ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

Objective Aedes albopictus is the primary vector of the dengue virus.Screening and the analysis of immune-related genes in DENV2-infected Ae.albopictus provides a scientific basis for further research on blocking the extrinsic incubation period of the dengue virus.Methods Through the approach of literature mining,thirty-three potential immune-related genes were screened from species such as Aedes aegypti and Anopheles gambiae,which have a close genetic relationship with Ae.albopictus.The protein—protein interaction(PPI)analysis is employed to explore the interaction relationship of the proteins encoded by genes.The alterations in mRNA expression levels of the relevant genes in DENV2-infected Ae.albopictus midgut were detected using the qRT-PCR method.Results The PPI results indicates that TLR and Spz of Ae.albopictus;Rel1,Rel2,DefC,Spz,PIWI,Ago2,DOME and HOP of Ae.aegypti;and Rel1,Rel2,CACT,STAT and DOME of An.gambiae exhibit PPI relationships.After Ae.albopictus was infected with DENV2,10 genes showed significant difference in expression.Ago3(7.39,P<0.05),DOMEa(1.63,P<0.01),DOMEb(21.29,P<0.001),and TLRb(1.61,P<0.05)were significantly up-regulated.Rel1(0.62,P<0.001),CACTl(0.65,P<0.001),Rel2a(0.65,P<0.01),Rel2b(0.24,P<0.001),GATAa(0.64,P<0.01)and DefC(0.28,P<0.05)were significantly down-regulated.Conclusions The concordance of Ae.albopictus with Ae.aegypti was higher than that with An.gambiae.DOMEb,Ago3,Rel2b and DefC,can serve as the preferred target genes for subsequent studies on DENV2 immune blockade.

Aim To explore the mechanisms of PM2.5 exposure exacerbating bleomycin(BLM)-induced idio-pathic pulmonary fibrosis(IFP)by regulating ferropto-sis via nuclear factor 2 related factor 2(Nrf2)/solute carrier family 7 member 11(SLC7A11)/glutathione peroxidase(GPX)4 axis.Methods Forty C57BL/6J mice were randomized into the control,BLM,PM2.5,BLM+PM2.5 and sulforaphane(SFN,Nrf2 agonist)groups,with eight mice in each group.PM2.5 expo-sures were conducted to the BLM-induced IPF mice for two weeks.The lung function was measured,and the content of hydroxyproline(HYP)in lung tissue and the pathomorphology of lungs were observed.Reactive oxygen species(ROS),malondialdehyde(MDA),ferrous ion(Fe2+)and glutathione(GSH)of the lung tissue were measured by ELISA.The mRNA and pro-teins levels of Nrf2,SLC7A11,GPX4,collagen typeⅠ(COL-1),α-smooth muscle actin(α-SMA)were measured by quantitative polymerase chain reaction(qPCR)and Western blot.Results Compared with the control group,the lung function of mice was signif-icantly reduced(P＜0.01)in the BLM and PM2.5 groups,while lung tissue showed the characteristic pathological changes of pulmonary fibrosis such as a large number of inflammatory cell infiltration,alveolar wall fracture,thickening,collagen deposition,and sig-nificantly increased HYP,Fe2+,ROS,MDA(P＜0.05,P＜0.01),genes and proteins of COL-1,α-SMA(P＜0.01);and decreased GSH,Nrf2,SLC7A11,GPX4 genes and proteins(P＜0.05,P＜0.01).The above-mentioned lesions were markedly aggravated in the BLM+PM2.5 group compared with the BLM(P＜0.05)and PM2.5 groups(P＜0.01),and were also improved in the SFN group(P＜0.05,P＜0.01).Conclusions PM2.5 exposures can exac-erbate IPF-induced IPF in mice,and the regulating of Nrf2/SLC7 A1 1/GPX4 axis and ferroptosis might be in-volved in the related mechanisms.

