Objective To explore the clinical value of the platelet count(PLT)to high-density lipoprotein cholesterol(HDL-C)ratio(PHR)in predicting poor prognosis after intravenous thrombolysis in patients with acute cerebral infarction(ACI).Methods A total of 304 patients with ACI who received intravenous thrombolytic therapy in this hospital from January 2021 to December 2023 were selected as the research sub-jects.According to the modified Rankin scale score at 6-month follow-up,the 304 patients with ACI were di-vided into the good prognosis group(n=216)and the poor prognosis group(n=88).Clinical data of all pa-tients were collected.The levels of PLT,HDL-C and PHR were compared between the two groups.The pre-dictive value of PLT,HDL-C and PHR for the prognosis of ACI patients was analyzed by using the receiver operating characteristic(ROC)curve.Binary Logistic stepwise regression analysis was used to explore the in-fluencing factors of prognosis in ACI patients.Results Compared with the good prognosis group,the HDL-C level in the poor prognosis group decreased,while the PLT level and PHR increased(P＜0.05).The results of the ROC curve showed that the area under the curve(AUC)and 95％CI of PLT,HDL-C,and PHR for pre-dicting poor prognosis after intravenous thrombolysis in ACI patients was 0.829(0.784-0.874),0.743(0.693-0.788),and 0.918(0.873-0.968),respectively.The AUC of PHR in predicting poor prognosis af-ter intravenous thrombolysis in ACI patients was higher than that of PLT and HDL-C alone(Z=13.239,10.776,P＜0.001).The proportions of National Institutes of Health Stroke Scale(NIHSS)score ≥8 points at admission,transformation of previous symptomatic hemorrhage,combined hypertension,and combined dia-betes in the poor prognosis group were all higher than those in the good prognosis group(P＜0.05).The re-sults of binary Logistic stepwise regression showed that the NIHSS score at admission(OR=2.565,95％CI:1.292-5.094),the transformation of previous symptomatic hemorrhage(OR=2.073,95％CI:1.179-8.645),and PHR(OR=3.732,95％CI:2.037-6.839)were risk factors for poor prognosis in ACI patients(P＜0.05).Conclusion PHR is expected to become an important reference index for predicting the prognosis of ACI patients after intravenous thrombolysis therapy.PHR,NIHSS score at admission,and the transforma-tion of previous symptomatic hemorrhage are all influencing factors for the prognosis of ACI patients after in-travenous thrombolysis therapy.

OBJECTIVE: To compare the effects of double-channel core decompression (CD) combined with medullary cavity irrigation with those of simple CD on progression of collapse and clinical outcomes in non-traumatic osteonecrosis of the femoral head (ONFH). METHODS: A retrospective analysis was conducted on the clinical data of 19 patients (30 hips) with non-traumatic ONFH who underwent double-channel CD combined with medullary cavity irrigation and admitted between January 2024 and October 2024 (CD+irrigation group). According to a 1: 2 ratio, 54 patients (60 hips) who underwent simple CD and were matched in terms of age, gender, and body mass index (BMI) were included as the control (CD group). There was no significant difference in baseline data such as age, gender, BMI, affected side, ONFH type, preoperative Association Research Circulation Osseous (ARCO) stage, bone marrow edema stage, visual analogue scale (VAS) score for pain, and Harris score between the two groups ( P>0.05). The postoperative discharge time and occurrence of complications were recorded for both groups. The VAS scores before operation and at discharge after operation were compared, and the differences between pre- and post-operation (change values) were calculated for intergroup comparison. The Harris scores before operation and at discharge and 3 months after operation were also compared. During follow-up, X-ray film, CT, and MRI were performed for reexamination. The ARCO stage and bone marrow edema stage were evaluated at 3 months after operation and compared with those before operation to determine whether there was radiological progression or relief. RESULTS: All incisions in both groups healed by first intention after operation, with no infection, femoral neck fracture, or other operation-related complications. All patients were followed up, and the follow-up time of the CD+irrigation group was (146.8±27.7) days, and that of the CD group was (164.3±48.2) days; there was no significant difference between the two groups ( t=1.840, P=0.069). There was no significant difference in the length of hospital stay between the two groups ( P>0.05). At discharge after operation, the VAS score of the CD+irrigation group was significantly lower than that of the CD group ( P<0.05), and the change value was significantly higher than that of the CD group ( P<0.05). The Harris scores at discharge and 3 months after operation in the CD+irrigation group were significantly higher than those in the CD group ( P<0.05). The Harris score gradually increased with time, and the differences between different time points were significant ( P<0.05). Radiological reexamination showed that there was no significant difference in the ARCO stage and the incidence of radiological progression between the two groups at 3 months after operation ( P>0.05); however, the bone marrow edema stage and the degree of bone marrow edema relief in the CD+irrigation group were better than those in the CD group, with significant differences ( P<0.05). CONCLUSION Double-channel CD combined with medullary cavity irrigation can significantly alleviate hip joint pain and improve joint function in patients with non-traumatic ONFH, reduce the degree of bone marrow edema in the femoral head, and delay the progression of ONFH.
Humans ; Femur Head Necrosis/therapy* ; Retrospective Studies ; Male ; Female ; Decompression, Surgical/methods* ; Therapeutic Irrigation/methods* ; Adult ; Treatment Outcome ; Middle Aged ; Femur Head/surgery*

