Bile-processed Coptidis Rhizoma（B-pCR）， first documented in Shengji Zonglu， is a unique processed products of Coptidis Rhizoma（CR） characterized by "mutual enhancement processing" and "enhancing the cold property of cold-natured herbs". Pig bile can enhance the bitter and cold properties of CR， yielding potent effects in purging excess fire from the liver and gallbladder. The processing increases the dissolution of alkaloids such as berberine， coptisine， and palmatine， while introducing bile acids from pig bile， including taurine-type and glycine-type cholic acids. This enhances its pharmacological effects， such as antipyretic activity， regulation of glucose and lipid metabolism disorders， and intestinal absorption. Traditional processing techniques and quality standards for B-pCR are outlined in the Shanghai Traditional Chinese Medicine（TCM） Decoction Pieces Processing Standard and the Gansu TCM Processing Standard. However， incomplete specifications for critical process parameters and quality criteria significantly impact its production and clinical application. A review of research over the past two decades on the processing history， process optimization， quality evaluation， material basis， and changes in pharmacological effects and properties of B-pCR reveals that the pretreatment method and dosage of pig bile， and processing temperature are key factors influencing its quality. Furthermore， current quality standards lack specific indicators. Additionally， the enhancement of the cold property and medicinal efficacy direction of B-pCR is not only associated with changes in alkaloid groups but also depend on the synergistic effects of bile acids. This review can provide insights for improving the quality evaluation system of B-pCR.

Gorham-Stout disease(GSD) is a rare osteolytic disorder characterized by spontaneous and progressive osteolysis, along with abnormal angiogenesis and lymphangiogenesis, with no new bone formation. We present a case of a 15-year-old female admitted due to " recurrent right leg pain for 5 years, 11 months after undergoing right femoral fracture surgery". Through comprehensive integration of the patient's clinical phenotype, laboratory tests, imaging findings, pathological examinations, and molecular biological test results, GSD was considered highly likely. A multidisciplinary treatment approach was conducted, including a combination of zoledronic acid and sirolimus to inhibit osteolysis, along with rehabilitation training and orthopedic intervention, providing a personalized and comprehensive treatment strategy.

This study aimed to investigate the effects of zidovudine (AZT) on high-fat diet (HFD)-induced metabolic disturbances in rats and its underlying mechanisms. The HFD rat model was established, and the animals were divided into the control group, the model group, and the AZT-treated group at low (25 mg/kg) and high (50 mg/kg) doses. Metabolic phenotype, hepatic lipid deposition, oxidative stress, mitochondrial function, and peroxisome proliferator-activated receptor (PPAR) signaling were evaluated. AZT treatment significantly mitigated HFD-induced body weight gain and reduced both the mass and adipocyte size of inguinal and epididymal white adipose tissues; it also enhanced metabolic flexibility and improved glucose tolerance without elevating blood lactate levels. High-dose AZT further lowered hepatic triglyceride accumulation, ameliorated steatosis, and additionally, attenuated hepatic oxidative stress by increasing superoxide dismutase (SOD) activity and decreasing malondialdehyde (MDA) levels. Western blot analysis revealed that AZT upregulated hepatic PPARα and carnitine palmitoyltransferase 1α (CPT1α), while downregulating PPARγ expression. In conclusion, AZT effectively ameliorates HFD-induced metabolic disorders without inducing mitochondrial toxicity, which may be related to the promotion of fatty acid oxidation, the reduction of oxidative stress, and the modulation of both the PPAR signaling pathway and pyrimidine metabolism.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

