Objective To investigate the distribution characteristics of Oncomelania hupensis snails in Yunnan Province fol-lowing interruption of schistosomiasis transmission, so as to provide the evidence for assessing the risk of schistosomiasis transmission and scientifically formulating the schistosomiasis surveillance program. Methods According to the requirements of the National Schistosomiasis Surveillance Scheme (2020 Edition), O. hupensis snail surveillance data were collected from 18 schistosomiasis-endemic counties (cities, districts) in Yunnan Province from 2020 to 2024, including area of snail survey, area of snail habitats, area of re-emerging snail habitats, number of frames surveyed, number of frames with O. hupensis snails, number of O. hupensis snails captured, and number of living snails, and the occurrence of frames with snails and mean density of living snails were calculated. Changes in snail status over the 5-year period from 2020 to 2024 and the differences in snail distributions specified by epidemic intensity, environmental type, and vegetation type were analyzed. Results The areas of snail survey increased from 1 727.96 hm² in 2020 to 3 894.45 hm² in 2024 (peak) across 18 schistosomiasis-endemic counties (cities, districts) in Yunnan Province during the period from 2020 through 2024. The areas of snail habitats increased from 70.36 hm² in 2020 to a peak in 2023 (172.04 hm²), followed by a reduction to 132.36 hm² in 2024, and the areas of re-emerging snail habitats increased from 42.71 hm² in 2020 to a peak in 2022 (78.43 hm²), followed by a reduction to 40.21 hm² in 2024. The occurrence of frames with snails and mean density of living snails increased from 1.24% (3 025/244 404) and (0.033 2 ± 0.038 7) snails/0.1 m² in 2020 to peaks at 2.03% (6 231/307 563) and (0.066 9 ± 0.068 4) snails/0.1 m² in 2023, followed by reductions to 1.04% (5 829/559 941) and (0.032 6 ± 0.057 7) snails/0.1 m² in 2024, respectively. There was a significant difference in the occurrence of frames with snails over the 5-year study period (χ² = 1 962.95, P < 0.05), and the occurrence of frames with snails reduced by 48.71% in 2024 relative to in 2023 (χ² = 1 411.05, P < 0.005); however, there was no significant difference in the mean density of living snails over the 5 years (H = 5.310, P > 0.05). There were significant differences in the occurrence of frames with snails (χ² = 481.27, P < 0.05) and mean density of living snails (H = 6.872, P < 0.05) in schistosomiasis-endemic areas with different epidemic intensities. The occurrence of frames with snails (χ² = 25.32 and 38.70, both P values < 0.017) and mean density of living snails (Z = 28.55 and 49.96, both P values < 0.017) were higher in schistosomiasis transmission-interrupted and eliminated areas with snails than in schistosomiasis-eliminated areas without snails, and the occurrence of frames with snails (χ² = 453.54, P < 0.017) and mean density of living snails (Z = −56.97, P < 0.017) were higher in schistosomiasis-eliminated areas with snails than in schistosomiasis transmission-interrupted areas with snails. O. hupensis snails were mainly distributed in paddy fields, dry farmlands and ditches; however, the occurrence of frames with snails (13.40%, 424/3 164) and mean density of living snails [(0.252 8 ± 0.158 7) snails/0.1 m²] were higher in ponds/weirs than in other types of environments (both P values < 0.05). Rice, dry farmland crops and weeds were main vegetations in which O. hupensis snails were distributed, and the occurrence of frames with snails (2.29%, 7 111/310 140) and mean density of living snails [(0.072 3 ± 0.018 9) snails/0.1 m²] were higher in weeds than in other types of environments (both P values < 0.05). Conclusions O. hupensis snails have been effectively controlled in Yunnan Province following implementation of integrated schistosomiasis control measures; however, there are still risk factors for schistosomiasis transmission, including reduced attention to schistosomiasis control and snail re-emergence. Improved control efforts and surveillance system construction and timely identification of risk factors of snail status and timely management are recommended to ensure the achievement of the target of schistosomiasis elimination as scheduled.

