Background/Aims: The Korean guidelines for Helicobacter pylori treatment were revised in 2020, however, the extent of adherence to these guidelines in clinical practice remains unclear. Herein, we initiated a prospective, nationwide, multicenter registry study in 2021 to evaluate the current management of H.pylori infection in Korea. Methods: This interim report describes the adherence to the revised guidelines and their impact on firstline eradication rates. Data on patient demographics, diagnoses, treatments, and eradication outcomes were collected using a web-based electronic case report form. Results: A total of 7,261 patients from 66 hospitals who received first-line treatment were analyzed.The modified intention-to-treat eradication rate for first-line treatment was 81.0%, with 80.4% of the prescriptions adhering to the revised guidelines. The most commonly prescribed regimen was the 14-day clarithromycin-based triple therapy (CTT; 42.0%), followed by tailored therapy (TT; 21.2%), 7-day CTT (14.1%), and 10-day concomitant therapy (CT; 10.1%). Time-trend analysis demonstrated significant increases in guideline adherence and the use of 10-day CT and TT, along with a decrease in the use of 7-day CTT (all p<0.001). Multivariate logistic regression analysis revealed that guideline adherence was significantly associated with first-line eradication success (odds ratio, 2.03; 95% confidence interval, 1.61 to 2.56; p<0.001). Conclusions The revised guidelines for the treatment of H. pylori infection have been increasingly adopted in routine clinical practice in Korea, which may have contributed to improved first-line eradication rates. Notably, the 14-day CTT, 10-day CT, and TT regimens are emerging as the preferred first-line treatment options among Korean physicians.

Purpose: Thrombosis and bleeding significantly affect morbidity and mortality in myeloproliferative neoplasms (MPNs). The efficacy and safety of direct oral anticoagulants (DOACs) in MPN patients remain uncertain. Materials and Methods: We conducted a large, retrospective, nationwide cohort study using the Korean Health Insurance Review and Assessment Service database from 2010 to 2021. Results: Out of the 368 MPN patients included in the final analysis, 62.8% were treated with DOACs for atrial fibrillation (AF), and 37.2% for venous thromboembolism (VTE). The AF group was statistically older with higher CHA2DS2-VASc (congestive heart failure, hypertension, age ≥ 75 years, diabetes mellitus, prior stroke, transient ischemic attack, or thromboembolism, vascular disease, age 65-74 years, sex category [female]) scores compared to the VTE group. Antiplatelet agents were used in 51.1% of cases, and cytoreductive drugs in 79.3%, with hydroxyurea being the most common (64.9%). The median follow-up was 22.3 months, with 1-year cumulative incidence rates of thrombosis and bleeding at 11.1% and 3.7%, respectively. Multivariate analysis identified CHA2DS2-VASc scores ≥ 3 (hazard ratio [HR], 3.48), concomitant antiplatelet use (HR, 2.57), and cytoreduction (HR, 2.20) as significant thrombosis risk factors but found no significant predictors for major bleeding. Conclusion Despite the limitations of retrospective data, DOAC treatment in MPN patients seems effective and has an acceptable bleeding risk.

