OBJECTIVE To explore the association between the use of oral progesterone drugs in early pregnancy and gestational diabetes mellitus （GDM）. METHODS Through real-world retrospective cohort research method， pregnant women who underwent the oral glucose tolerance test （OGTT） at the Affiliated Maternal and Child Health Hospital of Nantong University between January 2022 and January 2023 were enrolled. Based on whether oral progesterone drugs were used in early pregnancy， they were divided into treatment group and control group； propensity score matching （PSM） with a 1∶1 ratio was employed to control for confounding factors； Logistic regression and linear regression were employed to analyze the association between drug factors （whether use of oral progesterone drug， duration of medication， dosage， and drug type） and outcome indicators （occurrence of GDM， fasting blood glucose levels， and OGTT 1 and 2 h blood glucose levels in late pregnancy）. RESULTS A total of 709 pregnant women were enrolled in the two groups before PSM； after PSM， 256 cases were included in both the treatment group and the control group. The results of association analysis indicated that there was no significant association between the use of oral progesterone drugs and GDM （P＞0.05）； but a significant correlation was found with OGTT 1 h blood glucose levels [β＝0.965， 95%CI （0.007，1.922）， P＜0.05]， specifically with Dydrogesterone tablets [β＝0.977， 95%CI （0.009， 1.944）， P＜0.05] and Progesterone soft capsules [β ＝1.089， 95%CI （0.077， 2.102）， P＜0.05]. There was no significant correlation between other drug factors and outcome indicators （P＞0.05）. CONCLUSIONS The use of oral progestogen drugs in early pregnancy is not significantly associated with GDM. The blood glucose levels in late pregnancy， especially OGTT 1 h blood glucose levels， have a certain correlation with Progesterone soft capsules and Dydrogesterone tablets.

The phase changes and quantity-quality transfer of 17 batches of Ostreae Concha(Ostrea rivularis) during the raw material-calcined decoction pieces-standard decoction process were analyzed. The content of calcium carbonate(CaCO_3), the main component, was determined by chemical titration, and the extract yield and transfer rate were calculated. The CaCO_3 content in the raw material, calcined decoction pieces, and standard decoction was 94.39%-98.80%, 95.03%-99.22%, and 84.58%-90.47%, respectively. The process of raw material to calcined decoction pieces showed the yield range of 96.85% to 98.55% and the CaCO_3 transfer rate range of 96.92% to 99.27%. The process of calcined decoction pieces to standard decoction showed the extract yield range of 2.86% to 5.48% and the CaCO_3 transfer rate range of 2.59% to 5.13%. The results of X-ray fluorescence(XRF) assay showed that the raw material, calcined decoction pieces, and standard decoction mainly contained Ca, Na, Mg, Si, Br, Cl, Al, Fe, Cr, Mn, and K. The chemometric results showed an increase in the relative content of Cr, Fe, and Si from raw material to calcined decoction pieces and an increase in the relative content of Mg, Al, Br, K, Cl, and Na from calcined decoction pieces to standard decoction. X-ray diffraction(XRD) was employed to establish XRD characteristic patterns of the raw material, calcined decoction pieces, and standard decoction. The XRD results showed that the main phase of all three was calcite, and no transformation of crystalline form or generation of new phase was observed. Fourier transform infrared spectroscopy(FTIR) was employed to establish the FTIR characteristic spectra of the raw material, calcined decoction pieces, and standard decoction. The FTIR results showed that the raw material had internal vibrations of O-H, C-H, C=O, C-O, and CO■ groups. Due to the loss of organic matter components after calcination, no information about the vibrations of C-H, C=O, and C-O groups was observed in the spectra of calcined decoction pieces and standard decoction. In summary, this study elucidated the quantity-quality transfer and phase changes in the raw material-calcined decoction pieces-standard decoction process by determining the CaCO_3 content, calculating the extract yield and transfer rate, and comparing the element changes, FTIR characteristic spectra, and XRD characteristic pattern. The results were reasonable and reliable, laying a foundation for the subsequent process research and quality control of the formula granules of calcined Ostreae Concha(O. rivularis Gould), and providing ideas and methods for the quality control of the whole process of raw material-decoction pieces-standard decoction-formula granules of Ostreae Concha and other testacean traditional Chinese medicine.
Drugs, Chinese Herbal/isolation & purification* ; Calcium Carbonate/analysis* ; Quality Control

