ObjectiveHeadspace solid-phase microextraction-gas chromatography-mass spectrometry（HS-SPME-GC-MS） and GC-triple quadrupole MS（GC-QqQ-MS） in combination with non-targeted and targeted metabolomics were employed to systematically analyze the chemical composition differences of Xihuangwan prepared with natural musk and artificial musk， and establish an identification system for them. MethodsThe volatile components of 9 batches of Xihuangwan samples from 8 manufacturers were analyzed by HS-SPME-GC-MS non-targeted metabolomics， and identified by comparing their MS data with the National Institute of Standards and Technology（NIST） spectral library. Orthogonal partial least squares-discriminant analysis（OPLS-DA） was used to identify differential volatile components of Xihuangwan prepared with natural musk and artificial musk. Additionally， GC-QqQ-MS targeted metabolomics was applied to quantify the levels of α-pinene， β-elemene， muscone， dehydroepiandrosterone， bornyl acetate， and octyl acetate in 27 batches of samples from 9 manufacturers. Cluster analysis， principal component analysis（PCA）， and partial least squares-discriminant analysis（PLS-DA） were conducted to further explore the differences in volatile components between Xihuangwan samples prepared with natural musk and artificial musk. ResultsNon-targeted metabolomics identified 291 volatile compounds in Xihuangwan， including alkanes， esters， alkanes， alcohols， ketones， naphthalenes and others. OPLS-DA analysis revealed distinct separation between Xihuangwan samples containing artificial musk（A1， C1， D1， E1， F1， G1， I1） and those containing natural musk（H1， H3）. A total of 30 differential metabolites were identified. The relative contents of these 30 differential metabolites were visualized using a radar chart， revealing significant differences in the levels of octanol， borneol acetate and muscone. Cluster analysis and PCA results from targeted metabolomics indicated that Xihuangwan could be classified into two distinct groups：one composed of natural musk（H1， H3） and the other of artificial musk， sample H2. PLS-DA identified muscone， octyl acetate， and dehydroepiandrosterone as key differential volatile components. Although no significant difference was observed in the content of octyl acetate between the two groups， statistically significant differences were found for muscone and dehydroepiandrosterone（P<0.05）. ConclusionMuscone and dehydroepiandrosterone can be used for the differentiation of Xihuangwan samples containing natural musk from those containing artificial musk. This study systematically and comprehensively analyzed the differences in the types and contents of major volatile components in Xihuangwan prepared with natural musk and artificial musk， providing a scientific basis for quality evaluation and control of Xihuangwan.

ObjectiveHeadspace solid-phase microextraction-gas chromatography-mass spectrometry（HS-SPME-GC-MS） and GC-triple quadrupole MS（GC-QqQ-MS） in combination with non-targeted and targeted metabolomics were employed to systematically analyze the chemical composition differences of Xihuangwan prepared with natural musk and artificial musk， and establish an identification system for them. MethodsThe volatile components of 9 batches of Xihuangwan samples from 8 manufacturers were analyzed by HS-SPME-GC-MS non-targeted metabolomics， and identified by comparing their MS data with the National Institute of Standards and Technology（NIST） spectral library. Orthogonal partial least squares-discriminant analysis（OPLS-DA） was used to identify differential volatile components of Xihuangwan prepared with natural musk and artificial musk. Additionally， GC-QqQ-MS targeted metabolomics was applied to quantify the levels of α-pinene， β-elemene， muscone， dehydroepiandrosterone， bornyl acetate， and octyl acetate in 27 batches of samples from 9 manufacturers. Cluster analysis， principal component analysis（PCA）， and partial least squares-discriminant analysis（PLS-DA） were conducted to further explore the differences in volatile components between Xihuangwan samples prepared with natural musk and artificial musk. ResultsNon-targeted metabolomics identified 291 volatile compounds in Xihuangwan， including alkanes， esters， alkanes， alcohols， ketones， naphthalenes and others. OPLS-DA analysis revealed distinct separation between Xihuangwan samples containing artificial musk（A1， C1， D1， E1， F1， G1， I1） and those containing natural musk（H1， H3）. A total of 30 differential metabolites were identified. The relative contents of these 30 differential metabolites were visualized using a radar chart， revealing significant differences in the levels of octanol， borneol acetate and muscone. Cluster analysis and PCA results from targeted metabolomics indicated that Xihuangwan could be classified into two distinct groups：one composed of natural musk（H1， H3） and the other of artificial musk， sample H2. PLS-DA identified muscone， octyl acetate， and dehydroepiandrosterone as key differential volatile components. Although no significant difference was observed in the content of octyl acetate between the two groups， statistically significant differences were found for muscone and dehydroepiandrosterone（P<0.05）. ConclusionMuscone and dehydroepiandrosterone can be used for the differentiation of Xihuangwan samples containing natural musk from those containing artificial musk. This study systematically and comprehensively analyzed the differences in the types and contents of major volatile components in Xihuangwan prepared with natural musk and artificial musk， providing a scientific basis for quality evaluation and control of Xihuangwan.

