Objective: To investigate the regional differences in the incidence of urothelial carcinoma among kidney transplant recipients between northern and southern China，so as to provide reference for early diagnosis of this disease. Methods: A comprehensive search was conducted across multiple databases，including CNKI，Wanfang，CBM，and PubMed，using the keywords “kidney transplantation” and “tumor” to collect clinical data from qualified kidney transplant centers.The latest and most complete literature data published by 17 transplant centers in northern China and 14 in southern China were included.Statistical analyses were performed to compare the incidence of post-transplant urothelial carcinoma and non-urothelial malignancies. Results: A total of 37 475 kidney transplant recipients were included，among whom 837 (2.23%) developed post-transplant malignancies，including urothelial carcinoma (366/837，43.73%)，non-urothelial carcinoma (444/837，53.05%)，and malignancies with unspecified pathology (27/837，3.23%).The incidence of malignancies was significantly higher in northern China than in southern China [(2.82±1.39)% vs. (1.67±0.83)%，P=0.011]，with a particularly pronounced difference in the incidence of urothelial carcinoma [(1.68±1.12)% vs. (0.32±0.32)%，P<0.001].No significant difference was observed in the incidence of non-urothelial carcinoma between the two regions [(1.11±0.56)% vs. (1.35±0.65)%，P=0.279].Additionally，female transplant recipients exhibited a higher incidence of malignancies than males in both regions (southern China：2.38% vs. 1.80%; northern China：8.93% vs. 2.52%). Conclusion: The incidence of urothelial carcinoma following kidney transplantation is significantly higher in northern China than in southern China，underscoring the importance of implementing regular tumor screening for kidney transplant recipients，particularly for female patients in northern China，to facilitate early diagnosis and timely intervention.

Background: En bloc resection is recommended for the treatment of malignant and aggressive benign spinal tumors; however, it often requires a combined anterior-posterior approach, which is usually accompanied by longer surgical duration, increased blood loss, larger trauma, and surgical complexity. The present study describes a novel rotation-reversion technique for en bloc resection of the thoracic and upper lumbar spinal tumors using a posterior-only approach and evaluate its safety and efficacy. Methods: Thirteen patients with thoracic and upper lumbar (L1-L3) spinal tumors were treated with en bloc resection using the rotation-reversion technique through a posterior-only approach at our institution between 2015 and 2023. The clinical characteristics and surgical results of the patients were reviewed and analyzed. Results: Posterior-only en bloc resection was performed successfully in all 13 patients using the rotation-reversion technique, with a median follow-up of 30.4 months (range, 6–74 months). The average maximum size of these 13 tumors was 5.7 × 5.8 × 4.8 cm.The mean operation time and blood loss were 458.5 minutes (range, 220–880 minutes) and 3,146.2 mL (range, 1,000–6,000 mL), respectively, with 4 of the 13 patients (30.8%) experiencing perioperative complications. Negative margins were achieved in all the 13 patients (100%). One patient experienced local recurrence (7.7%) and 1 patient experienced instrumentation failures. Interbody fusion was confirmed in 11 of the 13 patients (84.6%), with a median fusion time of 6.9 months. All of the 13 patients experienced varying degrees of mild postoperative neurological deficits owing to resection of the nerve roots affected by tumor invasion of the vertebrae. No vessel injury or postoperative neurological paralysis occurred, except 1 patient who had been completely paralyzed before surgery. Conclusions The rotation-reversion technique is an effective procedure for en bloc resection of selected thoracic and upper lumbar spinal tumors through the posterior-only approach.

