Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

In 2009,the World Health Organization included snakebite on the list of neglected tropical diseases,acknowledging it as a common occupational hazard for farmers,plantation workers,and others,causing tens of thousands of deaths and chronic physical disabilities every year.This guideline aims to provide practical information to help clinical professionals evaluate and treat snakebite victims.These recommendations are based on clinical experience and clinical research evidence.This guideline focuses on the following topics:snake venom,clinical manifestations,auxiliary examination,diagnosis,treatments,and prevention.

Objective:To compare the mechanical properties between our self-designed axially controlled compression spinal rod (ACCSR) and conventional spinal rod (CSR) for lumbar spondylolysis (LS).Methods:This study selected 36 ACCSRs (the ACCSR group) and 36 CSRs (the CSR group), both of which were in a diameter of 6.0 mm and manufactured in the same batch. They were subjected respectively to biomechanical tests of spinal rod and pedicle screw-rod internal fixation system. In spinal rod tests: the stiffness and yield load of the spinal rods were calculated using four-point bending tests ( n=7) and comparisons were made between the 2 groups; spinal rod fatigue tests ( n=8) recorded the successful compression loads after 2.5 million cycles of loading and compared them with the maximum force at the isthmus of a normal adult's unilateral lumbar spine (198.72 N). In tests of the pedicle screw-rod internal fixation system, the axial compression tests ( n=7) measured the axial gripping capacity, the axial torsion tests ( n=7) the torsional gripping capacity, and the lateral compression tests ( n=7) the stiffness and yield load of pedicle screws in the 2 groups respectively. Results:The stiffness [(1,543.37±61.41) N/mm] and yield load [1,338.57 (1,282.00, 1,353.80) N] of ACCSR group were significantly smaller than those of CSR group [(3,797.63±156.15) N/mm and 4,059.95 (3,813.80, 4,090.89) N] ( P<0.05). The spinal rod fatigue tests showed that the respective loads of CSR and ACCSR passing the 2.5 million fatigue tests were 640.00 N and 320.00 N, both larger than the maximum force at the unilateral lumbar isthmus of a normal adult (198.72 N). There were no significant differences between the ACCSR group and the CSR group in the axial gripping capacity and torsional gripping capacity, as well as in stiffness and yield load of screws between the 2 groups ( P>0.05). Conclusions:In fixation of LS, although the yield load, stiffness and fatigue resistance of ACCSR are inferior to those of CSR, the biomechanical properties of the two sets of pedicle screw-rod internal fixation system are comparable. The fatigue resistance of ACCSR can meet the stress requirements of the normal human isthmus.

RBM46 is a germ cell-specific RNA-binding protein required for gametogenesis, but the targets and molecular functions of RBM46 remain unknown. Here, we demonstrate that RBM46 binds at specific motifs in the 3'UTRs of mRNAs encoding multiple meiotic cohesin subunits and show that RBM46 is required for normal synaptonemal complex formation during meiosis initiation. Using a recently reported, high-resolution technique known as LACE-seq and working with low-input cells, we profiled the targets of RBM46 at single-nucleotide resolution in leptotene and zygotene stage gametes. We found that RBM46 preferentially binds target mRNAs containing GCCUAU/GUUCGA motifs in their 3'UTRs regions. In Rbm46 knockout mice, the RBM46-target cohesin subunits displayed unaltered mRNA levels but had reduced translation, resulting in the failed assembly of axial elements, synapsis disruption, and meiotic arrest. Our study thus provides mechanistic insights into the molecular functions of RBM46 in gametogenesis and illustrates the power of LACE-seq for investigations of RNA-binding protein functions when working with low-abundance input materials.
Animals ; Mice ; 3' Untranslated Regions/genetics* ; Cell Cycle Proteins/metabolism* ; Gametogenesis/genetics* ; Meiosis/genetics* ; Nuclear Proteins/genetics* ; RNA-Binding Proteins/genetics*

