Juvenile idiopathic arthritis(JIA)is the most prevalent joint disease in childhood.The disease is defined as arthritis of unknown etiology,involving one or more joints,with onset before the age of 16 years and symptomatic duration of more than 6 weeks.Temporomandibular joint(TMJ)arthritis is a common manifestation of JIA,but it often develops insidiously.Failing to diag-nose and treat it promptly may lead to maxillofacial dysfunction and dentofacial deformity,and negatively affect the patient's quality of life.Therefore,early diagnosis and disease management of TMJ arthritis are crucial.This article reviews the occurrence of JIA-TMJ arthritis and its progress in clinical diagnosis and disease treatment in recent years,aiming to provide some reference for den-tists in the clinical diagnosis and treatment of JIA.

Bone defect repair is an urgent problem in the field of orthopedics,and numerous researchers are working to develop more effective treatment plans.The accurate evaluation of bone repair after surgery is a crucial step.In line with the development of computed tomography(CT)imaging,dual-energy CT imaging has shown significant advantages in analyzing bone composition and reducing metal artifacts.This article reviews the application of dual-energy CT imaging for the evaluation of bone repair in animals.

Objective To summarize the clinical experience of using 3D planar guide plate combined with bundle diameter technology for extracorporeal pre-fenestration in treating complex thoracoabdominal aortic diseases.Methods The clinical data of 31 patients with complex thoracoabdominal aortic diseases,who were treated with 3D planar guide plate combined with bundle diameter technology of extracorporeal pre-fenestration at the First Affiliated Hospital of Soochow University of China from January 2017 to February 2024,were retrospectively analyzed.The patients' preoperative thin-layer chest and abdominal vascular CTA data were imported into specialized software and to create a 3D planar guide plate.Under the guidance of 3D planar guide plate technology,precise extracorporeal pre-fenestration of aortic covered stent was performed,and combined with bundle diameter technology the endovascular repair of complex thoracoabdominal aortic disease was accomplished.Results Successful operation was accomplished in all patients,and two patients had failed visceral artery reconstruction surgery.The median follow-up time was 55 months,with a technical success rate of 97.6％.The postoperative follow-up blood flow patency rate was 100％,and the phase Ⅰ patency rate of branch arteries was 98％.Three patients experienced internal leakage after surgery,and none of them developed paraplegia or died during the perioperative period.Conclusion In treating complex thoracoabdominal aortic diseases,the use of 3D planar guide plate combined with bundle diameter technology of extracorporeal pre-fenestration is simple,safe and effective,with good short-term therapeutic effect,although its long-term efficacy need to be further investigated.

Juvenile idiopathic arthritis(JIA)is the most prevalent joint disease in childhood.The disease is defined as arthritis of unknown etiology,involving one or more joints,with onset before the age of 16 years and symptomatic duration of more than 6 weeks.Temporomandibular joint(TMJ)arthritis is a common manifestation of JIA,but it often develops insidiously.Failing to diag-nose and treat it promptly may lead to maxillofacial dysfunction and dentofacial deformity,and negatively affect the patient's quality of life.Therefore,early diagnosis and disease management of TMJ arthritis are crucial.This article reviews the occurrence of JIA-TMJ arthritis and its progress in clinical diagnosis and disease treatment in recent years,aiming to provide some reference for den-tists in the clinical diagnosis and treatment of JIA.

Bone defect repair is an urgent problem in the field of orthopedics,and numerous researchers are working to develop more effective treatment plans.The accurate evaluation of bone repair after surgery is a crucial step.In line with the development of computed tomography(CT)imaging,dual-energy CT imaging has shown significant advantages in analyzing bone composition and reducing metal artifacts.This article reviews the application of dual-energy CT imaging for the evaluation of bone repair in animals.

Objective:To assess the effect of using different thicknesses of reconstruction layer and different thicknesses of region of interest (ROI) on the results of vertebral bone mineral density (BMD) values that were measured by quantitative computed tomography (QCT). Methods:A total of 100 patients who underwent QCT screening for opportunistic osteoporosis between May and September 2021 at the First Affiliated Hospital of Zhengzhou University were retrospectively collected. Images that the thicknesses of QCT reconstruction layer were respectively 1 and 5 mm were transferred to the QCT Pro workstation,and ROI thicknesses were adjusted to 5,7,and 9 mm,respectively. The average BMD values of QCT measurements were recorded under different thicknesses of reconstruction layer and different ROI thicknesses. Then,the effects of the choose of different thicknesses of reconstruction layer and the different ROI thicknesses on BMD values that were measured by QCT were analyzed. Results:The average BMD values of 1 mm and 5 mm thicknesses of reconstruction layer were respectively (117.41±45.97) mg/cm3 and (118.77±44.84) mg/cm3 when ROI thickness was 5 mm,with a statistically significant difference (t=-2.283,P<0.05). The average BMD values of 1 mm and 5 mm thicknesses of reconstruction layer were respectively (116.38±46.06) mg/cm3 and (119.06±44.55) mg/cm3 when the ROI thickness was 7mm,and the difference was statistically significant (t=-3.280,P<0.05). The average BMD values of 1 mm and 5 mm thicknesses of reconstruction layer were respectively (116.25±45.36) mg/cm3 and (120.12±44.10) mg/cm3 when the ROI thickness was 9 mm,and the difference was statistically significant (t=-5.841,P<0.001). The differences in BMD measurement values among 5,7 and 9 mm ROI thicknesses were not statistically significant when the thicknesses of reconstruction layer were respectively 1 and 5 mm. Conclusion:There is an effect of the thickness of QCT reconstruction layer on average BMD measurement values,and 1 mm thickness of reconstruction layer is more suitable to clinical application,while there is not significant effect in ROI thickness on average BMD measurement value of QCT. In clinical application,it is feasible to adjust ROI thickness according to actual situation so as to avoid the effect caused by some factors such as fracture or vertebral implants.

Objective To observe the correlations of artificial intelligence(AI)measured parameters on anteroposterior and lateral spinal X-ray films with the severity of adolescent idiopathic scoliosis(AIS).Methods Totally 1 786 AIS patients were retrospectively enrolled.Parameters including Cobb angle(CA),coronal balance distance(CBD),T1 slope(T1S),pelvic tilt(PT),sacral slope(SS),apical vertebral translation(AVT),thoracic trunk shift(TTS),thoracic kyphosis(TK)and sagittal vertical axis(SVA)on anteroposterior and lateral spinal X-ray films were measured using uAI DR scoliosis analysis system.The severity of AIS was evaluated according to CA,and the correlations between other parameters and the severity of AIS were explored.The above parameters were compared under different severity levels and coronal/sagittal equilibrium states.Multivariate logistic regression analysis was performed to screen the independent impact factors on the severity of AIS.Results Significant differences of the above parameters were found among different severity levels except for SVA(all P＜0.001).With the aggravation of AIS,CA,CBD,AVT and TTS increased successively(all P＜0.001).T1S of severe AIS was higher than that of mild and moderate AIS(both P＜0.001),PT and SS of moderate and severe AIS were all bigger,while their TK were smaller than those of mild AIS(all P＜0.001).Significant differences of CA,T1S,PT,SS,AVT,TTS and TK were found between coronal balanced and imbalanced AIS(all P＜0.05),while of TK were found between sagittal balanced and unbalanced AIS(P=0.026).CBD,T1S,PT,SS,AVT and TTS were all positively correlated(r,=0.136-0.606,all P＜0.001),while TK was negatively correlated(r,=—0.404,P＜0.001)with the severity of AIS.T1S,AVT and TTS were all independent impact factors of the severity of AIS(all P＜0.001).Conclusion Among AI measured parameters on anteroposterior and lateral spinal X-ray films,CBD,T1S,PT,SS,AVT and TTS were positively correlated,while TK was negatively correlated with the severity of AIS.

Objective:To assess the effect of using different thicknesses of reconstruction layer and different thicknesses of region of interest (ROI) on the results of vertebral bone mineral density (BMD) values that were measured by quantitative computed tomography (QCT). Methods:A total of 100 patients who underwent QCT screening for opportunistic osteoporosis between May and September 2021 at the First Affiliated Hospital of Zhengzhou University were retrospectively collected. Images that the thicknesses of QCT reconstruction layer were respectively 1 and 5 mm were transferred to the QCT Pro workstation,and ROI thicknesses were adjusted to 5,7,and 9 mm,respectively. The average BMD values of QCT measurements were recorded under different thicknesses of reconstruction layer and different ROI thicknesses. Then,the effects of the choose of different thicknesses of reconstruction layer and the different ROI thicknesses on BMD values that were measured by QCT were analyzed. Results:The average BMD values of 1 mm and 5 mm thicknesses of reconstruction layer were respectively (117.41±45.97) mg/cm3 and (118.77±44.84) mg/cm3 when ROI thickness was 5 mm,with a statistically significant difference (t=-2.283,P<0.05). The average BMD values of 1 mm and 5 mm thicknesses of reconstruction layer were respectively (116.38±46.06) mg/cm3 and (119.06±44.55) mg/cm3 when the ROI thickness was 7mm,and the difference was statistically significant (t=-3.280,P<0.05). The average BMD values of 1 mm and 5 mm thicknesses of reconstruction layer were respectively (116.25±45.36) mg/cm3 and (120.12±44.10) mg/cm3 when the ROI thickness was 9 mm,and the difference was statistically significant (t=-5.841,P<0.001). The differences in BMD measurement values among 5,7 and 9 mm ROI thicknesses were not statistically significant when the thicknesses of reconstruction layer were respectively 1 and 5 mm. Conclusion:There is an effect of the thickness of QCT reconstruction layer on average BMD measurement values,and 1 mm thickness of reconstruction layer is more suitable to clinical application,while there is not significant effect in ROI thickness on average BMD measurement value of QCT. In clinical application,it is feasible to adjust ROI thickness according to actual situation so as to avoid the effect caused by some factors such as fracture or vertebral implants.

Objective To observe the correlations of artificial intelligence(AI)measured parameters on anteroposterior and lateral spinal X-ray films with the severity of adolescent idiopathic scoliosis(AIS).Methods Totally 1 786 AIS patients were retrospectively enrolled.Parameters including Cobb angle(CA),coronal balance distance(CBD),T1 slope(T1S),pelvic tilt(PT),sacral slope(SS),apical vertebral translation(AVT),thoracic trunk shift(TTS),thoracic kyphosis(TK)and sagittal vertical axis(SVA)on anteroposterior and lateral spinal X-ray films were measured using uAI DR scoliosis analysis system.The severity of AIS was evaluated according to CA,and the correlations between other parameters and the severity of AIS were explored.The above parameters were compared under different severity levels and coronal/sagittal equilibrium states.Multivariate logistic regression analysis was performed to screen the independent impact factors on the severity of AIS.Results Significant differences of the above parameters were found among different severity levels except for SVA(all P＜0.001).With the aggravation of AIS,CA,CBD,AVT and TTS increased successively(all P＜0.001).T1S of severe AIS was higher than that of mild and moderate AIS(both P＜0.001),PT and SS of moderate and severe AIS were all bigger,while their TK were smaller than those of mild AIS(all P＜0.001).Significant differences of CA,T1S,PT,SS,AVT,TTS and TK were found between coronal balanced and imbalanced AIS(all P＜0.05),while of TK were found between sagittal balanced and unbalanced AIS(P=0.026).CBD,T1S,PT,SS,AVT and TTS were all positively correlated(r,=0.136-0.606,all P＜0.001),while TK was negatively correlated(r,=—0.404,P＜0.001)with the severity of AIS.T1S,AVT and TTS were all independent impact factors of the severity of AIS(all P＜0.001).Conclusion Among AI measured parameters on anteroposterior and lateral spinal X-ray films,CBD,T1S,PT,SS,AVT and TTS were positively correlated,while TK was negatively correlated with the severity of AIS.

Cannabis is a traditional industrial crop that has been used for thousands of years for medicines， foods， and textiles. Due to its active components， cannabis has attracted extensive attention in the pharmaceutical industry at home and abroad. Currently， 55 countries around the world have legalized medical marijuana， and two provinces in China， Yunnan and Heilongjiang， can legally cultivate and process industrial hemp. However， the low content of cannabidiol （CBD） in industrial hemp is not conducive to subsequent development and research. Based on this， the author took medicinal cannabis， defined by CHEN Shilin′s team as tetrahydrocannabinol （THC） content<0.3% and high CBD content， as the research object， and reviewed four aspects of the active ingredients of medicinal cannabis， the isolation and purification technology of CBD， the development and application of cannabinoid-related products and the breeding methods of medicinal cannabis. Through combing， it is suggested that subsequent research should focus on excavation of genes of CBD synthesis， molecular breeding of evolutionary cannabis by gene editing technology， development of green extraction process， discovery of more active ingredients， and high yield of CBD through synthetic biology and cell-free system， with a view to provide reference for the development and application of medicinal cannabis in China.