Background: En bloc resection is recommended for the treatment of malignant and aggressive benign spinal tumors; however, it often requires a combined anterior-posterior approach, which is usually accompanied by longer surgical duration, increased blood loss, larger trauma, and surgical complexity. The present study describes a novel rotation-reversion technique for en bloc resection of the thoracic and upper lumbar spinal tumors using a posterior-only approach and evaluate its safety and efficacy. Methods: Thirteen patients with thoracic and upper lumbar (L1-L3) spinal tumors were treated with en bloc resection using the rotation-reversion technique through a posterior-only approach at our institution between 2015 and 2023. The clinical characteristics and surgical results of the patients were reviewed and analyzed. Results: Posterior-only en bloc resection was performed successfully in all 13 patients using the rotation-reversion technique, with a median follow-up of 30.4 months (range, 6–74 months). The average maximum size of these 13 tumors was 5.7 × 5.8 × 4.8 cm.The mean operation time and blood loss were 458.5 minutes (range, 220–880 minutes) and 3,146.2 mL (range, 1,000–6,000 mL), respectively, with 4 of the 13 patients (30.8%) experiencing perioperative complications. Negative margins were achieved in all the 13 patients (100%). One patient experienced local recurrence (7.7%) and 1 patient experienced instrumentation failures. Interbody fusion was confirmed in 11 of the 13 patients (84.6%), with a median fusion time of 6.9 months. All of the 13 patients experienced varying degrees of mild postoperative neurological deficits owing to resection of the nerve roots affected by tumor invasion of the vertebrae. No vessel injury or postoperative neurological paralysis occurred, except 1 patient who had been completely paralyzed before surgery. Conclusions The rotation-reversion technique is an effective procedure for en bloc resection of selected thoracic and upper lumbar spinal tumors through the posterior-only approach.

Background: En bloc resection is recommended for the treatment of malignant and aggressive benign spinal tumors; however, it often requires a combined anterior-posterior approach, which is usually accompanied by longer surgical duration, increased blood loss, larger trauma, and surgical complexity. The present study describes a novel rotation-reversion technique for en bloc resection of the thoracic and upper lumbar spinal tumors using a posterior-only approach and evaluate its safety and efficacy. Methods: Thirteen patients with thoracic and upper lumbar (L1-L3) spinal tumors were treated with en bloc resection using the rotation-reversion technique through a posterior-only approach at our institution between 2015 and 2023. The clinical characteristics and surgical results of the patients were reviewed and analyzed. Results: Posterior-only en bloc resection was performed successfully in all 13 patients using the rotation-reversion technique, with a median follow-up of 30.4 months (range, 6–74 months). The average maximum size of these 13 tumors was 5.7 × 5.8 × 4.8 cm.The mean operation time and blood loss were 458.5 minutes (range, 220–880 minutes) and 3,146.2 mL (range, 1,000–6,000 mL), respectively, with 4 of the 13 patients (30.8%) experiencing perioperative complications. Negative margins were achieved in all the 13 patients (100%). One patient experienced local recurrence (7.7%) and 1 patient experienced instrumentation failures. Interbody fusion was confirmed in 11 of the 13 patients (84.6%), with a median fusion time of 6.9 months. All of the 13 patients experienced varying degrees of mild postoperative neurological deficits owing to resection of the nerve roots affected by tumor invasion of the vertebrae. No vessel injury or postoperative neurological paralysis occurred, except 1 patient who had been completely paralyzed before surgery. Conclusions The rotation-reversion technique is an effective procedure for en bloc resection of selected thoracic and upper lumbar spinal tumors through the posterior-only approach.

Background: En bloc resection is recommended for the treatment of malignant and aggressive benign spinal tumors; however, it often requires a combined anterior-posterior approach, which is usually accompanied by longer surgical duration, increased blood loss, larger trauma, and surgical complexity. The present study describes a novel rotation-reversion technique for en bloc resection of the thoracic and upper lumbar spinal tumors using a posterior-only approach and evaluate its safety and efficacy. Methods: Thirteen patients with thoracic and upper lumbar (L1-L3) spinal tumors were treated with en bloc resection using the rotation-reversion technique through a posterior-only approach at our institution between 2015 and 2023. The clinical characteristics and surgical results of the patients were reviewed and analyzed. Results: Posterior-only en bloc resection was performed successfully in all 13 patients using the rotation-reversion technique, with a median follow-up of 30.4 months (range, 6–74 months). The average maximum size of these 13 tumors was 5.7 × 5.8 × 4.8 cm.The mean operation time and blood loss were 458.5 minutes (range, 220–880 minutes) and 3,146.2 mL (range, 1,000–6,000 mL), respectively, with 4 of the 13 patients (30.8%) experiencing perioperative complications. Negative margins were achieved in all the 13 patients (100%). One patient experienced local recurrence (7.7%) and 1 patient experienced instrumentation failures. Interbody fusion was confirmed in 11 of the 13 patients (84.6%), with a median fusion time of 6.9 months. All of the 13 patients experienced varying degrees of mild postoperative neurological deficits owing to resection of the nerve roots affected by tumor invasion of the vertebrae. No vessel injury or postoperative neurological paralysis occurred, except 1 patient who had been completely paralyzed before surgery. Conclusions The rotation-reversion technique is an effective procedure for en bloc resection of selected thoracic and upper lumbar spinal tumors through the posterior-only approach.

