ObjectiveTo find out whether there is any difference in the monitoring results of mosq-ovitraps placed in different orientations in multi-storey residential areas, so as to provide a scientific basis for routine and emergency monitoring of Aedes albopictus with mosq-ovitraps in residential areas. MethodsFrom July 6th to October 26th 2023, one mosquito ovitrap was set up in each of the 4 orientations of east, south, west and north around the buildings in a multi-storey residential area in Jinhui Town, Fengxian District, Shanghai. Data was collected and recorded 72 hours after placement. The chi-square test was used to compare the mosquito ovitrap indices (MOIs) of two independent samples, and the Kruskal⁃Wallis H test was used to compare the MOIs of multiple independent samples. ResultsAfter 16 weeks of surveillance, 997 mosquito ovitraps were recovered, of which 211 were positive, with the mosquito ovitrap index (MOI) of 21.16% and the Aedes albopictus density index of 1.03 mosquitoes·ovitrap^-1. The MOIs were higher in September (24.22%) and October (23.96%), and the MOIs in the west, south and north within the two months were all above 20.00%. From July to October, the MOIs in the east, west, south and north were 20.70%, 22.20%, 25.50% and 16.20%, respectively, and the difference in MOIs among the 4 orientations was not statistically significant (χ²=6.647, P=0.084). Stratified analysis by month showed that in August, the south side of the multi-storey residential areas had the highest MOI (31.30%), the north side had the lowest MOI (1.30%), and there was a statistically significant difference in MOI in the east, west, south and north (χ²=25.986, P<0.001). In October, the MOI in the west was the highest (33.30%) and the MOI in the east was the lowest (6.30%), the difference in MOIs of the 4 orientations was statistically significant (χ²=12.007, P=0.007). The MOIs in the south side of the building in the outskirts of the residential area from the 1st week in July to the 4th week in October was lower (19.20%) than that in the south side of the inner building (31.70%), and the difference in MOI was statistically significant (χ²=5.118, P=0.024). ConclusionThe study of MOI in different orientations in a multi-storey residential area is a preliminary exploration based on field work, and the results show that there is a difference in MOIs in different orientations during the peak breeding period of mosquitoes. Further indicators such as temperature, humidity and wind speed in different orientations can be collected to explore the influencing factors of MOIs.

Animal experiments are an essential component of life sciences and medical research. However, the external validity and reliability of individual animal studies are frequently challenged by inherent limitations such as small sample sizes, high design heterogeneity, and poor reproducibility, which impede the effective translation of research findings into clinical practice. Systematic reviews and meta-analysis represent a key methodology for integrating existing evidence and enhancing the robustness of conclusions. Currently, however, the application of systematic reviews and meta-analysis in the field of animal experiments lacks standardized guidelines for their conduct and reporting, resulting in inconsistent quality and, to some extent, diminishing their evidence value. To address this issue, this paper aims to systematically delineate the reporting process for systematic reviews and meta-analysis of animal experiments and to propose a set of standardized recommendations that are both scientific and practical. The article's scope encompasses the entire process, from the preliminary preparatory phase [including formulating the population， intervention， comparison and outcome （PICO） question, assessing feasibility, and protocol pre-registration] to the key writing points for each section of the main report. In the core methods section, the paper elaborates on how to implement literature searches, establish eligibility criteria, perform data extraction, and assess the risk of bias, based on the Preferred Reporting Items for Systematic Reviews and Meta-analysis （PRISMA) statement, in conjunction with relevant guidelines and tools such as Animal Research： Reporting of in Vivo Experiments （ARRIVE) and a risk of bias assessment tool developed by the Systematic Review Centre for Laboratory Animal Experimentation (SYRCLE). For the presentation of results, strategies are proposed for clear and transparent display using flow diagrams and tables of characteristics. The discussion section places particular emphasis on how to scientifically interpret pooled effects, thoroughly analyze sources of heterogeneity, evaluate the impact of publication bias, and cautiously discuss the validity and limitations of extrapolating findings from animal studies to clinical settings. Furthermore, this paper recommends adopting the Grading of Recommendations Assessment, Development and Evaluation (GRADE) methodology to comprehensively grade the quality of evidence. Through a modular analysis of the entire reporting process, this paper aims to provide researchers in the field with a clear and practical guide, thereby promoting the standardized development of systematic reviews and meta-analysis of animal experiments and enhancing their application value in scientific decision-making and translational medicine.

To explore the role of the "Clinical Practice Guidelines" column and others in the Medical Joumnal of Peking Union Medical College Hospital (Med J PUMCH) in promoting diseiplinary development.

