This study aimed to investigate the effects of zidovudine (AZT) on high-fat diet (HFD)-induced metabolic disturbances in rats and its underlying mechanisms. The HFD rat model was established, and the animals were divided into the control group, the model group, and the AZT-treated group at low (25 mg/kg) and high (50 mg/kg) doses. Metabolic phenotype, hepatic lipid deposition, oxidative stress, mitochondrial function, and peroxisome proliferator-activated receptor (PPAR) signaling were evaluated. AZT treatment significantly mitigated HFD-induced body weight gain and reduced both the mass and adipocyte size of inguinal and epididymal white adipose tissues; it also enhanced metabolic flexibility and improved glucose tolerance without elevating blood lactate levels. High-dose AZT further lowered hepatic triglyceride accumulation, ameliorated steatosis, and additionally, attenuated hepatic oxidative stress by increasing superoxide dismutase (SOD) activity and decreasing malondialdehyde (MDA) levels. Western blot analysis revealed that AZT upregulated hepatic PPARα and carnitine palmitoyltransferase 1α (CPT1α), while downregulating PPARγ expression. In conclusion, AZT effectively ameliorates HFD-induced metabolic disorders without inducing mitochondrial toxicity, which may be related to the promotion of fatty acid oxidation, the reduction of oxidative stress, and the modulation of both the PPAR signaling pathway and pyrimidine metabolism.

Osteoarthritis (OA), a highly prevalent degenerative joint disease worldwide, is defined by articular cartilage degradation, abnormal bone remodeling, and persistent chronic inflammation. It severely compromises patients’ quality of life, and currently, there is no radical cure. Abnormal mechanical stress is widely regarded as a core driver of OA pathogenesis, and the exploration of mechanical signal perception and transduction mechanisms has become crucial for deciphering OA’s pathophysiological processes. Piezo1, a key mechanosensitive cation channel belonging to the Piezo protein family, has recently gained significant attention due to its pivotal role in mediating cellular responses to mechanical stimuli in joint tissues. This review systematically examines Piezo1’s expression patterns, regulatory mechanisms, and pathological functions in OA, with a particular focus on its dual roles in modulating chondrocyte homeostasis and bone metabolism disorders, while also delving into the underlying molecular signaling pathways and potential therapeutic implications. Piezo1, consisting of approximately 2 500 amino acids and forming a unique trimeric propeller-like structure, is widely expressed in chondrocytes, osteocytes, mesenchymal stem cells, and synovial cells. It exhibits permeability to cations such as Ca²⁺, K⁺, and Na⁺, and directly responds to membrane tension changes induced by mechanical stimuli like fluid shear stress and mechanical overload. In OA patients and animal models, Piezo1 expression is significantly upregulated, especially in cartilage regions subjected to abnormal mechanical stress (e.g., human temporomandibular joint cartilage). This overexpression is closely associated with aggravated cartilage degeneration, increased chondrocyte apoptosis, accelerated cellular senescence, and intensified inflammatory responses. Mechanical overload and pro-inflammatory cytokines (e.g., IL-1β) are key inducers of Piezo1 upregulation: IL-1β activates the PI3K/AKT/mTOR signaling pathway to enhance Piezo1 expression, forming a pathogenic positive feedback loop that inhibits chondrocyte autophagy, promotes apoptosis, and further accelerates joint degeneration. Mechanistically, Piezo1 mediates OA progression through multiple interconnected pathways. When activated by mechanical stress, Piezo1 triggers excessive Ca²⁺ influx, leading to endoplasmic reticulum stress (ERS) and mitochondrial dysfunction, which directly induce chondrocyte apoptosis. This process involves the activation of downstream signaling cascades such as cGAS-STING and YAP-MMP13/ADAMTS5. YAP, a transcriptional regulator, upregulates the expression of matrix metalloproteinase 13 (MMP13) and aggrecanase (ADAMTS5), thereby accelerating cartilage matrix degradation. Additionally, Piezo1-driven Ca²⁺ overload promotes the accumulation of reactive oxygen species (ROS) and upregulates senescence markers (p16 and p21), accelerating chondrocyte senescence via the p38MAPK and NF-κB pathways. Senescent chondrocytes secrete senescence-associated secretory phenotype (SASP) factors (e.g., IL-6, IL-1β), further amplifying joint inflammation. In terms of bone metabolism, Piezo1 maintains joint homeostasis by promoting the differentiation of fibrocartilage stem cells into chondrocytes and balancing bone formation and resorption through regulating the FoxC1/YAP axis and RANKL/OPG ratio. Therapeutically, targeting Piezo1 shows promising potential. Preclinical studies have demonstrated that Piezo1 inhibitors (e.g., GsMTx4) can reduce joint damage and alleviate pain in OA mice. Simultaneously, siRNA-mediated co-silencing of Piezo1 and TRPV4 (another mechanosensitive channel) decreases intracellular Ca²⁺ concentration, inhibits chondrocyte apoptosis, and promotes cartilage repair. Conditional knockout of Piezo1 using Gdf5-Cre transgenic mice alleviates cartilage degeneration in post-traumatic OA models by downregulating MMP13 and ADAMTS5 expression. Despite existing challenges, such as off-target effects of inhibitors, inefficient local drug delivery, and interindividual genetic variability, strategies like developing selective Piezo1 antagonists, optimizing targeted nanocarriers, and combining Piezo1-targeted therapy with physical therapy provide viable avenues for clinical translation. The authors propose that Piezo1 serves as a critical therapeutic target for OA, and future research should focus on deciphering its context-dependent regulatory networks, developing tissue-specific intervention strategies, and validating their efficacy and safety in clinical trials to address the unmet medical needs of OA patients.

