Purpose: This study examined the impact of professional Quality of life (QoL) on turnover intention among general hospital nurses using linear and nonlinear analytical techniques. Methods: Data were collected from 159 general hospital nurses and analyzed using SPSS, t-test, ANOVA, Pearson's correlation coefficients, multiple linear regression, and nonlinear machine learning models (Bootstrap Forest and Boosted Tree). Results: Significant correlations were observed between turnover intention and both compassion satisfaction (r=-.26, p<.001) and burnout (r=.27, p=.001). Compassion satisfaction, burnout, and compassion fatigue were identified as the key variables influencing turnover intention. The explanatory power of multiple linear regression analysis was 6.9%, whereas the nonlinear machine learning models demonstrated an explanatory power of 50.5% for Bootstrap Forest and 45.1% for Boosted Tree. Conclusion Continuous investment in human resource management, within nursing organizations, is essential to promote the long-term retention of general hospital nurses. This investment should focus on enhancing compassion satisfaction and reducing burnout and compassion fatigue by fostering a sense of vocation and positive job satisfaction.

Purpose: This study aimed to empirically verify the impact of measurement model selection on research outcomes and their interpretation through an analysis of children’s emotional and social problems measured by the Pediatric Symptom Checklist (PSC) using both reflective and formative measurement models. These models were represented by covariance-based structural equation modeling (CB-SEM) and partial least squares SEM (PLS-SEM), respectively. Methods: This secondary data analysis evaluated children’s emotional and social problems as both reflective and formative constructs. Reflective models were analyzed using CB-SEM, while formative models were assessed using PLS-SEM. Comparisons between these two approaches were based on model fit and parameter estimates. Results: In the CB-SEM analysis, which assumed a reflective measurement model, a model was not identified due to inadequate fit indices and a Heywood case, indicating improper model specification. In contrast, the PLS-SEM analysis, assuming a formative measurement model, demonstrated adequate reliability and validity with significant path coefficients, supporting the appropriateness of the formative model for the PSC. Conclusion The findings indicate that the PSC is more appropriately analyzed as a formative measurement model using PLS-SEM, rather than as a reflective model using CB-SEM. This study highlights the necessity of selecting an appropriate measurement model based on the theoretical and empirical characteristics of constructs in nursing research. Future research should ensure that the nature of measurement variables is accurately reflected in the choice of statistical models to improve the validity of research outcomes.

Purpose: This study examined the associations of grit, self-leadership, and followership with nurses’ competency in evidence-based practice in South Korea. Methods: This descriptive correlational study included 203 nurses from a general hospital. Data collection was conducted from May 8 to June 21, 2024. Results: The mean score for competency in evidence-based practice was 4.16 of 7. Competency in evidence-based practice correlated positively with grit (r = .62, p < .001), self-leadership (r = .54, p < .001), and followership (r = .72, p < .001). Followership (β = 0.53, p < .001), grit (β = 0.24, p < .001) and research experience (β = 0.11, p = .024) significantly influenced competency in evidence-based practice. The model’s explanatory power was calculated to be 55.1%. Conclusion Followership and grit are key factors in developing strategies to enhance nurses’ competency in evidence-based practice. Additionally, providing support for research experience in clinical settings may further strengthen competency in evidence-based practice.