Stroke is a global disease that seriously threatens human life. The pathological mechanisms of ischemic stroke include neuroinflammation, oxidative stress, and the destruction of blood vessels at the lesion site. Here, a biocompatible in situ hydrogel platform was designed to target multiple pathogenic mechanisms post-stroke, including anti-inflammation, anti-oxidant, and promotion of angiogenesis. Double-crosslinked responsive multifunctional hydrogels could quickly respond to the pathological microenvironment of the ischemic damage site and mediate the delivery of nitric oxide (NO) and ISO-1 (inhibitor of macrophage migration inhibitory factor, MIF). The hydrogel demonstrated good biocompatibility and could scavenge reactive oxygen species (ROS) and inflammatory cytokines, such as interleukin-6 (IL-6), interleukin-10 (IL-10), and MIF. In a mouse stroke model, hydrogels, when situated within the microenvironment of cerebral infarction characterized by weak acidity and elevated ROS release, would release anti-inflammatory nanoparticles rapidly that exert an anti-inflammatory effect. Concurrently, NO was sustained release to facilitate angiogenesis and provide neuroprotective effects. Neurological function was significantly improved in treated mice as assessed by the modified neurological severity score, rotarod test, and open field test. These findings indicate that the designed hydrogel held promise for sustained delivery of NO and ISO-1 to alleviate cerebral ischemic injury by responding to the brain's pathological microenvironment.

Objective To compare and analyze the germicidal efficacy of continuous ultraviolet and pulsed ultravio-let(UV)lasers on pathogenic microorganisms.Methods Spore slides of Escherichia coli and Bacillus atrophaeus were irradiated using a 254 nm ultraviolet mercury lamp and UV laser.The carrier quantitative germicidal test was conducted to determine the disinfection efficacy at different irradiation doses.Results When the irradiation dose of the ultraviolet mercury lamp was 245.52 mJ/cm2,the logarithmic killing values of Escherichia coli and Bacillus atro-phaeus spores were 5.00 and 2.92,respectively,and the mean logarithmic killing doses were 49.10 and 84.08 mJ/cm2,respectively;When the UV laser irradiation doses were 208.39 and 206.80 mJ/cm2,the logarithmic killing values for the two microorganisms were 6.29 and 3.32,respectively,and the mean logarithmic killing doses were 33.13 and 62.29 mJ/cm2,respectively.Conclusion Compared with continuous UV radiation,pulsed UV laser has stron-ger penetration ability,better killing efficacy on pathogenic microorganisms at the same radiation dose,and can con-duct targeted disinfection and sterilization on the surface of objects directionally.

Objective To conduct a comparative study on the biomechanical performance of using sutures for repairing inferior pole patellar fractures.Methods Compared to the normal patellar structure(Group A),four repair methods,namely,'Krackow'suture(Group B),"Kessler"fixation(Group C),'8-figure'mesh method(Group D),and modified suture bridge(Group E)were adopted.The static stiffness and dynamic stability of inferior pole patellar fractures fixed by each repair method were measured at 30°,60°,and 90° knee flexion.Results The stiffness at all flexion angles in Group E was closer to that in Group A,compared to other repair groups,followed by Group B,then Group D,and finally Group C.After the first cycle,at 30° knee flexion,Group C showed the greatest displacement,while Groups B and E had slightly larger displacements than the Group A,and the displacement of Group D was smaller than that of Group A.At 60° and 90° knee flexion,the displacement in all repair groups was smaller than that of Group A.After 200 cycles in the subsequent three cycles,displacement changes in all repair groups were smaller than those in Group A.Conclusions All repair methods were effective.In terms of biomechanical fixation performance,the modified suture bridge was superior to the'Krackow'suture and'8-figure'mesh,with Kessler fixation being the least effective.However,factors such as the injury severity,incision location,and surgical time should be comprehensively considered in actual clinical use,and it is recommended that the repair method should be selected in the following order:E,B,D,and C.

