AIM:To investigate the current status and influencing factors of knowledge-attitude-practice in myopia prevention and control among children and adolescents in Ningbo City, thereby providing a scientific basis for formulating targeted prevention strategies.METHODS: Children and adolescents aged 6-12 years old were selected from the medical-school collaborative myopia prevention network in Ningbo City between August 2024 and May 2025 using stratified cluster sampling. Information on myopia prevention knowledge(15 items)and practice(9 items)was collected through questionnaire surveys. Logistic regression models were used to analyze factors influencing myopia occurrence in children and adolescents.RESULTS: A total of 664 children and adolescents aged 6-12 years were enrolled in this study. Participants were divided by age into three groups: 6-7 years old(n=221), 8-9 years old(n=221), and 10-12 years old(n=222). Of the 664 questionnaires distributed, 637 valid questionnaires were returned(201 from the 6-7 age group, 235 from the 8-9 age group, and 201 from the 10-12 age group), yielding an effective response rate of 95.9%. Based on myopia screening results, the non-myopic group comprised 203 participants(31.9%), including 100 males and 103 females, with a mean age of 8.82±1.98 years old. The myopic group comprised 434 participants(68.1%), including 213 males and 221 females, with a mean age of 9.10±1.95 years old. The myopia prevalence rates in the 6-7, 8-9, and 10-12 age groups were 37.8%(76/201), 71.9%(169/235), and 94.0%(189/201), respectively(P<0.001). Regarding the knowledge and practice of myopia prevention, the overall awareness rate in the non-myopic group(59.7%±9.7%)was significantly higher than that in the myopic group(48.7%±8.5%; P<0.001). Additionally, the non-myopic group scored higher on the key practice of “regular eye examinations”(4.27±0.96)compared to the myopic group(4.10±1.05; P<0.05). Logistic regression analysis indicated that age was the primary risk factor for myopia occurrence.CONCLUSION: Age is the dominant factor in the onset of myopia, and there is a phenomenon of “knowledge-practice gap”; the traditional health education model has limitations, and a precise prevention and control system based on developmental patterns should be established.

A 51-year-old male presented with nasal obstruction, followed by progressive hearing loss and blurred vision. Imaging identified space-occupying lesions in the paranasal sinuses, orbits, and paraspinal regions, while laboratory tests confirmed positive anti-proteinase 3 anti-neutrophil cytoplasmic antibody(PR3- ANCA) immunoglobulin G (IgG)and markedly elevated serum IgG4. Despite treatment with corticosteroids, immunosuppressants, and radiotherapy, the patient exhibited steroid dependency with relentless disease progression. Following multidisciplinary consultation, a diagnosis of inflammatory myofibroblastic tumor (IMT) coexisting with ANCA- associated vasculitis (AAV) was favored, though IgG4-related disease remained a critical differential. Ultimately, profound immunosuppression precipitated a severe herpesvirus infection, leading to disseminated intravascular coagulation and multiple organ dysfunction syndrome. This case underscores the rarity and diagnostic complexity of concurrent IMT and AAV, highlights the therapeutic dilemma of balancing primary disease control against fatal opportunistic infections, and emphasizes the critical role of multidisciplinary collaboration in the diagnosis and treatment of complex diseases.

The manufacturing process is crucial for ensuring the safety and efficacy of traditional Chinese medicine(TCM) preparations. Using advanced technologies, innovative methods, and new equipment tailored for TCM to enhance the quality control of TCM preparations in the manufacturing process helps to ensure the product quality and foster high-quality development of the TCM industry. Upon current technical requirements, such as Guideline for Studies on Pharmaceutical Changes in Marketed Traditional Chinese Medicine Preparations(Trial) and Guideline for Study on Quality Control in Manufacturing Process of Oral Traditional Chinese Medicine Preparations(Trial), this paper analyzes the characteristics and current development of quality control in the manufacturing process of TCM preparations. It also discusses the significant roles that quality control in manufacturing process plays in ensuring the quality consistency and in the evaluation and decision-making of changes in marketed TCM preparations. Furthermore, to benefit the high-quality development of the TCM industry, this paper offers recommendations for improving quality control of TCM preparations in the manufacturing process and implementing new technologies and methods.
Quality Control ; Drugs, Chinese Herbal/chemistry* ; Medicine, Chinese Traditional/standards* ; Decision Making ; Humans