Background: Factors influencing the decline in forced expiratory volume in one second (FEV1 )/forced vital capacity (FVC) for chronic obstructive pulmonary disease (COPD) progression remain uncertain. We aimed to identify risk factors associated with rapid FEV1 / FVC decline in patients with COPD. Methods: This multi-center observational study was conducted from January 2012 to December 2022. Eligible patients were monitored with symptoms, spirometric tests, and treatment patterns over 3 years. Rapid FEV1 /FVC decliners were defined as the quartile of patients exhibiting the highest annualized percentage decline in FEV1 /FVC. Results: Among 1,725 patients, 435 exhibited rapid FEV1 /FVC decline, with an annual change of −2.5%p (interquartile range, −3.5 to −2.0). Rapid FEV1 /FVC decliners exhibited lower body mass index (BMI), higher smoking rates, elevated post-bronchodilator (BD) FEV1 , higher post-BD FEV1 / FVC, and a lower prevalence of Staging of Airflow Obstruction by Ratio (STAR) stage IV. Rapid FEV1 /FVC decline was not linked to the annual exacerbation rate, but there was an association with symptom deterioration and FEV1 decline. In multivariable analyses, low BMI, current smoking, increased modified Medical Research Council dyspnoea score, low post-BD FEV1 , low STAR stage, high forced mid-expiratory flow (FEF 25-75% ), accelerated FEV1 decline, and not initiating dual BD therapy were identified as independent risk factors for rapid FEV1 /FVC decline. Conclusion We identified the risk factors for rapid FEV1 /FVC decline, including BMI, smoking, symptoms deterioration, FEV1 decline, and adherence to standard inhaler treatment. Our findings underscore the potential benefits of maintaining consistent use of long-acting beta-agonist/long-acting muscarinic antagonist even in the presence of worsening symptoms, in attenuating FEV1 /FVC decline.

Background: s/Aims: Hepatocellular carcinoma (HCC) is a malignant cancer with an increasing incidence worldwide. Although numerous efforts have been made to identify effective therapies for HCC, current strategies have limitations. We present a new approach for targeting L-arginine and argininosuccinate synthetase 1 (ASS1). Methods: ASS1 expression in HCC cell lines and primary hepatocytes was detected using polymerase chain reaction and western blotting. Proliferation, migration, signaling pathways, and nitric oxide production in HCC cell lines were measured using MTS, colony formation, wound healing, Western blot, and Griess assays. Results: ASS1 expression varied among the HCC cell lines, and cisplatin cytotoxicity was ASS1-dependent. L-arginine alone induced apoptosis in HCC cell lines, regardless of ASS1 expression; however, its effect was enhanced in ASS1-expressing HCC cell lines. Cisplatin cytotoxicity also increased, suggesting that L-arginine acts as a sensitizer to cisplatin in HCC cell lines. ASS1 and L-arginine produced nitric oxide and inhibited key proliferation- and survival-related signaling pathways such as PI3K/Akt and MAPK. Additionally, ASS1 and L-arginine reduced the expression of PKM1 and PKM2 in the glycolysis pathway. Conclusions Our study revealed that ASS1 and L-arginine exhibited anticancer effects in HCC and sensitized cisplatin-resistant HCC cells to chemotherapy. The combination of ASS1 and L-arginine significantly enhanced the anticancer effects, even in HCC cell lines with low or absent ASS1 expression. These findings highlight the critical roles of arginine and ASS1 in HCC and suggest that increasing arginine availability could be a promising therapeutic strategy.

Background and Objectives: Pediatric chronic rhinosinusitis (CRS) significantly affects children’s quality of life and learning abilities. This study aimed to evaluate the postoperative outcomes in pediatric patients who underwent functional endoscopic sinus surgery (FESS) for CRS. Methods: A retrospective review was conducted on pediatric patients who underwent FESS for CRS at 11 university hospitals. The inclusion criteria were patients under 20 years old with bilateral disease who were operated on between January 2005 and December 2021. The data collected included demographics, clinical history, blood tests, preoperative computed tomography, and preoperative and postoperative symptom control. The Kruskal-Wallis and Fisher exact tests were used to compare the quantitative and qualitative data, respectively. Results: In total, 213 patients were enrolled. The mean age was 13.4±3.0 years, and 145 (68.1%) were male. One hundred sixty-four patients (77.0%) had nasal polyps and 33 patients (15.5%) underwent revision FESS. The preoperative symptoms, in order of prevalence, included nasal obstruction (87.8%), rhinorrhea (71.8%), a sense of postnasal drip (58.2%), hyposmia (44.6%), cough (24.4%), and facial fullness (18.3%). These symptoms were significantly alleviated for up to 3 years after surgery (p<0.001). At the time of the last follow-up, 121 patients (56.8%) were controlled, 80 (37.6%) were partly controlled, and 12 (5.6%) were uncontrolled. Patients in the uncontrolled group had higher Lund-Mackay scores, longer follow-up durations, and more instances of revision surgery compared to those in the controlled and partly controlled groups. When age was categorized into three groups, those aged 16 years or older tended to have lower Lund-Mackay scores and better control. Conclusion FESS significantly improves both the postoperative symptoms and the long-term quality of life in pediatric CRS patients. Better symptom control is associated with older age and a lower disease burden.