BACKGROUND:Curcumin is the main active ingredient of turmeric and has significant medicinal value in anti-tumor,anti-inflammatory,antioxidant and other aspects.However,its poor water solubility,unstable chemical properties and easy decomposition lead to difficulty in extracting curcumin and low extraction yield.Therefore,it is particularly important to optimize the curcumin extraction method.OBJECTIVE:To enhance the extraction yield and utilization value of curcumin and optimize the curcumin extraction process and curcumin nanoparticle preparation process.METHODS:Curcumin was extracted from turmeric by ethanol extraction,ultrasonic extraction,ionic liquid extraction,enzyme extraction,and ionic liquid combined with ultrasonic assisted enzyme extraction.The curcumin extraction yield was detected by high performance liquid chromatography;the best extraction method was determined,and subsequent process optimization experiments were carried out.The curcumin extraction yield was the response value with the type of ionic liquid,reaction temperature,ultrasonic time,liquid-to-solid ratio,ionic liquid concentration,and enzyme-drug mass ratio as parameters.The optimal production process of ionic liquid combined with ultrasonic assisted enzyme extraction was determined by single factor combined response surface experiment.The optimal process for preparing curcumin nanoparticles by ionic crosslinking method was determined by single factor combined response surface experiment with acetic acid concentration,chitosan to sodium tripolyphosphate mass ratio,stirring rate,curcumin mass concentration,sodium tripolyphosphate mass concentration,and chitosan mass concentration as parameters,and drug encapsulation efficiency as response value.Curcumin nanoparticles were prepared under the optimal process,and the particle size,polydispersity index,Zata potential value,drug loading,stability,hemolysis rate,and antioxidant capacity in vivo and in vitro of the nanoparticles were detected.RESULTS AND CONCLUSION:(1)Among the five extraction methods,the curcumin yield of ionic liquid combined with ultrasound-assisted enzyme extraction was the highest,and this method was selected as the curcumin extraction method for subsequent experiments.The results of single factor combined response surface experiment showed that the optimal process for curcumin extraction was:ionic liquid selected 1-hexyl-3-methylimidazolium chloride,reaction temperature 55 ℃,liquid-to-solid ratio 40 mL/g,ultrasound time 57 minutes,ionic liquid concentration 57％,enzyme-drug mass ratio 3.5:10,and the obtained turmeric extraction yield was 3.10％.The optimal preparation process of curcumin nanoparticles was:glacial acetic acid concentration 0.5％,chitosan and sodium tripolyphosphate mass ratio 5.0:1,stirring speed 150 r/min,curcumin mass concentration 2.23 mg/mL,sodium tripolyphosphate mass concentration 1.45 mg/mL,chitosan mass concentration 3.63 mg/mL,and the obtained drug encapsulation efficiency was 90.61％.(2)The drug loading of curcumin nanoparticles was(14.49±0.23)％,the average particle size was(76.95±1.65)nm,the polydispersity coefficient was 0.15±0.02,and the Zata potential value was(32.37±1.46)mV.The curcumin nanoparticles had good stability and blood compatibility,did not induce hemolysis,and had stronger antioxidant capacity in vivo and in vitro than free curcumin.(3)The results show that the process optimization not only solves the problems of low extraction yield,poor solubility,and low bioavailability of curcumin,but also enhances its antioxidant activity in vivo and in vitro.