BACKGROUND:At present,the traditional powder sintering method is easy to introduce impurities in the process of preparing porous titanium,and the manufacturing of porous titanium still faces two major problems:impurity pollution and difficult control of the material forming process. OBJECTIVE:To prepare pure porous titanium with certain porosity,and analyze the microstructure evolution and properties of the porous titanium. METHODS:Porous titanium was prepared at a low energy density by selective laser melting technology.The parameter range of porous titanium with large porosity was obtained by measuring the porosity of the formed specimen,and the evolution of the microstructure and mechanical properties of the specimen in the range were analyzed. RESULTS AND CONCLUSION:(1)With the increase in energy density,the porosity of the porous titanium specimen decreased gradually.When the energy density was between 10.61 and 27.78 J/mm3,porous titanium with a porosity of 11.23%-33.67%could be formed.When the energy density was between 27.78-37.88 J/mm3,the forming parts were relatively dense.(2)The phase composition of porous titanium formed was mainly α titanium.With the increase in energy density,the porosity gradually decreased,and the pore morphology changed from irregularly connected pores to closed nearly spherical pores.The powder particles changed from a slightly sintered neck to a continuous fuse.The CT scan results revealed that there were a large number of connected pores in the forming specimen with a large specific surface area and the pore radius was roughly distributed between 2-6 μm at the energy density of 10.61 J/mm3.Simultaneously,porous titanium with compressive strength of 188-1 000 MPa could be obtained at the energy density of 10.61-27.78 J/mm3,which could meet the requirements of biomedical applications.(3)These results have confirmed that the selective laser melting technology can overcome the problems of impurity pollution and long manufacturing cycle caused by the traditional preparation process,and provide an effective solution for the preparation of porous titanium with excellent mechanical properties.

【Objective】 To investigate the reasonable serological detection method by analyzing the characteristics of anti-K and anti-Wr^a from a patient who received treatment with daratumumab. 【Methods】 Unexpected antibody screening and identification were performed by saline method, polybrene, cardioagglutinin, dithiothreitol (DTT) treatment, trypsin treatment and papain treatment in the patient's plasma and acid elution solution. Heat elution test was detected after absorbing patient serum with K antigen negative red blood cells. The characteristics of antibodies were analyzed and their titer was continuously detected. Cross matching was performed after excluding interference of daratumumab. 【Results】 Anti-K and anti-Wr^a were detected in saline and polybrene in the patient's plasma. The patient's elution solution contained daratumumab. DTT or trypsin treatment excluded interference of daratumumab but papain treatment did not. DTT treatment destroyed K antigen and missed the detection of IgG antibodies in the Kell system. Trypsin treatment did not affect K antigen and can detect IgG antibodies of Kell system(anti-k)in the serum of the patient treated with daratumumab. Anti K was IgM and the titer was 4 by saline method and it decreased to no agglutination in room temperature after 39 days. Anti-Wr^a was IgG and the titer by polybrene method was 4, and it decreased to 1 after 39 days. After 76 days, neither anti-K nor anti-Wr^a could be detected. Transfusions of K and Wr^a antigen negative red blood cells were safe and effective. 【Conclusion】 DTT treatment can exclude interference of daratumumab, but attention should be paid to missed detection of anti-K. To avoid interference of daratumumab and identify unexpected antibody, multiple methods such as DTT treatment, polybrene and trypsin treatment in combination are recommended.

Integrating evidence from animal experiments is a critical component of biomedical research, providing essential prior information for in-depth investigations of disease mechanisms and new drug development. Animal models have played an irreplaceable role in simulating human diseases. However, the integration of evidence from animal experiments has faced numerous challenges, including insufficient emphasis, significant heterogeneity in study designs, high publication bias, and discrepancies with clinical research practices. This paper first identifies existing issues in the original research evidence from animal experiments, such as the selection and applicability of animal models, considerations in the design of experimental studies, and factors influencing the translation of animal experimental evidence. It then discusses various methods for integrating this evidence, including systematic review and meta-analysis, overview of systematic review/umbrella review, scoping review, and evidence mapping, while highlighting recent advancements in their application. Finally, the paper addresses the main challenges currently encountered in the integration of evidence from animal experiments and proposes targeted improvement strategies aimed at enhancing the efficiency of translating research outcomes into clinical practice and promoting the advancement of evidence-based medicine. By continuously optimizing original experimental research protocols and evidence integration practices, this work aims to establish a more efficient and scientific environment for the synthesis of evidence from animal experiments, ultimately contributing to clinical trials and human health.