Objective To conduct a comparative study on the biomechanical performance of using sutures for repairing inferior pole patellar fractures.Methods Compared to the normal patellar structure(Group A),four repair methods,namely,'Krackow'suture(Group B),"Kessler"fixation(Group C),'8-figure'mesh method(Group D),and modified suture bridge(Group E)were adopted.The static stiffness and dynamic stability of inferior pole patellar fractures fixed by each repair method were measured at 30°,60°,and 90° knee flexion.Results The stiffness at all flexion angles in Group E was closer to that in Group A,compared to other repair groups,followed by Group B,then Group D,and finally Group C.After the first cycle,at 30° knee flexion,Group C showed the greatest displacement,while Groups B and E had slightly larger displacements than the Group A,and the displacement of Group D was smaller than that of Group A.At 60° and 90° knee flexion,the displacement in all repair groups was smaller than that of Group A.After 200 cycles in the subsequent three cycles,displacement changes in all repair groups were smaller than those in Group A.Conclusions All repair methods were effective.In terms of biomechanical fixation performance,the modified suture bridge was superior to the'Krackow'suture and'8-figure'mesh,with Kessler fixation being the least effective.However,factors such as the injury severity,incision location,and surgical time should be comprehensively considered in actual clinical use,and it is recommended that the repair method should be selected in the following order:E,B,D,and C.

Objective To compare and analyze the germicidal efficacy of continuous ultraviolet and pulsed ultravio-let(UV)lasers on pathogenic microorganisms.Methods Spore slides of Escherichia coli and Bacillus atrophaeus were irradiated using a 254 nm ultraviolet mercury lamp and UV laser.The carrier quantitative germicidal test was conducted to determine the disinfection efficacy at different irradiation doses.Results When the irradiation dose of the ultraviolet mercury lamp was 245.52 mJ/cm2,the logarithmic killing values of Escherichia coli and Bacillus atro-phaeus spores were 5.00 and 2.92,respectively,and the mean logarithmic killing doses were 49.10 and 84.08 mJ/cm2,respectively;When the UV laser irradiation doses were 208.39 and 206.80 mJ/cm2,the logarithmic killing values for the two microorganisms were 6.29 and 3.32,respectively,and the mean logarithmic killing doses were 33.13 and 62.29 mJ/cm2,respectively.Conclusion Compared with continuous UV radiation,pulsed UV laser has stron-ger penetration ability,better killing efficacy on pathogenic microorganisms at the same radiation dose,and can con-duct targeted disinfection and sterilization on the surface of objects directionally.

BACKGROUND:At present,the traditional powder sintering method is easy to introduce impurities in the process of preparing porous titanium,and the manufacturing of porous titanium still faces two major problems:impurity pollution and difficult control of the material forming process. OBJECTIVE:To prepare pure porous titanium with certain porosity,and analyze the microstructure evolution and properties of the porous titanium. METHODS:Porous titanium was prepared at a low energy density by selective laser melting technology.The parameter range of porous titanium with large porosity was obtained by measuring the porosity of the formed specimen,and the evolution of the microstructure and mechanical properties of the specimen in the range were analyzed. RESULTS AND CONCLUSION:(1)With the increase in energy density,the porosity of the porous titanium specimen decreased gradually.When the energy density was between 10.61 and 27.78 J/mm3,porous titanium with a porosity of 11.23%-33.67%could be formed.When the energy density was between 27.78-37.88 J/mm3,the forming parts were relatively dense.(2)The phase composition of porous titanium formed was mainly α titanium.With the increase in energy density,the porosity gradually decreased,and the pore morphology changed from irregularly connected pores to closed nearly spherical pores.The powder particles changed from a slightly sintered neck to a continuous fuse.The CT scan results revealed that there were a large number of connected pores in the forming specimen with a large specific surface area and the pore radius was roughly distributed between 2-6 μm at the energy density of 10.61 J/mm3.Simultaneously,porous titanium with compressive strength of 188-1 000 MPa could be obtained at the energy density of 10.61-27.78 J/mm3,which could meet the requirements of biomedical applications.(3)These results have confirmed that the selective laser melting technology can overcome the problems of impurity pollution and long manufacturing cycle caused by the traditional preparation process,and provide an effective solution for the preparation of porous titanium with excellent mechanical properties.

To systematically construct a guideline to provide a methodological guide for researchers to develop patient decision aids.

To systematically construct a guideline to provide a methodological guide for researchers to develop patient decision aids.