This study aimed to systematically construct a transitional curriculum for newly recruited surgical residents and to evaluate its preliminary application outcomes through pre and postimplementation assessments, so as to provide practical references for the design and dissemination of such curricula.

OBJECTIVE To investigate the management status of small pressure steam sterilizers in dental institu-tions across seven major regions of China and provide references for establishing standardized monitoring and eval-uation protocols for sterilization efficacy.METHODS From Aug.to Nov.2023,a convenience sampling method was employed to select 885 dental institutions of various levels from seven geographical regions.An online survey using a self-designed questionnaire was conducted to assess the management status of small pressure steam steri-lizers in dental institutions.RESULTS A total of 885 questionnaires were distributed,with 770 valid responses col-lected,covering 770 dental institutions at all levels.The survey involved 2 056 small pressure steam sterilizers,of which 43.14％were pre-vacuum type and 89.40％were benchtop models.Tertiary dental institutions had the high-est proportion of imported small pressure steam sterilizers(60.15％),with most devices in use for 5-10 years(36.88％).Secondary and low er-level institutions predominantly used domestically produced small pressure steam sterilizers(74.60％),which used for 3-5 years accounting for the highest proportion(34.29％).While 85.58％of dental institutions employed dedicated sterilization personnel,only 45.84％performed proper maintenance for small pressure steam sterilizers.Training rates were 80.00％for department of stomatology in ungraded general hospitals and primary medical institutions,76.19％in prejob and 71.43％during the work for department of sto-matology in primary clinics,respectively.CONCLUSIONS Although most dental institutions demonstrate sound policy formulation,challenges persist in equipment maintenance,policy implementation and grassroots training.Future efforts should be made on strengthening maintenance and inspection of equipment,enhancing sys-tem supervisory mechanisms,and optimizing training systems to ensure dental treatment safety.

OBJECTIVE To investigate the management status of small pressure steam sterilizers in dental institu-tions across seven major regions of China and provide references for establishing standardized monitoring and eval-uation protocols for sterilization efficacy.METHODS From Aug.to Nov.2023,a convenience sampling method was employed to select 885 dental institutions of various levels from seven geographical regions.An online survey using a self-designed questionnaire was conducted to assess the management status of small pressure steam steri-lizers in dental institutions.RESULTS A total of 885 questionnaires were distributed,with 770 valid responses col-lected,covering 770 dental institutions at all levels.The survey involved 2 056 small pressure steam sterilizers,of which 43.14％were pre-vacuum type and 89.40％were benchtop models.Tertiary dental institutions had the high-est proportion of imported small pressure steam sterilizers(60.15％),with most devices in use for 5-10 years(36.88％).Secondary and low er-level institutions predominantly used domestically produced small pressure steam sterilizers(74.60％),which used for 3-5 years accounting for the highest proportion(34.29％).While 85.58％of dental institutions employed dedicated sterilization personnel,only 45.84％performed proper maintenance for small pressure steam sterilizers.Training rates were 80.00％for department of stomatology in ungraded general hospitals and primary medical institutions,76.19％in prejob and 71.43％during the work for department of sto-matology in primary clinics,respectively.CONCLUSIONS Although most dental institutions demonstrate sound policy formulation,challenges persist in equipment maintenance,policy implementation and grassroots training.Future efforts should be made on strengthening maintenance and inspection of equipment,enhancing sys-tem supervisory mechanisms,and optimizing training systems to ensure dental treatment safety.

To improve patient-centered pharmaceutical management and pharmaceutical service capabilities in the pharmaceutical department of medical institutions,automation and information technology are indispensable.The Pharmacy Administration-Automation and Information Technology is one of the social organization standards of the Chinese Hospital Association as part 4-4 of Pharmaceutical Administration and Pharmaceutical Practice in Healthcare,which standardizes 32 key elements in four aspects:basic requirements for automation construction in medical institutions,construction of automation hardware equipment,construction of intelligent information platform,and quality management and continuous improvement.It can be used to guide medical institutions at all levels to select and optimize pharmacy automation equipment and information platforms.This article introduced the construction methods and contents of the pharmacy automation and information technology standards,to deepen the understanding of peers on this standard and promote its implementation.This article aimed to promote the modernization,informatization,and intelligence of pharmaceutical services in medical institutions,and improve the quality and efficiency of overall medical pharmaceutical administration and service.

