Objective:To investigate the effect of laparoscopic splenectomy and azygoportal disconnection (LSD) on liver synthesis and development of liver cirrhosis.Methods:This is a prospective case series study.The clinical data of liver cirrhotic patients with portal hypertension who received LSD at the Department of Hepatobiliary Surgery of Northern Jiangsu People′s Hospital Affiliated to Yangzhou University from September 2014 to January 2016 were included. This study analyzed the diameter of the portal vein, the velocity of portal blood flow, the routine blood parameters, the liver function, the synthetic proteins of liver (antithrombin Ⅲ (AT-Ⅲ), protein S, protein C), and the serum content of liver fibrotic markers(collagen type Ⅳ, procollagen type Ⅲ, laminin, hyaluronidase). Repeated measures ANOVA was used for comparison between multiple groups, and least significance difference was used for post-hoc multiple comparison.Results:A total of 106 patients were included in the study, including 70 males and 36 females, aged (51.8±9.8) years(range: 28 to 75 years).Compared with the preoperative results, the diameter of portal vein and the velocity of portal vein decreased after surgery ( F=14.03, 12.15, respectively, both P<0.01). Compared with the preoperative results, the total bilirubin, albumin, prothrombin time, international normalized ratio, Child-Pugh score and classification were improved ( F=17.96, 56.01, 66.63, 35.83, 33.49, and 27.50, respectively, all P<0.01), and the AT-Ⅲ, protein S, protein C,collagen type Ⅳ, procollagen type Ⅲ, laminin and hyaluronidase levels were also improved ( F=47.87, 36.26, 18.02, 2.79, 14.58, 44.35, and 14.38, respectively, all P<0.01). Compared with the preoperative period, the diameter of portal vein was reduced from the first week to the 24 th month after surgery ( t=5.45 to 9.39, all P<0.01). Compared with the preoperative period, the velocity of portal vein blood from the first week after surgery to the 24 th month after surgery was decreased ( t=4.02 to 8.43, all P<0.01). Compared with the preoperative period, routine blood parameters (white blood count, hemoglobin, platelet count), liver function (total bilirubin, albumin, prothrombin time, international normalized ratio, Child-Pugh score), liver synthetic protein (AT-Ⅲ, protein S, protein C) and liver fibrotic markers (collagen type Ⅳ, procollagen type Ⅲ, laminin, hyaluronidase) were improved to varying degrees at the 24th month after surgery ( t=-20.46 to 11.93, all P<0.01). Conclusion:Preliminary findings show that LSD can reduce portal vein pressure, restore blood cell number, and improve liver synthesis function and the degree of liver fibrosis in patients with portal hypertension in liver cirrhosis.

Objective:To investigate the effect of laparoscopic splenectomy and azygoportal disconnection (LSD) on liver synthesis and development of liver cirrhosis.Methods:This is a prospective case series study.The clinical data of liver cirrhotic patients with portal hypertension who received LSD at the Department of Hepatobiliary Surgery of Northern Jiangsu People′s Hospital Affiliated to Yangzhou University from September 2014 to January 2016 were included. This study analyzed the diameter of the portal vein, the velocity of portal blood flow, the routine blood parameters, the liver function, the synthetic proteins of liver (antithrombin Ⅲ (AT-Ⅲ), protein S, protein C), and the serum content of liver fibrotic markers(collagen type Ⅳ, procollagen type Ⅲ, laminin, hyaluronidase). Repeated measures ANOVA was used for comparison between multiple groups, and least significance difference was used for post-hoc multiple comparison.Results:A total of 106 patients were included in the study, including 70 males and 36 females, aged (51.8±9.8) years(range: 28 to 75 years).Compared with the preoperative results, the diameter of portal vein and the velocity of portal vein decreased after surgery ( F=14.03, 12.15, respectively, both P<0.01). Compared with the preoperative results, the total bilirubin, albumin, prothrombin time, international normalized ratio, Child-Pugh score and classification were improved ( F=17.96, 56.01, 66.63, 35.83, 33.49, and 27.50, respectively, all P<0.01), and the AT-Ⅲ, protein S, protein C,collagen type Ⅳ, procollagen type Ⅲ, laminin and hyaluronidase levels were also improved ( F=47.87, 36.26, 18.02, 2.79, 14.58, 44.35, and 14.38, respectively, all P<0.01). Compared with the preoperative period, the diameter of portal vein was reduced from the first week to the 24 th month after surgery ( t=5.45 to 9.39, all P<0.01). Compared with the preoperative period, the velocity of portal vein blood from the first week after surgery to the 24 th month after surgery was decreased ( t=4.02 to 8.43, all P<0.01). Compared with the preoperative period, routine blood parameters (white blood count, hemoglobin, platelet count), liver function (total bilirubin, albumin, prothrombin time, international normalized ratio, Child-Pugh score), liver synthetic protein (AT-Ⅲ, protein S, protein C) and liver fibrotic markers (collagen type Ⅳ, procollagen type Ⅲ, laminin, hyaluronidase) were improved to varying degrees at the 24th month after surgery ( t=-20.46 to 11.93, all P<0.01). Conclusion:Preliminary findings show that LSD can reduce portal vein pressure, restore blood cell number, and improve liver synthesis function and the degree of liver fibrosis in patients with portal hypertension in liver cirrhosis.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