BACKGROUND:Curcumin is the main active ingredient of turmeric and has significant medicinal value in anti-tumor,anti-inflammatory,antioxidant and other aspects.However,its poor water solubility,unstable chemical properties and easy decomposition lead to difficulty in extracting curcumin and low extraction yield.Therefore,it is particularly important to optimize the curcumin extraction method.OBJECTIVE:To enhance the extraction yield and utilization value of curcumin and optimize the curcumin extraction process and curcumin nanoparticle preparation process.METHODS:Curcumin was extracted from turmeric by ethanol extraction,ultrasonic extraction,ionic liquid extraction,enzyme extraction,and ionic liquid combined with ultrasonic assisted enzyme extraction.The curcumin extraction yield was detected by high performance liquid chromatography;the best extraction method was determined,and subsequent process optimization experiments were carried out.The curcumin extraction yield was the response value with the type of ionic liquid,reaction temperature,ultrasonic time,liquid-to-solid ratio,ionic liquid concentration,and enzyme-drug mass ratio as parameters.The optimal production process of ionic liquid combined with ultrasonic assisted enzyme extraction was determined by single factor combined response surface experiment.The optimal process for preparing curcumin nanoparticles by ionic crosslinking method was determined by single factor combined response surface experiment with acetic acid concentration,chitosan to sodium tripolyphosphate mass ratio,stirring rate,curcumin mass concentration,sodium tripolyphosphate mass concentration,and chitosan mass concentration as parameters,and drug encapsulation efficiency as response value.Curcumin nanoparticles were prepared under the optimal process,and the particle size,polydispersity index,Zata potential value,drug loading,stability,hemolysis rate,and antioxidant capacity in vivo and in vitro of the nanoparticles were detected.RESULTS AND CONCLUSION:(1)Among the five extraction methods,the curcumin yield of ionic liquid combined with ultrasound-assisted enzyme extraction was the highest,and this method was selected as the curcumin extraction method for subsequent experiments.The results of single factor combined response surface experiment showed that the optimal process for curcumin extraction was:ionic liquid selected 1-hexyl-3-methylimidazolium chloride,reaction temperature 55 ℃,liquid-to-solid ratio 40 mL/g,ultrasound time 57 minutes,ionic liquid concentration 57％,enzyme-drug mass ratio 3.5:10,and the obtained turmeric extraction yield was 3.10％.The optimal preparation process of curcumin nanoparticles was:glacial acetic acid concentration 0.5％,chitosan and sodium tripolyphosphate mass ratio 5.0:1,stirring speed 150 r/min,curcumin mass concentration 2.23 mg/mL,sodium tripolyphosphate mass concentration 1.45 mg/mL,chitosan mass concentration 3.63 mg/mL,and the obtained drug encapsulation efficiency was 90.61％.(2)The drug loading of curcumin nanoparticles was(14.49±0.23)％,the average particle size was(76.95±1.65)nm,the polydispersity coefficient was 0.15±0.02,and the Zata potential value was(32.37±1.46)mV.The curcumin nanoparticles had good stability and blood compatibility,did not induce hemolysis,and had stronger antioxidant capacity in vivo and in vitro than free curcumin.(3)The results show that the process optimization not only solves the problems of low extraction yield,poor solubility,and low bioavailability of curcumin,but also enhances its antioxidant activity in vivo and in vitro.

Objective: To investigate the effect of different surface treatment protocols on the surface properties and immediate shear bond strength (SBS) between 3D-printed zirconia and resin cement to provide a reference for clinical practice. Methods: Disc-shaped zirconia specimens (Ø 14 mm× 1.2 mm) with two different surface designs were fabricated using 3D printing technology: a smooth surface (Group S) and microporous surface (Group M), with 40 specimens in each group. Each group was further randomly divided into four subgroups according to surface treatment: untreated (Subgroup U), alumina sandblasting (Subgroup ST), alumina sandblasting + Z-Prime ceramic primer (Subgroup ZP), and alumina sandblasting + Monobond N ceramic primer (Subgroup MN). The surface morphology was examined, roughness was measured, and wettability was evaluated via contact-angle testing. Composite resin cylinders (Ø 3.5 mm× 2.0 mm) were bonded to the zirconia surfaces with resin cement. Immediate SBS was determined by shear testing, and failure modes were analyzed. Results: Scanning electron microscopy revealed clear micro-grooves (2-5 μm wide) in Subgroup S-U and micropores (approximately 400 μm in diameter) in Subgroup M-U. After sandblasting, the micro-grooves in Subgroup S-ST were partially destroyed with some micro-cracks, while the microporous structure in Subgroup M-ST remained clear. Compared with Subgroups S-U and M-U, sandblasted zirconia specimens (Subgroups S-ST, S-ZP, S-MN, M-ST, M-ZP, M-MN) showed significantly increased roughness and decreased contact angles. Different surface treatments significantly affected SBS between 3D-printed zirconia and resin. Sandblasted groups (Subgroups S-ST and M-ST) had significantly higher SBS than untreated groups (Subgroups S-U and M-U). The application of ceramic primers after sandblasting (Subgroups S-ZP, S-MN, M-ZP, M-MN) further increased SBS; however, there was no statistically significant difference in SBS between the two primers used after sandblasting (Subgroup S-ZP vs. S-MN, Subgroup M-ZP vs. M-MN). Under the same surface treatment, microporous surface groups (Subgroups M-U, M-ST, M-MN, M-ZP) all exhibited significantly higher SBS than smooth surface groups (Subgroups S-U, S-ST, S-MN, S-ZP). Conclusion Fabricating a microporous surface using 3D printing technology can improve resin bonding effectiveness. Sandblasting combined with a ceramic primer yields the highest immediate SBS.