Background and Objectives: Outcomes of deferring percutaneous coronary intervention (PCI) without invasive physiologic assessment for intermediate coronary lesions is uncertain.We sought to compare long-term outcomes between medical treatment and PCI of intermediate lesions without invasive physiologic assessment. Methods: A total of 899 patients with intermediate coronary lesions between 50% and 70% diameter-stenosis were randomized to the conservative group (n=449) or the aggressive group (n=450). For intermediate lesions, PCI was performed in the aggressive group, but was deferred in the conservative group. The primary endpoint was major adverse cardiac events (MACE, a composite of all-cause death, myocardial infarction [MI], or ischemia-driven any revascularization) at 3 years. Results: The number of treated lesions per patient was 0.8±0.9 in the conservative group and 1.7±0.9 in the aggressive group (p=0.001). At 3 years, the conservative group had a significantly higher incidence of MACE than the aggressive group (13.8% vs. 9.3%; hazard ratio [HR], 1.49; 95% confidence interval [CI], 1.00–2.21; p=0.049), mainly driven by revascularization of target intermediate lesion (6.5% vs. 1.1%; HR, 5.69; 95% CI, 2.20–14.73;p<0.001). Between 1 and 3 years after the index procedure, compared to the aggressive group, the conservative group had significantly higher incidence of cardiac death or MI (3.2% vs.0.7%; HR, 4.34; 95% CI, 1.24–15.22; p=0.022) and ischemia-driven any revascularization. Conclusions For intermediate lesions, medical therapy alone, guided only by angiography, was associated with a higher risk of MACE at 3 years compared with performing PCI, mainly due to increased revascularization.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Purpose: Adjuvant treatment for craniopharyngioma after surgery is controversial. Adjuvant external beam radiation therapy (EBRT) can increase the risk of long-term sequelae. Stereotactic radiosurgery (SRS) is used to reduce treatment-related toxicity.In this study, we compared the treatment outcomes and toxicities of adjuvant therapies for craniopharyngioma. Materials and Methods: We analyzed patients who underwent craniopharyngioma tumor removal between 2000 and 2017. Of the 153 patients, 27 and 20 received adjuvant fractionated EBRT and SRS, respectively. We compared the local control (LC), progression-free survival (PFS), and overall survival between groups that received adjuvant fractionated EBRT, SRS, and surveillance. Results: The median follow-up period was 77.7 months. For SRS and surveillance, the 10-year LC was 57.2% and 57.4%, respectively. No local progression was observed after adjuvant fractionated EBRT. One patient in the adjuvant fractionated EBRT group died owing to glioma 94 months after receiving radiotherapy (10-year PFS: 80%). The 10-year PFS was 43.6% and 50.7% in the SRS and surveillance groups, respectively. The treatment outcomes significantly differed according to adjuvant treatment in nongross total resection (GTR) patients. Additional treatment-related toxicity was comparable in the adjuvant fractionated EBRT and other groups. Conclusion Adjuvant fractionated EBRT could be effective in controlling local failure, especially in patients with non-GTR, while maintaining acceptable treatment-related toxicity.

Purpose: The purpose of this study was to develop an approach to alleviate the discomfort caused by sandbag compression after a bone marrow examination. This research examined the effects of applying a pressure hemostasis band on bleeding, pain, and discomfort at the bone marrow examination site. Methods: This study was conducted with a nonequivalent control group non-synchronized design. For 74 patients under evaluation who underwent bone marrow examination, sandbag compression was applied to the examination site in the control group (n=37), and a pressure hemostasis band was applied to the intervention group (n=37). In both groups, absolute bed rest was performed for two hours, and bleeding, pain, and discomfort at the examination site were measured. Results: After two hours of the bone marrow examination, there was no difference in bleeding on the gauze between the two groups (F=0.59, p=.444). Bleeding occurred in three patients in the intervention group and six in the control group (χ 2 =1.14, p=.479), with no cases of hematoma detected in either group. One hour post-examination, the control group experienced significantly higher pain (F=5.45, p=.022) and discomfort (F=5.68, p=.020) than the intervention group. However, pain and discomfort levels were similar between groups after two hours. Conclusion Compared to the sandbag compression group, the band application group showed no difference in bleeding and experienced less pain and discomfort at the examination site. This confirms that the pressure hemostasis band is a suitable alternative to sandbag compression in post-examination care.

