ObjectiveTo develop a community-family management model for older adults with mild cognitive impairment (MCI) and to formulate detailed application specifications, and to fully leverage the initiative of communities and families under limited resource conditions, for achieving community-based early detection and early intervention for older adults with MCI. MethodsA systematic literature review was conducted to identify pertinent publications. Corpus-based research methodologies were employed to extract, refine, integrate and synthesize management elements, thereby establishing the specific content and service processes for each stage of the management model. Utilizing the 5W2H analytical framework, essential elements such as management stakeholders, target populations, content and methods for each stage were delineated. The model and its application guidelines were finalized through expert consultation and demonstration. ResultsAn expert evaluation of the management model yielded mean scores of 4.84, 4.32 and 4.84 for acceptability, feasibility and systematicity, respectively. By integrating the identified core elements with expert ratings and feedback, the final iteration of the community-family management model for older adults with MCI was formulated. This model comprised of five stages: screening and identification, comprehensive assessment, intervention planning, monitoring and referral pathways to ensure implementation, and enhanced support for communities, family members and caregivers. Additionally, it included 18 specific application guidelines. ConclusionThe proposed management model may theoretically help delay cognitive decline, improve cognitive function and potentially promote reversal from MCI to normal cognition. It may also enhance the awareness and coping capacity of older adults and their families, strengthen community healthcare professionals' ability to early identify and manage MCI.

The crystalline lens of the eye is recognized as one of the most radiosensitive tissues in the human body. While the International Commission on Radiological Protection (ICRP) has classified ionizing radiation (IR)-induced cataracts as a tissue reaction (deterministic effect) and subsequently reduced the occupational equivalent dose limit for the lens, significant uncertainties remain regarding the precise dose threshold and the complex biological pathways driving lens opacification. This review provides a comprehensive synthesis of current knowledge concerning radiation-induced lens damage, integrating epidemiological exposure characteristics with dose-response modeling and mechanistic molecular insights. First, we analyze exposure characteristics through four epidemiological dimensions: dose, time, space, and population. Clinical evidence suggests that radiation cataracts—particularly posterior subcapsular opacities—exhibit a distinct latency period that is inversely correlated with dose. We highlight that risk is not confined to acute high-dose scenarios (such as in atomic bomb survivors) but is increasingly relevant in chronic low-dose occupational settings (e.g., interventional radiology) and medical diagnostics (e.g., CT scans). Crucially, individual susceptibility is modified by genetic background, age, and environmental co-factors, complicating risk assessment. Second, we critically examine the dose-effect relationship. Although the ICRP suggests a threshold of 0.5 Gy, emerging data challenge the traditional threshold model, with some studies advocating for a linear non-threshold (LNT) relationship. We further discuss the critical roles of radiation quality and dose rate. High linear energy transfer (LET) radiation demonstrates a significantly higher relative biological effectiveness (RBE) for cataractogenesis compared to low-LET radiation. Paradoxically, and unlike many other tissues, the lens may exhibit an “inverse dose-rate effect,” where fractionated or protracted exposures potentially enhance biological damage—a finding that challenges classical radiobiological paradigms. Third, drawing upon the “cataractogenic load” hypothesis and the unique physiological constraints of the lens, this review elucidates the multidimensional molecular mechanisms driving radiation-induced opacification. Key mechanisms include four aspects. (1) DNA damage and repair: IR induces DNA double-strand breaks (DSBs) that, due to the lens’ limited repair capacity (modulated by genes such as ATM, Ptch1, and Ercc2), lead to the accumulation of damage. (2) Antioxidant defense system: dysfunction of the Nrf2/HO-1 antioxidant axis results in redox imbalances, triggering NF-κB-mediated inflammation and protein aggregation. (3) Cell proliferation and senescence: IR disrupts cell cycle regulation, causing a dichotomy of effects—driving premature senescence in some cell populations (evidenced by ATM nuclear foci) while inducing aberrant proliferation via growth factor upregulation (FGF2, TGFβ) in others. (4) Cell migration and adhesion: activation of the Wnt/β‑catenin pathway and alterations in the E-cadherin complex promote the abnormal migration of epithelial cells to the posterior capsule, a hallmark of radiation-induced cataracts. In conclusion, radiation-induced cataractogenesis is a multifactorial process in which genetic susceptibility and environmental stressors converge to overwhelm the lens’ homeostatic thresholds. Future research must prioritize longitudinal cohort studies to refine dose thresholds and employ multi-omics approaches to map the crosstalk between DNA damage responses and matrix remodeling. Establishing a robust mechanistic model is essential for developing targeted radioprotective strategies and optimizing radiation protection standards for occupational and medical safety.