Background Long working hours, as a common risk factor for occupational stress, is closely related to the occurrence of depressive symptoms. Understanding how long working hours affect occupational stress and depressive symptoms will inform occupational health interventions. Objective To quantify the impact of long working hours exposure on occupational stress and depressive symptoms among Internet industry employees, translate black-box outputs into actionable insights, and demonstrate the value of interpretable machine learning for early-warning occupational-health surveillance. Methods A dataset was derived from a cross-sectional survey involving 2866 internet industry employees in China. This survey was part of the project Risk Assessment Of Long Working Hour Exposure And Its Adverse Health Effects, conducted by the National Institute for Occupational Health and Poisoning Control, Chinese Center for Disease Control and Prevention, from 2021 to 2023. Working hours, occupational stress and depressive symptoms were quantified with a set of structured questionnaires including the Core Occupational Stress Scale and the Patient Health Questionnaire. Pairwise associations were screened by Mantel tests and variance-inflation factors. Key predictors identified through feature selection were fed into six machine-learning risk-prediction models. Visual interpretation was provided by feature importance, Shapley additive explanations (SHAP) and local interpretable model-agnostic explanations (LIME), while directed causal effects and intervention impacts of prolonged working hours exposure on occupational stress and depressive symptoms were dissected with causal explanation of features techniques. Results The positive rates of occupational stress and depressive symptoms among internet employees were 12.9% and 77.8% respectively. Twelve core features for occupational stress and nine for depressive symptoms were retained after selection. After these features were supplied to six predictive algorithms and evaluated on five metrics, the Light Gradient Boosting Machine (LGBM) achieved the highest accuracy—0.89 for occupational stress and 0.79 for depressive symptoms on the hold-out test set. The feature-importance rankings converged on fatigue accumulation and life satisfaction as dominant drivers for both outcomes, whereas weekly working hours and daily overtime emerged as the principal exposure-related predictors. The SHAP summary plots revealed that longer weekly hours and daily overtime systematically elevated the probability of occupational stress. The causal feature explanation further quantified that ascending one category in weekly working hours increased the probability of occupational stress by 7.04%. Conclusion Exposure to long working hours is associated with both occupational stress and depressive symptoms among internet industry employees. Interpretable machine-learning frameworks translate these associations into transparent, defensible drivers, enabling precise identification of the pivotal factors and their interplay. This evidence base equips occupational-health practitioners with actionable insights for designing targeted prevention and intervention strategies.

Objective To investigate the factors influencing international normalized ratio (INR)>3.0 in patients undergoing warfarin anticoagulation therapy after mechanical heart valve replacement. Methods A retrospective analysis was performed on the clinical data of patients who underwent mechanical heart valve replacement surgery and received warfarin anticoagulation therapy at West China Hospital of Sichuan University from January 1, 2011 to June 30, 2022. Based on the discharge INR values, patients were divided into two groups: an INR≤3.0 group and an INR>3.0 group. The factors associated with INR>3.0 at the time of discharge were analyzed. Results A total of 8901 patients were enrolled, including 3409 males and 5492 females, with a median age of 49.3 (43.5, 55.6) years. The gender, body mass index (BMI), New York Heart Association (NYHA) cardiac function grading, INR, glutamic oxaloacetic transaminase, and preoperative prothrombin time (PT) were statistically different between the two groups (P<0.05). Multivariate logistic regression analysis revealed that lower BMI, preoperative PT>15 s, and mitral valve replacement were independent risk factors for INR>3.0 at discharge (P<0.05). Conclusion BMI, preoperative PT, and surgical site are factors influencing INR>3.0 at discharge in patients undergoing warfarin anticoagulation therapy after mechanical heart valve replacement. Special attention should be given to patients with lower BMI, longer preoperative PT, and mitral valve replacement to avoid excessive anticoagulation therapy.

