Objective: To observe the radial artery thrombosis (RAT) during transradial coronary angiography (CAG) and/or percutaneous coronary intervention (PCI) by optical coherence tomography (OCT), and to investigate the risk factors of RAT during the CAG and/or PCI. Methods: In this retrospective study, we consecutively reviewed the radial artery OCT examination results of the patients who underwent OCT guided transradial CAG and/or PCI for acute coronary syndrome in heart center of Beijing Luhe hospital, Capital Medical University from October 2017 to July 2018. The incidence of RAT was observed. The patients were divided into the RAT group and non-RAT group, clinical data were collected and compared. Moreover, the types and distributions of thrombus in radial artery as well as the acute radial artery injuries under OCT were observed. Univariate analysis followed by multivariate analysis were performed to identify potential risk factors. The radial artery patency and ischemic symptoms of the involved limb were followed up at the 24-hour and the 1-month after procedure. Results: A total of 107 patients were included, the age was (58.1±12.5), and 78.5% were male (n=84). The incidence of RAT was 26.2% (n=28, 95%CI 17.9%-34.5%), and the main type of thrombus was white thrombus (n=15, 53.6%). The commonest position of RAT was the proximal portion of radial artery (n=17, 60.7%). The median thrombus volume was 0.05(0.03, 0.38) mm³, and the median thrombus score was 6.5 (3.3, 13.8). In univariate analysis, the frequency of acute radial artery injury and use of bivalirudin were significantly higher and the procedure time was significantly longer in RAT group than those in non-RAT group (all P<0.05). Multivariate regression analysis showed that the radial artery acute injury (OR=5.82, 95%CI: 2.09-16.20, P=0.001) and the procedure time (OR=1.04, 95%CI: 1.01-1.06, P=0.006) were independent risk factors of RAT. Rate of radial artery occlusion at 24 hours follow-up was similar between RAT and non-RAT group (7.14%(2/28), vs. 10.13%(8/79), P=1.000). None of the patients complicated severe ischemic symptom of the operative limb. Conclusions: RAT is a high frequency access complication during transradial coronary intervention. This phenomenon can be accurately observed by OCT. Acute radial artery injury and prolonged procedure time are risk factors of RAT during transradial coronary intervention.

The objective of this work was to develop a bioassay to quantify the antiplatelet aggregation activity of hirudo for quality evaluation and control. Antithrombin activity of hirudo extracted by high temperature decoction was determined by thrombin titration. Antiplatelet aggregation activity of hirudo was determined through pharmacodynamic experiments in vitro and in vivo using a bioassay we developed for quantifying inhibition of platelet aggregation. Methodological investigation was carried out and the titers of 12 batches of hirudo samples were determined. During the experiment, the disposal of animals is in accordance with the ethical standards of animal experiments. The results showed that the antithrombin activity of hirudo decocted at high temperature decreased significantly and almost lost its activity. Hirudo inhibited platelet aggregation and results in vivo and in vitro were consistent. These assays were employed to test 12 batches of hirudo. The results demonstrated that the biopotency of 12 batches was 113.49, 96.13, 121.22, 127.33, 83.48, 108.72, 131.41, 127.95, 76.90, 126.27, 132.89 and 573.53 U·mg^-1. The method was reliable and reproducible and can be used to assess the quality of hirudo.

OBJECTIVE: To study and measure the anatomic structure of lumbar vertebral endplate structure in healthy adults by computed tomography(CT) technique in order to provide a useful guidance for the optimal design and clinical application of lumbar prostheses. METHODS: Sixty healthy adults (male and female equals) were recruited for full-waist CT scan after signing the informed consent form in the imaging department of the Second Affiliated Hospital of Xi'an Jiaotong University. The scanning data was imported into the computer aided software Mimics 16.0 for 3D reconstruction and measurement. The acquisition indexes included median sagittal diameter, maximum coronal diameter, concavity depth, median sagittal depression angle, coronal depression angle and so on. Finally, the collected data were statistically analyzed by the statistical software. RESULTS: The median sagittal diameter and the maximum coronal diameter of the upper and lower endplates were not only different between the different sexes(<0.05), but also were increased with the increase of the lumbar spine sequence. The concavity depth of upper and lower endplates had no gender differences(>0.05), but had a little change from L₁ to L₅, fluctuating from 1.5 to 2.0 mm and from 2.2 to 3.9 mm, respectively. In the same sequence, the concavity depth of lower endplate in males was greater than that of upper endplate, and the difference was statistically significant(<0.05), but there was no significant difference in the concavity depth of upper and lower endplate in females(>0.05). Sagittal concavity angle and coronal concavity angle of upper and lower endplates changed slightly with the increase of vertebral order, and there was no gender difference in sagittal and coronal concavity angle of most vertebral sequences (>0.05). Statistics showed that the largest concavity near the caudal lumbar endplate was located on the dorsal side of the endplate plane. CONCLUSIONS The anatomical structure of the lumbar endplate is very complicated. It is important to master the anatomical parameters of the endplate and make full use of CT before operation for the development and clinical application of the lumbar prosthesis.
Female ; Humans ; Lumbar Vertebrae ; Lumbosacral Region ; Male ; Prostheses and Implants ; Tomography, X-Ray Computed

OBJECTIVETo explore the feasibility and the attention of perioperative management of goat lumbar fusion model for individualized 3D printing technology.