Medical institutions, with their clinical practice foundation and abundant human use experience data, have become important carriers for the inheritance and innovation of traditional Chinese medicine(TCM) and the "cradles" of the preparation of new TCM. To effectively promote the transformation of new TCM originating from the TCM clinical practice in medical institutions and establish an effective evaluation index system for the transformation of new TCM conforming to the characteristics of TCM, consensus experts adopted the literature research, questionnaire survey, Delphi method, etc. By focusing on the policy and technical evaluation of new TCM originating from the TCM clinical practice in medical institutions, a comprehensive evaluation from the dimensions of drug safety, efficacy, feasibility, and characteristic advantages was conducted, thus forming a comprehensive evaluation system with four primary indicators and 37 secondary indicators. The expert consensus reached aims to encourage medical institutions at all levels to continuously improve the high-quality research and development and transformation of new TCM originating from the TCM clinical practice in medical institutions and targeted at clinical needs, so as to provide a decision-making basis for the preparation, selection, cultivation, and transformation of new TCM for medical institutions, improve the development efficiency of new TCM, and precisely respond to the public medication needs.
Medicine, Chinese Traditional/standards* ; Humans ; Consensus ; Drugs, Chinese Herbal/therapeutic use* ; Surveys and Questionnaires

Hongsheng Dan, historically referred to as the "surgical sacred medicine", is at risk of losing its refining technology in contemporary times. This study aimed to preserve and innovate this traditional non-heritage refining technology. By utilizing the analytic hierarchy process(AHP) combined with the entropy weight method, this study established the hierarchical structure model of refining process of Hongsheng Dan and conducted a single factor experiment and an L_9(3~4) orthogonal experiment to optimize the refining method of Hongsheng Dan. Additionally, the study employed infrared thermal imaging to monitor temperature variations of Hongsheng Dan during the refining process. The optimized refining parameters for Hongsheng Dan were established as follows: a slow fire temperature of 175 ℃ with a duration of 30 minutes, a strong fire temperature of 270 ℃ with a duration of 60 minutes, and a tail fire temperature of 180 ℃ with a duration of 15 minutes. The stability and feasibility of this optimized process were confirmed through validation tests. The research focused on the material transformation of Hongsheng Dan, starting from the material changes during the refining process of Hongsheng Dan and the synthesis of mercuric oxide from nitric acid. The study investigated elemental transformations, physical phase changes, and alterations in thermal properties. 78.98% of the mercury in Hongsheng Dan and 80.21% of the mercury in mercuric oxide from nitric acid were retained. The diffraction peak intensity of the(011) crystal plane of Hongsheng Dan was highest at approximately 30.07°, indicating that the(011) crystal plane had a preferred crystalline orientation. Furthermore, the temperature range for the alteration in thermal properties during the refining process of Hongsheng Dan was found to be between 80 ℃ and 130 ℃. This research not only optimized the refining technology of Hongsheng Dan but also pioneered the application of infrared thermal imaging to study temperature changes throughout the refining process. By exploring the material transformation patterns of Hongsheng Dan and the synthesis of mercuric oxide from nitric acid, the study provided technical support for the preservation and innovation of Hongsheng Dan.
Drugs, Chinese Herbal/standards* ; Temperature

