ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

OBJECTIVE To establish the fingerprint of Pinghuo tea standard decoction and a method for determination of multi-component to clarify the transfer relationship of quantities and quality from pieces and standard decoction. METHODS Fifteen batches of Pinghuo tea standard decoction were prepared and the extract rate was determined； the fingerprint of the preparation was established by using high-performance liquid chromatography（HPLC）； the similarity evaluation and the determination of common peaks were performed， and chemometric analysis was performed； the same method was used to determine the content of indicator components and the transfer rate was calculated. The chromatographic column was Venusil C18 column with mobile phase consisted of acetonitrile-0.1% phosphoric acid solution （gradient elution）； the column temperature was 30 ℃， and the detection wavelengths were 238 nm （0-37 min， 85-102 min） and 330 nm （37-85 min） at a flow rate of 1.0 mL/min with an injection volume of 10 μL. RESULTS The similarity of HPLC fingerprints for 15 batches of Pinghuo tea standard decoction was not lower than 0.968. A total of 24 common peaks were calibrated and 9 peaks were recognized， which were as follows neochlorogenic acid （peak 3）， chlorogenic acid （peak 6）， geniposide （peak 9）， glycyrrhizin （peak 10）， galuteolin （peak 11）， isochlorogenic acid A （peak 14）， luteolin （peak 21）， kaempferol （peak 23） and glycyrrhizic acid （peak 24）. Cluster analysis， principal component analysis and orthogonal partial least squares discriminant analysis showed consistent results， all of which could classify the 15 batches of samples into three categories. The linear range of indicator components in 15 batches of Pinghuo tea standard decoction， such as geniposide， luteolin， isochlorogenic acid A， glycyrrhizin， and glycyrrhizic acid， were 0.020 580-0.411 600， 0.001 617-0.080 850， 0.006 076-0.607 600， 0.005 125-0.071 740， and 0.017 288-0.432 200 mg/mL， respectively； RSDs of precision， repeatability， stability and recovery rate tests were all not higher than 4% （n＝6）. The mass fractions ranged 3.227 9-10.002 2， 0.297 4-0.554 6， 3.350 1-6.159 6， 0.720 6-1.073 3， 2.003 1-3.030 1 mg/g； transfer rates from the pieces and standard decoction were 19.762 8%-35.840 5%， 12.123 3%-21.254 0%， 46.097 2%-82.869 4%， 58.708 8%-91.629 6%， 39.114 3%-63.710 6%. The transfer rates of the extract from 15 batches of Pinghuo tea standard decoction ranged from 61.15%-84.68%. CONCLUSIONS Established HPLC fingerprint and content determination methods in this study are simple and accurate， which can provide reference for the quantitative value transfer study， quality control， clinical application and the development of subsequent formulations of Pinghuo tea standard decoction.

Objective The present study aimed to explore the effects of CC-chemokine receptor 5 antagonism on tumor growth and immune microenvironment.Methods Cell Counting Kit-8 was used to detect in vitro anti-proliferation activity of maraviroc,a selective CC-chemokine receptor 5 inhibitor,on Lewis cells,a mouse lung adenocarcinoma cell strain.Flow cytometry and real-time quantitative PCR were respectively used to detect cell apop-tosis and Caspase 8 gene expression.In a congenic mouse lung cancer model,the mice were intraperitoneally admin-istered with maraviroc or vehicle.Tumor sizes were measured and tumor infiltrating CD4+,CD8+ and Foxp3+ cells were determined by immunofluorescent staining.Results Our results showed that maraviroc could inhibit the growth of Lewis cancer cells not only in vitro but also in vivo.This in-vitro inhibition was presumably attributable to apoptosis induction by the enhancement of Caspase 8 gene expression after maraviroc blockade.Additionally,more CD4+ and CD8+ cells but less Foxp3+ cells were detected in tumor mass from the mice administered with maraviroc.Conclusions Taken together,it can be speculated that CCR5 blockade may inhibit the growth of Lewis cells by inducing cell apoptosis and impairing the immunosuppressive tumor microenvironment.It is worthy of further investi-gation as a candidate for cancer therapy.