Aim To investigate the effect of triptolide(TP)on corticosterone(CORT)-induced depression-like behaviors in mice and explore the antidepressant mechanism of TP based on the CREB/BDNF/TrkB sig-naling pathway.Methods Sixty 8-week-old male C57BL/6J mice were randomly divided into five groups:control group,CORT group,TP groups of low and high doses(10,30 μg·kg-1),and fluoxetine(FLU)group(10 mg·kg-1).Except for the control group,the other groups received subcutaneous injec-tions of CORT for three consecutive weeks to establish the model of depression.During the last two weeks of modeling,normal saline,TP and FLU were adminis-tered via intraperitoneal injection respectively.After the administration,depression-like behaviors in mice were assessed using forced swimming test,tail suspen-sion test,and sucrose preference test.Biochemical methods were used to measure the levels of SOD and MDA in the hippocampus and prefrontal cortex(PFC).Cell apoptosis was detected by TUNEL meth-od.Immunohistochemistry,immunofluorescence,and Western blotting were employed to detect the expres-sion of apoptosis/autophagy-related proteins,synaptic structure markers,and proteins related to the CREB/BDNF/TrkB signaling pathway.Results TP signifi-cantly ameliorated CORT-induced depression-like be-haviors in mice,mainly manifested by reduced immo-bility time in the tail suspension test and forced swim-ming test,and increased sucrose preference rate.TP alleviated CORT-induced oxidative stress by increasing SOD levels and reducing MDA production in brain tis-sue.Additionally,TP also inhibited apoptosis and ex-cessive autophagy of neurons in the hippocampus and prefrontal cortex,maintained synaptic plasticity,and significantly upregulated the expression of p-CREB,BDNF,and TrkB.Conclusions TP exhibits potential antidepressant effect in mice by upregulating the CREB/BDNF/TrkB signaling pathway,reducing oxida-tive stress,inhibiting excessive neuronal apoptosis and autophagy,and improving synaptic plasticity.

Aim To investigate the effect of triptolide(TP)on corticosterone(CORT)-induced depression-like behaviors in mice and explore the antidepressant mechanism of TP based on the CREB/BDNF/TrkB sig-naling pathway.Methods Sixty 8-week-old male C57BL/6J mice were randomly divided into five groups:control group,CORT group,TP groups of low and high doses(10,30 μg·kg-1),and fluoxetine(FLU)group(10 mg·kg-1).Except for the control group,the other groups received subcutaneous injec-tions of CORT for three consecutive weeks to establish the model of depression.During the last two weeks of modeling,normal saline,TP and FLU were adminis-tered via intraperitoneal injection respectively.After the administration,depression-like behaviors in mice were assessed using forced swimming test,tail suspen-sion test,and sucrose preference test.Biochemical methods were used to measure the levels of SOD and MDA in the hippocampus and prefrontal cortex(PFC).Cell apoptosis was detected by TUNEL meth-od.Immunohistochemistry,immunofluorescence,and Western blotting were employed to detect the expres-sion of apoptosis/autophagy-related proteins,synaptic structure markers,and proteins related to the CREB/BDNF/TrkB signaling pathway.Results TP signifi-cantly ameliorated CORT-induced depression-like be-haviors in mice,mainly manifested by reduced immo-bility time in the tail suspension test and forced swim-ming test,and increased sucrose preference rate.TP alleviated CORT-induced oxidative stress by increasing SOD levels and reducing MDA production in brain tis-sue.Additionally,TP also inhibited apoptosis and ex-cessive autophagy of neurons in the hippocampus and prefrontal cortex,maintained synaptic plasticity,and significantly upregulated the expression of p-CREB,BDNF,and TrkB.Conclusions TP exhibits potential antidepressant effect in mice by upregulating the CREB/BDNF/TrkB signaling pathway,reducing oxida-tive stress,inhibiting excessive neuronal apoptosis and autophagy,and improving synaptic plasticity.

Aim To explore the mechanisms of PM2.5 exposure exacerbating bleomycin(BLM)-induced idio-pathic pulmonary fibrosis(IFP)by regulating ferropto-sis via nuclear factor 2 related factor 2(Nrf2)/solute carrier family 7 member 11(SLC7A11)/glutathione peroxidase(GPX)4 axis.Methods Forty C57BL/6J mice were randomized into the control,BLM,PM2.5,BLM+PM2.5 and sulforaphane(SFN,Nrf2 agonist)groups,with eight mice in each group.PM2.5 expo-sures were conducted to the BLM-induced IPF mice for two weeks.The lung function was measured,and the content of hydroxyproline(HYP)in lung tissue and the pathomorphology of lungs were observed.Reactive oxygen species(ROS),malondialdehyde(MDA),ferrous ion(Fe2+)and glutathione(GSH)of the lung tissue were measured by ELISA.The mRNA and pro-teins levels of Nrf2,SLC7A11,GPX4,collagen typeⅠ(COL-1),α-smooth muscle actin(α-SMA)were measured by quantitative polymerase chain reaction(qPCR)and Western blot.Results Compared with the control group,the lung function of mice was signif-icantly reduced(P＜0.01)in the BLM and PM2.5 groups,while lung tissue showed the characteristic pathological changes of pulmonary fibrosis such as a large number of inflammatory cell infiltration,alveolar wall fracture,thickening,collagen deposition,and sig-nificantly increased HYP,Fe2+,ROS,MDA(P＜0.05,P＜0.01),genes and proteins of COL-1,α-SMA(P＜0.01);and decreased GSH,Nrf2,SLC7A11,GPX4 genes and proteins(P＜0.05,P＜0.01).The above-mentioned lesions were markedly aggravated in the BLM+PM2.5 group compared with the BLM(P＜0.05)and PM2.5 groups(P＜0.01),and were also improved in the SFN group(P＜0.05,P＜0.01).Conclusions PM2.5 exposures can exac-erbate IPF-induced IPF in mice,and the regulating of Nrf2/SLC7 A1 1/GPX4 axis and ferroptosis might be in-volved in the related mechanisms.

