BACKGROUND:Cervical disc herniation can cause pain in the neck and shoulder area,as well as radiating pain in the upper limbs.The incidence rate is increasing year by year and tends to affect younger individuals.Fully understanding the biomechanical characteristics of the cervical spine in adolescents is of great significance for preventing and delaying the onset of cervical disc herniation in this age group. OBJECTIVE:To reconstruct cervical spine models for both healthy adolescents and adolescent patients with cervical disc herniation utilizing finite element analysis techniques,to analyze the motion range of the C1-T1 cervical vertebrae as well as the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and the cartilage of the small joints. METHODS:A normal adolescent's cervical spine and an adolescent patient with cervical disc herniation were selected in this study.The continuous scan cervical spine CT raw image data were imported into Mimics 21.0 in DICOM format.The C1-T1 vertebrae were reconstructed separately.Subsequently,the established models were imported into the 3-Matic software for disc reconstruction.The perfected models were then imported into Hypermesh software for meshing of the vertebrae,nucleus pulposus,annulus fibrosus,and ligaments,creating valid geometric models.After assigning material properties,the final models were imported into ABAQUS software to observe the joint motion range of the C1-C7 cervical vertebrae segments under different conditions,and to analyze the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and small joint cartilage of each cervical spine segment. RESULTS AND CONCLUSION:(1)In six different conditions,the joint motion range of the C1 vertebra in the cervical spine models of both normal adolescent and adolescent patient with cervical disc herniation was higher than that of the other vertebrae.Additionally,the joint motion range of each cervical spine segment in normal adolescent was greater than that in adolescent patient with cervical disc herniation.(2)In the cervical spine model of normal adolescent,the maximum stress values in the annulus fibrosus and nucleus pulposus were found on the left side during C2-3 flexion conditions(0.43 MPa and 0.17 MPa,respectively).In the cervical spine model of adolescent patient with cervical disc herniation,the maximum stress values were found on the left side during C7-T1 flexion conditions(0.54 MPa and 0.18 MPa,respectively).(3)In the cervical spine model of normal adolescent,the maximum stress value on the endplate was found on the left side of the upper endplate of C3 during flexion conditions(1.46 MPa).In the model of adolescent patient with cervical disc herniation,the maximum stress value on the endplate was found on the left side of the lower endplate of C7 during flexion conditions(1.32 MPa).(4)In the cervical spine model of normal adolescent,the maximum stress value in the small joint cartilage was found in the C2-3 left rotation conditions(0.98 MPa).In adolescent patient with cervical disc herniation,the stress in the small joint cartilage significantly increased under different conditions,especially in C1-2,with the maximum stress found during left flexion(3.50 MPa).(5)It is concluded that compared to normal adolescent,adolescent patient with cervical disc herniation exhibits altered cervical curvature and a decrease in overall joint motion range in the cervical spine.In adolescent with cervical disc herniation,there is a significant increase in stress on the annulus fibrosus,nucleus pulposus,and endplates in the C7-T1 segment.The stress on the left articular cartilage of the C1-2 is notable.Abnormal cervical curvature may be the primary factor causing these stress changes.

BACKGROUND: Children's respiratory health demonstrates particular sensitivity to air pollution. Existing evidence investigating the association between short-term ozone (O₃) exposure and childhood pneumonia remains insufficient and inconsistent, especially in low- and middle-income countries (LMICs). METHOD: To provide more reliable and persuasive evidence, we implemented a multi-city, time-stratified case-crossover design with a large sample size, using data from seven representative children's hospitals across major geographical regions in China. To avoid the impact of the COVID-19 pandemic, individual-level medical records of inpatient children under 6 years of age diagnosed with pneumonia during 2016-2019 were collected. Conditional logistic regression models were fitted for each city, and city-specific estimates were pooled through a meta-analysis using a random-effects model. RESULTS: In total, the study included 137,470 pediatric pneumonia hospital admissions. The highest pooled estimate for O₃ occurred at lag0-1, with a 10 µg/m³ increase in O₃ associated with a 1.57% (95% CI: 0.67%-2.48%) higher risk of pediatric pneumonia hospital admissions. Stratified analyses indicated that the effects of O₃ were robust across different sexes, age groups, and admission seasons. We also observed a statistically significant increase in risk associated with O₃ concentrations exceeding the World Health Organization Air Quality Guidelines (WHO-AQGs). CONCLUSIONS This study revealed a significant positive association between O₃ and pediatric pneumonia hospital admissions. Our findings substantially strengthen the evidence base for the adverse health impacts of O₃, underscoring the importance of O₃ pollution control and management in reducing the public health burden of pediatric pneumonia.
Humans ; Ozone/analysis* ; China/epidemiology* ; Pneumonia/chemically induced* ; Child, Preschool ; Male ; Female ; Infant ; Cross-Over Studies ; Air Pollutants/analysis* ; Hospitalization/statistics & numerical data* ; Child ; Cities/epidemiology* ; Air Pollution/adverse effects* ; Infant, Newborn ; Environmental Exposure/adverse effects*

