PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background and Objectives: Pediatric chronic rhinosinusitis (CRS) significantly affects children’s quality of life and learning abilities. This study aimed to evaluate the postoperative outcomes in pediatric patients who underwent functional endoscopic sinus surgery (FESS) for CRS. Methods: A retrospective review was conducted on pediatric patients who underwent FESS for CRS at 11 university hospitals. The inclusion criteria were patients under 20 years old with bilateral disease who were operated on between January 2005 and December 2021. The data collected included demographics, clinical history, blood tests, preoperative computed tomography, and preoperative and postoperative symptom control. The Kruskal-Wallis and Fisher exact tests were used to compare the quantitative and qualitative data, respectively. Results: In total, 213 patients were enrolled. The mean age was 13.4±3.0 years, and 145 (68.1%) were male. One hundred sixty-four patients (77.0%) had nasal polyps and 33 patients (15.5%) underwent revision FESS. The preoperative symptoms, in order of prevalence, included nasal obstruction (87.8%), rhinorrhea (71.8%), a sense of postnasal drip (58.2%), hyposmia (44.6%), cough (24.4%), and facial fullness (18.3%). These symptoms were significantly alleviated for up to 3 years after surgery (p<0.001). At the time of the last follow-up, 121 patients (56.8%) were controlled, 80 (37.6%) were partly controlled, and 12 (5.6%) were uncontrolled. Patients in the uncontrolled group had higher Lund-Mackay scores, longer follow-up durations, and more instances of revision surgery compared to those in the controlled and partly controlled groups. When age was categorized into three groups, those aged 16 years or older tended to have lower Lund-Mackay scores and better control. Conclusion FESS significantly improves both the postoperative symptoms and the long-term quality of life in pediatric CRS patients. Better symptom control is associated with older age and a lower disease burden.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background and Objectives: Pediatric chronic rhinosinusitis (CRS) significantly affects children’s quality of life and learning abilities. This study aimed to evaluate the postoperative outcomes in pediatric patients who underwent functional endoscopic sinus surgery (FESS) for CRS. Methods: A retrospective review was conducted on pediatric patients who underwent FESS for CRS at 11 university hospitals. The inclusion criteria were patients under 20 years old with bilateral disease who were operated on between January 2005 and December 2021. The data collected included demographics, clinical history, blood tests, preoperative computed tomography, and preoperative and postoperative symptom control. The Kruskal-Wallis and Fisher exact tests were used to compare the quantitative and qualitative data, respectively. Results: In total, 213 patients were enrolled. The mean age was 13.4±3.0 years, and 145 (68.1%) were male. One hundred sixty-four patients (77.0%) had nasal polyps and 33 patients (15.5%) underwent revision FESS. The preoperative symptoms, in order of prevalence, included nasal obstruction (87.8%), rhinorrhea (71.8%), a sense of postnasal drip (58.2%), hyposmia (44.6%), cough (24.4%), and facial fullness (18.3%). These symptoms were significantly alleviated for up to 3 years after surgery (p<0.001). At the time of the last follow-up, 121 patients (56.8%) were controlled, 80 (37.6%) were partly controlled, and 12 (5.6%) were uncontrolled. Patients in the uncontrolled group had higher Lund-Mackay scores, longer follow-up durations, and more instances of revision surgery compared to those in the controlled and partly controlled groups. When age was categorized into three groups, those aged 16 years or older tended to have lower Lund-Mackay scores and better control. Conclusion FESS significantly improves both the postoperative symptoms and the long-term quality of life in pediatric CRS patients. Better symptom control is associated with older age and a lower disease burden.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.