Background: The tibiofibular syndesmosis is essential for preserving the stability of the ankle. Acute syndesmotic injuries with evident or latent instability usually warrant surgical interventions. This cadaveric study examines and compares biomechanical characteristics between the following treatments for syndesmosis injuries: suture-button fixation plus syndesmotic repair and screw fixation. Methods: The lower extremities of 10 cadavers disarticulated at the knee joints were used, yielding 20 feet. Ten feet underwent surgery using the suture-button fixation with syndesmotic repair, while the remaining 10 feet underwent surgery using screw fixation. Before surgical treatment of syndesmosis injuries, each cadaveric lower limb underwent preliminary physiological cyclic loading, which was followed by a series of postfixation cyclic loading tests after the surgical procedure. Results: Our principal finding is that suture-button fixation with syndesmotic repair provided torsional strength comparable to that of screw fixation. The mean failure torque did not differ between the 2 groups, but the rotational stiffness was significantly lower in the suture-button fixation/augmentation group. Conclusions Suture-button fixation/augmentation facilitates flexible (physiological) syndesmosis movement and may be a useful alternative treatment for ankle syndesmosis injury.

Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.

Background: The removal of a well-fixed acetabular cup is a challenging, labor-intensive, and time-consuming step during revision hip arthroplasty. Although the advent of the manual osteotome, Explant, has simplified the procedure, it is still a stressful process as it dissipates the surgeon’s strength and time and risks an iatrogenic pelvic fracture. Recently, EZX, a powered tool for extraction of well-fixed acetabular cups with semicircular blade was invented. This study aimed to compare Explant and EZX in an experimental condition for their efficacy and safety. Methods: Cementless acetabular cups were press-fitted to 20 hemipelvic polyurethane models using foam adhesives. Ten cups were removed with each tool for comparison of the elapsed time, loads on the entire hemipelvis, periacetabular strain and temperature, volume of periacetabular bone removed, and diameter of the remaining acetabular rim. Strains and loads were quantitatively assessed using strain gauges and load cells for precise and reliable measurements. Results: The mean duration required to remove a well-fixed cup with EZX was 38.5 seconds (range, 25–55), whereas that with Explant was 543.7 seconds (range, 214–1,051) (p < 0.001). The load on the entire hemipelvis with EZX (mean, 9.1 kgf; range, 6.4–11.3) was 33% lower than that with Explant (mean, 13.6 kgf; range, 9.2–17.1) (p < 0.001). The periacetabular peak strains at the 3 positions with EZX were significantly lower than those with Explant (p < 0.001). The temperature during the removal did not differ significantly between the 2 tools. Although the mean volume of bone loss with Explant was 2.4 mL more than that with EZX (p < 0.001), the mean diameters of the remaining acetabular rim were not significantly different, measuring 54.1 mm with both tools. Conclusions The present experiment revealed that a well-fixed cup could be removed using a powered tool with less strength and time and less load on the entire pelvis. Although the powered tool removed a larger volume of bone, the diameters of the remaining acetabular rims were equivalent. This tool may help surgeons remove well-fixed cups in a short time and reduce the deforming load on the bone around the cup without increasing the size of the subsequent reconstruction cup.