OBJECTIVE: This study aimed to investigate the prevalence of HIV pretreatment drug resistance (PDR) and the transmission clusters associated with PDR-related mutations in newly diagnosed, treatment-naive patients between 2020 and 2023 in Dehong prefecture, Yunnan province, China. METHODS: Demographic information and plasma samples were collected from study participants. PDR was assessed using the Stanford HIV Drug Resistance Database. The Tamura-Nei 93 model within HIV-TRACE was employed to compute pairwise matches with a genetic distance of 0.015 substitutions per site. RESULTS: Among 948 treatment-naive individuals with eligible sequences, 36 HIV subtypes were identified, with unique recombinant forms (URFs) being the most prevalent (18.8%, 178/948). The overall prevalence of PDR was 12.4% (118/948), and resistance to non-nucleotide reverse transcriptase inhibitors (NNRTIs), nucleotide reverse transcriptase inhibitors (NRTIs), and protease inhibitors (PIs) was 10.7%, 1.3%, and 1.6%, respectively. A total of 91 clusters were identified, among which eight showed evidence of PDR strain transmission. The largest PDR-associated cluster consisted of six CRF01_AE drug-resistant strains carrying K103N and V179T mutations; five of these individuals had initial CD4+ cell counts < 200 cells/μL. CONCLUSION The distribution of HIV subtypes in Dehong is diverse and complex. PDR was moderately prevalent (12.4%) between 2020 and 2023. Evidence of transmission of CRF01_AE strains carrying K103N and V179T mutations was found. Routine surveillance of PDR and the strengthening of control measures are essential to limit the spread of drug-resistance HIV strains.
Humans ; HIV Infections/virology* ; China/epidemiology* ; Drug Resistance, Viral ; Male ; Adult ; Female ; Middle Aged ; HIV-1/genetics* ; Anti-HIV Agents/therapeutic use* ; Myanmar/epidemiology* ; Young Adult ; Prevalence ; Adolescent ; Mutation

Objective:To investigate the clinical and genetic characteristics of a male carrier of exceptional complex chromo-some rearrangement(CCR)and the outcome of preimplantation genetic testing for chromosomal structural rearrangement(PGT-SR).Methods:Using the modified high resolution G banding technique and whole-genome low-coverage sequencing(WGLCS),we analyzed the cellular karyotype and molecular karyotype of a male carrier of CCR,performed an analysis of the single-sperm chromosome copy number and conducted PGT-SR for the patient by next-generation sequencing(NGS).In addition,we reviewed the literature on repor-ted male carriers of CCRs and summarized their normal/balanced sperm ratios and PGT-SR outcomes.Results:The karyotype of the patient was 46,XY,der(5)inv(5)(q14.3q23.2)t(5;14;11)(q23.2;q31.1;q21),der(11)t(5;14;11);der(14)t(5;14;11),with the translocation breakpoints located in the intergenic region.Single-sperm sequencing revealed 20.0%(7/35)of normal haploids in the male's spermatozoa,and the results PGT-SR showed a proportion of 25.0%(4/16)of normal/balanced embryos.After thawing and transferring of 2 euploid blastocysts,a healthy male infant was successfully delivered.Conclusion:The proportion of normal hap-loids in the spermatozoa of male CCR carriers may be higher than theoretically predicted,and PGT-SR can effectively improve the preg-nancy outcome in male CCR carriers and provide valuable data for genetic counseling.