BACKGROUND:Curcumin is the main active ingredient of turmeric and has significant medicinal value in anti-tumor,anti-inflammatory,antioxidant and other aspects.However,its poor water solubility,unstable chemical properties and easy decomposition lead to difficulty in extracting curcumin and low extraction yield.Therefore,it is particularly important to optimize the curcumin extraction method.OBJECTIVE:To enhance the extraction yield and utilization value of curcumin and optimize the curcumin extraction process and curcumin nanoparticle preparation process.METHODS:Curcumin was extracted from turmeric by ethanol extraction,ultrasonic extraction,ionic liquid extraction,enzyme extraction,and ionic liquid combined with ultrasonic assisted enzyme extraction.The curcumin extraction yield was detected by high performance liquid chromatography;the best extraction method was determined,and subsequent process optimization experiments were carried out.The curcumin extraction yield was the response value with the type of ionic liquid,reaction temperature,ultrasonic time,liquid-to-solid ratio,ionic liquid concentration,and enzyme-drug mass ratio as parameters.The optimal production process of ionic liquid combined with ultrasonic assisted enzyme extraction was determined by single factor combined response surface experiment.The optimal process for preparing curcumin nanoparticles by ionic crosslinking method was determined by single factor combined response surface experiment with acetic acid concentration,chitosan to sodium tripolyphosphate mass ratio,stirring rate,curcumin mass concentration,sodium tripolyphosphate mass concentration,and chitosan mass concentration as parameters,and drug encapsulation efficiency as response value.Curcumin nanoparticles were prepared under the optimal process,and the particle size,polydispersity index,Zata potential value,drug loading,stability,hemolysis rate,and antioxidant capacity in vivo and in vitro of the nanoparticles were detected.RESULTS AND CONCLUSION:(1)Among the five extraction methods,the curcumin yield of ionic liquid combined with ultrasound-assisted enzyme extraction was the highest,and this method was selected as the curcumin extraction method for subsequent experiments.The results of single factor combined response surface experiment showed that the optimal process for curcumin extraction was:ionic liquid selected 1-hexyl-3-methylimidazolium chloride,reaction temperature 55 ℃,liquid-to-solid ratio 40 mL/g,ultrasound time 57 minutes,ionic liquid concentration 57％,enzyme-drug mass ratio 3.5:10,and the obtained turmeric extraction yield was 3.10％.The optimal preparation process of curcumin nanoparticles was:glacial acetic acid concentration 0.5％,chitosan and sodium tripolyphosphate mass ratio 5.0:1,stirring speed 150 r/min,curcumin mass concentration 2.23 mg/mL,sodium tripolyphosphate mass concentration 1.45 mg/mL,chitosan mass concentration 3.63 mg/mL,and the obtained drug encapsulation efficiency was 90.61％.(2)The drug loading of curcumin nanoparticles was(14.49±0.23)％,the average particle size was(76.95±1.65)nm,the polydispersity coefficient was 0.15±0.02,and the Zata potential value was(32.37±1.46)mV.The curcumin nanoparticles had good stability and blood compatibility,did not induce hemolysis,and had stronger antioxidant capacity in vivo and in vitro than free curcumin.(3)The results show that the process optimization not only solves the problems of low extraction yield,poor solubility,and low bioavailability of curcumin,but also enhances its antioxidant activity in vivo and in vitro.

Health economics evidence plays an important role in linking clinical value evidence with health resource allocation decisions in the development of clinical practice guidelines. It can not only effectively balance clinical effectiveness and economic feasibility but also avoid forming "idealized" recommendations that are detached from the affordability of the healthcare system or the burden-bearing capacity of patients. To promote guideline developers to use health economics evidence more standardizedly and fully, this paper conducts an in-depth analysis of the current application status, existing challenges, access channels, and application processes of health economics evidence in current guidelines, and on this basis, puts forward considerations and suggestions for strengthening and standardizing the application of health economics evidence in China's clinical practice guidelines.

BACKGROUND:Traditional treatments for corneal alkali burns are limited,especially in controlling inflammation,preventing neovascularization,and inhibiting corneal scarring.Natural,synthetic,or composite materials provide a wide range of treatment options.However,the mechanism by which biomaterials promote corneal alkali burn repair has not yet been systematically understood. OBJECTIVE:To summarize the current research on biomaterials in promoting corneal alkali burn repair in and outside China,and review the mechanism and application of biomaterials in repairing corneal alkali burn. METHODS:The first author searched"cornea,alkali burn,amniotic membrane,hyaluronic acid,collagen,chitosan,polymer materials"as Chinese keywords and"amniotic membrane,hyaluronic acid,collagen,chitosan,polymer,cornea,alkali burn"as English keywords in PubMed,Web of Science,CNKI,and WanFang databases.According to inclusion and exclusion criteria,76 eligible articles were finally included for review. RESULTS AND CONCLUSION:(1)In the field of corneal alkali burn repair,biomaterials such as amniotic membrane,hyaluronic acid,collagen,chitosan,and degradable polymer materials have been widely studied and applied.Each of these biomaterials has its own characteristics,advantages,and disadvantages,and stands out in different aspects.(2)First and foremost,amniotic membranes are considered one of the most promising biomaterials due to their abundance of bioactive factors.They are biocompatible and can regulate the corneal inflammatory response.However,there are issues with donor shortages and susceptibility to infectious diseases.(3)Hyaluronic acid has good moisturizing properties and biocompatibility,and is able to improve the survival rate of corneal cells and increase corneal transparency.(4)The good biocompatibility and scaffold structure of collagen enable the promotion of corneal cell adhesion and proliferation,as well as the reconstruction of corneal tissue structure.(5)Chitosan is recognized for its good biocompatibility and degradability,making it suitable as a carrier for drug delivery and cell transplantation.(6)Degradable polymer materials have good controllability over degradation and can provide a good support and delivery platform for the repair of corneal alkali burns,but further research is needed on their stability and biocompatibility.(7)Overall,there is currently no single biomaterial that can completely address the repair problem of corneal alkali burns,and each biomaterial has its own specific application scenarios and limitations.(8)Future research directions should focus on further improving the properties and structure of biomaterials,exploring more effective combination applications,and deeply understanding the interaction mechanism between biomaterials and corneal tissue,in order to enhance the therapeutic effect of corneal alkali burns and the quality of life of patients.

Object:To explore the feasibility of using artificial intelligence for quality control of echocardiographic images.Methods:Retrospectively，5 000 two-dimensional echocardiographic video images within the period from 2021 to 2023 were randomly retrieved from the echocardiography database of Nanjing Drum Tower Hospital，Affiliated Hospital of Medical School，Nanjing University. Among these selected images，1 559 of them were apical views. The physician team formulated the scoring rules，which specifically included four scoring criteria：gain，scaling ratio，cardiac axis angle，and structure. Subsequently，the data were labeled with view classification and image quality scores. The labeled data were further partitioned into the training set（ n = 643），the validation set（ n = 276），and the test set（ n = 640）. The training and validation sets were utilized for constructing the models for view classification and quality assessment，while the test set was employed to verify the models' effectiveness. The view classification module was implemented using the SlowFast model，and the quality assessment module involved algorithms such as ResNet，Video Swin Transformer，SSD，and U-Net. Results:The average accuracy，precision，recall rate and F1 score of the classification model in identifying each apical view were 0.987 1，0.983 0，0.987 1 and 0.984 9 respectively，and the inference time was（333.4 ± 105.4）ms. The average accuracies of the quality assessment module in terms of gain，scaling ratio，cardiac axis angle and display of main structures were 0.915 1，0.928 2，0.938 7 and 0.965 6 respectively，and the overall scoring accuracy was 0.912 7.Conclusions:The echocardiogram quality control system developed in this research can effectively classify and evaluate the quality of two-dimensional images of the apical views in echocardiograms. Moreover，it guarantees the objectivity，timeliness and high-efficiency of quality control，which has reference value for the establishment of the echocardiogram quality control system.

