ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

Objective To study the photodynamic performance and the killing effect of photodynamic therapy on lung cancer of novel chlorin compounds 2-（4-（5,15,20-triphenyl-7H,8H-porphyrin-10-yl） phenoxy） acetic acid（D1）and 4-（4-（5,15,20-triphenyl-7H,8H-porphyrin-10-yl） phenoxy） butanoic acid （D2）. Methods The ultraviolet visible absorption spectrum and fluorescence spectrum of D1 and D2 were determined. The singlet oxygen generation capacity of D1 and D2 was measured by using DPBF as singlet oxygen capture agent. Fluorescence assay was used to detect the cellular phagocytosis rate of the compounds in A549 cells, and MTT assay was used to detect their dark toxicity and phototoxicity. A nude mouse model of lung cancer was established to investigate the antitumor activity of the compounds mediated photodynamic action in vivo, and the blood concentration of D2 in nude mice, its distribution in tumor tissue and skin tissue were further detected. Results D1 and D2 had strong absorption at 652 nm with the best excitation wavelength at 429 nm and 427 nm, and the optimal emission wavelength was at about 659 nm. They also had a higher singlet oxygen generation rate than the control drug m-THPC. D1 and D2 had no dark toxicity at concentrations below 10 μmol/L, and could be ingested by A549 cells, basically reaching saturation in 18~24 hours. After laser irradiation at 650 nm wavelength, D1 and D2 showed significant antitumor activity in vivo and in vitro （P<0.01）. However, D2 could selectively accumulate in tumor tissues after administration, and the optimal treatment time was less than 30 min after administration. Conclusion D2 had excellent photodynamic antitumor activity and could selectively aggregate in tumor tissues, which had the potential to be a candidate drug for photosensitizer and treatment of lung cancer with independent intellectual property rights, and was worth further research.

A unified consensus statement on medication-related osteonecrosis of the jaw (MRONJ) has not yet been established among the Asian member countries or regions of the Asian Federation of Osteoporosis Societies (AFOS). This study aimed to develop a consensus on MRONJ in patients with osteoporosis across these countries and regions. In this study, the term “Asia-Pacific” refers specifically to the Asian member countries and regions of AFOS. A structured survey consisting of nine MRONJ-related questions was distributed across 10 countries and regions to assess the level of agreement and summarize regional perspectives. In addition, a manual literature review and voting were conducted to evaluate the current evidence on MRONJ. The key aspects of MRONJ, including definition, staging, diagnosis, pathogenesis, risk factors, management, and prevention, were generally consistent among the AFOS countries and regions. The annual incidence and incidence rate of MRONJ associated with low-dose antiresorptive therapy in patients with osteoporosis ranged from 0.025% to 0.136% and 21 to 283 cases per 100,000 person-years, respectively. However, evidence regarding the benefits of drug discontinuation before dental surgery, such as tooth extraction, remains insufficient. Large-scale, multinational studies across AFOS countries and regions are warranted to determine the incidence of MRONJ better and evaluate the impact of antiresorptive drug discontinuation before dental procedures. These findings may contribute to the devel opment of effective evidence-based strategies for preventing MRONJ in patients with osteoporosis.

Background: and Purpose Vertebrobasilar fusiform aneurysms (VBFAs) carry substantial morbidity and mortality, but optimal management for unruptured VBFAs remains unclear. We compared the safety and efficacy of conservative management (CM), stent-assisted coiling (SAC), and flow diverters (FDs) in patients with unruptured VBFAs, focusing on long-term prognosis. Methods: This study included data from a nationwide Chinese cohort of patients with vertebrobasilar dissecting aneurysms. Inverse probability of treatment weighting (IPTW) balanced confounders across groups. The primary outcome was poor prognosis (modified Rankin Scale score >2). Secondary outcomes included aneurysm rupture, ischemic stroke, compression symptoms, and VBFA-related deaths. Logistic regression estimated odds ratios (ORs) and 95% confidence intervals (CIs). Subgroup and sensitivity analyses were performed. Results: Among 1,115 patients with unruptured VBFAs, 838 (median age, 54 years; 655 men) were included. After IPTW, baseline characteristics were balanced. Median follow-up was 54 months. FD was associated with a lower risk of poor prognosis than CM (OR, 0.48 [95% CI, 0.30 to 0.77]; p=0.002), with no difference between CM and SAC. FD also reduced aneurysm rupture (OR, 0.20 [95% CI, 0.07 to 0.60]; p=0.004) and compression symptoms (OR, 0.30 [95% CI, 0.13 to 0.68]; p=0.004) versus CM. Time-to-event analyses further revealed significant differences in vertebral artery lesions and Type I–II VBFAs, whereas no significant differences were observed in basilar or vertebrobasilar junction lesions or in Type III–IV VBFAs. Conclusions Compared with CM, FD was associated with improved long-term outcomes in unruptured VBFAs, particularly in vertebral artery lesions and Type I–II VBFAs, although residual confounding cannot be excluded.

