The shoulder joint is the most prone to dislocation in the whole body, and more than 95% of them are anterior dislocation. Improper treatment after the initial dislocation is easy to lead to recurrent anterior dislocation or anterior shoulder instability, and the outcomes following conservative treatment is poor. Anterior shoulder instability can damage the soft tissue structure and bone structure that maintain the stability of shoulder joint, among which bone structure is the most important factor affecting the stability of shoulder joint. Diagnosis should be combined with medical history, physical examination, and auxiliary examination. Currently, three-dimensional CT is the most commonly used auxiliary examination means. However, various bone defect measurement and preoperative evaluation methods based on three-dimensional CT and the glenoid track theory have their own advantages and disadvantages, and there is still a lack of gold standard. Currently, the mainstream treatment methods mainly include Bankart procedure, coracoid process transposition, glenoid reconstruction with free bone graft, Bankart combined with Remplissage procedure, and subscapular tendon binding tamponade, etc. Each of these procedures has its own advantages and disadvantages. For the diagnosis and treatment of anterior shoulder instability, there are still too many unknown, further research and exploration need to be studied.
Humans ; Shoulder Joint/surgery* ; Shoulder Dislocation/surgery* ; Shoulder ; Joint Instability/surgery* ; Scapula ; Joint Dislocations ; Recurrence ; Arthroscopy/methods*

OBJECTIVE: To investigate the clinical efficacy of posterior cervical pedicle screw short-segment internal fixation for the treatment of atlantoaxial fracture and dislocation. METHODS: The clinical data of 60 patients with atlantoaxial vertebral fracture and dislocation underwent surgery between January 2015 and January 2018 were retrospectively analyzed. The patients were divided into study group and control group according to different surgical methods. There were 30 patients in study group, including 13 males and 17 females, with an average age of (39.32±2.85) years old, were underwent short-segment internal fixation with posterior cervical pedicle screws. There were 30 patients in control group, including 12 males and 18 females, with an average age of (39.57±2.90) years old, were underwent posterior lamina clip internal fixation of the atlas. The operation time, intraoperative blood loss, postoperative ambulation time, hospitalization time and complications between two groups were recorded and compared. The pain visual analogue scale(VAS), Japanese Orthopedic Association(JOA) score of neurological function, and fusion status were evaluated between two groups. RESULTS: All patients were followed up for at least 12 months. The study group was better than control group in operation time, intraoperative blood loss, postoperative off-bed activity time, and hospital stay (P=0.000). One case of respiratory tract injury occurred in study group. In control group, 2 cases occurred incision infection, 3 cases occurred respiratory tract injury, and 3 cases occurred adjacent segmental joint degeneration. The incidence of complications in study group was lower than that in control group (χ²=4.705, P=0.030). At 1, 3, 7 days after operation, VAS of study group was lower than that of control group(P=0.000). At 1, 3 months after operation, JOA score of study group was higher than that of control group(P=0.000). At 12 months after operation, all the patients in the study group achieved bony fusion. In control group, there were 3 cases of poor bony fusion and 3 cases of internal fixation fracture, the incidence rate was 20.00%(6/30). The difference between two groups was statistically significant (χ²=4.629, P=0.031). CONCLUSION Posterior cervical short-segment pedicle screw fixation for atlantoaxial fracture and dislocation has the advantages of less trauma, shorter operation time, fewer complications, and less pain, and can promote the recovery of nerve function as soon as possible.
Male ; Female ; Humans ; Adult ; Pedicle Screws ; Retrospective Studies ; Fractures, Bone ; Fracture Fixation, Internal/methods* ; Joint Dislocations/surgery* ; Spinal Fractures/surgery* ; Treatment Outcome ; Postoperative Hemorrhage