Purpose: This study was performed to analyze the rule of confluence of the caudate lobe bile duct (CLD) into the left hepatic duct (LHD) and to discuss the protective strategy during left hemihepatectomy. Methods: MRI of 400 patients and T-tube angiography images of 100 patients were collected, and the imaging rules of the confluence of the CLD into the LHD were summarized. The clinical data of 33 patients who underwent left hemihepatectomy using the protective strategy were analyzed. Results: MRI and T-tube angiography images showed that the length from the confluence point of the CLD into the LHD to the confluence of the left and right hepatic ducts was 1.19 ± 0.40 cm and 1.26 ± 0.39 cm, respectively. The average angle between the longitudinal axis of the 2 bile ducts was 68.27° ± 22.59° and 66.58 ± 22.88°, respectively. Coronal and cross-sectional images showed that inflow from the foot side to the cranial side was noted in 79.8% and 82.0% of patients, respectively, and inflow from the dorsal to the ventral side was observed in 84.5% and 88.0%, respectively. Based on these imaging rules, the safe transection length and plane were summarized, and the CLD was effectively protected in 33 cases of left hemihepatectomy. Conclusion In left hemihepatectomy, the LHD should be transected at least 1.5 cm away from the confluence of the left and right hepatic ducts, and the plane of transection should be oblique to the dorsal side at an angle of 45° with the LHD, these parameters represent an effective strategy to protect the CLD.

Background and Objectives: The influence of pre-intervention coronary physiologic status on outcomes post percutaneous coronary intervention (PCI) is not well known. We sought to investigate the prognostic implications of pre-PCI fractional flow reserve (FFR) combined with post-PCI FFR. Methods: A total of 1,479 PCI patients with pre-and post-PCI FFR data were analyzed. The patients were classified according to the median values of pre-PCI FFR (0.71) and post-PCI FFR (0.88). The primary outcome was target vessel failure (TVF) at 2 years. Results: The risk of TVF was higher in the low pre-PCI FFR group than in the high pre-PCI FFR group (hazard ratio, 1.82; 95% confidence interval, 1.15–2.87; p=0.011). In 4 group comparisons, the cumulative incidences of TVF at 2 years were 3.8%, 4.1%, 4.8%, and 10.2% in the high pre-/high post-, low pre-/high post-, high pre-/low post-, and low pre-/low post-PCI FFR groups, respectively. The risk of TVF was the highest in the low pre-/low post-PCI FFR group among the groups (p values for comparisons <0.05). In addition, the high pre-/low post-PCI FFR group presented a comparable risk of TVF with the high post-PCI FFR groups (p values for comparison >0.05). When the prognostic value of the post-PCI FFR was evaluated according to the pre-PCI FFR, the risk of TVF significantly decreased with an increase in postPCI FFR in the low pre-PCI FFR group, but not in the high pre-PCI FFR group. Conclusions Pre-PCI FFR was associated with clinical outcomes after PCI, and the prognostic value of post-PCI FFR differed according to the pre-PCI FFR.

Objective:To investigate the clinical effect of applying the digital six-axis external fixation frame based on CT data in the treatment of tibiofibular fractures.Methods:The clinical data of 43 patients with tibiofibular fractures treated by the self-developed digital six-axis external fixation frame based on CT data at Integrated Orthopedic Department of Traditional Chinese Medicine (TCM) and Western Medicine,HongHui Hospital from January 2018 to January 2021 were retrospective analysis.There were 27 males and 16 females,aged (36.0±9.4) years(range:25 to 50 years).AO classification:15 cases of 42A,11 cases of 42B, and 17 cases of 42C.There were 7 open fractures and Gustilo fracture classification:2 cases of type Ⅰ,4 cases of type Ⅱ,and 1 case of type Ⅲ.The two or three plane rings were connected with six connecting rods to form a complete six-axis external fixation frame,and the distal and proximal fracture blocks were connected to the distal and proximal rings by fixation pins,and the lengths of the six connecting rods needed to be adjusted were calculated by using the supporting software according to the CT data after surgery,and then the lengths of the connecting rods were adjusted one by one to complete the reduction of the fracture. The reduction accuracy of this six-axis external fixation brace was evaluated by measuring postoperative radiographs; postoperative recovery and complications were collected,the time of brace removal was recorded,and the function of the affected limb was evaluated according to the Johner-Wruhs score at the final follow-up.Results:Postoperative radiographs showed that all patients achieved satisfactory reduction with lateral displacement( M(IQR)) of 2.3(2.5) mm (range:0.3 to 7.3 mm),anteroposterior displacement of 2.1 (2.4) mm (range:0.3 to 5.7 mm),anteroposterior angulation of 2.5(2.4)°(range:0 to 5°),internal and external angulation of 2.1(1.5)°(range:0 to 4°), and no significant internal or external rotational deformity was detected on the exterior.On the second postoperative day,all patients were able to walk with partial weight-bearing on crutches. All 43 patients were followed up for more than 6 months,with a follow-up period of (33.3±7.3) weeks (range:24 to 42 weeks).The external fixation frame was removed after the fracture healed.The external frame was removed at 20(3)weeks (range:18 to 25 weeks) postoperatively. Up to the final follow up, no secondary fracture occurred in any of them.The Johner-Wruhs score of the affected limb at the last follow-up was excellent in 39 cases and good in 4 cases. Conclusion:The digital six-axis external fixator based on CT data for tibiofibular fractures has the advantages of precise reduction,firm fixation,simple operation,rapid fracture healing,and minimal trauma, which is a minimally invasive method for treating tibiofibular fractures,especially suitable for patients with poor skin and soft tissue conditions such as open injuries.

