BACKGROUND:The pelvis has abundant trabecular bone content,but the ability of conventional sacroiliac percutaneous fixation to control trabecular bone is limited,leading to fixation failure.Therefore,the development of devices that can more effectively control trabecular bone tension is of significant importance.OBJECTIVE:The mechanical properties of a novel sacroiliac tension screw were investigated using biomechanical testing and numerical modeling analysis,along with an assessment of the reliability of the pull-out force numerical model.METHODS:A mechanical model was established based on the working principle of the novel sacroiliac tension screw.Numerical methods were employed to analyze its pull-out performance,validated through mechanical testing with polyurethane material to assess the reliability of the pull-out force numerical model.Using pelvic specimens,the mechanical effectiveness of the novel sacroiliac tension screw in repairing sacroiliac joint injuries was analyzed under normal standing posture,along with an evaluation of the load stiffness of different pelvic models in the standing position.RESULTS AND CONCLUSION:(1)The average error between the computed values of the numerical model and the measured values was 13.19％,indicating a certain level of validity for the numerical model.(2)The damage to the polyurethane material after the extraction of the screw was less pronounced in the novel screw group.(3)The average effective holding displacement for the novel screw was approximately(9.24±0.27)mm,significantly greater than the average displacement of(1.71±0.57)mm observed with the lag screws.However,the maximum resistance to pullout for the lag screws was significantly higher than that for the novel screws.(4)The novel screw effectively repaired sacroiliac joint injuries.(5)The stiffness after repair of sacroiliac joint injuries was equivalent when using a single novel screw compared to using two lag screws.(6)These results prove that the theoretical model for the maximum resistance to pullout of the screws established in this study has a certain level of validity and can guide the design of them with improved mechanical performance.The novel sacroiliac spiral blade screw can effectively hold trabecular bone and has practical clinical utility.

Autism spectrum disorder(ASD),characterized by unknown etiology and high heterogeneity,ne-cessitates precise diagnostic and intervention strategies.Neuroimaging techniques have shown great promise in un-covering the neural mechanisms of ASD,providing a foundation for aided diagnosis and transcranial magnetic stim-ulation(TMS)interventions.This review highlights that integrating multimodal neuroimaging and developing indi-vidualized indices with developmental specificity can significantly improve the accuracy of ASD diagnosis and clas-sification.Furthermore,TMS interventions guided by functional connectivity derived from functional magnetic reso-nance imaging(fMRI)offer a personalized approach to ASD treatment.

This study explored the drying kinetics of Salviae Miltiorrhizae Radix et Rhizoma(SM), established the suitable models simulating the drying kinetics, and then analyzed the dynamic changes of active components during the drying processes with different methods, aiming to provide a basis for the establishment of suitable drying methods and the quality control of SM. The drying kinetics were studied based on the drying curve, drying rate, moisture effective diffusion coefficient, and drying activation energy, and the appropriate drying kinetics model of SM was established. The drying performance of different methods, such as hot air drying, infrared drying, and microwave drying of SM was evaluated, and the changes in the content of 10 salvianolic acids and 6 tanshinones during drying were analyzed by UPLC-TQ-MS. The Technique for Order Preference by Similarity to an Ideal Solution(TOPSIS) was employed to evaluate the quality of SM dried with different methods. The results showed that the drying rate and moisture effective diffusion coefficient of SM increased with the rise in drying temperature, and the maximum drying rates of different methods were in the order of microwave drying > infrared drying > hot air drying, slice > whole root. The drying rate decreased with the rise in temperature and the extension of drying time. The activation energy of hot air drying was higher than that of infrared drying in SM. The most suitable model for simulating the drying process of SM was the Page model. The TOPSIS results suggested infrared drying at 50 ℃ was the optimal drying method for SM. During the drying process, the content of salvianolic acids increased in different degrees with the loss of moisture, among which salvianolic acid B showed the largest increase of 44 times compared with that in the fresh medicinal material. Tanshinones also existed in the fresh herb of SM, and the content of tanshinone Ⅱ_A increased by 3 times after drying. The results provided a basis for the establishment of suitable drying methods and the quality control of SM.
Salvia miltiorrhiza/chemistry* ; Desiccation/methods* ; Drugs, Chinese Herbal/chemistry* ; Rhizome/chemistry* ; Kinetics ; Quality Control ; Abietanes