Objective To explore the number of peripheral blood regulatory T cells (Treg) in patients with chronic kidney disease (CKD) and its correlation with vascular calcification. Methods This was a single-center, cross-sectional, and observational study. Non-dialysis patients with CKD treated at Zhongshan Hospital, Fudan University from March 2021 to March 2022 were enrolled. Abdominal aortic calcification (AAC) was assessed using lateral abdominal X-ray. Number of Treg and cytokine levels were measured by flow cytometry. Logistic regression analysis was performed to evaluate the related factors for AAC in CKD patients. Results A total of 83 patients were included, aged 17–86 years, with 57 males (68.7%). The distribution of CKD stages was as follows: stage G1 in 7 patients (8.4%), stage G2 in 17 patients (20.5%), stage G3 in 21 patients (25.3%), stage G4 in 19 patients (22.9%), and stage G5 in 19 patients (22.9%). No AAC was observed in patients with stages G1 and G2, while the prevalence of AAC in patients with stages G3, G4, and G5 was 23.8%, 21.1%, and 26.3%, respectively. Compared with stage G1 patients, those with stages G3–5 showed decreased number of peripheral blood Treg and elevated levels of interleukin (IL)-6 and IL-17F (P＜0.05). The area under the receiver operating characteristic curve for number of peripheral blood Treg in predicting AAC in CKD patients was 0.766 (95%CI 0.652–0.879, P＝0.002). Logistic regression analysis showed that decreased number of Treg was related factor for AAC in CKD patients (OR＝0.957, 95%CI 0.922–0.992, P＝0.018). Conclusion As CKD progresses, number of peripheral blood Treg significantly decreases, which is correlated with AAC in CKD patients.

BACKGROUND:Curcumin is the main active ingredient of turmeric and has significant medicinal value in anti-tumor,anti-inflammatory,antioxidant and other aspects.However,its poor water solubility,unstable chemical properties and easy decomposition lead to difficulty in extracting curcumin and low extraction yield.Therefore,it is particularly important to optimize the curcumin extraction method.OBJECTIVE:To enhance the extraction yield and utilization value of curcumin and optimize the curcumin extraction process and curcumin nanoparticle preparation process.METHODS:Curcumin was extracted from turmeric by ethanol extraction,ultrasonic extraction,ionic liquid extraction,enzyme extraction,and ionic liquid combined with ultrasonic assisted enzyme extraction.The curcumin extraction yield was detected by high performance liquid chromatography;the best extraction method was determined,and subsequent process optimization experiments were carried out.The curcumin extraction yield was the response value with the type of ionic liquid,reaction temperature,ultrasonic time,liquid-to-solid ratio,ionic liquid concentration,and enzyme-drug mass ratio as parameters.The optimal production process of ionic liquid combined with ultrasonic assisted enzyme extraction was determined by single factor combined response surface experiment.The optimal process for preparing curcumin nanoparticles by ionic crosslinking method was determined by single factor combined response surface experiment with acetic acid concentration,chitosan to sodium tripolyphosphate mass ratio,stirring rate,curcumin mass concentration,sodium tripolyphosphate mass concentration,and chitosan mass concentration as parameters,and drug encapsulation efficiency as response value.Curcumin nanoparticles were prepared under the optimal process,and the particle size,polydispersity index,Zata potential value,drug loading,stability,hemolysis rate,and antioxidant capacity in vivo and in vitro of the nanoparticles were detected.RESULTS AND CONCLUSION:(1)Among the five extraction methods,the curcumin yield of ionic liquid combined with ultrasound-assisted enzyme extraction was the highest,and this method was selected as the curcumin extraction method for subsequent experiments.The results of single factor combined response surface experiment showed that