Objective:To summarize the research on oral health education for pregnant women.Methods:The literature was described and analyzed using a scoping review method. Seven databases, such as PubMed, Embase, Web of Science, China National Knowledge Infrastructure, and WanFang Data, were electronically searched, and the search period was from database establishment to October 30, 2023.Results:A total of 43 articles were included. The implementers of health education were mainly dental professionals and prenatal healthcare personnel. The theoretical basis included the health belief model, planned behavior theory, social cognitive model and so on. The methods involved traditional teaching or lectures, family-centered, internet-based, and motivational interviews. The contents contained many aspects of oral health for pregnant women. The evaluation indicators mainly covered oral health knowledge, attitude and practice, and self-efficacy, oral health beliefs, oral health status, the incidence of oral diseases, adverse pregnancy outcomes of pregnant and postpartum women, and childhood caries incidence.Conclusions:We should establish a cooperation team of the Department of Stomatology and Obstetrics and Gynecology, incorporate oral health for pregnant women into prenatal care projects, fully utilize the platform of pregnant women's schools, explore the optimal theoretical basis for oral health education, and improve the content of oral health education for pregnant women.

OBJECTIVE: To isolate the phenolic amides from the dried bulbs of Allium chinense and investigate their myocardium protective activities. METHODS: The chemical constituents were isolated and purified by combining with silica gel column, Sephadex LH-20 column, HPLC and other chromatography techniques. Their structures were elucidated by NMR techniques and mass spectrometry. The isolated compounds were evaluated to determine their protective effect for myocardium cells in vitro. RESULTS: Two new phenolic amides, namely, alichinemide I ( 1) and alichinemide II ( 2), and six konwn amides were isolated from the dried bulbs of A. chinense. The structures of compounds 3- 8 were identified as 3-indolcarbaldehyde ( 3), 1-(2-aminophenyl)urea ( 4), 2,3,4,9-tetrahydro-1H-pyrido[3,4-b]indole-3-carboxylic acid ( 5), N-trans-feruloyltyramine ( 6), N-trans-p-coumaroyltyramine ( 7), and N-(3,4-dimethoxyphenethyl) acetamide ( 8). Compound 3 (50 μmol/L) showed significant inhibitory effect on the damage of H9c2 myocardial cells induced by H₂O₂in vitro. CONCLUSION Compounds 1 and 2 were new phenolic amides. Compound 3 could be one of the potential myocardium protective constituents of A. chinense.

To solve the problems of small one-time ablation range and easy charring of the tissue around the electrode associated with the tumor radiofrequency ablation needle, based on the multiphysical field coupling analysis software COMSOL, the effects of needle material, the number of sub needles and the bending angle of sub needles on the ablation effect of radiofrequency ablation electrode needle were studied. The results show that compared with titanium alloy and stainless steel, nickel titanium alloy has better radiofrequency energy transmission efficiency and it is the best material for electrode needle. The number of sub needles has a great influence on the average necrosis depth and the maximum necrosis diameter. Under the same conditions, the more the number of sub needles, the larger the volume of coagulation necrosis area. The bending angle of the needle has a great effect on the maximum diameter of the coagulated necrotic area, but has little effect on the average necrotic depth. Under the same other conditions, the coagulation necrosis area formed by ablation increased with the increase of the bending angle of the sub needle. For the three needles with bending angles of 60 °, 90 ° and 120 ° analyzed in this paper, the one with bending angle of 120 ° can obtain the largest coagulation necrosis area. In general, the design of nickel titanium alloy with 120 ° bending 8-pin is the optimal. The average depth of radiofrequency ablation necrosis area is 32.40 mm, and the maximum necrosis diameter is 52.65 mm. The above optimized design parameters can provide guidance for the structure and material design of tumor radiofrequency ablation needle.
Humans ; Needles ; Temperature ; Catheter Ablation/methods* ; Necrosis ; Neoplasms/surgery* ; Alloys