Purpose: Thrombosis and bleeding significantly affect morbidity and mortality in myeloproliferative neoplasms (MPNs). The efficacy and safety of direct oral anticoagulants (DOACs) in MPN patients remain uncertain. Materials and Methods: We conducted a large, retrospective, nationwide cohort study using the Korean Health Insurance Review and Assessment Service database from 2010 to 2021. Results: Out of the 368 MPN patients included in the final analysis, 62.8% were treated with DOACs for atrial fibrillation (AF), and 37.2% for venous thromboembolism (VTE). The AF group was statistically older with higher CHA2DS2-VASc (congestive heart failure, hypertension, age ≥ 75 years, diabetes mellitus, prior stroke, transient ischemic attack, or thromboembolism, vascular disease, age 65-74 years, sex category [female]) scores compared to the VTE group. Antiplatelet agents were used in 51.1% of cases, and cytoreductive drugs in 79.3%, with hydroxyurea being the most common (64.9%). The median follow-up was 22.3 months, with 1-year cumulative incidence rates of thrombosis and bleeding at 11.1% and 3.7%, respectively. Multivariate analysis identified CHA2DS2-VASc scores ≥ 3 (hazard ratio [HR], 3.48), concomitant antiplatelet use (HR, 2.57), and cytoreduction (HR, 2.20) as significant thrombosis risk factors but found no significant predictors for major bleeding. Conclusion Despite the limitations of retrospective data, DOAC treatment in MPN patients seems effective and has an acceptable bleeding risk.

Background/Aims: The Korean guidelines for Helicobacter pylori treatment were revised in 2020, however, the extent of adherence to these guidelines in clinical practice remains unclear. Herein, we initiated a prospective, nationwide, multicenter registry study in 2021 to evaluate the current management of H.pylori infection in Korea. Methods: This interim report describes the adherence to the revised guidelines and their impact on firstline eradication rates. Data on patient demographics, diagnoses, treatments, and eradication outcomes were collected using a web-based electronic case report form. Results: A total of 7,261 patients from 66 hospitals who received first-line treatment were analyzed.The modified intention-to-treat eradication rate for first-line treatment was 81.0%, with 80.4% of the prescriptions adhering to the revised guidelines. The most commonly prescribed regimen was the 14-day clarithromycin-based triple therapy (CTT; 42.0%), followed by tailored therapy (TT; 21.2%), 7-day CTT (14.1%), and 10-day concomitant therapy (CT; 10.1%). Time-trend analysis demonstrated significant increases in guideline adherence and the use of 10-day CT and TT, along with a decrease in the use of 7-day CTT (all p<0.001). Multivariate logistic regression analysis revealed that guideline adherence was significantly associated with first-line eradication success (odds ratio, 2.03; 95% confidence interval, 1.61 to 2.56; p<0.001). Conclusions The revised guidelines for the treatment of H. pylori infection have been increasingly adopted in routine clinical practice in Korea, which may have contributed to improved first-line eradication rates. Notably, the 14-day CTT, 10-day CT, and TT regimens are emerging as the preferred first-line treatment options among Korean physicians.

Background and Objectives: Outcomes of deferring percutaneous coronary intervention (PCI) without invasive physiologic assessment for intermediate coronary lesions is uncertain.We sought to compare long-term outcomes between medical treatment and PCI of intermediate lesions without invasive physiologic assessment. Methods: A total of 899 patients with intermediate coronary lesions between 50% and 70% diameter-stenosis were randomized to the conservative group (n=449) or the aggressive group (n=450). For intermediate lesions, PCI was performed in the aggressive group, but was deferred in the conservative group. The primary endpoint was major adverse cardiac events (MACE, a composite of all-cause death, myocardial infarction [MI], or ischemia-driven any revascularization) at 3 years. Results: The number of treated lesions per patient was 0.8±0.9 in the conservative group and 1.7±0.9 in the aggressive group (p=0.001). At 3 years, the conservative group had a significantly higher incidence of MACE than the aggressive group (13.8% vs. 9.3%; hazard ratio [HR], 1.49; 95% confidence interval [CI], 1.00–2.21; p=0.049), mainly driven by revascularization of target intermediate lesion (6.5% vs. 1.1%; HR, 5.69; 95% CI, 2.20–14.73;p<0.001). Between 1 and 3 years after the index procedure, compared to the aggressive group, the conservative group had significantly higher incidence of cardiac death or MI (3.2% vs.0.7%; HR, 4.34; 95% CI, 1.24–15.22; p=0.022) and ischemia-driven any revascularization. Conclusions For intermediate lesions, medical therapy alone, guided only by angiography, was associated with a higher risk of MACE at 3 years compared with performing PCI, mainly due to increased revascularization.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.