Gorham-Stout disease(GSD) is a rare osteolytic disorder characterized by spontaneous and progressive osteolysis, along with abnormal angiogenesis and lymphangiogenesis, with no new bone formation. We present a case of a 15-year-old female admitted due to " recurrent right leg pain for 5 years, 11 months after undergoing right femoral fracture surgery". Through comprehensive integration of the patient's clinical phenotype, laboratory tests, imaging findings, pathological examinations, and molecular biological test results, GSD was considered highly likely. A multidisciplinary treatment approach was conducted, including a combination of zoledronic acid and sirolimus to inhibit osteolysis, along with rehabilitation training and orthopedic intervention, providing a personalized and comprehensive treatment strategy.

Objective To analyze the distribution status of the end digits of standardized blood pressure measurement recordings in the clinic and the effectiveness of standardized blood pressure measurement for community hypertension screening. Methods The first visit blood pressure measurement data from the Community Health Service Center in Jing'an District, Shanghai from June 2023 to May 2024 were collected and analyzed. According to different measurement methods, the data were divided into two groups: standardized blood pressure measurement and conventional blood pressure measurement. SPSS 19.0 software was used for data analysis. The differences in the distribution balance of the end digits of blood pressure values and the detection rate of blood pressure elevation between the two different groups were analyzed. Results The frequency range of the end digits of blood pressure recorded values in the standardized pressure measurement group was 9.42% to 10.83%, and the detection rate of elevated blood pressure was 24.89%. The conventional pressure measurement group had a preference of the end digit ^"0^", and the detection rate of elevated blood pressure was only 2.12%. The results of multiple logistic regression analysis showed that gender, age, season, and different blood pressure measurement modes were all influencing factors for the detection rate of elevated blood pressure. Conclusion The standardized blood pressure measurement mode in the clinic is suitable for community hypertension screening and pressure measurement, with higher data quality than the conventional pressure measurement mode.

ObjectiveThis paper aims to investigate the material basis of the anti-inflammatory efficacy and mechanism of action of Bushen Tongdu prescription （BSTDP）. MethodsThe chemical components of BSTDP and its blood-absorbed components in vivo were systematically identified by using ultra-performance liquid chromatography-linear ion trap-electrostatic field orbitrap high-resolution mass spectrometry （UPLC-LIT-Orbitrap-MS）. Network pharmacology was employed to screen blood-absorbed bioactive components and potential targets of this formula. A protein-protein interaction （PPI） network of core targets was constructed to conduct enrichment analysis. Molecular docking was further utilized to verify the binding affinity between key components and targets. The inflammatory model was established and verified in vivo by using a transgenic zebrafish Tg （mpx： GFP）. At three days post-fertilization （3 dpf）， larvae of zebrafish were randomly assigned to blank group， model group， positive drug dexamethasone acetate group （75 μmol·L^-1）， and BSTDP groups with low， medium， and high doses （500， 1 000， and 2 000 mg·L^-1）. The distribution and quantity of neutrophils in the yolk sac region were observed under a fluorescence microscope. The mRNA expression levels of key genes in the toll-like receptor 4 （TLR4）/myeloid differentiation factor 88 （MyD88）/nuclear factor kappa-B （NF-κB） signaling pathway and inflammatory factors including interleukin （IL）-1β， IL-6， and tumor necrosis factor-α （TNF-α） were detected by Real-time quantitative polymerase chain reaction （Real-time PCR）. ResultsA total of 120 chemical components were identified in BSTDP， among which 26 original components were confirmed by using serum pharmacochemical