Guided by the concept of quality by design(QbD), this study optimizes the calcination and quenching process of calcined Magnetitum and establishes the XRD characteristic spectra of calcined Magnetitum, providing a scientific basis for the formulation of quality standards. Based on the processing methods and quality requirements of Magnetitum in the Chinese Pharmacopoeia, the critical process parameters(CPPs) identified were calcination temperature, calcination time, particle size, laying thickness, and the number of vinegar quenching cycles. The critical quality attributes(CQAs) included Fe mass fraction, Fe~(2+) dissolution, and surface color. The weight coefficients were determined by combining Analytic Hierarchy Process(AHP) and the criteria importance though intercrieria correlation(CRITIC) method, and the calcination process was optimized using orthogonal experimentation. Surface color was selected as a CQA, and based on the principle of color value, the surface color of calcined Magnetitum was objectively quantified. The vinegar quenching process was then optimized to determine the best processing conditions. X-ray diffraction(XRD) was used to establish the characteristic spectra of calcined Magnetitum, and methods such as similarity evaluation, cluster analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to evaluate the quality of the spectra. The optimized calcined Magnetitum preparation process was found to be calcination at 750 ℃ for 1 h, with a laying thickness of 4 cm, a particle size of 0.4-0.8 cm, and one vinegar quenching cycle(Magnetitum-vinegar ratio 10∶3), which was stable and feasible. The XRD characteristic spectra analysis method, featuring 9 common peaks as fingerprint information, was established. The average correlation coefficient ranged from 0.839 5-0.988 1, and the average angle cosine ranged from 0.914 4 to 0.995 6, indicating good similarity. Cluster analysis results showed that Magnetitum and calcined Magnetitum could be grouped together, with similar compositions. OPLS-DA discriminant analysis identified three key characteristic peaks, with Fe_2O_3 being the distinguishing component between the two. The final optimized processing method is stable and feasible, and the XRD characteristic spectra of calcined Magnetitum was initially established, providing a reference for subsequent quality control and the formulation of quality standards for calcined Magnetitum.
X-Ray Diffraction/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Particle Size

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

PURPOSE: Septic shock is associated with high mortality and poor outcomes among sepsis patients with coagulopathy. Although traditional statistical methods or machine learning (ML) algorithms have been proposed to predict septic shock, these potential approaches have never been systematically compared. The present work aimed to develop and compare models to predict septic shock among patients with sepsis. METHODS: It is a retrospective cohort study based on 484 patients with sepsis who were admitted to our intensive care units between May 2018 and November 2022. Patients from the 908th Hospital of Chinese PLA Logistical Support Force and Nanchang Hongdu Hospital of Traditional Chinese Medicine were respectively allocated to training (n=311) and validation (n=173) sets. All clinical and laboratory data of sepsis patients characterized by comprehensive coagulation indexes were collected. We developed 5 models based on ML algorithms and 1 model based on a traditional statistical method to predict septic shock in the training cohort. The performance of all models was assessed using the area under the receiver operating characteristic curve and calibration plots. Decision curve analysis was used to evaluate the net benefit of the models. The validation set was applied to verify the predictive accuracy of the models. This study also used Shapley additive explanations method to assess variable importance and explain the prediction made by a ML algorithm. RESULTS: Among all patients, 37.2% experienced septic shock. The characteristic curves of the 6 models ranged from 0.833 to 0.962 and 0.630 to 0.744 in the training and validation sets, respectively. The model with the best prediction performance was based on the support vector machine (SVM) algorithm, which was constructed by age, tissue plasminogen activator-inhibitor complex, prothrombin time, international normalized ratio, white blood cells, and platelet counts. The SVM model showed good calibration and discrimination and a greater net benefit in decision curve analysis. CONCLUSION The SVM algorithm may be superior to other ML and traditional statistical algorithms for predicting septic shock. Physicians can better understand the reliability of the predictive model by Shapley additive explanations value analysis.
Humans ; Shock, Septic/blood* ; Machine Learning ; Male ; Female ; Retrospective Studies ; Middle Aged ; Aged ; Sepsis/complications* ; ROC Curve ; Cohort Studies ; Adult ; Intensive Care Units ; Algorithms ; Blood Coagulation ; Critical Illness