Objective: To investigate the ability of different concentrations of piceatannol (PIC) solution to biomodify decalcified dentin matrices in primary teeth, thereby providing a theoretical basis for improving the durability of resin-dentin bonding. Methods: This study was approved by the Medical Ethics Committee of the institution. Molecular docking was performed to predict the interaction effects of PIC with type I collagen and matrix metalloproteinases (MMPs) in dentin. A total of 124 clinically extracted intact primary molars were selected due to retention; of these, 76 were prepared into 60 completely decalcified dentin beams and 24 dentin slices. The 60 beams were equally allocated for dry mass loss and swelling ratio testing (30 beams each). For both experiments, the beams were randomly divided into five groups (n = 6): a control group, 5% glutaraldehyde group, and 2.5, 5, and 10 mg/mL PIC solution groups. This was to evaluate the anti-enzymatic hydrolytic properties and mechanical performance of type I collagen. Of the 24 slices, 15 were assigned to the aforementioned five groups (n = 3) for Fourier-transform infrared spectroscopy (FTIR) to explore the cross-linking mechanism. The remaining nine slices were randomly divided into three groups (n = 3): distilled water group A (SEM examination prior to enzymatic hydrolysis), distilled water group B (SEM examination after enzymatic hydrolysis), and a 10 mg/mL PIC solution group (SEM examination after treatment with 10 mg/mL PIC and subsequent enzymatic hydrolysis). This was to evaluate the cross-linking effect on demineralized dentin collagen. The remaining 48 molars were fabricated into bonding specimens and randomly divided into four groups (n = 12): a control group (distilled water group) and 2.5, 5, and 10 mg/mL PIC groups. Immediate and aged shear bond strength (SBS) were measured, and failure modes were observed under a stereomicroscope to investigate the impact of different PIC concentrations on the bonding durability of primary tooth dentin. Results: Molecular docking revealed strong binding activity between PIC and type I collagen/MMPs via hydrogen bonds, electrostatic potential, and hydrophobic forces; the FTIR results confirmed hydrogen bond formation. In the dry mass loss test, mass loss rates in the 2.5, 5, and 10 mg/mL PIC groups were significantly lower than that in the control group (P < 0.05), with the 10 mg/mL PIC group showing the most optimized cross-linking effect. Swelling tests indicated that all three PIC concentrations reduced the swelling ratio of the demineralized matrix, effectively improving its mechanical properties. SEM showed that collagen from the 10 mg/mL PIC group retained its natural three-dimensional network post-enzymolysis, contrasting sharply with the disintegrated collagen in the enzymolyzed distilled water group B but resembling the morphology of the non-enzymolyzed distilled water group A. SBS results demonstrated that the 10 mg/mL PIC group exhibited significantly higher bond strengths than the control group in both the immediate and aged tests (P < 0.05); immediate SBS in the 10 mg/mL PIC group was also significantly greater than that in the 2.5 mg/mL PIC group (P < 0.05), while no other intergroup differences were found (P > 0.05). Failure mode analysis indicated predominantly mixed fractures, with the proportion of interfacial fractures decreasing as PIC concentration increased compared with the control group. Conclusion A 10 mg/mL PIC solution can effectively cross-link decalcified dentin matrices in primary teeth, enhancing the anti-enzymatic hydrolytic capacity and mechanical properties during clinical operation, thereby promoting bond strength and interface stability, which promises to improve the long-term durability of resin-dentin bonding.

OBJECTIVE To clarify the current development status of clinical pharmacist training bases and the pharmacist workforce in China， and to provide evidence for standardizing base construction and promoting the high-quality development of hospital pharmacy. METHODS Questionnaires were distributed to all clinical pharmacist training bases for urgently-needed health professionals and clinical pharmacist training bases under the Chinese Hospital Association that had been approved by the end of 2023 to collect data including base profiles and pharmacist staffing conditions. Expert teams carried out field investigations to verify the collected data. Descriptive statistical analyses were conducted on the quantity， type and regional distribution of training bases， and the influencing factors of pharmacist staffing in the bases were analyzed. RESULTS Field surveys were completed covering 297 training bases across 31 provincial-level administrative regions. Among the base hospitals， 87.88% were Grade A tertiary general hospitals， and 65.32% were located in provincial capitals. The eastern region had the largest number of bases （136， accounting for 45.79%）， followed by the western region （79， 26.60%）. Great disparities existed among provinces in terms of base quantity and hospital scale. The median proportion of pharmaceutical technical personnel in base hospitals was 4.05%， and the median number of clinical pharmacists per 100 hospital beds was 0.53. Both indicators reached the highest in the eastern region （0.57， 4.43%） and the lowest in the northeastern region （0.45， 3.01%）. A total of 3 627 full-time clinical pharmacists were employed in all surveyed bases， among whom 83.68% held clinical pharmacist training certificates， 35.43% possessed senior professional titles， and 78.19% had postgraduate or higher educational background. The total annual training capacity of the surveyed bases was 4 291 trainees， with obvious differences in annual training capacity across regions and provinces. Training specialties covered 19 specialized disciplines plus one general discipline， and no province could deliver training for all 20 specialties simultaneously. Multivariate Logistic regression analysis showed that geographic region exerte d a significant impact on the proportion of pharmaceutical technical personnel （≥4%） （ P ＜0.05）， while the approval time of training bases and hospital scale had significant effects on the number of clinical pharmacists per 100 beds （≥0.6） （ P ＜0.05）. CONCLUSIONS China’s clinical pharmacist training system has basically matured and taken initial shape. The distribution of clinical pharmacist training resources is generally consistent with regional population and economic development levels. However， the allocation of pharmaceutical staff and clinical pharmacists has not yet met national standards and clinical service demands.

OBJECTIVE To clarify the current development status of clinical pharmacist training bases and the pharmacist workforce in China， and to provide evidence for standardizing base construction and promoting the high-quality development of hospital pharmacy. METHODS Questionnaires were distributed to all clinical pharmacist training bases for urgently-needed health professionals and clinical pharmacist training bases under the Chinese Hospital Association that had been approved by the end of 2023 to collect data including base profiles and pharmacist staffing conditions. Expert teams carried out field investigations to verify the collected data. Descriptive statistical analyses were conducted on the quantity， type and regional distribution of training bases， and the influencing factors of pharmacist staffing in the bases were analyzed. RESULTS Field surveys were completed covering 297 training bases across 31 provincial-level administrative regions. Among the base hospitals， 87.88% were Grade A tertiary general hospitals， and 65.32% were located in provincial capitals. The eastern region had the largest number of bases （136， accounting for 45.79%）， followed by the western region （79， 26.60%）. Great disparities existed among provinces in terms of base quantity and hospital scale. The median proportion of pharmaceutical technical personnel in base hospitals was 4.05%， and the median number of clinical pharmacists per 100 hospital beds was 0.53. Both indicators reached the highest in the eastern region （0.57， 4.43%） and the lowest in the northeastern region （0.45， 3.01%）. A total of 3 627 full-time clinical pharmacists were employed in all surveyed bases， among whom 83.68% held clinical pharmacist training certificates， 35.43% possessed senior professional titles， and 78.19% had postgraduate or higher educational background. The total annual training capacity of the surveyed bases was 4 291 trainees， with obvious differences in annual training capacity across regions and provinces. Training specialties covered 19 specialized disciplines plus one general discipline， and no province could deliver training for all 20 specialties simultaneously. Multivariate Logistic regression analysis showed that geographic region exerte d a significant impact on the proportion of pharmaceutical technical personnel （≥4%） （ P ＜0.05）， while the approval time of training bases and hospital scale had significant effects on the number of clinical pharmacists per 100 beds （≥0.6） （ P ＜0.05）. CONCLUSIONS China’s clinical pharmacist training system has basically matured and taken initial shape. The distribution of clinical pharmacist training resources is generally consistent with regional population and economic development levels. However， the allocation of pharmaceutical staff and clinical pharmacists has not yet met national standards and clinical service demands.

OBJECTIVE To investigate the current status of quality management in clinical pharmacist training bases in China， and to provide references for the standardized development and improvement of these bases. METHODS A combined approach of questionnaire survey and on-site investigation was adopted， targeting the healthcare highly sought-after talent （clinical pharmacist） training bases in 31 provinces of China as well as the clinical pharmacist training bases affiliated with the Chinese Hospital Association. A training quality management evaluation index system consisting of 25 tertiary indicators was established. Investigations were conducted from two dimensions： structural quality of training and quality management of training processes. Data were statistically analyzed using descriptive statistical methods. RESULTS On-site investigations were completed for 297 clinical pharmacist training bases across the 31 provinces， among which 284 were affiliated with the Chinese Hospital Association and 271 were healthcare highly sought-after talent （clinical pharmacist） training bases. In terms of structural quality， the core indicator compliance rate for hospital-level training systems exceeded 80%， the rate of special fund utilization for designated purposes reached 80.13%， and the overall compliance rate for software and hardware facilities surpassed 88%. A total of 1 348 preceptors were employed across the training bases， among whom those with senior professional titles and full-time specialist clinical pharmacists as lead preceptors accounted for 62.91% and 94.36%， respectively. Regarding process quality， the compliance rate for “establishment of clinical practice teaching groups in accordance with regulations during clinical department rotations” was 85.19%， and 79.80% and 76.09% of the bases were found to implement strict confidentiality in theoretical examinations and meet the required scale of assessment cases， respectively. However， formal documents of corresponding training management regulations were formulated in only 57.91% of the bases， and the completeness and standardization rate of training manual completion was merely 47.47%. In addition， considerable disparities in quality management levels were observed among provinces， with issues in training process quality being particularly prominent. CONCLUSIONS The management system， hardware facilities， and preceptor staffing of clinical pharmacist training bases in China are relatively well-established， yet notable variations in quality management exist among training bases across different provinces.