Objective:To explore potential predictors of refractory Mycoplasma pneumoniae pneumonia (RMPP) in early stage. Methods:The prospective multicenter study was conducted in Zhejiang, China from May 1 st, 2019 to January 31 st, 2020. A total of 1 428 patients with fever >48 hours to <120 hours were studied. Their clinical data and oral pharyngeal swab samples were collected; Mycoplasma pneumoniae DNA in pharyngeal swab specimens was detected. Patients with positive Mycoplasma pneumoniae DNA results underwent a series of tests, including chest X-ray, complete blood count, C-reactive protein, lactate dehydrogenase (LDH), and procalcitonin. According to the occurrence of RMPP, the patients were divided into two groups, RMPP group and general Mycoplasma pneumoniae pneumonia (GMPP) group. Measurement data between the 2 groups were compared using Mann-Whitney U test. Logistic regression analyses were used to examine the associations between clinical data and RMPP. Receiver operating characteristic (ROC) curves were used to analyse the power of the markers for predicting RMPP. Results:A total of 1 428 patients finished the study, with 801 boys and 627 girls, aged 4.3 (2.7, 6.3) years. Mycoplasma pneumoniae DNA was positive in 534 cases (37.4%), of whom 446 cases (83.5%) were diagnosed with Mycoplasma pneumoniae pneumonia, including 251 boys and 195 girls, aged 5.2 (3.3, 6.9) years. Macrolides-resistant variation was positive in 410 cases (91.9%). Fifty-five cases were with RMPP, 391 cases with GMPP. The peak body temperature before the first visit and LDH levels in RMPP patients were higher than that in GMPP patients (39.6 (39.1, 40.0) vs. 39.2 (38.9, 39.7) ℃, 333 (279, 392) vs. 311 (259, 359) U/L, both P<0.05). Logistic regression showed the prediction probability π=exp (-29.7+0.667×Peak body temperature (℃)+0.004×LDH (U/L))/(1+exp (-29.7+0.667×Peak body temperature (℃)+0.004 × LDH (U/L))), the cut-off value to predict RMPP was 0.12, with a consensus of probability forecast of 0.89, sensitivity of 0.89, and specificity of 0.67; and the area under ROC curve was 0.682 (95% CI 0.593-0.771, P<0.01). Conclusion:In MPP patients with fever over 48 to <120 hours, a prediction probability π of RMPP can be calculated based on the peak body temperature and LDH level before the first visit, which can facilitate early identification of RMPP.

Most chemical medicines have polymorphs. The difference of medicine polymorphs in physicochemical properties directly affects the stability, efficacy, and safety of solid medicine products. Polymorphs is incomparably important to pharmaceutical chemistry, manufacturing, and control. Meantime polymorphs is a key factor for the quality of high-end drug and formulations. Polymorph prediction technology can effectively guide screening of trial experiments, and reduce the risk of missing stable crystal form in the traditional experiment. Polymorph prediction technology was firstly based on theoretical calculations such as quantum mechanics and computational chemistry, and then was developed by the key technology of machine learning using the artificial intelligence. Nowadays, the popular trend is to combine the advantages of theoretical calculation and machine learning to jointly predict crystal structure. Recently, predicting medicine polymorphs has still been a challenging problem. It is expected to learn from and integrate existing technologies to predict medicine polymorphs more accurately and efficiently.

Objective To study the microscopic structure and morphological characteristics of Zebrafish eyeball and retina at different developmental stages, and to lay a foundation for visual research model. Methods Select eight groups of zebrafish at different ages, with six fish in each group, 48 fish in total. Optical microscopy and transmission electron microscopy were used to observe the eyeball structure of Zebrafish at different developmental stages, and the thickness of retinal each layer was measured to analyze the temporal and spatial development pattern. The morphological characteristics of various cells in the retina and the way of nerve connection were observed from the microscopic and ultrastructural aspects, especially the structural differences between rod cells and cone cells. Results The retina of Zebrafish can be divided into ten layers including retinal pigment epithelial layer, rod cells and cone cells layer, outer limiting membrane, outer nuclear layer, outer plexiform layer, inner nuclear layer, inner plexiform layer, ganglion cell layer, nerve fiber layer, inner limiting membrane. Rod cells had a smaller nucleus and a higher electron density than cone cells. Photoreceptor terminals were neatly arranged in the outer plexiform layer, forming neural connections with horizontal cells and bipolar cells, and several synaptic ribbons are clearly visible within them. In Zebrafish retina, ganglion cell layer and inner plexiform layer are the earliest developed. With the growth and development of Zebrafish, the thickness of rod cells and cone cells layer and retinal pigment epithelial layer gradually increases, and the retinal structure was basically developed in about 10 weeks. Conclusion The retinal structure of Zebrafish is typical, with obvious stratification and highly differentiated nerve cells. There are abundant neural connections in the outer plexiform layer. The ocular development characteristics of Zebrafish are similar to those of most mammals.