the optimal process for curcumin extraction was:ionic liquid selected 1-hexyl-3-methylimidazolium chloride,reaction temperature 55 ℃,liquid-to-solid ratio 40 mL/g,ultrasound time 57 minutes,ionic liquid concentration 57％,enzyme-drug mass ratio 3.5:10,and the obtained turmeric extraction yield was 3.10％.The optimal preparation process of curcumin nanoparticles was:glacial acetic acid concentration 0.5％,chitosan and sodium tripolyphosphate mass ratio 5.0:1,stirring speed 150 r/min,curcumin mass concentration 2.23 mg/mL,sodium tripolyphosphate mass concentration 1.45 mg/mL,chitosan mass concentration 3.63 mg/mL,and the obtained drug encapsulation efficiency was 90.61％.(2)The drug loading of curcumin nanoparticles was(14.49±0.23)％,the average particle size was(76.95±1.65)nm,the polydispersity coefficient was 0.15±0.02,and the Zata potential value was(32.37±1.46)mV.The curcumin nanoparticles had good stability and blood compatibility,did not induce hemolysis,and had stronger antioxidant capacity in vivo and in vitro than free curcumin.(3)The results show that the process optimization not only solves the problems of low extraction yield,poor solubility,and low bioavailability of curcumin,but also enhances its antioxidant activity in vivo and in vitro.

BACKGROUND:Curcumin is the main active ingredient of turmeric and has significant medicinal value in anti-tumor,anti-inflammatory,antioxidant and other aspects.However,its poor water solubility,unstable chemical properties and easy decomposition lead to difficulty in extracting curcumin and low extraction yield.Therefore,it is particularly important to optimize the curcumin extraction method.OBJECTIVE:To enhance the extraction yield and utilization value of curcumin and optimize the curcumin extraction process and curcumin nanoparticle preparation process.METHODS:Curcumin was extracted from turmeric by ethanol extraction,ultrasonic extraction,ionic liquid extraction,enzyme extraction,and ionic liquid combined with ultrasonic assisted enzyme extraction.The curcumin extraction yield was detected by high performance liquid chromatography;the best extraction method was determined,and subsequent process optimization experiments were carried out.The curcumin extraction yield was the response value with the type of ionic liquid,reaction temperature,ultrasonic time,liquid-to-solid ratio,ionic liquid concentration,and enzyme-drug mass ratio as parameters.The optimal production process of ionic liquid combined with ultrasonic assisted enzyme extraction was determined by single factor combined response surface experiment.The optimal process for preparing curcumin nanoparticles by ionic crosslinking method was determined by single factor combined response surface experiment with acetic acid concentration,chitosan to sodium tripolyphosphate mass ratio,stirring rate,curcumin mass concentration,sodium tripolyphosphate mass concentration,and chitosan mass concentration as parameters,and drug encapsulation efficiency as response value.Curcumin nanoparticles were prepared under the optimal process,and the particle size,polydispersity index,Zata potential value,drug loading,stability,hemolysis rate,and antioxidant capacity in vivo and in vitro of the nanoparticles were detected.RESULTS AND CONCLUSION:(1)Among the five extraction methods,the curcumin yield of ionic liquid combined with ultrasound-assisted enzyme extraction was the highest,and this method was selected as the curcumin extraction method for subsequent experiments.The results of single factor combined response surface experiment showed that the optimal process for curcumin extraction was:ionic liquid selected 1-hexyl-3-methylimidazolium chloride,reaction temperature 55 ℃,liquid-to-solid ratio 40 mL/g,ultrasound time 57 minutes,ionic liquid concentration 57％,enzyme-drug mass ratio 3.5:10,and the obtained turmeric extraction yield was 3.10％.The optimal preparation process of curcumin nanoparticles was:glacial acetic acid concentration 0.5％,chitosan and sodium tripolyphosphate mass ratio 5.0:1,stirring speed 150 r/min,curcumin mass concentration 2.23 mg/mL,sodium tripolyphosphate mass concentration 1.45 mg/mL,chitosan mass concentration 3.63 mg/mL,and the obtained drug encapsulation efficiency was 90.61％.