ObjectiveTo observe the effect of Qishao capsules on renal injury in db/db mice with diabetic kidney disease （DKD），and explore its mechanism of protecting the kidney by inhibiting podocyte apoptosis. Methodsdb/m mice （7 mice） were used as the normal group，and db/db mice （35 mice） were randomly divided into a model group，a dapagliflozin group （0.001 g·kg^-1·d^-1），and low-，medium-，and high-dose groups of Qishao capsules （0.341 3，0.682 5，and 1.365 g·kg^-1·d^-1，respectively）. Drug intervention lasted for 8 consecutive weeks. After sampling，the serum renal function indicators ［creatinine（SCr），and urea nitrogen（BUN）］，fasting blood glucose （FBG），24 h urinary protein quantification （24 h-UTP）， and other indicators of the mice were measured. The pathological tissue morphology of the kidney was observed by periodic acid-silver methenamine （PASM） and Masson's trichrome （Masson） staining. Immunohistochemical detection of cysteine-dependent aspartate-specific protease （Caspase）-3 and B-cell lymphoma 2 （Bcl-2） was performed. Western blot was used to detect the protein expression of Caspase-8，Caspase-7，Caspase-3， and other molecules. Terminal deoxynucleotidyl transferase dUTP nick End labeling （TUNEL） staining was used to observe apoptosis in renal tissue. Immunofluorescence staining of Wilms tumor suppressor gene-1 （WT-1） was used to observe podocyte injury. Real-time polymerase chain reaction （Real-time PCR） was employed to detect Caspase-8 and Caspase-3 mRNA expression in the kidneys of experimental mice. Data analysis was conducted using statistical software GraphPad Prism 10. ResultsCompared with the normal group，the model group showed significantly increased 24 h-UTP，SCr，BUN，and FBG （P<0.01）. Additionally， PASM staining of renal tissue showed increased glycogen deposition，glomerular hypertrophy，and thickening of the basement membrane. Masson staining showed collagen fiber proliferation in renal tissue. Transmission electron microscopy showed thickening of the renal tissue basement membrane and fusion or loss of foot processes in the model group. The immunohistochemical results showed that Caspase-3 in the kidneys of the mice in the model group significantly increased （P<0.01），while the Bcl-2 protein expression level decreased significantly （P<0.01）. The number of TUNEL positive cells in renal tissue significantly increased （P<0.01）. The positive expression of WT-1 in podocytes was significantly reduced （P<0.01）. Western blot analysis showed significant upregulation of Caspase-8，Caspase-7，and Caspase-3 protein expression in renal tissue （P<0.01）. The mRNA expression levels of Caspase-8 and Caspase-3 in the kidneys increased significantly （P<0.01）. Compared with the model group，the Qishao capsules groups can significantly reduce the levels of 24 h-UTP，SCr，BUN，and FBG （P<0.01）. The pathological damage of renal tissue and podocyte injury were improved to some extent. Immunohistochemistry in the kidney showed a significant decrease in Caspase-3 （P<0.01） and a significant increase in Bcl-2 protein expression level （P<0.01）. Additionally， there were a significant decrease in the number of TUNEL positive cells in renal tissue （P<0.01），a significant increase in WT-1 positive expression in podocytes （P<0.01），marked downregulation of Caspase-8，Caspase-7，and Caspase-3 protein expression in renal tissue （P<0.05，P<0.01），and a significant decrease in Caspase-8 and Caspase-3 mRNA expression levels （P<0.01）. ConclusionQishao capsules can inhibit podocyte apoptosis by regulating the expression of Caspase-8，Caspase-7， and Caspase-3，thereby improving the diabetic renal injury in db/db mice.

Objective: To understand the epidemiological characteristics and disease burden of influenza like illness (ILI) among student populations, so as to provide data support for policy formulation and optimal allocation of health resources. Methods: From January 2024 to February 2025, a questionnaire survey was conducted among parents of kindergarten, primary school, junior and senior high school students in 9 districts of Shenzhen, including Longhua, Futian, Bao an, Longgang, Luohu, Nanshan, Guangming, Pingshan and Yantian. Parents were asked to complete the questionnaire based on whether their children had fever, cough, vomiting, diarrhea, rash and other common symptoms in 2024. A total of 3 537 parents were investigated, and 444 ILI cases were included as study subjects. The epidemiological burden, including incidence rate of influenza, visitation rate, years lived with disability (YLDs) and economic burden (including direct economic burden, indirect economic burden and intangible burden) were analyzed. Results: The incidence rate of influenza among students in Shenzhen in 2024 was 12.55%. The ILI incidence rates in kindergarten, primary school, junior and senior high school were 14.01%, 11.69% and 5.23%, respectively, with a statistically significant difference ( χ 2= 45.20, P <0.01). The ILI consultation rate among students was 85.36%, and the consultation rates in kindergarten (87.36%) and primary school students (84.62%) were higher than those in junior and senior high school students ( 56.52 %) ( χ 2=16.47, P <0.01). A total of 78.88% of cases did not receive etiological detection.The median total economic burden per ILI case was 2 354.62 yuan, including direct medical costs of 300.00 yuan, direct non medical costs of 212.50 yuan, indirect costs of 1 000.00 yuan, and intangible burden of 500.00 yuan. Conclusions Schools are high risk environment for influenza, and younger students are a high risk group for ILI. The disease burden caused by student ILI remains substantial.