methods. A total of 227 common targets linking rheumatoid arthritis （RA） and the blood-absorbed components were screened by network pharmacology. It is suggested that pseudobrucine， vomicine， sinapine， rehmannioside， cinnamyl alcohol glycoside， and methylephedrine exert anti-inflammatory effects by acting on core targets including protein kinase B1 （Akt1）， signal transducer and activator of transcription 3 （STAT3）， tumor necrosis factor （TNF）， TLR4， mitogen-activated protein kinase 14 （MAPK14）， and phosphatidylinositol-4，5-bisphosphate 3-kinase catalytic subunit α （PIK3CA）， thereby modulating multiple signaling pathways such as TLR4 and NF-κB. In vivo verification in zebrafish demonstrates that the maximum tolerable concentration of Bushen Tongdu Formula is 2 000 mg·L^-1. Compared to those in the blank group， zebrafish in the model group showed a significantly higher number of neutrophils in the yolk sac region （P<0.01） and rising mRNA levels of TLR4， MyD88， NF-κB， TNF-α， IL-6， and IL-1β （P<0.01）. Compared to that in the model group， the number of neutrophils was significantly reduced in BSTDP groups with medium and high doses， as well as the dexamethasone acetate group （P<0.05， P<0.01）. There was no statistically significant difference in the low dose group. The mRNA expression levels of TLR4， MyD88， NF-κB， TNF-α， IL-6， and IL-1β were significantly down-regulated （P<0.05， P<0.01）. ConclusionThis paper identifies the material basis of the efficacy of BSTDP， demonstrating that the formula can exert an anti-inflammatory effect through the TLR4/MyD88/NF-κB signaling pathway. The results provide scientific experimental evidence for its further clinical application.

AIM:To investigate the effects of high-altitude hypoxic exposure on retinal injury and the associated changes in oxidative stress-related indicators in rats. METHODS: Twenty-four healthy male Sprague-Dawley(SD)rats were randomly divided into a plain group and a high-altitude group, with 12 rats(24 eyes)in each group. Rats in the plain group were housed under normoxic conditions in an SPF-grade animal facility, whereas rats in the high-altitude group were placed in a special environmental chamber simulating an altitude of 6 000 m for 7 d. Optical coherence tomography(OCT)was used to assess retinal layer architecture and quantify retinal thickness. Hematoxylin-eosin(HE)staining was performed to observe retinal histopathological changes. Immunofluorescence(IF)was used to detect the expression of hypoxia-inducible factor-1α(HIF-1α)in retinal tissue. Transmission electron microscopy(TEM)was applied to examine the ultrastructure of retinal ganglion cells(RGCs). Enzyme-linked immunosorbent assay(ELISA)was used to measure the levels of malondialdehyde(MDA), total superoxide dismutase(T-SOD), and reduced glutathione(GSH)in retinal tissue. In addition, intracellular reactive oxygen species(ROS)levels in retinal tissue were assessed using the 2',7'-dichlorodihydrofluorescein diacetate(DCFH-DA)fluorescent probe. RESULTS: OCT examination revealed disorganized retinal architecture in the high-altitude group, with increased inner and middle ring thickness and decreased outer ring thickness compared with the plain group(all P<0.05). HE staining showed varying degrees of retinal layer damage, blurred layer boundaries, loosely arranged RGCs, and partial cellular necrosis in the high-altitude group. IF analysis demonstrated significantly increased HIF-1α expression in the inner nuclear layer of the high-altitude group(P<0.01). TEM revealed mitochondrial swelling, disrupted cristae, and reduced matrix electron density in RGCs of the high-altitude group. ELISA and fluorescence probe assays showed significantly elevated MDA levels and ROS fluorescence intensity, accompanied by decreased T-SOD and GSH levels in the retinal tissue of the high-altitude group(all P<0.05). CONCLUSION: Exposure to a high-altitude hypoxic environment induces marked morphological and ultrastructural damage in the rat retina and significantly enhances oxidative stress, suggesting that oxidative stress may play a critical role in retinal injury induced by high-altitude hypoxia.