Objective To gain insights into the biological characteristics of different populations of Culex tritaeniorhynchus within and around the Yellow Sea wetland from the perspective of the occurrence of resistance, we investigated the levels of resistance to deltamethrin and kdr gene mutation in the wetland and its peripheral areas. Methods Specimens were collected from Cx. tritaeniorhynchus populations at two monitoring sites in the Rare Bird National Nature Reserve and Tiaozi Ni Wetland Scenic Area, and also from two populations in Yancheng City and the Liuhe District of Nanjing, and the resistance of these mosquitoes to deltamethrin was determined using the CDC biotest bottle method. For each concentration of deltamethrin assessed, a random subset of exposed specimens was selected for amplification of the kdr gene fragment, followed by Sanger sequencing to identify and analyze resistance-associated mutations. Results The LC50 levels of deltamethrin among mosquitoes from the four populations in Luhe, Yancheng, the Rare Bird National Nature Reserve and the Tiaozi Ni Wetland Scenic Area were 2.048 5, 7.798 2, 3.473 3, and 17.695 5 mg/mL, respectively, with corresponding concentrations of deltamethrin ranging from 0.005 to 5.000,0.050 to 50.000,0.050 to 25.000 and 0.050 to 50.000 mg/mL, respectively. Furthermore, the ranges of the KT50 values were 11.76-107.43, 67.05-216.30,29.77-107.43 and 28.40-329.51 min; the 1-h knockdown rates were 34.58%-99.15%, 9.52%-43.80%, 55.09%-73.01%, and 10.09%-68.07%; and the 24-h mortality rates were 12.15%-67.52%,9.52%-79.56%,13.17%-82.21%, and 11.01%-78.99%, respectively. With respect to kdr gene mutation, we assayed a total of 63,70,59, and 57 mosquitoes for the four populations, for which we detected L1014F mutation frequencies of 14.29%, 35.00%, 20.34%, and 31.58%, respectively, with a majority of these mutations being heterozygous for resistance. In addition, five adult mosquitoes were identified has having synonymous mutations at site 1011[i. e. , AAT(asparagine)mutation to AAC(asparagine)]. Conclusions Our findings revealed the clear resistance of Cx. tritaeniorhynchus to deltamethrin in the Yancheng region of the Yellow Sea wetland, and the resistance phenotype and kdr frequency of Cx. tritaeniorhynchus in the wetland environment were comparable to those of Cx. tritaeniorhynchus in the wetland environment, thereby indicating that the resistance of different populations of Cx. tritaeniorhynchus was homogeneous under the pressure of different insecticide selection within and around the wetland. However, the underlying mechanisms need to be further studied.