OBJECTIVE: This study aimed to explore the association between body mass index (BMI) and mortality based on the 10-year population-based multicenter prospective study. METHODS: A general population-based multicenter prospective study was conducted at four sites in rural China between 2013 and 2023. Multivariate Cox proportional hazards models and restricted cubic spline analyses were used to assess the association between BMI and mortality. Stratified analyses were performed based on the individual characteristics of the participants. RESULTS: Overall, 19,107 participants with a sum of 163,095 person-years were included and 1,910 participants died. The underweight (< 18.5 kg/m ²) presented an increase in all-cause mortality (adjusted hazards ratio [ aHR] = 2.00, 95% confidence interval [ CI]: 1.66-2.41), while overweight (≥ 24.0 to < 28.0 kg/m ²) and obesity (≥ 28.0 kg/m ²) presented a decrease with an aHR of 0.61 (95% CI: 0.52-0.73) and 0.51 (95% CI: 0.37-0.70), respectively. Overweight ( aHR = 0.76, 95% CI: 0.67-0.86) and mild obesity ( aHR = 0.72, 95% CI: 0.59-0.87) had a positive impact on mortality in people older than 60 years. All-cause mortality decreased rapidly until reaching a BMI of 25.7 kg/m ² ( aHR = 0.95, 95% CI: 0.92-0.98) and increased slightly above that value, indicating a U-shaped association. The beneficial impact of being overweight on mortality was robust in most subgroups and sensitivity analyses. CONCLUSION This study provides additional evidence that overweight and mild obesity may be inversely related to the risk of death in individuals older than 60 years. Therefore, it is essential to consider age differences when formulating health and weight management strategies.
Humans ; Body Mass Index ; China/epidemiology* ; Male ; Female ; Middle Aged ; Prospective Studies ; Rural Population/statistics & numerical data* ; Aged ; Follow-Up Studies ; Adult ; Mortality ; Cause of Death ; Obesity/mortality* ; Overweight/mortality*

OBJECTIVE: To investigate the variability of bone metabolism levels among different populations and its association with knee osteoarthritis (KOA) pain. METHODS: A total of 50 people (control group) who participated in physical examination from January 2023 to June 2023 were selected, including 26 males and 24 females, wtih a mean aged of (52.14±9.04) years old ranging 41 to 65 years old. The other 50 patients with knee osteoarthritis(case group) who attended the outpatient clinic of the Orthopedics and Traumatology Department in the same time period, including 19 males and 31 females, with a mean age of (53.60±7.76) years old ranging 40 to 65 years. The two groups of Western Ontario and McMaster Universities Osteoarthritis Index(WOMAC) and bone metabolism markers, such as 25-hydroxy-cholecalciferol[25(OH)D], β-isomerized typeⅠcollagen C-telopeptide breakdown products (β-CTX), total typeⅠprocollagen N-terminal propeptide (t-PINP), osteocalcin (OC), parathormone (PTH) levels were compared. Pearson correlation analysis was used to compare the correlation between two groups of bone metabolism related markers and WOMAC. RESULTS: The WOMAC score of the case group (39.90±2.34) was higher than that of the control group (3.60±0.57), with significant difference (P<0.05). There was no significant difference between the two groups of 25 (OH)D, β-CTX and PTH (P>0.05). The t-PINP and OC of the case group were (62.90±52.40) and (19.88±10.15) ng·ml-1, respectively, and those of the control group were (38.86±10.82) and (14.90±3.62) ng·ml^-1, respectively;the t-PINP and OC of the case group were higher than those of the control group, with significant difference (P<0.05). Pearson correlation analysis showed that t-PINP was positively correlated with WOMAC pain score in the case group (r²=0.045, P<0.01). CONCLUSION Bone metabolism levels in the serum of patients with knee osteoarthritis are different from those of healthy people, and the difference between OC and t-PINP is the most obvious, and the concentration of t-PINP levels is positively correlated with pain symptoms in patients with KOA. However, the specific mechanism of correlation between the bone metabolism levels of patients with KOA and their pain symptoms needs to be further elucidated by basic experimental research as well as by enlarging the samples.
Humans ; Female ; Male ; Middle Aged ; Osteoarthritis, Knee/metabolism* ; Aged ; Adult ; Bone and Bones/metabolism* ; Pain/etiology* ; Biomarkers/metabolism*

