significantly lower for TETD compared to MD. ICER of TETD was found to be -$33,500. At 1 year, TETD group showed significantly greater improvement in ODI (46% vs. 36%, p < 0.01) and SF-36 (64% vs. 53%, p < 0.01) and significantly greater QALY gained (0.24 vs. 0.2, p < 0.01) compared to MD group. No significant difference was found in reoperation and readmission rates. Conclusion TETD demonstrated significantly better clinical outcomes, lower overall costs, and better cost-effectiveness than MD in appropriately selected patients of symptomatic TDH.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background: This study evaluated adherence to the Global Initiative for Chronic Obstructive Lung Disease (GOLD) and Korean guidelines in the prescription patterns of respiratory specialists for stable chronic obstructive pulmonary disease (COPD) management. Methods: Data were collected on medications from 2011 to 2022 using the Korea COPD Subtype Study (KOCOSS) cohort. Patients were divided into two groups: those registered before and after 2019, and we analyzed the percentage of patients meeting the recommended treatment criteria established by each guideline. Results: Among 3,477 patients, 85.6% received pharmacological therapy, and 81.6% utilized inhaled medications. Compared to patients enrolled before 2019, there was an increase in inhaler prescriptions among those registered after 2019 (79.7% vs. 86.7%), with dual bronchodilators being the predominant therapy prescribed. Of the patients receiving treatment, 56.9% adhered to the Korean 2018 guideline. Compliance with the GOLD 2019 and GOLD 2023 guidelines was observed in 31.3% and 28.0% of cases, respectively. When analyzing inhaler prescription patterns according to both subgroups and considering the Korean 2018, GOLD 2019, and GOLD 2023 guidelines concurrently, the adherence rates were as follows: (56.6%, 37.8%, 24.0%) and (57.7%, 14.0%, 38.6%). Conclusion Adherence rates were higher for the Korean guideline compared to the GOLD recommendations. Furthermore, alignment with both the Korean 2018 and GOLD 2023 guidelines increased among patients enrolled after 2019, compared to those registered earlier. These findings suggest that physicians are modifying their therapeutic strategies to align with both domestic and recent international guidelines.

Background: This study aimed to identify the clinical characteristics of multidrug-resistant/ rifampicin-resistant tuberculosis (MDR/RR-TB) in the Republic of Korea. Methods: Data of notified people with tuberculosis between July 2018 and December 2021 were retrieved from the Korea Tuberculosis Cohort database. MDR/RR-TB was further categorized according to isoniazid susceptibility as follows: multidrug-resistant tuberculosis (MDR-TB), rifampicin-monoresistant tuberculosis (RMR-TB), and RR-TB if susceptibility to isoniazid was unknown. Multivariable logistic regression analysis was conducted to identify the factors associated with MDR/RR-TB. Results: Between 2018 and 2021, the proportion of MDR/RR-TB cases among all TB cases and TB cases with known drug susceptibility test results was 2.1% (502/24,447). The proportions of MDR/RR-TB and MDR-TB cases among TB cases with known drug susceptibility test results were 3.3% (502/15,071) and 1.9% (292/15,071), respectively. Among all cases of rifampicin resistance, 31.7% (159/502) were RMR-TB and 10.2% (51/502) were RR-TB. Multivariable logistic regression analyses revealed that younger age, foreigners, and prior tuberculosis history were significantly associated with MDR/ RR-TB. Conclusion Rapid identification of rifampicin resistance targeting the high-risk populations, such as younger generations, foreign-born individuals, and previously treated patients are necessary for patient-centered care.

Background: Idiopathic pulmonary fibrosis (IPF) is a chronic, progressive lung disease that culminates in respiratory failure and death due to irreversible scarring of the distal lung. While initially considered a chronic inflammatory disorder, the aberrant function of the alveolar epithelium is now acknowledged as playing a central role in the pathophysiology of IPF. This study aimed to investigate the regenerative capacity of alveolar type 2 (AT2) cells using IPF-derived alveolar organoids and to examine the effects of disease progression on this capacity. Methods: Lung tissues from three pneumothorax patients and six IPF patients (early and advanced stages) were obtained through video-assisted thoracoscopic surgery and lung transplantation. HTII-280+ cells were isolated from CD31-CD45-epithelial cell adhesion molecule (EpCAM)+ cells in the distal lungs of IPF and pneumothorax patients using fluorescence-activated cell sorting (FACS) and resuspended in 48-well plates to establish IPF-derived alveolar organoids. Immunostaining was used to verify the presence of AT2 cells. Results: FACS sorting yielded approximately 1% of AT2 cells in early IPF tissue, and the number decreased as the disease progressed, in contrast to 2.7% in pneumothorax. Additionally, the cultured organoids in the IPF groups were smaller and less numerous compared to those from pneumothorax patients. The colony forming efficiency decreased as the disease advanced. Immunostaining results showed that the IPF organoids expressed less surfactant protein C (SFTPC) compared to the pneumothorax group and contained keratin 5+ (KRT5+) cells. Conclusion This study confirmed that the regenerative capacity of AT2 cells in IPF decreases as the disease progresses, with IPF-derived AT2 cells inherently exhibiting functional abnormalities and altered differentiation plasticity.