OBJECTIVE: This study aims to examine the biomechanical effects of different reconstruction methods, including single-bundle, double-bundle anatomical reconstruction, and double-bundle truly anatomical reconstruction of the coracoclavicular ligament on the acromioclavicular joint using finite element analysis, to provide a theoretical basis for the clinical application of truly anatomical coracoclavicular ligament reconstruction. METHODS: One volunteer, aged 27 years old, with a height of 178 cm and a weight of 75 kg, was selected for CT scanning of the shoulder joint. Three-dimensional finite element models of single-bundle reconstruction, double-bundle anatomical reconstruction, and double-bundle truly anatomical reconstruction of coracoclavicular ligament were established by using Mimics17.0, Geomagic studio 2012, UG NX 10.0, HyperMesh 14.0 and ABAQUS 6.14 software. The maximum displacement of the middle point of the distal clavicle in the main loading direction and the maximum equivalent stress of the reconstruction device under different loading conditions were recorded and compared. RESULTS: The maximum forward displacement and the maximum backward displacement of the middle point of the distal clavicle in the double-bundle truly anatomic reconstruction were the lowest, which were 7.76 mm and 7.27 mm respectively. When an upward load was applied, the maximum displacement of the distal clavicle midpoint in the double-beam anatomic reconstruction was the lowest, which was 5.12 mm. Applying three different loads forward, backward, and upward, the maximum equivalent stress of the reconstruction devices in the double-beam reconstruction was lower than that in the single-beam reconstruction. The maximum equivalent stress of the trapezoid ligament reconstruction device in the double-bundle truly anatomical reconstruction was lower than that in the double-bundle anatomical reconstruction, which was 73.29 MPa, but the maximum equivalent stress of the conoid ligament reconstruction device was higher than that of the double-bundle anatomical reconstruction. CONCLUSION The truly anatomical reconstruction of coracoclavicular ligament can improve the horizontal stability of acromioclavicular joint and reduce the stress of the trapezoid ligament reconstruction device. It can be a good method for the treatment of acromioclavicular joint dislocation.
Humans ; Adult ; Acromioclavicular Joint/surgery* ; Finite Element Analysis ; Ligaments, Articular/surgery* ; Shoulder Joint/surgery* ; Plastic Surgery Procedures ; Joint Dislocations/surgery*

Humans ; Joint Dislocations/surgery* ; Spinal Fractures/surgery* ; Anesthesia, General ; Cervical Vertebrae/injuries* ; Spinal Fusion

Humans ; Joint Dislocations/surgery* ; Radius ; Elbow Joint

OBJECTIVES: This study aimed to use modified articular disc anchorage in treating old irreducible temporomandibular joint (TMJ) disc displacement with perforation and rupture, as well as to explore its efficacy. METHODS: A total of 31 patients (34 sides) with 47 TMJ disc perforations who underwent surgical treatment in the Affiliated Stomatolo-gical Hospital of Nanchang University from January 2018 to December 2021 were selected. According to the location of disc perforation, it has five types: posterior disc perforation (typeⅠ), anterior disc perforation (typeⅡ), lateral disc perforation (type Ⅲ), composite disc perforation, and destruction disc perforation. The modified methods of disc anchoring were divided into two types according to the location of the perforation. TypesⅠandⅢ disc perforation were trea-ted by posterior anchoring method. For posterior ancho-ring, a screw was implanted into the posterolateral side of the condylar neck, and the disc was fixed on the screw by horizontal mattress suture. TypeⅡdisc perforation and compo-site disc perforation combined typeⅡperforation were treated by anterior and posterior double-anchoring method. For anterior anchoring, anchor screws or holes were placed at the anterior edge of the condylar neck, and horizontal mattress suture was performed at the posterior edge of the anterior perforation with an anchor wire. The articular disc was then fixed on the anchor screws or holes. For the posterior anchoring method, it was the same as the previous one. Paired t test was used to analyze the visual analog scale (VAS), maximum interincisal opening (MIO), and TMJ disorder index (CMI) of the patient before surgery and 1, 3, and 6 months after surgery. Disk-condyle position relationship by magnetic resonance imaging and postoperative quality of life in postoperative were analyzed. RESULTS: The incidence of perforation was 41.2% (14/34) in typeⅠ, 11.8% (4/34) in typeⅡ, 8.8% (3/34) in typeⅢ, 29.4% (10/34) in composite type, and 8.8% (3/34) in destruction type. The VAS, MIO, and CMI at 3, 6 months after operation significantly improved compared with those before operation (P<0.05). The effective reduction rate of disc was 96.77% (30/31). The quality of life at 6 months after surgery was 47.22±2.13, and the rate of excellent evaluation was 96.4% (27/28). CONCLUSIONS Modified articular disc anchorage achieves a good curative effect for treating temporomandibular joint disc perforation and rupture. Nevertheless, its long-term effect requires further observation.
Humans ; Temporomandibular Joint Disc/surgery* ; Quality of Life ; Joint Dislocations/surgery* ; Temporomandibular Joint Disorders/surgery* ; Magnetic Resonance Imaging/methods* ; Temporomandibular Joint/pathology* ; Mandibular Condyle

OBJECTIVE: To summarize the progress of research related to the surgical treatment of recurrent patellar dislocation by peripatellar osteotomy in clinical practice, in order to provide reference for clinical treatment. METHODS: The recent literature on peripatellar osteotomy for recurrent patellar dislocation at home and abroad was reviewed, and the bony structural abnormalities, imaging diagnosis, and treatment status were summarized. RESULTS: Abnormalities in the bony anatomy of the lower limb and poor alignment lead to patellofemoral joint instability through the quadriceps pulling force line and play an important role in the pathogenesis of recurrent patellar dislocation. Identifying the source of the deformity and intervening with peripatellar osteotomy to restore the biomechanical structure of the patellofemoral joint can reduce the risk of soft tissue surgical failure, delay joint degeneration, and achieve the target of treatment. CONCLUSION In the clinical diagnosis and treatment of recurrent patellar dislocation, the factors causing patellofemoral joint instability should be comprehensively evaluated to guide the selection of surgery and personalized treatment.
Humans ; Patellar Dislocation/surgery* ; Joint Dislocations ; Joint Instability/surgery* ; Lower Extremity ; Osteotomy