Autism spectrum disorder(ASD),characterized by unknown etiology and high heterogeneity,ne-cessitates precise diagnostic and intervention strategies.Neuroimaging techniques have shown great promise in un-covering the neural mechanisms of ASD,providing a foundation for aided diagnosis and transcranial magnetic stim-ulation(TMS)interventions.This review highlights that integrating multimodal neuroimaging and developing indi-vidualized indices with developmental specificity can significantly improve the accuracy of ASD diagnosis and clas-sification.Furthermore,TMS interventions guided by functional connectivity derived from functional magnetic reso-nance imaging(fMRI)offer a personalized approach to ASD treatment.

BACKGROUND:The pelvis has abundant trabecular bone content,but the ability of conventional sacroiliac percutaneous fixation to control trabecular bone is limited,leading to fixation failure.Therefore,the development of devices that can more effectively control trabecular bone tension is of significant importance.OBJECTIVE:The mechanical properties of a novel sacroiliac tension screw were investigated using biomechanical testing and numerical modeling analysis,along with an assessment of the reliability of the pull-out force numerical model.METHODS:A mechanical model was established based on the working principle of the novel sacroiliac tension screw.Numerical methods were employed to analyze its pull-out performance,validated through mechanical testing with polyurethane material to assess the reliability of the pull-out force numerical model.Using pelvic specimens,the mechanical effectiveness of the novel sacroiliac tension screw in repairing sacroiliac joint injuries was analyzed under normal standing posture,along with an evaluation of the load stiffness of different pelvic models in the standing position.RESULTS AND CONCLUSION:(1)The average error between the computed values of the numerical model and the measured values was 13.19％,indicating a certain level of validity for the numerical model.(2)The damage to the polyurethane material after the extraction of the screw was less pronounced in the novel screw group.(3)The average effective holding displacement for the novel screw was approximately(9.24±0.27)mm,significantly greater than the average displacement of(1.71±0.57)mm observed with the lag screws.However,the maximum resistance to pullout for the lag screws was significantly higher than that for the novel screws.(4)The novel screw effectively repaired sacroiliac joint injuries.(5)The stiffness after repair of sacroiliac joint injuries was equivalent when using a single novel screw compared to using two lag screws.(6)These results prove that the theoretical model for the maximum resistance to pullout of the screws established in this study has a certain level of validity and can guide the design of them with improved mechanical performance.The novel sacroiliac spiral blade screw can effectively hold trabecular bone and has practical clinical utility.