Objective To investigate the predictive value of systemic immune inflammation index(SII)scores in long-term survival of patients with stage Ⅲ squamous lung cancer treated with radical radiotherapy.Methods Clinical data of stage Ⅲ squamous lung cancer patients who underwent radical radiotherapy at the Radiotherapy Department of the Fourth Hospital of Hebei Medical University from January 2010 to December 2018 were retrospectively analyzed.The peripheral hematological indexes one week before radiotherapy were collected and recorded.X-Tile software was applied to determine the best cut-off values for continuous variables.Kaplan-Meier method was used to analyze overall survival(OS)and progression-free survival(PFS).Results A total of 453 patients were included in this study.There were 336 patients in the low SII group(＜1 277.3),and other 117 patients were in the high SII group(≥1 277.3).The median OS and median PFS in the high SII group were shorter than those in the low SII group(OS:20.8 months vs.31.0 months,Log-rank χ2=18.015,P＜0.01;PFS:13.0 months vs.21.0 months,Log-rank χ2=15.062,P＜0.01).Multivariate Cox regression analysis showed that high SII was associated with OS(HR=1.628,95%CI:1.294-2.047,P<0.001)and PFS(HR=1.559,95%CI:1.240-1.961,P<0.001).Other influencing factors included late TNM stage,poor radiotherapy efficacy and decreased HALP score.Conclusion SII can be used to evaluate the long-term survival of patients with stage Ⅲ lung squamous cell carcinoma receiving radical radiotherapy,and the increase of SII indicates a poor prognosis.

AIM:To investigate the impact of aquaporin 4(AQP4)expression inhibition on autophagy and apoptosis in a mouse model of cerebral ischemia-reperfusion(I/R)injury,and to elucidate its underlying mechanism.METHODS:Cerebral I/R injury was induced in mice via transient middle cerebral artery occlusion(tMCAO).Totally 60 mice were randomly divided into sham group,I/R group,AQP4 inhibition group,and 3-methyladenine(3-MA)group,with 15 mice in each group.Among them,the mice in sham and I/R groups received intraperitoneal injections of normal saline,while those in AQP4 inhibition group and 3-MA group received intraperitoneal injections of AER-271(2 mg·kg-1·d-1)and AER-271+3-MA(2 mg·kg-1·d-1)for 3 d,respectively,once per day.Longa score was adopted to assess the neu-rological function,and to record changes in body weight.Cerebral infarction volume and histopathological alterations were evaluated using hematoxylin-eosin staining.Western blot analysis was performed to determine the levels of AQP4,LC3-Ⅱ,P62 and cleaved caspase-3,while the LC3-Ⅱ,P62,cleaved caspase-3 and NeuN(neuronal marker)colocalization and expression assessment were conducted with immunofluorescence.RESULTS:The mice in I/R and AQP4 inhibition groups exhibited extensive cerebral infarction,cerebral edema,and elevated Longa scores.However,in comparision to I/R group,the mice in AQP4 inhibition group showed significantly reduced cerebral infarct volume,cerebral edema vol-ume,and Longa score(P<0.05).Additionally,in contrast to sham group,the mice in I/R group displayed increased ex-pression of AQP4,LC3-Ⅱ and cleaved caspase-3(P<0.01),accompanied by decreased body weight and P62 expression(P<0.05 or P<0.01).Furthermore,compared with I/R group,the mice in both AQP4 inhibition group and 3-MA group demonstrated a decrease in the expression levels of AQP4,LC3-Ⅱ and cleaved caspase-3(P<0.05 or P<0.01),along with increased body weight and P62 expression(P<0.05 or P<0.01).Nonetheless,no significant differences were ob-served between AQP4 inhibition group and 3-MA group regarding Longa score,cerebral infarct volume,body weight,and the expression of AQP4,LC3-Ⅱ,cleaved caspase-3 and P62.CONCLUSION:Inhibition of AQP4 expression signifi-cantly reduces cerebral infarction area and nerve injury severity in tMCAO mice.Moreover,AQP4 expression inhibition decelerates autophagy and apoptosis after cerebral infarction,with the additional autophagy inhibitor showing no notable impact on the protective effect of AQP4 inhibition.