High-performance liquid chromatography(HPLC) was used to determine the content of three major components in Citri Reticulatae Semen(CRS), including limonin, nomilin, and obacunone. The chromaticity of the CRS sample during salt processing and stir-frying was measured using a color difference meter. Next, the relationship between the color and content of the salt-processed CRS sample was investigated through correlation analysis. By integrating the oil bath technique for processing simulation with HPLC, the changes in the relative content of nomilin and its transformation products were analyzed, with its structural transformation pattern during processing identified. Additionally, RAW264.7 cells were induced with lipopolysaccharides(LPSs) to establish an inflammatory model, and the anti-inflammatory activity of nomilin and its transformation product, namely obacunone was evaluated. The results indicated that as processing progressed, E~*ab and L~* values showed a downward trend; a~* values exhibited a slow increase over a certain period, followed by no significant changes, and b~* values remained stable with no significant changes over a certain period and then started to decrease. The limonin content remained barely unchanged; the nomilin content decreased, and the obacunone increased significantly. The changing trends in content and color parameters during salt-processing and stir-frying were basically consistent. The content of nomilin and obacunone was significantly correlated with the colorimetric values(L~*, a~*, b~*, and E~*ab), while limonin content showed no significant correlation with these values. By analyzing HPLC patterns of nomylin at different heating temperatures and time, it was found that under conditions of 200-250 ℃ for heating of 5-60 min, the content of nomilin significantly decreased, while the obacunone content increased pronouncedly. The in vitro anti-inflammatory activity results indicated that compared to the model group, the group with a high concentration of nomilin and the groups with varying concentrations of obacunone showed significantly reduced release of nitric oxide(NO)(P<0.01). When both were at the same concentration, obacunone showed better performance in inhibiting NO release. In this study, the obvious correlation between the color and content of major components during the processing of CRS samples was identified, and the dynamic patterns of quality change in CRS samples during processing were revealed. Additionally, the study revealed and confirmed the transformation of nomilin into obacunone during processing, with the in vitro anti-inflammatory activity of obacunone significantly greater than that of nomilin. These findings provided a scientific basis for CRS processing optimization, tablet quality control, and its clinical application.
Mice ; Animals ; Drugs, Chinese Herbal/pharmacology* ; RAW 264.7 Cells ; Limonins/chemistry* ; Chromatography, High Pressure Liquid ; Citrus/chemistry* ; Color ; Benzoxepins/chemistry* ; Anti-Inflammatory Agents/chemistry*

The manufacturing process is crucial for ensuring the safety and efficacy of traditional Chinese medicine(TCM) preparations. Using advanced technologies, innovative methods, and new equipment tailored for TCM to enhance the quality control of TCM preparations in the manufacturing process helps to ensure the product quality and foster high-quality development of the TCM industry. Upon current technical requirements, such as Guideline for Studies on Pharmaceutical Changes in Marketed Traditional Chinese Medicine Preparations(Trial) and Guideline for Study on Quality Control in Manufacturing Process of Oral Traditional Chinese Medicine Preparations(Trial), this paper analyzes the characteristics and current development of quality control in the manufacturing process of TCM preparations. It also discusses the significant roles that quality control in manufacturing process plays in ensuring the quality consistency and in the evaluation and decision-making of changes in marketed TCM preparations. Furthermore, to benefit the high-quality development of the TCM industry, this paper offers recommendations for improving quality control of TCM preparations in the manufacturing process and implementing new technologies and methods.
Quality Control ; Drugs, Chinese Herbal/chemistry* ; Medicine, Chinese Traditional/standards* ; Decision Making ; Humans