Insulin-like growth factor 2 (IGF2) is a critical endocrine mediator implicated in male reproductive physiology. To investigate the correlation between IGF2 protein levels and various aspects of male infertility, specifically focusing on sperm quality, inflammation, and DNA damage, a cohort of 320 male participants was recruited from the Women's Hospital, Zhejiang University School of Medicine (Hangzhou, China) between 1 st January 2024 and 1 st March 2024. The relationship between IGF2 protein concentrations and sperm parameters was assessed, and Spearman correlation and linear regression analysis were employed to evaluate the independent associations between IGF2 protein levels and risk factors for infertility. Enzyme-linked immunosorbent assay (ELISA) was used to measure IGF2 protein levels in seminal plasma, alongside markers of inflammation (tumor necrosis factor-alpha [TNF-α] and interleukin-1β [IL-1β]). The relationship between seminal plasma IGF2 protein levels and DNA damage marker phosphorylated histone H2AX (γ-H2AX) was also explored. Our findings reveal that IGF2 protein expression decreased notably in patients with asthenospermia and teratospermia. Correlation analysis revealed nuanced associations between IGF2 protein levels and specific sperm parameters, and low IGF2 protein concentrations correlated with increased inflammation and DNA damage in sperm. The observed correlations between IGF2 protein levels and specific sperm parameters, along with its connection to inflammation and DNA damage, underscore the importance of IGF2 in the broader context of male reproductive health. These findings lay the groundwork for future research and potential therapeutic interventions targeting IGF2-related pathways to enhance male fertility.
Humans ; Male ; Insulin-Like Growth Factor II/metabolism* ; Infertility, Male/genetics* ; DNA Damage ; Adult ; Inflammation/metabolism* ; Spermatozoa/metabolism* ; Semen Analysis ; Semen/metabolism* ; Tumor Necrosis Factor-alpha/metabolism* ; Histones/metabolism* ; Interleukin-1beta/metabolism*

OBJECTIVE: To investigate the characteristics of gut microbiota changes in patients with acute myeloid leukemia (AML) undergoing induction chemotherapy and to explore the relationship between infectious complications and gut microbiota. METHODS: Fecal samples were collected from 37 newly diagnosed AML patients at four time points: before induction chemotherapy, during chemotherapy, during the neutropenic phase, and during the recovery phase. Metagenomic sequencing was used to analyze the dynamic changes in gut microbiota. Correlation analyses were conducted to assess the relationship between changes in gut microbiota and the occurrence of infectious complications. RESULTS: During chemotherapy, the gut microbiota α-diversity (Shannon index) of AML patients exhibited significant fluctuations. Specifically, the diversity decreased significantly during induction chemotherapy, further declined during the neutropenic phase (P < 0.05, compared to baseline), and gradually recovered during the recovery phase, though not fully returning to baseline levels.The abundances of beneficial bacteria, such as Firmicutes and Bacteroidetes, gradually decreased during chemotherapy, whereas the abundances of opportunistic pathogens, including Enterococcus, Klebsiella, and Escherichia coli, progressively increased.Analysis of the dynamic changes in gut microbiota of seven patients with bloodstream infections revealed that the bloodstream infection pathogens could be detected in the gut microbiota of the corresponding patients, with their abundance gradually increasing during the course of infection. This finding suggests that bloodstream infections may be associated with opportunistic pathogens originating from the gut microbiota.Compared to non-infected patients, the baseline samples of infected patients showed a significantly lower relative abundance of Bacteroidetes (P < 0.05). Regression analysis indicated that Bacteroidetes abundance is an independent predictive factor for infectious complications (P < 0.05, OR =13.143). CONCLUSION During induction chemotherapy in AML patients, gut microbiota α-diversity fluctuates significantly, and the abundance of opportunistic pathogens increase, which may be associated with bloodstream infections. Patients with lower baseline Bacteroidetes abundance are more prone to infections, and its abundance can serve as an independent predictor of infectious complications.
Humans ; Gastrointestinal Microbiome ; Leukemia, Myeloid, Acute/microbiology* ; Induction Chemotherapy ; Feces/microbiology* ; Male ; Female ; Middle Aged

BACKGROUND: Quantitative flow ratio (QFR) holds significant value in guiding drug-coated balloon (DCB) treatment and enhancing outcomes. However, the predictive capability of post-angioplasty QFR for long-term clinical events in patients with de novo lesions who receive DCB treatment remains uncertain. The aim of this study was to explore the potential significance of post-angioplasty QFR measurements in predicting clinical outcomes in patients underwent DCB treatment for de novo lesions. METHODS: Patients who underwent DCB-only intervention for de novo lesions were enrolled. QFR was conducted after DCB treatment. The patients were then categorized based on post-angioplasty QFR. The primary endpoint was major adverse cardiac events (MACE), encompassing all-cause death, cardiovascular death, nonfatal myocardial infarction, stroke, and target vessel revascularization. RESULTS: A total of 553 patients with 561 lesions were included. The median follow-up period was 505 days, during which 66 (11.8%) MACEs occurred. Based on post-procedural QFR grouping, there were 259 cases in the high QFR group (QFR > 0.93) and 302 cases in the low QFR group (QFR ≤ 0.93). Kaplan-Meier analysis revealed a significantly higher cumulative incidence of MACE in the low QFR group (log-rank P = 0.004). The multivariate Cox proportional hazards model demonstrated a significant inverse correlation between QFR and the occurrence of MACEs (HR = 0.522, 95%CI: 0.289-0.942, P = 0.031). Landmark analysis indicated that high QFR had a significant reducing effect on the cumulative incidence of MACEs within 1 year (log-rank P = 0.016) and 1-5 years (log-rank P = 0.026). CONCLUSIONS In patients who underwent DCB-only treatment for de novo lesions, higher post-procedural QFR values (> 0.93) were identified as an independent protective factor against adverse prognosis.

Purpose::In patients with heatstroke, disseminated intravascular coagulation (DIC) is associated with greater risk of in-hospital mortality. However, time-consuming assays or a complex diagnostic system may delay immediate treatment. Therefore, the present study proposes a new heatstroke-induced coagulopathy (HIC) score in patients with heat illness as an early warning indicator for DIC.Methods::This retrospective study enrolled patients with heat illness in 24 Chinese hospitals from March 2021 to May 2022. Patients under 18 years old, with a congenital clotting disorder or liver disease, or using anticoagulants were excluded. Data were collected on demographic characteristics, routine blood tests, conventional coagulation assays and biochemical indexes. The risk factors related to coagulation function in heatstroke were identified by regression analysis, and used to construct a scoring system for HIC. The data of patients who met the diagnostic criteria for HIC and International Society on Thrombosis and Haemostasis defined-DIC were analyzed. All statistical analyses were performed using SPSS 26.0.Results::The final analysis included 302 patients with heat illness, of whom 131 (43.4%) suffered from heatstroke, including 7 death (5.3%). Core temperature ( OR = 1.681, 95% CI 1.291 - 2.189, p < 0.001), prothrombin time ( OR = 1.427, 95% CI 1.175 - 1.733, p < 0.001) and D-dimer ( OR = 1.242, 95% CI 1.049 - 1.471, p = 0.012) were independent risk factors for heatstroke, and therefore used to construct an HIC scoring system because of their close relation with abnormal coagulation. A total score ≥ 3 indicated HIC, and HIC scores correlated with the score for International Society of Thrombosis and Hemostasis-DIC ( r = 0.8848, p < 0.001). The incidence of HIC (27.5%) was higher than that of DIC (11.2%) in all of 131 heatstroke patients. Meanwhile, the mortality rate of HIC (19.4%) was lower than that of DIC (46.7%). When HIC developed into DIC, parameters of coagulation dysfunction changed significantly: platelet count decreased, D-dimer level rose, and prothrombin time and activated partial thromboplastin time prolonged ( p < 0.05). Conclusions::The newly proposed HIC score may provide a valuable tool for early detection of HIC and prompt initiation of treatment.