ObjectiveTo investigate the current awareness and optimization recommendations on pneumonia with unknown etiology (PUE) surveillance among Shanghai healthcare professionals, and to provide evidence for the improvement of the surveillance system. MethodsIn December 2024, healthcare professional participants from diverse medical and health institutions were randomly selected within each stratum using a stratified cluster sampling method in all 16 districts of Shanghai for questionnaire surveys on their knowledge and suggestions for optimization of the PUE surveillance system. Descriptive statistics analyses, multivariate logistic regressions, and content analyses were used for data analyses. ResultsA total of 385 survey subjects were involved in the study, including 119 professional staffs from disease prevention and control centers and 266 from medical institutions. Those who understood the case definition for PUE correctly accounted for 67.01% (258/385). Multivariate regression model analyses showed that female gender (aOR=2.22, 95%CI: 1.36‒3.66), professionals from disease control institutions (aOR=2.02, 95%CI: 1.12‒3.72), and those who self-assessed as being familiar with the monitoring system (aOR=2.18, 95%CI:1.23‒3.89) had better understanding of the definition. Overall, 89.61% (345/385) of the survey subjects acknowledged the necessity of the surveillance system. Small number of cases meeting the case definition (54.46%, 214/379), insufficient diagnostic awareness (39.84%, 151/379), and lack of incentives for case reporting (29.29%, 111/379) were major problems for the current surveillance system, with variations observed across different types of institutions. Suggested segments for optimizing the surveillance system included monitoring purpose, case definition, form of monitoring and reporting procedure, organization mechanism, and epidemiological investigation and response. ConclusionThe necessity of PUE surveillance is commonly recognized among healthcare workers. However, the existing system falls short in terms of mastery of case definition and overall surveillance adaptability. There is an urgent need for optimization and improvement to enhance the capacity for preventing and controlling emerging and sudden respiratory infectious diseases.

OBJECTIVE: To explore the early clinical efficacy of a three-stage external treatment with traditional Chinese medicine (TCM) in the treatment of talar bone contusion caused by acute ankle sprain. METHODS: A retrospective analysis was performed on 360 patients with primary lateral ankle sprain admitted from September 2021 to July 2024. Patients with talar bone contusion were selected based on MRI examination, and 73 cases were finally included. According to different treatment methods, they were divided into the observation group and the control group. The observation group consisted of 35 cases, including 16 males and 19 females, aged 24 to 37 years old with an average of (30.34±2.68) years old, and received the three-stage external TCM treatment combined with the "POLICE" protocol. The control group included 38 cases, including 18 males and 20 females, aged 24 to 35 years old with an average of (29.87±2.57) years old, and was treated with the "POLICE" protocol alone. The volume of bone marrow edema (BME) area shown by MRI before treatment and 6 weeks after treatment was measured using 3D Slicer software, and the BME improvement rate was calculated. The "Figure of 8" measurement method was used to assess ankle swelling before treatment and at 1 and 3 weeks after treatment. The visual analogue scale (VAS) was used to evaluate ankle pain before treatment and at 1 and 6 weeks after treatment. At 6 weeks after treatment, the American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score and Karlsson ankle function score system were used to evaluate the improvement of ankle function. RESULTS: A total of 73 patients with talar bone contusion caused by ankle sprain completed the 6-week follow-up. At 6 weeks after treatment, the BME improvement rate in the observation group was (39.18±0.06)%, which was higher than (26.75±0.03)% in the control group, with a statistically significant difference (P<0.05). After 1 week of treatment, the VAS score in the observation group was (2.89±0.72) points, lower than (3.37±0.79) points in the control group, and the difference was statistically significant (P<0.05). The ankle swelling degree in the observation group was (50.20±3.19) cm, lower than (52.00±3.60) cm in the control group, with a statistically significant difference (P<0.05). After 3 weeks of treatment, there was no statistically significant difference in ankle swelling between the two groups. At 6 weeks after treatment, there was no statistically significant difference in VAS scores between the two groups. At 6 weeks after treatment, the AOFAS ankle-hindfoot score and Karlsson score in the observation group were (87.43±4.18) and (82.77±5.93) points, respectively, which were higher than (82.92±4.87) and (76.45±6.85) points in the control group, with statistically significant differences (P<0.05). According to the AOFAS ankle-hindfoot score, 8 cases were excellent and 27 cases were good in the observation group;2 cases were excellent, 33 cases were good, and 3 cases were fair in the control group. The difference between the two groups was statistically significant (χ²=7.089, P=0.029). CONCLUSION The three-stage external TCM treatment combined with the "POLICE" protocol has a significant early clinical efficacy. It can significantly reduce ankle pain and swelling in patients with bone contusion caused by acute lateral ankle sprain, promote the absorption of bone marrow edema, and accelerate the recovery of ankle function.
Ankle Injuries/drug therapy* ; Drugs, Chinese Herbal/administration & dosage* ; Talus/injuries* ; Retrospective Studies ; Administration, Cutaneous ; Magnetic Resonance Imaging ; Humans ; Male ; Female ; Young Adult ; Adult ; Contusions/etiology* ; Visual Analog Scale ; Musculoskeletal Pain/etiology* ; Recovery of Function/drug effects* ; Treatment Outcome ; Follow-Up Studies