[摘 要] 目的：比较国产与进口CD3/CD28激活磁珠制备的CAR-T细胞的性能差异，为国内CAR-T细胞研发和生产提供备用或替代方案。方法：以进口CD3/CD28激活磁珠︰CD3+ T细胞比例为1∶1的成熟方案作为研究对照，国产磁珠设置1∶2、1∶1和2∶1的比例梯度激活T细胞，T细胞激活72 h后使用CAR慢病毒感染制备CAR-T细胞。分别在慢病毒感染后的第2、4、7天计数，监测CAR-T细胞增殖情况；感染5 d后采用流式细胞术检测CAR-T细胞阳性率；感染8 d后采用流式细胞术检测CAR-T细胞的CD4/CD8分型情况和PD1+ TIM3+耗竭细胞比例。结果：国产CD3/CD28激活磁珠与进口磁珠制备的CAR-T细胞CD4/CD8分型相似，CAR-T细胞阳性率略低于进口磁珠（53.7% vs 57.9%），但CAR-T细胞扩增较进口磁珠增加1倍左右，耗竭水平仅为进口磁珠的一半（4.21% vs 7.91%）。此外，国产磁珠的使用量低于进口磁珠，有利于降低CAR-T细胞研发和生产成本。结论：国产CD3/CD28激活磁珠用于制备CAR-T细胞总体性能不劣于进口磁珠，有潜力作为进口磁珠的备用或替代方案。

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective: The treatment of asymmetric maxillary hypoplasia and dental crowding secondary to unilateral cleft lip and palate (UCLP) is often challenging.This study introduced an asymmetric tooth-borne distractor in anterior maxillary segmental distraction osteogenesis and used three-dimensional finite element analysis to evaluate its potential for clinical application in cases of asymmetrical maxillary hypoplasia. Methods: A cone-beam computed tomography scan of a late adolescent with UCLP was used to construct a three-dimensional finite element model of the teeth and maxillary structures. An asymmetric distractor model was used to simulate conventional distraction osteogenesis and asymmetric distraction osteogenesis (ADO) to evaluate the resultant stress distribution and displacement. Results: Postoperatively, both distraction methods resulted in anterior maxillary segment advancement with a slight upward movement. ADO yielded a greater increase in the dental arch length on the cleft side and induced rotation of the anterior maxillary segment, potentially improving midline deviation. Both methods showed similar stress distributions, with higher stress concentrations on the cleft side. Conclusions ADO may offer clinical advantages in correcting asymmetrical maxillary hypoplasia in patients with UCLP by facilitating asymmetrical expansion and rotation of the maxilla. Further research is needed to generalize these findings to other clinical presentations.

Objective To construct large medical model named by "Huaxi HongYi"and explore its application effectiveness in assisting medical record generation. Methods By the way of a full-chain medical large model construction paradigm of "data annotation - model training - scenario incubation", through strategies such as multimodal data fusion, domain adaptation training, and localization of hardware adaptation, "Huaxi HongYi" with 72 billion parameters was constructed. Combined with technologies such as speech recognition, knowledge graphs, and reinforcement learning, an application system for assisting in the generation of medical records was developed. Results Taking the assisted generation of discharge records as an example, in the pilot department, after using the application system, the average completion times of writing a medical records shortened (21 min vs. 5 min) with efficiency increased by 3.2 time, the accuracy rate of the model output reached 92.4%. Conclusion It is feasible for medical institutions to build independently controllable medical large models and incubate various applications based on these models, providing a reference pathway for artificial intelligence development in similar institutions.

Platycodonis Radix is the dry root of Platycodon grandiflorum of Campanulaceae, which has a variety of pharmacological effects and is a commonly used bulk Chinese medicine. In this study, the chloroplast genome sequences of six P. grandiflorum from different producing areas has been sequenced with Illumina HiSeq X Ten platform. The specific DNA barcodes were screened, and the germplasm resources and genetic diversity were analyzed according to the specific barcodes. The total length of the chloroplast genome of 6 P. grandiflorum samples was 172 260-172 275 bp, and all chloroplast genomes showed a typical circular tetrad structure and encoded 141 genes. The comparative genomics analysis and results of amplification efficiency demonstrated that trnG-UCC and ndhG_ndhF were the potential specific DNA barcodes for identification the germplasm resources of P. grandiflorum. A total of 305 P. grandiflorum samples were collected from 15 production areas in 9 provinces, for which the fragments of trnG-UCC and ndhG_ndhF were amplificated and the sequences were analyzed. The results showed that trnG-UCC and ndhG_ndhF have 5 and 11 mutation sites, respectively, and 5 and 7 haplotypes were identified, respectively. The combined analysis of the two sequences formed 13 haplotypes (named Hap1-Hap13), and Hap4 is the main genotype, followed by Hap1. The unique haplotypes possessed by the three producing areas can be used as DNA molecular tags in this area to distinguish from the germplasm resources of P. grandiflorum from other areas. The haplotype diversity, nucleotide diversity and genetic distance were 0.94, 4.79×10^-3 and 0.000 0-0.020 3, respectively, suggesting that the genetic diversity was abundant and intraspecific kinship was relatively close. This study laid a foundation for the identification of P. grandiflorum, the protection and utilization of germplasm resources, and molecular breeding.