OBJECTIVE: To compare the biomechanical differences among the five internal fixation modes in treatment of Day type Ⅱ crescent fracture dislocation of pelvis (CFDP), and find an internal fixation mode which was the most consistent with mechanical principles. METHODS: Based on the pelvic CT data of a healthy adult male volunteer, a Day type Ⅱ CFDP finite element model was established by using Mimics 17.0, ANSYS 12.0-ICEM, Abaqus 2020, and SolidWorks 2012 softwares. After verifying the validity of the finite element model by comparing the anatomical parameters with the three-dimensional reconstruction model and the mechanical validity verification, the fracture and dislocated joint of models were fixed with S ₁ sacroiliac screw combined with 1 LC-Ⅱ screw (S ₁+LC-Ⅱ group), S ₁ sacroiliac screw combined with 2 LC-Ⅱ screws (S ₁+2LC-Ⅱ group), S ₁ sacroiliac screw combined with 2 posterior iliac screws (S ₁+2PIS group), S ₁ and S ₂ sacroiliac screws combined with 1 LC-Ⅱ screw (S ₁+S ₂+LC-Ⅱ group), S ₂-alar-iliac (S ₂AI) screw combined with 1 LC-Ⅱ screw (S ₂AI+LC-Ⅱ group), respectively. After each internal fixation model was loaded with a force of 600 N in the standing position, the maximum displacement of the crescent fracture fragments, the maximum stress of the internal fixation (the maximum stress of the screw at the ilium fracture and the maximum stress of the screw at the sacroiliac joint), sacroiliac joint displacement, and bone stress distribution around internal fixation were observed in 5 groups. RESULTS: The finite element model in this study has been verified to be effective. After loading 600 N stress, there was a certain displacement of the crescent fracture of pelvis in each internal fixation model, among which the S ₁+LC-Ⅱ group was the largest, the S ₁+2LC-Ⅱ group and the S ₁+2PIS group were the smallest. The maximum stress of the internal fixation mainly concentrated at the sacroiliac joint and the fracture line of crescent fracture. The maximum stress of the screw at the sacroiliac joint was the largest in the S ₁+LC-Ⅱ group and the smallest in the S ₂AI+LC-Ⅱ group. The maximum stress of the screw at the ilium fracture was the largest in the S ₁+2PIS group and the smallest in the S ₁+2LC-Ⅱ group. The displacement of the sacroiliac joint was the largest in the S ₁+LC-Ⅱ group and the smallest in the S ₁+S ₂+LC-Ⅱ group. In each internal fixation model, the maximum stress around the sacroiliac screws concentrated on the contact surface between the screw and the cortical bone, the maximum stress around the screws at the iliac bone concentrated on the cancellous bone of the fracture line, and the maximum stress around the S ₂AI screw concentrated on the cancellous bone on the iliac side. The maximum bone stress around the screws at the sacroiliac joint was the largest in the S ₁+LC-Ⅱ group and the smallest in the S ₂AI+LC-Ⅱ group. The maximum bone stress around the screws at the ilium was the largest in the S ₁+2PIS group and the smallest in the S ₁+LC-Ⅱ group. CONCLUSION For the treatment of Day type Ⅱ CFDP, it is recommended to choose S ₁ sacroiliac screw combined with 1 LC-Ⅱ screw for internal fixation, which can achieve a firm fixation effect without increasing the number of screws.
Adult ; Male ; Humans ; Finite Element Analysis ; Fracture Fixation, Internal/methods* ; Fractures, Bone/surgery* ; Pelvis ; Spinal Fractures/surgery* ; Fracture Dislocation/surgery* ; Joint Dislocations/surgery* ; Biomechanical Phenomena