OBJECTIVE: To explore the application effect of grid locator in hip arthroscopy for the treatment of femoral acetabular impingement (FAI). METHODS: Total of 50 patients of FAI were treated by arthroscopic hip joint surgery for from January 2020 to January 2021, and were divided into two groups according to intraoperative positioning methods. Among them, 27 cases in the positioner group were treated by hip arthroscopy assisted by grid positioner including 10 males and 17 females with a mean age of (35.91±9.92) years old. In the non-locator group, 23 cases were treated with hip arthroscopy by positioning puncture according to the operator's experience including 12 males and 11 females with a mean age of (36.01±11.03) years old. Intraoperative fluoroscopy times, puncture time, adjusted puncture times and operation time of two groups were compared. The α Angle and lateral central edge(LCE) angle of hip joint were measured and compared before and after operation. Four evaluation indexes were recorded and compared, including pain visual analogue scale(VAS), hip Harris score, non-inflammatory hip joint score (NAHS), hip joint activities of daily living (HOS-ADL). RESULTS: All patients were followed up for 6 to 12 months with an average of (18.69±3.72) months. The α angle and LCE angle of hip joint at 1 month after operation were decreased in both groups(P<0.05), but there was no significant difference between groups(P>0.05). VAS, hip Harris score, NAHS and HOS-ADL score after operation were higher than those before operation(P<0.05), but there was no statistical significance between groups (P>0.05). Intraoperative fluoroscopy times(6.04±1.13), puncture time(13.19±3.52) min, puncture adjustment times(4.59±1.55) and operation time(48.28±3.38) min in the positioner group were less (shorter) than those of (13.43±2.56), (22.39±2.93) min, (10.43±3.33), (62.25±5.73) min in the non-positioner group(P<0.05). No postoperative complications occurred in both groups, and the pain was significantly relieved. CONCLUSION The application of hip arthroscopy in the treatment of femoral acetabular impingement sign can obtain good postoperative results. Compared with the traditional positioning method, the grid locator can improve the accuracy of skin positioning point, shorten the puncture time, reduce the number of fluoroscopy, and improve the efficiency of surgical puncture.
Humans ; Male ; Female ; Arthroscopy/instrumentation* ; Femoracetabular Impingement/physiopathology* ; Adult ; Middle Aged ; Hip Joint/surgery*

OBJECTIVE: To explore the surgical method and clinical efficacy of hip arthroplasty in the treatment of old non-union femoral intertrochanteric fractures. METHODS: Fifteen unoperated patients suffering from old non-union femoral intertrochanteric fractures from Feburary 2013 to Feburary 2023 were treated with hip arthroplasty including 9 males and 6 females, aged 71 to 82 years old. Eleven cases detected deep venous thrombosis(DVT), 9 cases received lower vena cava filter implantation. The operation time, intraoperative blood loss, intraoperative and postoperative blood transfusion, postoperative hemoglobin content, procedure-related complications, and the range of motion of hip flexion, abduction motion were recorded. The degree of hip pain was evaluated using a visual analogue scale(VAS). The hip Harris scores were used to evaluated the clinical efficacy. RESULTS: All patients were followed up for 3 to 12 months. The intraoperative blood loss was 200 to 400 ml, intraoperative blood transfusion was 0 to 400 ml, and the operation time was 40 to 90 min. All 15 patients had different degrees of anemia after surgery, the 3 days postoperative hemoglobin was 72 to 97 g·L^-1, and the postoperative transfusion volume was 0 to 400 ml. All patients had no periprosthetic infection, poor incision healing, lower limb deep vein thrombosis, and cerebral infarction. One case occurred in the early postoperative period, which disappeared from 4 to 5 days after operation, and there was no further revision at the last follow-up. The VAS was 6 to 7 points before operation and 2 to 4 points at latest follow-up;the hip Harris score was 2 to 13 points before operation and 73 to 84 points at latest follow-up. CONCLUSION The unoperated patients of old non-union femoral intertrochanteric fractures had significant clinical and imaging characteristics. Hip arthroplasty combined with or without femoral calcar reconstruction in the treatment of old non-union femoral intertrochanteric fractures had the advantages of relatively simple manipulation, rigid fixation, relatively safe operation, and relatively exact efficacy.
Humans ; Male ; Female ; Aged ; Hip Fractures/physiopathology* ; Aged, 80 and over ; Arthroplasty, Replacement, Hip/methods*