METHODSAccording to preoperative X-ray and CT three dimensional reconstruction data of 10 males Boer goat's lumbar(1-2 years old, weight 35-45 kg), the preoperative open height were determined, meanwhile, according to the theoretical entry point of nails, the length of steel plate, arc, and setting position, screw length for reference were determined, the lumbar lateral anterior plate was designed and 3D-printed. Goats lied on the right side, under the general anesthesia, the lumbar vertebrae of the goats and the adjacent intervertebral disc were resected, and the titanium cage after the bone graft was implanted into the goat, the 3D-print lateral bone plate was fixed. After operation, feeding, fluid infusion, anti infection, postoperative complications management, respiratory digestion perioperative management were performed.

RESULTSThe 10 models for goats were successful in results. Postoperative X-ray film and three-dimensional reconstruction of CT showed that titanium cage and bone plate were in good position and reliable. Three months after the operation, CT 3D reconstruction and micro-CT of the goat were observed, and the fusion of the spine was observed. Imaging studies showed that the fusion of the lateral bone plate fixation titanium cage was both at the end of the titanium cage and the dense bone trabecular formation between the vertebral bodies.

CONCLUSIONSThe 3D printing technology sets up the goat lumbar spinal fusion model successfully, which is a kind of effective, more successful, reliable and stable method, perioperative management. The method is scientific, practical, and more humanized, to ensure that lumbar lateral successfully implanted the nail plate of lateralanterior internal fixation system, with reduction of occurrence of surgical complications.

PsMt 01 mRNA biological function was forecasted by using the method of real-time fluorescence quantitative (qRT-PCR) in different stage of Paragonimus skrjabini.Total RNA was extracted with Trizol reagents from the eggs, larvae, metacercaria, immature worm schistosomulum, adult stages respectively and transcribed reversely into cDNA.qRT-PCR was used to detect the expression level of PsMt 01 mRNA.The results of qRT-PCR displayed that the expression of PsMt01 mRNA increased gradually with the development of present, especially in the period of larva-5w (42.56 ±0.35) and larva-7w (44.12 ±0.56) within weeks, PsMt01 mRNA reached the peak level.Accordingly, we concluded that PsMt 01 may play an important role during the early P.skrjabini development stage, which may be associated with immune escape and organizing migration activities.

The authors reviewed the new technologies used for Panax genus research, including molecular identification technologies (especially for DNA barcoding), modern biotechnologies (e. g. the first generation and second generation sequencing technologies), and gene cloning and identification in this paper. These technologies have been successfully applied to species identification, transcriptome analysis, secondary metabolite biosynthetic pathway and the key enzyme function identification, indicating that the application of modern biotechnologies provide guarantee for the molecular identification of Panax genus. The application of modern biotechnologies also reveals the genetic information of transcriptome and functional genomics, and promotes the design of Panax plants genomic map. In summary, the application of the new technologies lay the foundation for clarifying the molecular mechanisms of ginsenoside biosynthesis and enforcing the in vitro synthesis of important natural products and new drugs in future.
Biotechnology ; methods ; Cloning, Molecular ; DNA Fingerprinting ; Ginsenosides ; biosynthesis ; Panax ; enzymology ; genetics ; metabolism ; Research Design

Objective To investigate the influence of different protrusion distance of stent strut into the subclavian artery on local hemodynamics of the vertebral artery (VA) ostium.Methods Five models of the VA were established. Model 1 was without stent implantation, Model 2 to 5 was with stent protruding into the subclavian artery for 0, 1, 2, 3 mm, respectively. Computational fluid dynamics analysis was performed to study the differences of hemodynamics in these models. Results After stent implantation, the wall shear stress and the blood flow velocity at the stent segment in the Model 2 was reduced by 85.33% and 35.36%, respectively. The phenomenon of swirling flow disappeared. For models with different protrusion distance, the maximum difference of wall shear stress of VA was 0.76%, and the maximum difference of blood flow velocity is 0.45%. ConclusionsStent implantation can improve the hemodynamics of vertebral artery ostium stenosis, while the protrusion distance of stent strut has no obvious influence on the blood flow velocity and wall shear stress.