(2)The drug loading of curcumin nanoparticles was(14.49±0.23)％,the average particle size was(76.95±1.65)nm,the polydispersity coefficient was 0.15±0.02,and the Zata potential value was(32.37±1.46)mV.The curcumin nanoparticles had good stability and blood compatibility,did not induce hemolysis,and had stronger antioxidant capacity in vivo and in vitro than free curcumin.(3)The results show that the process optimization not only solves the problems of low extraction yield,poor solubility,and low bioavailability of curcumin,but also enhances its antioxidant activity in vivo and in vitro.

ObjectiveTo investigate the association between metabolic associated fatty liver disease （MAFLD） and the risk of atherosclerotic cardiovascular disease （ASCVD）， and to provide data support for the prevention and treatment of such metabolic-associated diseases in clinical practice. MethodsAn observation cohort was established for the workers of Kailuan who underwent physical examination for the first time from June 2006 to October 2007 and had complete liver assessment data， without the history of malignant tumor， MAFLD or ASCVD. According to the presence or absence of MAFLD， the patients were divided into non-MAFLD group with 67 565 patients and MAFLD group with 29 004 patients， and according to the presence or absence of ASCVD， the patients were divided into non-ASCVD group with 69 141 patients and ASCVD group with 481 patients. The group t-test or the Wilcoxon rank-sum test was used for comparison of continuous data between the two groups. The χ² test was used for comparison of categorical data between the two groups. The life-table method was used to calculate the cumulative incidence rates of new-onset ASCVD and MAFLD； the Kaplan-Meier method was used to plot the survival curves of the cumulative incidence rates of ASCVD in the MAFLD group and the non-MAFLD group and the cumulative incidence rates of MAFLD in the ASCVD group and the non-ASCVD group， and the log-rank test was used for comparison of cumulative incidence rates between two groups. A multivariate Cox proportional-hazards regression model analysis was used to investigate the impact of MAFLD on the risk of ASCVD and the impact of ASCVD on the risk of MAFLD. ResultsCompared with the non-MAFLD group， the MAFLD group had significantly higher levels of body mass index （BMI）， waist circumference， systolic blood pressure （SBP）， diastolic blood pressure （DBP）， resting heart rate， alanine aminotransferase， uric acid （UA）， fasting blood glucose （FBG）， triglyceride （TG）， total cholesterol， low-density lipoprotein cholesterol， and high sensitivity C-reactive protein （hs-CRP）， as well as significanty lower levels of estimated glomerular filtration rate （eGFR） and high-density lipoprotein cholesterol （all P <0.05）. Compared with the non-ASCVD group， the ASCVD group had significantly higher levels of BMI， waist circumference， SBP， DBP， UA， FBG， TG， and hs-CRP and a significantly lower level of eGFR （all P<0.05）. The incidence rate of new-onset ASCVD continued to increase over time in the MAFLD group and the non-MAFLD group， while the incidence rate of new-onset MAFLD firstly increased and then remained stable over time in the ASCVD group and the non-ASCVD group. There were 4 263 cases （14.70%） of new-osnet ASCVD in the MAFLD group， with an incidence density of 12.90 per 1 000 person-years， while there were 6 529 cases （9.66%） of new-osnet ASCVD in the non-MAFLD group， with an incidence density of 8.24 per 1 000 person-years， and there were significant differences in the incidence density and cumulative incidence rate of ASCVD between the two groups （χ²=519.09 and 531.80， both P<0.05）. There were 148 cases （30.77%） of new-onset MAFLD in the ASCVD group， with an incidence density of 40.10 per 1 000 