Objective:To investigate the clinical efficacy of Dog-Bone double button in the treatment of acute acromioclavicular dislocation under shoulder arthroscopy.Methods:A retrospective analysis was conducted of the 20 patients with acute acromioclavicular dislocation who had been treated at Department of Sports Medicine, Northern Jiangsu People's Hospital of Jiangsu Province from November 2018 to December 2020 by Dog-Bone double button under shoulder arthroscopy. They were 11 males and 9 females, aged from 31 to 63 years. Recorded were their visual analogue scale (VAS), Constant-Murley shoulder function score and range of shoulder anteflexion at preoperation and the last follow-up, as well as complications and the X-ray parameters at one month postoperation and the last follow-up [including coracoclavicular distance (CCD), distance between the upper and lower Dog-Bone titanium plates (DDD), angle between the coracoid process tunnel and the tangent line of the superior clavicle (CTCA), and widths of the clavicle tunnel and the coracoid process tunnel].Results:The 20 patients were followed up for 6 to 12 months (average, 10.5 months). Their preoperative VAS score, Constant score, and range of shoulder anteflexion were 3.0 (3.0, 4.0), 57.0 (54.3, 61.5) and 130° (110°, 140°), which were significantly improved to 0 (0, 0.8), 90.0 (86.5, 91.0) and 170° (170°, 180°) at the last follow-up ( P<0.05). Their CCD, DDD, CTCA, and widths of the clavicle tunnel and the coracoid process at one month postoperation were (5.0±1.0) mm, (32.4±3.5) mm, 91.7° (88.5°, 104.9°), 3.0 (3.0, 3.0) mm and 3.0 (3.0, 3.0) mm, which were significantly improved to (6.3±1.3) mm, (32.8±3.7) mm, 84.8° (81.8°, 92.0°), 3.5 (3.4, 3.6) mm and 3.2 (3.1, 3.3) mm with the exception of DDD at one month postoperation ( P<0.05). The last follow-up observed postoperative reduction loss in only one patient. Conclusion:For acute acromioclavicular joint dislocation, the Dog-Bone fixation technique under shoulder arthroscopy can lead to fine surgical efficacy and patient satisfaction, because it has advantages of limited trauma, good functional recovery of the shoulder, and effective prevention of reduction loss.

OBJECTIVE: To construct a three-dimensional (3D) finite element mechanical model of total hip arthroplasty for comparison of biomechanical differences of the hip joint following capsule repair and postoperative rehabilitation. METHODS: Six frozen specimens of hip joint posterior capsule ligament complex were collected in a bone-capsule-bone manner, and the load-strain curve and other mechanical properties of the specimens were tested using a universal material testing machine. Thin-section CT data of the pelvis and lower limbs obtained from a volunteer were imported into Mimics software to construct a 3D model of the hip joint. Digital models of the cup, femoral prosthesis and joint capsule were created in CATIA software and imported into Mimics to simulate total hip arthroplasty; the assembled data were imported into ABAQUS software. The properties of the capsule were set according to results of the mechanical test, anatomical studies, and constitutive equations, and the biomechanics of the anatomically repaired and conventionally repaired capsules were compared during hip flexion. RESULTS: The results of testing on the 6 capsule specimens showed a mean ultimate tensile strain of (39.21±5.23)% and a mean of ultimate tensile strength of 1.65±0.38 MPa. The stress-strain curve of the finite element model was consistent with the results of mechanical test on the specimens and the biochemical characteristics of the capsule. The stress was distributed evenly in the anatomically repaired capsule during hip flexion but not in the capsule repaired through the conventional approach; the tensile stress in the lower part of the conventionally repaired capsule reached the ultimate tensile stress measured on the capsule specimens at a 90° flexion. CONCLUSIONS The finite element model allows dynamic, quantitative and visual assessment of stress distribution in the hip joint capsule, and compared with the conventional approach, anatomical repair can achieve better biomechanical properties of the capsule.
Arthroplasty, Replacement, Hip ; Biomechanical Phenomena ; Finite Element Analysis ; Hip Joint/surgery* ; Humans ; Prognosis ; Stress, Mechanical

Obstructive sleep apnea(OSA) refers to apnea and hypopnea caused by repeated obstruction of upper respiratory tract collapse during sleep, accompanied by snoring and irregular snoring, daytime sleepiness and repeated arousal.Studies have shown that arousal is associated with daytime sleepiness and other symptoms and some complications in OSA patients.Based on literature review, this paper reviews the current research on OSA and arousal.