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

OBJECTIVES: To assess the preliminary efficacy and safety of a dose-intensified C5VD regimen (cisplatin, 5-fluorouracil, vincristine, and doxorubicin) in children with locally advanced hepatoblastoma. METHODS: This prospective study enrolled 24 children with newly diagnosed, locally advanced hepatoblastoma who received the dose-intensified C5VD regimen at Shanghai Children's Medical Center, Shanghai Jiao Tong University School of Medicine, and Shanghai Children's Hospital between January 2020 and December 2023. Clinical characteristics, treatment outcomes, and chemotherapy-related toxicities were analyzed. RESULTS: Of the 24 patients, 13 were male and 11 were female, with a median age at diagnosis of 18.7 months (range: 3.5-79.4 months). All patients achieved complete macroscopic resection of hepatic lesions without liver transplantation. Serum alpha-fetoprotein levels decreased significantly after two chemotherapy cycles. During a median follow-up of 38.4 months (range: 15.8-50.7 months), all patients maintained continuous complete remission, with 3-year event-free survival and overall survival rates of 100%. Across 144 chemotherapy cycles, the incidence rates of grade 3-4 neutropenia, thrombocytopenia, and infections were 97%, 77%, and 71%, respectively; no treatment-related deaths occurred. Notably, 5 patients (21%) developed Brock grade ≥3 hearing loss, of whom 1 required a hearing aid. CONCLUSIONS The dose-intensified C5VD regimen demonstrates significant efficacy with an overall favorable safety profile in the treatment of newly diagnosed, locally advanced pediatric hepatoblastoma. Grade 3-4 myelosuppression and infection are the predominant toxicities. However, high‑dose cisplatin-induced ototoxicity remains a concern, highlighting the need for improved otoprotective strategies.
Humans ; Hepatoblastoma/pathology* ; Male ; Female ; Infant ; Liver Neoplasms/pathology* ; Antineoplastic Combined Chemotherapy Protocols/therapeutic use* ; Child, Preschool ; Prospective Studies ; Doxorubicin/adverse effects* ; Child ; Cisplatin/adverse effects* ; Vincristine/adverse effects* ; Fluorouracil/adverse effects*

Objective： The aim of this study is to explore the predictive value of biparametric magnetic resonance imaging(bpMRI)for pelvic lymph node metastasis in prostate cancer patients with PSA≤20 μg/L and establish a nomogram. Methods： The imaging data and clinical data of 363 patients undergoing radical prostatectomy and pelvic lymph node dissection in the First Affiliated Hospital of Nanjing Medical University from July 2018 to December 2023 were retrospectively analyzed. Univariate analysis and multivariate logistic regression were used to screen independent risk factors for pelvic lymph node metastasis in prostate cancer, and a nomogram of the clinical prediction model was established. Calibration curves were drawn to evaluate the accuracy of the model. Results： Multivariate logistic regression analysis showed extrocapusular extension (OR=8.08,95%CI=2.62－24.97, P<0.01), enlargement of pelvic lymph nodes (OR=4.45,95%CI=1.16－17.11,P=0.030), and biopsy ISUP grade(OR=1.97,95%CI=1.12－3.46, P=0.018)were independent risk factors for pelvic lymph node metastasis. The C-index of the prediction model was 0.834, which indicated that the model had a good prediction ability. The actual value of the model calibration curve and the prediction probability of the model fitted well, indicating that the model had a good accuracy. Further analysis of DCA curve showed that the model had good clinical application value when the risk threshold ranged from 0.05 to 0.70.Conclusion： For prostate cancer patients with PSA≤20 μg/L, bpMRI has a good predictive value for the pelvic lymph node metastasis of prostate cancer with extrocapusular extension, enlargement of pelvic lymph nodes and ISUP grade≥4.
Humans ; Male ; Prostatic Neoplasms/diagnostic imaging* ; Lymphatic Metastasis ; Retrospective Studies ; Nomograms ; Prostate-Specific Antigen/blood* ; Lymph Nodes/pathology* ; Pelvis ; Predictive Value of Tests ; Prostatectomy ; Lymph Node Excision ; Risk Factors ; Magnetic Resonance Imaging ; Logistic Models ; Middle Aged ; Aged