Purpose::This study evaluated the methods and clinical effects of multidisciplinary collaborative treatment for occlusal reconstruction in patients with old jaw fractures and dentition defects.Methods::Patients with old jaw fractures and dentition defects who underwent occlusal reconstruction at the Third Affiliated Hospital of Air Force Military Medical University from January 2018 to December 2022 were enrolled. Clinical treatment was classified into 3 phases. In phase I, techniques such as orthognathic surgery, microsurgery, and distraction osteogenesis were employed to reconstruct the correct 3-dimensional (3D) jaw position relationship. In phase II, bone augmentation and soft tissue management techniques were utilized to address insufficient alveolar bone mass and poor gingival soft tissue conditions. In phase III, implant-supported overdentures or fixed dentures were used for occlusal reconstruction. A summary of treatment methods, clinical efficacy evaluation, comparative analysis of imageological examinations, and satisfaction questionnaire survey were utilized to evaluate the therapeutic efficacy in patients with traumatic old jaw fractures and dentition defects. All data are summarized using the arithmetic mean ± standard deviation and compared using independent sample t-tests. Results::In 15 patients with old jaw fractures and dentition defects (an average age of 32 years, ranging from 18 to 53 years), there were 7 cases of malocclusion of single maxillary fracture, 6 of malocclusion of single mandible fracture, and 2 of malocclusion of both maxillary and mandible fractures. There were 5 patients with single maxillary dentition defects, 2 with single mandibular dentition defects, and 8 with both maxillary and mandibular dentition defects. To reconstruct the correct 3D jaw positional relationship, 5 patients underwent Le Fort I osteotomy of the maxilla, 3 underwent bilateral sagittal split ramus osteotomy of the mandible, 4 underwent open reduction and internal fixation for old jaw fractures, 3 underwent temporomandibular joint surgery, and 4 underwent distraction osteogenesis. All patients underwent jawbone augmentation, of whom 4 patients underwent a free composite vascularized bone flap (26.66%) and the remaining patients underwent local alveolar bone augmentation. Free gingival graft and connective tissue graft were the main methods for soft tissue augmentation (73.33%). The 15 patients received 81 implants, of whom 11 patients received implant-supported fixed dentures and 4 received implant-supported removable dentures. The survival rate of all implants was 93.82%. The final imageological examination of 15 patients confirmed that the malocclusion was corrected, and the clinical treatment ultimately achieved occlusal function reconstruction. The patient satisfaction questionnaire survey showed that they were satisfied with the efficacy, phonetics, aesthetics, and comfort after treatment.Conclusion::Occlusal reconstruction of old jaw fractures and dentition defects requires a phased sequential comprehensive treatment, consisting of 3D spatial jaw correction, alveolar bone augmentation and soft tissue augmentation, and implant-supported occlusal reconstruction, achieving satisfactory clinical therapeutic efficacy.