person-years， while there were 32 194 cases （46.56%） of new-onset MAFLD in the non-ASCVD group， with an incidence density of 57.59 per 1 000 person-years， and there were significant differences in the incidence density and cumulative incidence rate of MAFLD between the two groups （χ²=19.29 and 30.78， both P<0.05）. The corrected multivariate Cox proportional-hazards regression model analysis showed that MAFLD was a risk factor for new-onset ASCVD （hazard ratio ［HR］=1.11， 95% confidence interval ［CI］： 1.06 — 1.16， P<0.001）， while ASCVD was a protective factor against new-onset MAFLD （HR=0.72， 95%CI： 0.61 — 0.85， P<0.001）. ConclusionThere is a significant association between MAFLD and ASCVD， with an increase in the risk of ASCVD in the MAFLD population and a reduction in the risk of MAFLD in the ASCVD population.

Objective: Scutellarin in Shuganning injection has potential allergenicity and is prone to causing anaphylactoid reactions. There is an urgent need to establish a simple and rapid chromatographic quantitative method to achieve the limit control of scutellarin in Shuganning injection.
Methods: For scutellarin, HPLC method was used in the quantitative analysis using a Shim-pack GIS C₁₈ (2.1 mm×150 mm, 5 μm) column. The mobile phase was a blend of 0.1% trifluoroacetic acid in water and acetonitrile, and gradient elution progress was applied for the whole process. The flow rate was 0.3 mL·min^-1 and the column temperature was maintained at 37 ℃. The detecting wavelength was 320 nm.
Results: The linear regression equation was y=51 456x-27 352, the correlation coefficient r=0.999 8, namely the calibration curve was linear in the range of 1.02-102.00 μg·mL^-1; the average recovery was 103.76%; the detection and quantification limit for determining scutellarin was 0.16 μg·mL^-1 and 0.57 μg·mL^-1, respectively; the injection sample was stable at room temperature for 48 h.
Conclusion: This method is easy to operate, reproducible and has high accuracy, thus can be used for quality control of Shuganning injection.

ObjectiveTo investigate the status and influencing factors of latent tuberculosis infection (LTBI) among close contacts of patients with bacteriologically confirmed pulmonary tuberculosis in Jing’an District, Shanghai, and to provide scientific evidence for the development of tuberculosis infection testing and preventive intervention strategies for close contacts of bacteriologically positive patients. MethodsFrom October 2022 to October 2023, patients with bacteriological confirmed pulmonary tuberculosis registered in Jing’an District, Shanghai, and their close contacts were enrolled as the research subjects. The close contacts were screened for tuberculosis infection using the interferon-γ release assay (IGRA). The chi-square test and binary logistic regression model were used to analyze factors influencing LTBI. ResultsA total of 112 close contacts were included, of whom 30 (26.79%) were male and 82 (73.21%) were female. The age ranged from 1 to 86 years, with a median (25th, 75th percentiles) of 47.50 (32.25, 61.00) years. The infection rate of LTBI was 21.43% (24/112), and the incidence of active pulmonary tuberculosis was 2.68% (3/112). Univariate analyses showed that a positive sputum smear of the index case, being a direct relative of the index case, co-living, and not wearing a mask were significantly associated with LTBI (all P<0.05). Multivariate logistic regression analyses showed that the risk of latent infection in close contacts of the index case with a positive sputum smear was 6.50 times higher than in those with a negative sputum smear (95%CI: 1.82‒23.25, P=0.004). ConclusionThe infection rate of LTBI in close contacts of patients with bacteriologically confirmed pulmonary tuberculosis in Jing’an District, Shanghai, is relatively high, and close contacts of sputum smear-positive patients face an even higher risk of infection. Therefore, tuberculosis infection screening and follow-up management should be strengthened for this population.