The chemical constituents from Cephalotaxus lanceolata were isolated and purified by using multiple chromatographic techniques, including octadecylsilane(ODS), silica gel, Sephadex LH-20 column chromatography, and semi-preparative high-performance liquid chromatography(HPLC). A total of 17 compounds obtained were identified by using spectroscopic methods such as nuclear magnetic resonance(NMR), mass spectrometry(MS), and ultraviolet(UV) combined with literature data. Compound 1 was a new alkaloid dimer, named cephalancetine E. The known compounds were determined as cephalancetine A(2), 11-hydroxycephalotaxine(3), 4-hydroxycephalotaxine(4), cephalotaxine(5), epicephalotaxine(6), cephalotaxine β-N-oxide(7), acetylcephalotaxine(8), cephalotine A(9), cephalotine B(10), 11-hydroxycephalotaxine hemiketal(11), 3-deoxy-3,11-epoxy-cephalotaxine(12), cephalotaxinone(13), isocephalotaxinone(14), 2,11-epoxy-1,2-dihydro-8-oxo-cephalotaxine(15), cephalotaxamide(16), and drupacine(17), respectively. Compounds 11, 12, and 15 were isolated from the Cephalotaxus genus for the first time. The biological activity was tested for compounds 1-17. The results reveal that compound 17 displays potent inhibitory activities against three human cancer cell lines(HepG-2, MCF-7, and SH-SY5Y).
Cephalotaxus/chemistry* ; Humans ; Cell Line, Tumor ; Drugs, Chinese Herbal/pharmacology* ; Harringtonines/pharmacology* ; Molecular Structure ; Dimerization ; Alkaloids/isolation & purification* ; Magnetic Resonance Spectroscopy

This study compared the differences in intestinal absorption characteristics of eleven active components in Rubus multibracteatus(RM) extract(protocatechuic acid, tiliroside, scutellarin, luteoloside, astragalin, epicatechin, catechin, xanthotoxin, p-coumaric acid, caffeic acid, and apigenin-7-O-glucuronide) between normal rats and inflammatory pain model rats using the in-vitro everted intestinal sac model. The RM extract was administered at absorption concentrations of 25.0, 50.0, and 100.0 mg·mL~(-1). The contents of the eleven components in intestinal absorption solution samples were quantified by ultra-performance liquid chromatography-tandem mass spectrometry(UPLC-MS/MS), and their cumulative absorption(Q) and absorption rate constant(K_a) were calculated to evaluate the absorption characteristics of these components in normal rats and inflammatory pain model rats. The results show that except for catechin, epicatechin, and caffeic acid, the cumulative absorption-time curves of the other eight components(protocatechuic acid, tiliroside, scutellarin, luteoloside, astragalin, xanthotoxin, p-coumaric acid, and apigenin-7-O-glucuronide) exhibit an upward trend without saturation, with correlation coefficients(R~2) all > 0.9, indicating linear absorption. However, the overall absorption of all components is not dose-dependent with increasing concentration, suggesting that their absorption mechanisms are not solely passive diffusion. In both normal and model rats, the jejunum shows the highest absorption for all components except xanthotoxin. The overall absorption of seven components(excluding protocatechuic acid, caffeic acid, apigenin-7-O-glucuronide, and luteoloside) in normal rats is better than that in model rats across all intestinal segments. These findings indicate that the pathological state of inflammatory pain alters the intestinal absorption of RM extract, and its mechanism needs further investigation.
Animals ; Rats ; Intestinal Absorption/drug effects* ; Male ; Rats, Sprague-Dawley ; Drugs, Chinese Herbal/metabolism* ; Disease Models, Animal ; Pain/metabolism* ; Intestines/drug effects* ; Intestinal Mucosa/metabolism*

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome