Purpose: Patient-derived cells (PDCs) and patient-derived organoids (PDOs) are complementary preclinical models widely used in translational cancer research. However, their molecular and functional differences have not been systematically characterized. This study established and analyzed paired PDC and PDO models derived from the same gastric cancer ascites to delineate platform-dependent molecular and functional profiles. Materials and Methods: Malignant ascites or pleural fluid obtained from 6 patients with advanced gastric cancer were used to establish paired PDC and PDO models. All pairs underwent comprehensive multi-omics profiling, integrating genomic, transcriptomic, and proteomic data. Phenotypic characterization included morphological, histological, proliferative, and cell cycle analyses. Drug sensitivity assays were performed using 4 chemotherapeutic agents commonly used to treat gastric cancer. Results: The 6 paired PDC and PDO models exhibited distinct morphological characteristics.Whole-genome analyses demonstrated high concordance among primary tumors, PDCs, and PDOs, confirming tumor representation across platforms. Multi-omics profiling identified platform-dependent molecular signatures; PDOs were enriched for extracellular matrix remodeling and stemness, whereas PDCs displayed proliferation- and immune-related signatures. Clinically relevant biomarkers, including HER2 and MET alterations, were concordant with primary tumors. Notably, drug responses differed between platforms and patients, indicating platform-dependent and patient-specific chemosensitivity. Conclusions Paired PDC and PDO models derived from the same patients preserved core patient-specific tumor characteristics while exhibiting distinct molecular and functional profiles. These findings underscore the culture platform as a critical determinant of experimental outcomes and therapeutic responses. Therefore, careful selection of an appropriate preclinical model is essential to accurately address biological questions and optimize precision oncology strategies.

Purpose: Adjuvant pembrolizumab improved disease-free survival (DFS) and overall survival (OS) versus placebo in participants with renal cell carcinoma (RCC) at increased risk of recurrence after nephrectomy in the global phase 3 KEYNOTE-564 study. This post hoc subgroup analysis evaluated the efficacy and safety of adjuvant pembrolizumab in East Asian (Japan, South Korea, and Taiwan) participants enrolled in KEYNOTE-564. Materials and Methods: Eligible participants were randomly assigned 1:1 to receive adjuvant pembrolizumab 200 mg or placebo intravenously every 3 weeks for ≤ 17 cycles. The primary endpoint was DFS by investigator assessment. OS was a key secondary endpoint. Safety was a secondary endpoint. Results: The East Asian subgroup included 126 participants (pembrolizumab, n=58; placebo, n=68). Median follow-up was 62.1 months (range, 49.6 to 73.0 months). Hazard ratio for DFS with pembrolizumab versus placebo was 0.70 (95% confidence interval 0.41 to 1.20). Median DFS was not reached with pembrolizumab versus 58.8 months with placebo; estimated 48-month rate was 61.3% versus 51.2%. Hazard ratio for OS was 0.47 (95% confidence interval, 0.15 to 1.49). Median OS was not reached with pembrolizumab and placebo; estimated 48-month rate was 94.8% versus 91.2%. Treatment-related adverse events occurred in 70.7% of participants (29.3% grade 3 or 4) receiving pembrolizumab and 36.8% of participants (0.0% grade 3 or 4) receiving placebo. No pembrolizumab-related deaths occurred. Conclusion In the KEYNOTE-564 East Asian subgroup, adjuvant pembrolizumab provided DFS and OS benefits versus placebo and had a safety profile consistent with the global results. These results further support pembrolizumab as adjuvant treatment for East Asian patients with RCC at increased risk of recurrence after nephrectomy.

Background: This study aimed to identify the clinical characteristics of multidrug-resistant/ rifampicin-resistant tuberculosis (MDR/RR-TB) in the Republic of Korea. Methods: Data of notified people with tuberculosis between July 2018 and December 2021 were retrieved from the Korea Tuberculosis Cohort database. MDR/RR-TB was further categorized according to isoniazid susceptibility as follows: multidrug-resistant tuberculosis (MDR-TB), rifampicin-monoresistant tuberculosis (RMR-TB), and RR-TB if susceptibility to isoniazid was unknown. Multivariable logistic regression analysis was conducted to identify the factors associated with MDR/RR-TB. Results: Between 2018 and 2021, the proportion of MDR/RR-TB cases among all TB cases and TB cases with known drug susceptibility test results was 2.1% (502/24,447). The proportions of MDR/RR-TB and MDR-TB cases among TB cases with known drug susceptibility test results were 3.3% (502/15,071) and 1.9% (292/15,071), respectively. Among all cases of rifampicin resistance, 31.7% (159/502) were RMR-TB and 10.2% (51/502) were RR-TB. Multivariable logistic regression analyses revealed that younger age, foreigners, and prior tuberculosis history were significantly associated with MDR/ RR-TB. Conclusion Rapid identification of rifampicin resistance targeting the high-risk populations, such as younger generations, foreign-born individuals, and previously treated patients are necessary for patient-centered care.

Background: s/Aims: While large-for-size syndrome is uncommon in liver transplantation (LT), it can result in fatal outcome. To prevent such fatality, we manufactured 3D-printed intra-abdominal cavity replicas to provide intuitive understanding of the sizes of the graft and the patient’s abdomen in patients with small body size between July 2020 and February 2022. Methods: Clinical outcomes were compared between patients using our 3D model during LT, and patients who underwent LT without 3D model by using 1 : 5 ratio propensity score-matched analysis. Results: After matching, a total of 20 patients using 3D-printed abdominal cavity model and 100 patients of the control group were included in this study. There were no significant differences in 30-day postoperative complication (50.0% vs. 64.0%, p = 0.356) and the incidence of large-for-size syndrome (0% vs. 7%, p = 0.599). Overall survival of the 3D-printed group was similar to that of the control group (p = 0.665), but graft survival was significantly superior in the 3D-printed group, compared to the control group (p = 0.034). Conclusions Since it showed better graft survival, as well as low cost and short production time, our 3D-printing protocol can be a feasible option for patients with small abdominal cavity to prevent large-for-size syndrome after LT.

Background: The increasing incidence and mortality rates of tuberculosis among older individuals who suffer from multiple morbidities and are vulnerable to malnutrition are major obstacles to efforts to eradicate tuberculosis in the Republic of Korea. Herein, we identified the factors associated with mortality during anti-tuberculosis treatment in patients with pulmonary tuberculosis. Methods: We conducted a case-control study and extracted data from the database of a multi-center prospective observational cohort study in Korea. Among the participants with rifampicin-susceptible pulmonary tuberculosis, the survival group was defined as those who successfully completed treatment within one year, whereas the mortality group was defined as those who died during treatment. Univariable and multivariable logistic regression analyses were performed to identify factors associated with TB mortality. Results: Among 1,119 participants with pulmonary TB registered between 2019 and 2021, 799 and 59 were grouped in the survival and mortality groups, respectively. Age, positive smear results, alarming symptoms, nutrition risk score, Charlson comorbidity index score, and initial standard treatment regimen were significant based on univariable analysis and were selected for the multivariable logistic regression model. Nutrition risk score (adjusted odds ratio, 2.44; 95% confidence interval, 1.72–3.48) and Charlson comorbidity index score (adjusted odds ratio, 1.62; 95% confidence interval, 1.35–1.94) remained statistically significant in the multivariate analysis. Conclusion Nutritional status and comorbidities at baseline were identified as important factors associated with mortality in patients with pulmonary tuberculosis.

Background: s/Aims: While large-for-size syndrome is uncommon in liver transplantation (LT), it can result in fatal outcome. To prevent such fatality, we manufactured 3D-printed intra-abdominal cavity replicas to provide intuitive understanding of the sizes of the graft and the patient’s abdomen in patients with small body size between July 2020 and February 2022. Methods: Clinical outcomes were compared between patients using our 3D model during LT, and patients who underwent LT without 3D model by using 1 : 5 ratio propensity score-matched analysis. Results: After matching, a total of 20 patients using 3D-printed abdominal cavity model and 100 patients of the control group were included in this study. There were no significant differences in 30-day postoperative complication (50.0% vs. 64.0%, p = 0.356) and the incidence of large-for-size syndrome (0% vs. 7%, p = 0.599). Overall survival of the 3D-printed group was similar to that of the control group (p = 0.665), but graft survival was significantly superior in the 3D-printed group, compared to the control group (p = 0.034). Conclusions Since it showed better graft survival, as well as low cost and short production time, our 3D-printing protocol can be a feasible option for patients with small abdominal cavity to prevent large-for-size syndrome after LT.

Background: This study aimed to identify the clinical characteristics of multidrug-resistant/ rifampicin-resistant tuberculosis (MDR/RR-TB) in the Republic of Korea. Methods: Data of notified people with tuberculosis between July 2018 and December 2021 were retrieved from the Korea Tuberculosis Cohort database. MDR/RR-TB was further categorized according to isoniazid susceptibility as follows: multidrug-resistant tuberculosis (MDR-TB), rifampicin-monoresistant tuberculosis (RMR-TB), and RR-TB if susceptibility to isoniazid was unknown. Multivariable logistic regression analysis was conducted to identify the factors associated with MDR/RR-TB. Results: Between 2018 and 2021, the proportion of MDR/RR-TB cases among all TB cases and TB cases with known drug susceptibility test results was 2.1% (502/24,447). The proportions of MDR/RR-TB and MDR-TB cases among TB cases with known drug susceptibility test results were 3.3% (502/15,071) and 1.9% (292/15,071), respectively. Among all cases of rifampicin resistance, 31.7% (159/502) were RMR-TB and 10.2% (51/502) were RR-TB. Multivariable logistic regression analyses revealed that younger age, foreigners, and prior tuberculosis history were significantly associated with MDR/ RR-TB. Conclusion Rapid identification of rifampicin resistance targeting the high-risk populations, such as younger generations, foreign-born individuals, and previously treated patients are necessary for patient-centered care.

Background: s/Aims: While large-for-size syndrome is uncommon in liver transplantation (LT), it can result in fatal outcome. To prevent such fatality, we manufactured 3D-printed intra-abdominal cavity replicas to provide intuitive understanding of the sizes of the graft and the patient’s abdomen in patients with small body size between July 2020 and February 2022. Methods: Clinical outcomes were compared between patients using our 3D model during LT, and patients who underwent LT without 3D model by using 1 : 5 ratio propensity score-matched analysis. Results: After matching, a total of 20 patients using 3D-printed abdominal cavity model and 100 patients of the control group were included in this study. There were no significant differences in 30-day postoperative complication (50.0% vs. 64.0%, p = 0.356) and the incidence of large-for-size syndrome (0% vs. 7%, p = 0.599). Overall survival of the 3D-printed group was similar to that of the control group (p = 0.665), but graft survival was significantly superior in the 3D-printed group, compared to the control group (p = 0.034). Conclusions Since it showed better graft survival, as well as low cost and short production time, our 3D-printing protocol can be a feasible option for patients with small abdominal cavity to prevent large-for-size syndrome after LT.