Objective:To investigate the clinical effect of applying the digital six-axis external fixation frame based on CT data in the treatment of tibiofibular fractures.Methods:The clinical data of 43 patients with tibiofibular fractures treated by the self-developed digital six-axis external fixation frame based on CT data at Integrated Orthopedic Department of Traditional Chinese Medicine (TCM) and Western Medicine,HongHui Hospital from January 2018 to January 2021 were retrospective analysis.There were 27 males and 16 females,aged (36.0±9.4) years(range:25 to 50 years).AO classification:15 cases of 42A,11 cases of 42B, and 17 cases of 42C.There were 7 open fractures and Gustilo fracture classification:2 cases of type Ⅰ,4 cases of type Ⅱ,and 1 case of type Ⅲ.The two or three plane rings were connected with six connecting rods to form a complete six-axis external fixation frame,and the distal and proximal fracture blocks were connected to the distal and proximal rings by fixation pins,and the lengths of the six connecting rods needed to be adjusted were calculated by using the supporting software according to the CT data after surgery,and then the lengths of the connecting rods were adjusted one by one to complete the reduction of the fracture. The reduction accuracy of this six-axis external fixation brace was evaluated by measuring postoperative radiographs; postoperative recovery and complications were collected,the time of brace removal was recorded,and the function of the affected limb was evaluated according to the Johner-Wruhs score at the final follow-up.Results:Postoperative radiographs showed that all patients achieved satisfactory reduction with lateral displacement( M(IQR)) of 2.3(2.5) mm (range:0.3 to 7.3 mm),anteroposterior displacement of 2.1 (2.4) mm (range:0.3 to 5.7 mm),anteroposterior angulation of 2.5(2.4)°(range:0 to 5°),internal and external angulation of 2.1(1.5)°(range:0 to 4°), and no significant internal or external rotational deformity was detected on the exterior.On the second postoperative day,all patients were able to walk with partial weight-bearing on crutches. All 43 patients were followed up for more than 6 months,with a follow-up period of (33.3±7.3) weeks (range:24 to 42 weeks).The external fixation frame was removed after the fracture healed.The external frame was removed at 20(3)weeks (range:18 to 25 weeks) postoperatively. Up to the final follow up, no secondary fracture occurred in any of them.The Johner-Wruhs score of the affected limb at the last follow-up was excellent in 39 cases and good in 4 cases. Conclusion:The digital six-axis external fixator based on CT data for tibiofibular fractures has the advantages of precise reduction,firm fixation,simple operation,rapid fracture healing,and minimal trauma, which is a minimally invasive method for treating tibiofibular fractures,especially suitable for patients with poor skin and soft tissue conditions such as open injuries.