After entering the body from the drug delivery site, antitumor nanomedicines need to cross a series of physiopathological barriers to reach the target site of action to effectively exert antitumor therapeutic effects. The ligand modification strategy is a classic method to enhance the efficiency of nanomedicine delivery in vivo, but the contradiction between the single ligand modification strategy, which is characterized by unity and stage, and the in vivo delivery process, which is characterized by versatility and whole-process characteristics, determines that nanomedicines modified by a single ligand alone cannot satisfy the target efficacy requirements. Therefore, the use of multiligand combinatorial modification strategies by virtue of nanomedicine surface area advantages is key to advancing the next generation of smart nanomedicines. In this paper, on the basis of summarizing and classifying the commonly used functional ligands for in vivo delivery, the advantages and research progress of multiligand combination modification of antitumor nanomedicines are discussed with special focus, and the multiligand combination modification is classified as synergistic and complementary according to the combination of the ligands, which is of great significance to ensure that antitumor nanomedicines can overcome the multiple physiopathological barriers to achieve precise delivery.

Rare diseases still lack effective treatments, and the development of drugs for rare diseases (known as orphan drugs) is an urgent medical problem. As natural active ingredients in living organisms, some biomacromolecule drugs have good biocompatibility, low immunogenicity, and high targeting. They have become one of the most promising fields in drug research and development in the 21st century. However, there are still many obstacles in terms of in vivo delivery. In view of the unique advantages of nanocarriers prepared from polymers, lipids, organic biomimetic and inorganic materials in drug delivery, researchers are committed to building an efficient delivery system with versatility and synergy to solve the bottleneck issues in treating rare diseases with biomacromolecule drugs. Therefore, this article reviews the research progress of nanocarrier delivering proteins, peptides and nucleic acids in the field of rare disease treatment in the past ten years, which provides ideas for researches on biomacromolecule drug nanosystems in the field of treatment of rare diseases.

BACKGROUND:Ankylosing spondylitis is a progressive inflammation of spinal stiffness deformity caused by tissue ossification and fibrosis.The posture of ankylosing spondylitis patients is abnormal and their activities are limited that minor injuries can lead to thoracolumbar fractures.Traditional medical image observation limits doctors'preoperative decision planning and postoperative disease prevention for ankylosing spondylitis treatment. OBJECTIVE:Based on the spinal model of ankylosing spondylitis patients before and after posterior spinal cancellous ossification osteotomy("Y"osteotomy for short),to explore the biomechanical changes of"Y"osteotomy and fixation in the treatment of ankylosing spondylitis. METHODS:Based on the preoperative and postoperative CT images of an ankylosing spondylitis patient who went to the Second Affiliated Hospital of Inner Mongolia Medical University,a three-dimensional spine model(T11-S1)before and after"Y"osteotomy(L3 osteotomy)was reconstructed in Mimics 19.0 software.A 7.5 Nm torque was applied to the top of T11 vertebral body to simulate the movement of the spine under six conditions:flexion,extension,left bending,right bending,left rotation and right rotation.Finally,the range of motion of each vertebral body,the stress of each intervertebral disc,and the stress of the screw rod system were simulated. RESULTS AND CONCLUSION:(1)After"Y"type osteotomy and posterior fixation,the range of motion of all vertebrae in the spine decreased,and the loss rate of upper vertebrae was large(L1:77.95%).(2)The maximum stress of the spinal intervertebral disc before operation occurred at the L1-L2 segment(0.55 MPa),and the maximum stress of the spinal intervertebral disc after operation occurred at the T11-T12 segment(0.50 MPa),and the stress of intervertebral disc below T12 was far less than that before operation.(3)The maximum stress of the screw rod system(166.67 MPa)occurred in the upper and middle segments of the rod body and the root of the pedicle screw.(4)In conclusion,the"Y"type posterior fixation operation enhances the stability of the spine and reduces the range of motion of the spine.The vertebral body decompression of the fixed segment is great and the stress-shielding phenomenon of the lower vertebral body is significant.The stiffness of the rod body and the stress concentration area of the pedicle screw should be strengthened to avoid the fracture of the rod caused by stress fatigue.