Objective:To design a set of simulation system for surgical operation based on virtual reality(VR)technique and intelligent scoring functions,so as to assess its clinical application effect.Methods:The Digital Imaging and Communications in Medicine(DICOM)images of typical patients were collected.Materialise Interactive Medical Image Control System(MIMICS)software was adopted to reconstruct the three-dimensional(3D)model of diseased organs.Surgical instrument models were constructed by using 3D Max software.Unity 3D software was adopted to construct simulation system for surgical operation with VR+intelligent scoring.A total of 40 surgical resident physicians,who were employed with 3 years since 2019 in The Second Affiliated Hospital of Kunming Medical University,were selected.They were divided into observation group and control group,with 20 cases in each group.The observation group used simulation system for surgical operation to conduct intelligent scoring for cholecystectomy under laparoscope,and the control group used conventional scoring for surgical operation.The scores of surgical operation and test between the two groups were compared.Results:The mean value of surgical operation time of the observation group was(1.72±0.41)h,and the average incidence of complication was(0.03±0.02)%,both of them of the observation group were significantly lower than those of the control group[(2.25±0.42)h and(0.05±0.03)%].The differences of them between two groups were statistically significant(t=9.00,4.08,P<0.05).The test scores of surgical operation of the observation group was also significantly higher than that of the control group(t=5.26,P<0.001).Conclusion:The developed simulation system for surgical operation with VR+intelligent scoring can significantly enhance users'surgical operation skills and improve learning outcomes,which has favorable prospects in future applications.

Objective:To design a set of simulation system for surgical operation based on virtual reality(VR)technique and intelligent scoring functions,so as to assess its clinical application effect.Methods:The Digital Imaging and Communications in Medicine(DICOM)images of typical patients were collected.Materialise Interactive Medical Image Control System(MIMICS)software was adopted to reconstruct the three-dimensional(3D)model of diseased organs.Surgical instrument models were constructed by using 3D Max software.Unity 3D software was adopted to construct simulation system for surgical operation with VR+intelligent scoring.A total of 40 surgical resident physicians,who were employed with 3 years since 2019 in The Second Affiliated Hospital of Kunming Medical University,were selected.They were divided into observation group and control group,with 20 cases in each group.The observation group used simulation system for surgical operation to conduct intelligent scoring for cholecystectomy under laparoscope,and the control group used conventional scoring for surgical operation.The scores of surgical operation and test between the two groups were compared.Results:The mean value of surgical operation time of the observation group was(1.72±0.41)h,and the average incidence of complication was(0.03±0.02)%,both of them of the observation group were significantly lower than those of the control group[(2.25±0.42)h and(0.05±0.03)%].The differences of them between two groups were statistically significant(t=9.00,4.08,P<0.05).The test scores of surgical operation of the observation group was also significantly higher than that of the control group(t=5.26,P<0.001).Conclusion:The developed simulation system for surgical operation with VR+intelligent scoring can significantly enhance users'surgical operation skills and improve learning outcomes,which has favorable prospects in future applications.

Aim To investigate the protective effect of berberine(BBR)on mice with unilateral ureteral obstr-uction(UUO)and explore its mechanism.Methods C57BL/6 mice were randomly divided into the sham group,UUO group,and BBR treatment groups(50,100 and 200 mg·kg-1),with eight mice in each group.Except the sham group,the other groups were subjected to left ureteral ligation to establish the UUO model.Af-ter modeling,the mice in the sham and UUO groups were fed normal saline,and the mice in the BBR treat-ment groups were fed(50,100,200)mg·kg-1 BBR by gavage for 14 days,respectively.Biochemical analy-zer was employed to detect the levels of serum creati-nine(Scr)and blood urea nitrogen(BUN).HE,Mas-son,TUNEL and immunohistochemical staining were used to observe the pathological changes of renal tis-sue.ELISA was employed to detect the expression of pro-inflammatory cytokines in renal tissue homogenate.Western blot was used to detect the protein levels of NF-κB p65,TGF-β1 and CTGF in mouse kidney.Re-sults Compared with the UUO group,the levels of Scr and BUN in the BBR group were significantly reduced.Renal injury and interstitial fibrosis were alleviated.The expression of pro-inflammatory cytokines decreased in kidney.The expression of NF-κB p65,TGF-β1 and CTGF decreased.All results showed some degree of dose dependence.Conclusion Berberine has a sig-nificant protective effect on unilateral ureteral obstruc-tion mice,and the mechanism may be that BBR has the potential to inhibit NF-κB p65/TGF-β1/CTGF signa-ling pathway,thus reducing renal inflammation and fi-brosis.