OBJECTIVE：To ex plore the protective effects of Longbie capsule contained serum （called“LBJN”for short ）on the apoptosis of chondrocytes induced by YAP inhibitor verteporfin and its mechanism. METHODS ：Primary human knee osteoarthritis（OA）chondrocytes were extracted by two-step enzymatic digestion ，and then identif ied by toluidine blue staining and type Ⅱ collagen immunofluorescence staining. The effects of 2，5 μmol/L verteporfin alone or combined with 5％LBJN on cell apoptosis were detected by flow cytometry. Solvent control （0.1％ DMSO）and 5％ LBJN were set. Western blot assay was adopted to detect the expression of apoptosis related proteins （YAP，Bcl-2，cleaved-caspase-3） after treated with 0.1％DMSO（solvent control ），2 μmol/L verteporfin，2 μmol/L verteporfin+5％LBJN 和 0（blank control ），2.5％ LBJN and 5％ LBJN for 48 h. The expression of autophagy related proteins （mTOR，Beclin-1，LC3A/B） after treated with 0 （blank control ），2.5％，5％ LBJN for 48 h were det ected by Western blot assay. RESULTS ：The isolated cells accorded with the characteristics of chondrocytes. Compared with 0.1％DMSO， the apoptosis rates of cells were increased significantly after treated with 2，5 μmol/L verteporfin（P＜0.05），and the effects of the two concentrations were similar （P＞0.05）. Compared with verteporfin alone ，2，5 μmol/L verteporfin combined with 5％LBJN could significantly decrease the apoptotic rate of cells （P＜0.05）. Compared with 0.1％DMSO，the protein expression of YAP and Bcl-2 were decreased significantly after treated with 2 μ mol/L verteporfin （P＜0.05）， while the protein expression of cleaved-caspase-3 were increased significantly （P＜0.05）. Compared with 2 μmol/L verteporfin，protein expression of YAP and Bcl-2 were increased significantly after treated with 2 μmol/L verteporfin+5％LBJN（P＜0.05），while the protein expression of cleaved-caspase-3 were decreased significantly （P＜0.05）. Compared with blank control ，the protein expression of YAP ，Bcl-2 and Beclin-1 were increased significantly after treated with 2.5％，5％LBJN（P＜0.05），while protein expression of cleaved-caspase- 3 and mTOR were decreased significantly （P＜0.05）. CONCLUSIONS ：LBJN can block the apoptosis of chondrocytes induced by YAP inhibitor verteporfin ，and its mechanism may be related to regulating the expression of apoptosis related proteins and enhancing autophagy of chondrocytes.

Objective:To investigate the current situation of occupational hazards in automobile manufacturing enterprises in Shandong Province.Methods:From February to May 2019, the convenience sampling method was adopted to conduct on-site occupational health surveys with 20 automobile manufacturing enterprises in Shandong Province as the survey subjects, to detect the occupational hazard factors in the workplaces and individual exposure levels, and to analyze the occupational health check results of operators.Results:There were 13 small-sized, 4 medium-sized and 3 large-sized enterprises among the 20 automobile manufacturing enterprises. The detection results of benzene and toluene in the workplaces met the occupational exposure limits, and the detection results of welding fumes, manganese and its compounds, and xylene exceed the occupational exposure limits. The maximum short-term exposure concentration ( CSTE) of welding fume in the air of workplaces was 24.23 mg/m 3, and the over-standard rate was 11.0% (16/146) . The maximum time-weighted average concentration ( CTWA) of welding fume of operators is 10.60 mg/m 3, and the over-standard rate was 11.0% (8/73) . The maximum CSTE of manganese and its compounds in the air of workplaces was 0.879 mg/m 3, and the of manganese and its compounds of operators was 0.175 mg/m 3, and the over-standard rate was 5.7% (4/70) . The maximum xylene CSTE in the air of workplaces was 230.00 mg/m 3, and the over-standard rate was 3.9% (2/51) . The maximum xylene CTWA of operators was 70.40 mg/m 3, the over-standard rate was 3.6% (1/28) . Among the 4775 workers exposed to occupational hazards, 38 (0.80%) were suspected of electric welder's pneumoconiosis, 27 (0.57%) were suspected of manganese poisoning and 31 (0.65%) were suspected of chronic low-concentration benzene and benzene series poisoning. The detection rates of suspected occupational diseases among workers in small and medium-sized enterprises were relatively high, 2.86% (30/1048) and 4.51% (51/1132) respectively. There was a statistically significant difference in the detection rates of suspected occupational diseases among the operators of different scale automobile manufacturers ( P<0.05) . Conclusion:The exposure levels of electric welding fumes, manganese and its compounds in welding jobs and xylene exposure levels in spray painting jobsin Shandong Province's automobile manufacturing enterprises are more serious. The supervision and management of occupational hygiene should be strengthened, the working environment should be improved, and the health of welding and painting workers should be protected.