In February 2025, a local cluster outbreak caused by the D8 genotype Measles virus (MV) was first discovered in Henan Province. Epidemiological investigations and laboratory testing were conducted, including the collection of serum and throat swabs for MV IgM antibody and nucleic acid detection, virus isolation and genetic homology analysis. Measures such as close contact tracing, vaccination rate assessment and supplementary immunization activities were implemented, successfully preventing broader community transmission. A total of three cases were reported during the outbreak, including one imported-related adolescent and two secondary local adult cases. All cases presented with typical symptoms such as fever and rash. Both adult cases were complicated by pneumonia, with one case developing into severe pneumonia. MV genotyping showed that the two secondary cases were both the D8 genotype, with the viral sequences being completely homologous to the Kazakhstan strain. Among the close contacts, 98.2% were adults, and 142 individuals received emergency vaccination.

Objective:To systematically evaluate the incidence and influencing factors of postoperative stroke in patients with acute type A aortic dissection (ATAAD).Methods:Nine Chinese and English databases, including PubMed, Embase, CINAHL, JAMA, The Cochrane Library, CNKI, Wanfang, Vip and Chinese Biomedicine, were searched by computer to include literatures evaluating the incidence of postoperative stroke and its influencing factors in ATAAD patients. The search period was from the establishment of the database to September 2024. Two researchers independently screened the literature, extracted data, and evaluated the risk of bias in the included studies. Stata 14.0 software was used to combine the prevalence rate, and descriptive analysis of influencing factors was performed.Results:A total of 22 articles were included, including 16 734 ATAAD patients, published from 2018 to 2024. Meta-analysis results showed that the incidence of postoperative stroke in ATAAD patients was 16% (14%-18%). Subgroup analyses showed a higher incidence of postoperative stroke in patients with ATAAD in Europe (19%, 95% CI: 15%-23%), with a sample size of 1 to 300 patients (18%, 95% CI: 14%-22%), and in 2024 (20%, 95% CI: 14%-28%). Descriptive analysis shows that the factors influencing the occurrence of postoperative stroke in ATAAD patients include preoperative history (preoperative hypotension, preoperative history of stroke, history of carotid artery disease, history of cardiac arrest), intraoperative measures (total arch replacement, femoral artery intubation, anterograde cerebral perfusion, intraoperative oxygen satiation), and various types of time (cryopreservation time, extracorporeal circulation time, operation time). Conclusion:The incidence of postoperative stroke is higher in ATAAD patients. Preoperative hypotension, history of stroke before surgery, history of carotid artery disease, history of cardiac arrest, total arch replacement, femoral artery intubation, anterograde cerebral perfusion, decrease of cerebral oxygen saturation during operation, and longer hypothermia stop time, cardiopulmonary bypass time and operation time may increase the risk of postoperative stroke in ATAAD patients.

Objective To observe the origin and course of the obturator artery(OA),so as to provide anatomical reference for reducing hemorrhage during pelvic surgery and pubic fracture fixation.Methods A total of 65 human hemi-pelvises specimens with intact structure were dissected to observe the origin,course and other variations of OA.Measure the length of the inner section of OA basin and the outer diameter at the origin,etc.Results OA originated from the internal iliac artery in 57 cases(87.7%),including 3 cases(4.6%)of the superior gluteal artery,5 cases(7.7%)of the inferior gluteal artery,3 cases(4.6%)of the external iliac artery and 5 cases(7.7%)of the inferior epigastric artery.OA participated in the formation of the arterial trunk in 3 cases(4.6%).The length of the pelvic segment of the OA in male and female was(50.87±15.41)mm and(51.71±14.19)mm,respectively,with no statistically significant difference between them(P>0.05).The outer diameters at the origin of the OA in male and female were(2.79±1.05)mm and(2.35±0.86)mm,and there was no statistically significant difference between them(P>0.05).Conclusion OA mainly originated from the anterior trunk of the internal iliac artery,with a few OA originated from the branches of the posterior trunk or the inferior epigastric artery,or participated in the formation of the arterial trunk.In pelvic surgery involving OA area,attention should be paid to the length of its pelvic segment and the outer diameter at the origin of OA,so as to better locate and protect blood vessels during surgery.