OBJECTIVE: To evaluate the operability and effectiveness of a self-developed patellar bone canal locator (hereinafter referred to as "locator") in the reconstruction of the medial patellofemoral ligament (MPFL). METHODS: A total of 38 patients with recurrent patellar dislocation who met the selection criteria admitted between January 2022 and December 2022 were randomly divided into study group (the patellar canal was established with a locator during MPFL reconstruction) and control group (no locator was used in MPFL reconstruction), with 19 cases in each group. There was no significant difference in baseline data between the two groups ( P>0.05), such as gender, age, body mass index, disease duration, patella Wiberg classification, constituent ratio of cartilage injury, Caton index, tibia tubercle-trochlear groove, and preoperative Lysholm score, Kujal score, Tegner score, visual analogue scale (VAS) score, and so on. The Lysholm score, Kujal score, Tegner score, and VAS score were used to evaluate knee joint function before operation and at 3 days,1 month, 3 months, and 6 months after operation. The ideal prepatellar cortical thickness and canal length were measured before operation, and the actual prepatellar cortical thickness and canal length after operation were also measured, and D1 (the distance between the ideal entrance and the actual entrance), D2 (the ideal canal length minus the actual canal length), D3 (the ideal prepatellar cortical thickness minus the actual prepatellar cortical thickness) were calculated. RESULTS: Patients in both groups were followed up 6-8 months (mean, 6.7 months). The incision length and intraoperative blood loss in the study group were smaller than those in the control group, but the operation time was longer than that in the control group, the differences were significant ( P<0.05). There was no complication such as incision infection, effusion, and delayed healing in both groups, and no further dislocation occurred during follow-up. One patient in the study group had persistent pain in the anserine area after operation, and the symptoms were relieved after physiotherapy. The VAS score of the two groups increased significantly at 3 days after operation, and gradually decreased with the extension of time; the change trends of Lysholm score, Kujal score, and Tegner score were opposite to VAS score. Except that the Lysholm score and Kujal score of the study group were higher than those of the control group at 3 days after operation, and the VAS score of the study group was lower than that of the control group at 3 days and 1 month after operation, the differences were significant ( P<0.05), there was no significant difference in the scores between the two groups at other time points ( P>0.05). Patellar bone canal evaluation showed that there was no significant difference in preoperative simulated ideal canal length, prepatellar cortical thickness, and postoperative actual canal length between the two groups ( P>0.05). The postoperative actual prepatellar cortical thickness of the study group was significantly smaller than that of the control group ( P<0.05). D1 and D3 in the study group were significantly higher than those in control group ( P<0.05), but there was no significant difference in D2 between the two groups ( P>0.05). CONCLUSION The locator can improve the accuracy of MPFL reconstruction surgery, reduce the possibility of intraoperative damage to the articular surface of patella and postoperative patellar fractures.
Humans ; Patella/surgery* ; Patellar Dislocation/surgery* ; Patellofemoral Joint/surgery* ; Knee Joint/surgery* ; Joint Dislocations ; Ligaments, Articular/surgery*

OBJECTIVE: To explore the effectiveness of the percutaneous parallel screw fixation via the posterolateral "safe zone" for Hawkins type Ⅰ-Ⅲ talar neck fractures. METHODS: A retrospective analysis was conducted on the clinical data from 35 patients who met the selection criteria of talar neck fractures between January 2019 and June 2021. According to the surgical method, they were divided into a study group (14 cases, using percutaneous posterolateral "safe zone" parallel screw fixation) and a control group (21 cases, using traditional open reduction and anterior cross screw internal fixation). There was no significant difference in gender, age, affected side, Hawkins classification, and time from injury to operation between the two groups ( P>0.05). The operation time, bone healing time, complications, and Hawkins sign were recorded, and the improvement of pain and ankle-foot function were evaluated by visual analogue scale (VAS) score and American Orthopaedic Foot and Ankle Society (AOFAS) ankle and hindfoot score at last follow-up. The overall quality of life was assessed by the short form of 12-item health survey (SF-12), which was divided into physical and psychological scores; and the satisfaction of patients was evaluated by the 5-point Likert scale. RESULTS: The operation time in the study group was significantly shorter than that in the control group ( P<0.05). All patients werefollowed up 13-35 months, with an average of 20.6 months; there was no significant difference in the follow-up time between the two groups ( P>0.05). The time of bone healing in the study group was shorter than that in the control group, and the positive rate of Hawkins sign (83.33%) was higher than that in the control group (33.33%), and the differences were significant ( P<0.05). In the control group, there were 2 cases of incision delayed healing, 7 cases of avascular necrosis of bone, 3 cases of joint degeneration, 1 case of bone nonunion, and 3 cases of internal fixation irritation; while in the study group, there were only 2 cases of joint degeneration, and there was a significant difference in the incidence of complications between the two groups ( P<0.05). At last follow-up, there was no significant difference in VAS score between the two groups ( P>0.05), but the SF-12 physical and psychological scores, AOFAS ankle and hindfoot scores, and patients' satisfaction in the study group were significantly better than those in the control group ( P<0.05). CONCLUSION The treatment of Hawkins type Ⅰ-Ⅲ talar neck fractures with percutaneous parallel screw fixation via the posterolateral "safe zone" can achieve better effectiveness than traditional open surgery, with the advantages of less trauma, fewer complications, faster recovery, and higher patient satisfaction.
Humans ; Retrospective Studies ; Quality of Life ; Fractures, Bone/surgery* ; Fracture Fixation, Internal/methods* ; Bone Screws ; Joint Dislocations ; Treatment Outcome