ObjectiveTo evaluate the corrective effects of a three-stage structured Tai Chi training program on abnormal neck and shoulder posture from a biomechanical perspective. MethodsEighty-two participants with abnormal neck and shoulder posture were randomly assigned to a treatment group and a control group， with 41 participants in each group. The treatment group received three-stage structured Tai Chi training six times per week， while the control group received online health education once per week. Both interventions lasted for 12 weeks. The primary outcome cervical postural deviation angle， and the secondary outcomes including cervical loading and bilateral shoulder horizontal deviation angle， were assessed before intervention， after 6 weeks and 12 weeks of intervention. Safety was also evaluated. ResultsUltimately， 40 participants from each group were included in the analysis. In the treatment group， cervical postural deviation angle and cervical spine loading were significantly reduced after 12 weeks of intervention compared with baseline and after 6 weeks of intervention. The bilateral shoulder horizontal deviation angle decreased significantly after both 6 and 12 weeks of intervention compared with baseline （P＜0.05）. In the control group， cervical spine loading was reduced after 6 and 12 weeks of intervention compared with baseline （P＜ 0.05）. After 12 weeks of intervention， the treatment group showed lower cervical postural deviation angle and bilateral shoulder horizontal deviation angle than the control group， whereas cervical loading was higher in the treatment group after 6 weeks of intervention （P＜0.05）. Significant differences were observed between groups in the changes from baseline to week 12 for cervical postural deviation angle and bilateral shoulder horizontal deviation angle， as well as in the changes from baseline to week 6 for cervical loading and bilateral shoulder horizontal deviation angle （P＜ 0.05）. No significant adverse events occurred in either group during the intervention period. ConclusionThree-stage structured Tai Chi can effectively improve abnormal neck and shoulder posture， demonstrating good safety and feasibility.

Objective To evaluate the clinical efficacy of valve-in-valve transcatheter mitral valve replacement for the management of degenerated bioprosthetic mitral valves. Methods This study retrospectively analyzed the clinical data of patients who underwent transcatheter mitral valve replacement due to degenerated bioprosthetic mitral valves at the First Affiliated Hospital of Zhengzhou University from 2020 to 2023. The analysis included baseline characteristics, surgical details, perioperative complications, and hemodynamic changes during the early postoperative period and subsequent follow-up. Results A total of 31 patients were included in the study, comprising 7 males and 24 females, with an average age of (66.57±9.32) years. The average duration since the initial surgical placement of the bioprosthetic valves was (9.92±3.71) years. The procedures included 7 patients utilizing the transfemoral venous-atrial septal approach and 24 patients employing the transapical approach. All patients exhibited significant improvement in cardiac function postoperatively, with a reduction in the number of patients classified as New York Heart Association (NYHA) grade Ⅲ or Ⅳ and those with moderate to severe tricuspid valve regurgitation. Echocardiographic assessments revealed a decrease in peak flow velocity across the mitral valve and a reduction in the average transvalvular pressure gradient, while left ventricular ejection fraction remained unchanged. One patient experienced a recurrent stroke and died on the fifth postoperative day; however, the remaining patients were discharged uneventfully, without complications such as cardiac death, left ventricular outflow tract obstruction, or pacemaker implantation. During a median follow-up period of 12 months, no adverse events were reported, and hemodynamic stability was maintained. Conclusion Valve-in-valve transcatheter mitral valve replacement is a safe and effective option for patients with degenerated bioprosthetic mitral valves, demonstrating favorable hemodynamic outcomes and satisfactory short-term clinical results.