BACKGROUND:The absence of blood vessels in tendon tissue makes tendon repair challenging.Therefore,improving tendon healing and raising the efficacy of stem cell and other therapeutic cell transplantation after tendon damage have become hotspots for research in both clinical and scientific contexts. OBJECTIVE:The stem cells and gelatin microcarrier scaffold were joined to form tissue engineered stem cells.Human umbilical cord mesenchymal stem cells cultured in gelatin microcarriers were used to investigate the therapeutic impact and mode of action on tendinopathy healing in rats in vitro and In vivo. METHODS:(1)In vitro cell experiments:After seeding human umbilical cord mesenchymal stem cells with three-dimensional gelatin microcarriers,the cell vitality and survival were assessed.Human umbilical cord mesenchymal stem cells conventionally cultured were cultured as controls.(2)In vivo experiment:Adult SD rats were randomly assigned to normal group,tendinopathy group,2D group(tendinopathy+conventional culture of human umbilical cord mesenchymal stem cells),and 3D group(tendinopathy+gelatin microcarrier three-dimensional culture of human umbilical cord mesenchymal stem cells),with 6 rats in each group.Four weeks after therapy,animal behavior tests and histopathologic morphology of the Achilles tendon was examined. RESULTS AND CONCLUSION:(1)In vitro cell experiments:the seeded human umbilical cord mesenchymal stem cells on gelatin microcarriers showed high viability and as time went on,the stem cell proliferation level grew.Compared with the control group,3D stem cell culture preserved cell viability.(2)In vivo experiment:Following a 4-week treatment,the 3D stem cell culture group showed a significant improvement in both functional recovery of the lower limbs and histopathological scores when compared to the tendinopathy group.The 2D stem cell culture group also showed improvement in tendinopathy injury,but its effect is not as much as the 3D stem cell culture group.(3)The outcomes demonstrate that human umbilical cord mesenchymal stem cells cultured with three-dimensional gelatin microcarrier can promote the repair and regeneration of tendon injury tissue,and the repair effect is better than that of conventional human umbilical cord mesenchymal stem cells.

[Objective] To validate and optimize the platelet transfusion refractoriness (PTR) prediction model for patients with hematological disorders established by our center. [Methods] The data of patients with hematological diseases who received platelet transfusions from December 2021 to December 2022 were used as the training set, and data from January 2023 to December 2023 as the validation set. The validation set data was used to validate the predictive model constructed on the training set. Relevant risk factors for PTR were collected through literature review and preliminary studies。 The patients were divided into effective and ineffective groups according to the corrected count increment (CCI) of platelet counts. Predictive factors were screened using univariate and multivariate logistic regression. The calibration of the model were assessed via calibration curves, while discrimination, accuracy, sensitivity, and specificity were evaluated using receiver operating characteristic (ROC) curves Clinical utility was further analyzed with decision curve analysis (DCA). [Results] The Hosmer-Lemeshow (H-L) goodness-of-fit test for the validation set yielded S: P=0.000, indicating that the original model needs optimization. Baseline comparisons and logistic regression identified the number of red blood cell units (RBCU) and platelet units (PLT-U) transfused as key predictors for the optimized model. The H-L goodness-of-fit test S: P values for the training and validation sets were 0.930 and 0.056, respectively; the ROC areas were 0.793 5 and 0.809 4, specificities 90.95% and 84.21%, sensitivities 59.26% and 70.04%, and accuracies 78.14% and 74.10%, respectively. DCA demonstrated clinical net benefit within a prediction probability threshold range of 0.2-0.8. [Conclusion] Transfusion volumes of RBC-U and PLT-U were inversely associated with PTR in hematological patients. The resulting PTR prediction model exhibits moderate predictive efficacy and clinical benefit.

BACKGROUND: The optimal antidepressant dosages remain controversial. This study aimed to analyze the efficacy of antidepressants and characterize their dose-response relationships in the treatments of major depressive disorders (MDD). METHODS: We searched multiple databases, including the Embase, Cochrane Central Register of Controlled Trials, PubMed, and Web of Science, for the studies that were conducted between January 8, 2016, and April 30, 2023. The studies are double-blinded, randomized controlled trials (RCTs) involving the adults (≥18 years) with MDD. The primary outcomes were efficacy of antidepressant and the dose-response relationships. A frequentist network meta-analysis was conducted, treating participants with various dosages of the same antidepressant as a single therapy. We also implemented the model-based meta-analysis (MBMA) using a Bayesian method to explore the dose-response relationships. RESULTS: The network meta-analysis comprised 135,180 participants from 602 studies. All the antidepressants were more effective than the placebo; toludesvenlafaxine had the highest odds ratio (OR) of 4.52 (95% confidence interval [CI]: 2.65-7.72), and reboxetine had the lowest OR of 1.34 (95%CI: 1.14-1.57). Moreover, amitriptyline, clomipramine, and reboxetine showed a linear increase in effect size from low to high doses. The effect size of toludesvenlafaxine increased significantly up to 80 mg/day and subsequently maintained the maximal dose up to 160 mg/day while the predictive curves of nefazodone were fairly flat in different dosages. CONCLUSIONS: Although most antidepressants were more efficacious than placebo in treating MDD, no consistent dose-response relationship between any antidepressants was observed. For most antidepressants, the maximum efficacy was achieved at lower or middle prescribed doses, rather than at the upper limit. REGISTRATION No. CRD42023427480; https://www.crd.york.ac.uk/prospero/display_record.php?
Humans ; Antidepressive Agents/therapeutic use* ; Depressive Disorder, Major/drug therapy* ; Dose-Response Relationship, Drug ; Randomized Controlled Trials as Topic

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.