ObjectiveThis paper aims to investigate the material basis of the anti-inflammatory efficacy and mechanism of action of Bushen Tongdu prescription （BSTDP）. MethodsThe chemical components of BSTDP and its blood-absorbed components in vivo were systematically identified by using ultra-performance liquid chromatography-linear ion trap-electrostatic field orbitrap high-resolution mass spectrometry （UPLC-LIT-Orbitrap-MS）. Network pharmacology was employed to screen blood-absorbed bioactive components and potential targets of this formula. A protein-protein interaction （PPI） network of core targets was constructed to conduct enrichment analysis. Molecular docking was further utilized to verify the binding affinity between key components and targets. The inflammatory model was established and verified in vivo by using a transgenic zebrafish Tg （mpx： GFP）. At three days post-fertilization （3 dpf）， larvae of zebrafish were randomly assigned to blank group， model group， positive drug dexamethasone acetate group （75 μmol·L^-1）， and BSTDP groups with low， medium， and high doses （500， 1 000， and 2 000 mg·L^-1）. The distribution and quantity of neutrophils in the yolk sac region were observed under a fluorescence microscope. The mRNA expression levels of key genes in the toll-like receptor 4 （TLR4）/myeloid differentiation factor 88 （MyD88）/nuclear factor kappa-B （NF-κB） signaling pathway and inflammatory factors including interleukin （IL）-1β， IL-6， and tumor necrosis factor-α （TNF-α） were detected by Real-time quantitative polymerase chain reaction （Real-time PCR）. ResultsA total of 120 chemical components were identified in BSTDP， among which 26 original components were confirmed by using serum pharmacochemical methods. A total of 227 common targets linking rheumatoid arthritis （RA） and the blood-absorbed components were screened by network pharmacology. It is suggested that pseudobrucine， vomicine， sinapine， rehmannioside， cinnamyl alcohol glycoside， and methylephedrine exert anti-inflammatory effects by acting on core targets including protein kinase B1 （Akt1）， signal transducer and activator of transcription 3 （STAT3）， tumor necrosis factor （TNF）， TLR4， mitogen-activated protein kinase 14 （MAPK14）， and phosphatidylinositol-4，5-bisphosphate 3-kinase catalytic subunit α （PIK3CA）， thereby modulating multiple signaling pathways such as TLR4 and NF-κB. In vivo verification in zebrafish demonstrates that the maximum tolerable concentration of Bushen Tongdu Formula is 2 000 mg·L^-1. Compared to those in the blank group， zebrafish in the model group showed a significantly higher number of neutrophils in the yolk sac region （P<0.01） and rising mRNA levels of TLR4， MyD88， NF-κB， TNF-α， IL-6， and IL-1β （P<0.01）. Compared to that in the model group， the number of neutrophils was significantly reduced in BSTDP groups with medium and high doses， as well as the dexamethasone acetate group （P<0.05， P<0.01）. There was no statistically significant difference in the low dose group. The mRNA expression levels of TLR4， MyD88， NF-κB， TNF-α， IL-6， and IL-1β were significantly down-regulated （P<0.05， P<0.01）. ConclusionThis paper identifies the material basis of the efficacy of BSTDP， demonstrating that the formula can exert an anti-inflammatory effect through the TLR4/MyD88/NF-κB signaling pathway. The results provide scientific experimental evidence for its further clinical application.

arcopenia is a systemic skeletal muscle disorder characterized by a decrease in skeletal muscle mass and progressive decline in function， with multiple signaling pathways involved in its occurrence and development. Among them， the AMP-activated protein kinase （AMPK） signaling pathway， as a key pathway regulating cellular energy homeostasis， plays an important role in the regulation of skeletal muscle metabolism and functional maintenance by improving abnormalities in glucose and lipid metabolism， balancing skeletal muscle protein synthesis and degradation， improving mitochondrial function， promoting autophagy， and inhibiting inflammatory responses and oxidative stress. This article reviews the research progress on how various traditional Chinese medicine （TCM） monomers， including polyphenols， flavonoids， and terpenoids； various traditional Chinese medicine extracts， such as those from Lycium barbarum ， Asini Corii Colla， and Panax quinquefolium ， and TCM compounds， such as Guiqi zhuangjin decoction， Jianpi qiangji granules， and Qigu capsules， intervene in sarcopenia by regulating the AMPK signaling pathway to promote muscle protein synthesis， inhibit protein degradation， improve mitochondrial function， and alleviate inflammation and oxidative stress. Additionally， their molecular mechanisms are explored. The aim is to deeply elucidate the basis of TCM in the prevention and treatment of sarcopenia and to provide theoretical support for the development of related innovative drugs.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.