Objective To design a novel oxygenator to solve the existing problems of extracorporeal membrane oxygenation(ECMO)machine in high transmembrane pressure difference,low efficiency of blood oxygen exchange and susceptibility to thrombosis.Methods The main body of the oxygenator vascular access flow field was gifted with a flat cylindrical shape.The topology of the vascular access was modeled in three dimensions,and the whole flow field was cut into a blood inlet section,an inlet buffer,a heat exchange zone,a blood oxygen exchange zone,an outlet buffer and a blood outlet section.The oxygenator was compared with Quadrox oxygenator by means of ANSYS FLUENT-based simulation and prototype experiments.Results Simulation calculations showed the oxygenator designed was comparable to the clinically used ones in general,and gained advantages in transmembrane pressure difference,blood oxygen exchange and flow uniformity.Experimental results indicated that the oxygenator behaved better than Quadrox oxygenator in transmembrane pressure difference and blood oxygen exchange.Conclusion The oxygenator has advantages in transmem-brane pressure difference,temperature change,blood oxygen ex-change and low probability of thrombosis.[Chinese Medical Equipment Journal,2024,45(3):23-28]

Clostridium perfringens is an important foodborne pathogen that causes intestinal infections and tissue necrosis in both human and animals.A variety of exotoxins it produces are lethal.The increasing demand for ratio-nal use of antimicrobial agents and healthy farming make the implementation of vaccination critically important.H owever,traditional Clostridium perfringens exotoxin vaccines may have problems such as inconsistent efficacy,residual toxins and formaldehyde,raising concerns about the safety of these vaccines.This article systematically in-troduces the latest research progress in traditional toxoid vaccine,genetically engineered recombinant vaccines,and epitope peptide vaccines designed based on reverse vaccinology and immunoinformatics for Clostridium perfringens,providing new ideas for the development and preparation of effective and safe novel Clostridium perfringens toxin vaccines.

ObjectiveAngle-closure glaucoma (ACG) is one of the major eye-blinding diseases. To diagnose ACG, it is crucial to examine the anterior chamber angle. Current diagnostic tools include slit lamp gonioscopy, water gonioscopy, ultrasound biomicroscopy (UBM), and anterior segment optical coherence tomography (AS-OCT). Slit lamp and water gonioscopy allow convenient observation of the anterior chamber angle, but pose risks of invasive operation and eye infections. UBM can accurately measure the structure of the anterior chamber angle. However, it is complex to operate and unsuitable for patients, who have undergone trauma or ocular surgery. Although AS-OCT provides detailed images, it is costly. The aim of this study is to explore a non-invasive, non-destructive optical reflection tomography (ORT) technique. This technique can achieve low-cost three-dimensional imaging and full-field anterior chamber angle measurement of the porcine eye. MethodsThe experiment involved assembling an optical reflection tomography system, which included a complementary metal oxide semiconductor (CMOS) camera, a telecentric system, a stepper motor, and a white light source, achieving a spatial resolution of approximately 8.5 μm. The process required positioning the porcine eye at the center of the field of the imaging system and rotating it around its central axis using a stepper motor. Reflection projection images were captured at each angle with an exposure time of 1.0 ms and an interval of 2°. The collected reflection-projection data were processed using a filtered reflection tomography algorithm, generating a series of two-dimensional slice data. These slices essentially represented cross-sectional views of the three-dimensional structural image, and were reconstructed into a complete three-dimensional structural image. Based on the reconstructed three-dimensional structural image of the porcine eye, the anterior chamber angles at different positions were measured, and a distribution map of these angles was drawn. Simultaneously, the ORT measurements were compared with the standard results obtained from optical coherence tomography (OCT) to assess the accuracy of ORT measurements. ResultsIn this study, we successfully obtained the reflection projection data of a porcine eye using ORT technology, reconstructed its three-dimensional structural image, and measured the anterior chamber angle, generating the corresponding distribution map. To better distinguish the different structural parts of porcine eye, the three-dimensional structural image was marked with blue, green, and yellow dashed lines from the outer to the inner layers. The area between the blue and green dashed lines corresponded to the sclera. The area between the green and yellow dashed lines corresponded to the iris. The area inside the yellow dashed line corresponded to the pupil. The three-dimensional structural image clearly revealed the key anatomical features of the porcine eye. It was able to measure the anterior chamber angle at different positions. Additionally, the anterior chamber angle measurements of the porcine eye using ORT were compared with the measurements obtained using a TEL320C1 type OCT system, showing an average deviation of 0.51° and a mean square error MSE of 0.317. ConclusionORT is a non-invasive, non-destructive, low-cost, and high-resolution imaging technique capable of achieving three-dimensional structural imaging and full-field anterior chamber angle measurement of a porcine eye. This technology offers a new perspective for the diagnosis of angle-closure glaucoma and is significant for the screening, diagnosis, and monitoring of eye diseases, potentially benefiting clinics and small hospitals in remote areas in the future.