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

OBJECTIVE: To investigate the accuracy and safety of pedicle screw placement using 3D-printed auxiliary guides in scoliosis correction surgery for adolescents. METHODS: A retrospective analysis was conducted on the clinical data of 51 patients who underwent posterior scoliosis correction surgery from January 2020 to March 2023. Among them, there were 35 cases of adolescent idiopathic scoliosis and 16 cases of congenital scoliosis. The patients were divided into two groups based on the auxiliary tool used:the 3D-printed auxiliary guide screw placement group (3D printing group) and the free-hand screw placement group (free-hand group, without auxiliary tools). The 3D printing group included 32 patients (12 males and 20 females) with an average age of (12.59±2.60) years;the free-hand group included 19 patients (7 males and 12 females) with an average age of (14.58±3.53) years. The two groups were compared in terms of screw placement accuracy and safety, spinal correction rate, intraoperative blood loss, number of intraoperative fluoroscopies, operation time, hospital stay, and preoperative and last follow-up scores of the Scoliosis Research Society-22 (SRS-22) questionnaire. RESULTS: A total of 707 pedicle screws were placed in the two groups, with 441 screws in the 3D printing group and 266 screws in the free-hand group. All patients in both groups successfully completed the surgery. There was a statistically significant difference in operation time between the two groups (P<0.05). The screw placement accuracy rate of the 3D printing group was 95.46% (421/441), among which the Grade A placement rate was 89.34% (394/441);the screw placement accuracy rate of the free-hand group was 86.47% (230/266), with a Grade A placement rate of 73.31% (195/266). There were statistically significant differences in the accuracy of Grade A, B, and C screw placements between the two groups (P<0.05), while no statistically significant differences were observed in intraoperative blood loss, number of fluoroscopies, correction rate, or hospital stay (P>0.05). In the SRS-22 questionnaire scores, the scores of functional status and activity ability, self-image, mental status, and pain of patients in each group at the last follow-up were significantly improved compared with those before surgery (P<0.05), but there were no statistically significant differences in all scores between the two groups (P>0.05). CONCLUSION In scoliosis correction surgery, compared with traditional free-hand screw placement, the use of 3D-printed auxiliary guides for screw placement significantly improves the accuracy and safety of screw placement and shortens the operation time.
Humans ; Male ; Scoliosis/surgery* ; Female ; Adolescent ; Printing, Three-Dimensional ; Retrospective Studies ; Pedicle Screws ; Child

Primary ciliary dyskinesia (PCD) is a clinically rare, genetically and phenotypically heterogeneous condition characterized by chronic respiratory tract infections, male infertility, tympanitis, and laterality abnormalities. PCD is typically resulted from variants in genes encoding assembly or structural proteins that are indispensable for the movement of motile cilia. Here, we identified a novel nonsense mutation, c.466G>T, in cilia- and flagella-associated protein 300 ( CFAP300 ) resulting in a stop codon (p.Glu156*) through whole-exome sequencing (WES). The proband had a PCD phenotype with laterality defects and immotile sperm flagella displaying a combined loss of the inner dynein arm (IDA) and outer dynein arm (ODA). Bioinformatic programs predicted that the mutation is deleterious. Successful pregnancy was achieved through intracytoplasmic sperm injection (ICSI). Our results expand the spectrum of CFAP300 variants in PCD and provide reproductive guidance for infertile couples suffering from PCD caused by them.
Adult ; Female ; Humans ; Male ; Pregnancy ; China ; Ciliary Motility Disorders/genetics* ; Codon, Nonsense ; East Asian People/genetics* ; Exome Sequencing ; Homozygote ; Infertility, Male/genetics* ; Kartagener Syndrome/genetics* ; Pedigree ; Sperm Injections, Intracytoplasmic ; Cytoskeletal Proteins/genetics*