Objective To assess the efficacy and safety of ascending aorta banding technique combined with typeⅠhybrid aortic arch repair for the aortic arch diseases. Methods The clinical data of patients undergoing ascending aorta banding technique combined with type Ⅰ hybrid arch repair for aortic arch diseases from March 2019 to March 2022 in Beijing Anzhen Hospital were retrospectively analyzed. The technical success, perioperative complications and follow-up results were evaluated. Results A total of 44 patients were collected, including 35 males and 9 females, with a median age of 63.0 (57.5, 64.6) years. The average EuroSCORE Ⅱ score was 8.4%±0.7%. The technical success rate was 100.0%. All patients did not have retrograde type A aortic dissection and endoleaks. One patient died of multiple organ failure 5 days after operation, the in-hospital mortality rate was 2.3%, and the remaining 43 patients survived and were discharged from hospital. The median follow-up period was 14.5 (6-42) months with a follow-up rate of 100.0%. One patient with spinal cord injury died 2 years after hospital discharge. One patient underwent thoracic endovascular aortic repair at postoperative 3 months due to new entry tears near to the distal end of the stent. Conclusion Ascending aorta banding combined with typeⅠhybrid arch repair for the aortic arch diseases does not need cardio-pulmonary bypass. Ascending aorta banding technique strengthens the proximal anchoring area of the stent to avoid risks such as retrograde type A dissection, endoleak and migration. The operation owns small trauma, rapid recovery, low mortality and a low rate of reintervention, which may be considered as a safe and effective choice in the treatment of the elderly, high-risk patients with complex complications.

The aims of developing rapid and living guidelines is to keep the recommendations in the guideline up-to-date. Compared with the conventional guideline, the rapid and living guideline can make better use of the existing evidence and apply and transform the evidence in a timely manner. This paper introduces the advantages and usage of rapid and living guidelines, the development process and existing challenges, and offers some insights, in order to provide reference for domestic organizations and scholars engaged in guideline development.

With the development of the Scientific, Transparent and Applicable Rankings tool for clinical practice guidelines(STAR), the publication of evaluation and ranking for scientificity, transparency and applicability of Chinese guidelines and consensus published in the medical journals in 2021and 2022, as well as the publication of the STAR evaluation and ranking for some specialities, the STAR evaluation and ranking has received widespread attention in the medical community. In order to further enhance its scientificity and transparency, Methodology and Technology Specialization Committee of the STAR Working Group presents this article to introduce sample identification and speciality assignment in the evaluation and ranking process.

Objective:To investigate the association of urinary cadmium level with body mass index (BMI) and body circumferences among the older adults over 65 years old in 9 longevity areas of China.Methods:Subjects were older adults over 65 years old from the Healthy Aging and Biomarkers Cohort Study (HABCS) between 2017 and 2018 conducted in 9 longevity areas in China. A total of 1 968 older adults were included in this study. Information including socio-demographic characteristics, lifestyles, diet intake, and health status was collected by using questionnaires and physical examinations. Urine samples were collected to detect urinary cadmium and creatinine levels. Body circumferences included waist circumference, hip circumference and calf circumference. Subjects were divided into three groups (low:<0.77 μg/g·creatinine, middle:0.77-1.69 μg/g·creatinine, high:≥1.69 μg/g·creatinine) by tertiles of creatinine-adjusted urinary cadmium concentration. Multiple linear regression models were used to analyze the association of creatinine-adjusted urinary cadmium level with BMI and body circumferences. The dose-response relationship of creatinine-adjusted urinary cadmium concentration with BMI and body circumferences was analyzed by using restrictive cubic splines fitting multiple linear regression model.Results:The mean age of subjects was (83.34±11.14) years old. The median (Q1, Q3) concentration of creatinine-adjusted urinary cadmium was 1.13 (0.63, 2.09) μg/g·creatinine, and the BMI was (22.70±3.82) kg/m 2. The mean values of waist circumference, hip circumference, and calf circumference were (85.42±10.68) cm, (92.67±8.90) cm, and (31.08±4.76) cm, respectively. After controlling confounding factors, the results of the multiple linear regression model showed that for each increment of 1 μg/g·creatinine in creatinine-adjusted urinary cadmium, the change of BMI, waist circumference, hip circumference, and calf circumference in the high-level group was -0.28 (-0.37, -0.19) kg/m 2, -0.74 (-0.96, -0.52) cm, -0.78 (-0.96, -0.61) cm, and -0.20 (-0.30, -0.11) cm, respectively. The restrictive cubic splines curve showed a negative nonlinear association of creatinine-adjusted urinary cadmium with BMI ( Pnonlinear<0.001) and negative linear associations of creatinine-adjusted urinary cadmium with waist circumference ( Plinear<0.001), hip circumference ( Plinear<0.001), and calf circumference ( Plinear<0.001). Conclusion:Urinary cadmium level is significantly associated with decreased BMI, waist circumference, hip circumference and calf circumference among older adults over 65 years old in 9 longevity areas of China.