OBJECTIVE To evaluate the effectiveness and safety of warfarin anticoagulation therapy guided by gene test in patients undergoing left ventricular assist device （LVAD） implantation， and to analyze the influencing factors of warfarin anticoagulation efficacy. METHODS Patients who underwent LVAD implantation at the Heart and Vascular Center of Northern Jiangsu People’s Hospital from January 2023 to October 2024 and required warfarin anticoagulant therapy were selected as the study subjects. They were divided into genetic testing group （n＝51） and empirical treatment group （n＝17） based on whether they underwent CYP2C9 and VKORC1 gene test. The gene test group was given warfarin based on the predicted dose calculated by gene test， while the empirical treatment group was given warfarin by clinical doctors based on international normalized ratio （INR） experience， all patients were given warfarin once a day. Follow-up observation was conducted for 6 months to compare the effectiveness [time in therapeutic range（TTR）， the time required to reach INR for the first time， the incidence of embolic events， the incidence of INR＜1.5 events] and safety （the incidence of major and minor bleeding events，the incidence of INR＞3.5 events） of warfarin treatment between two groups of patients. According to whether the patient’s TTR was ≥60%， they were divided into TTR≥60% group （n＝20） and TTR＜60% group （n＝48）. Univariate and multivariate binary Logistic regression analysis were used to determine the factors affecting the anticoagulant effect of warfarin in patients. RESULTS The TTR of patients in the gene test group was significantly higher than that in the empirical treatment group （P＜0.05）. The incidence of INR＜1.5 events in the gene test group was significantly lower than in the empirical treatment group （P＜0.05）. The incidence of minor bleeding events and INR＞3.5 events in the gene test group were lower than in the empirical treatment group， but the difference was not statistically significant （P＞0.05）. The results of multivariate binary Logistic regression analysis showed that gene test was an independent protective factor for warfarin anticoagulant therapy [odds ratio （OR）＝10.842， 95% confidence interval （CI）： 1.211-27.037， P＝0.033]， and the combination of statins was an independent risk factor for warfarin anticoagulant therapy [OR＝0.196， 95%CI： 0.045-0.861， P＝0.031]. CONCLUSIONS Under the guidance of gene test， warfarin anticoagulation therapy for LVAD patients after implantation can improve TTR， shorten the anticoagulation target time， and has good safety； meanwhile， it should be noted that the combination of statins may enhance the anticoagulant effect of warfarin， thereby increasing the risk of bleeding in patients.

Objective To evaluate the safety and efficacy of total arterial off-pump coronary artery bypass grafting (OPCABG) using a left internal thoracic artery (LITA) combined with bilateral radial arteries (RAs). Methods We retrospectively analyzed the clinical data of patients with severe multi-vessel coronary artery disease who underwent total arterial OPCABG with a LITA and bilateral RAs at Sichuan Provincial People’s Hospital from November 2020 to April 2023. Results A total of 24 patients were included, comprising 23 males and 1 female, with a mean age of (53.63±4.33) years. The New York Heart Association (NYHA) functional class was Ⅱ to Ⅲ. The mean number of distal anastomoses was 3.17±0.38. A Y-graft was constructed in 12 patients and sequential grafting was performed in 4 patients. Concomitant procedures included coronary endarterectomy in 1 patient, intra-aortic balloon pump (IABP) implantation in 10 patients, and thymoma resection in 1 patient. The mean operative time was (308.13±30.39) min, mechanical ventilation time was (15.42±7.42) h, ICU stay was (46.08±27.32) h, and postoperative hospital stay was (11.71±1.90) d. There were no in-hospital deaths. Postoperative complications included one patient of acute renal failure and one patient of cerebral infarction. Pre-discharge color Doppler echocardiography revealed that the left ventricular end-diastolic diameter was significantly smaller than before surgery (P<0.05), while the left ventricular ejection fraction and fractional shortening were significantly higher (P<0.05). Coronary computed tomography angiography (CTA) showed that all arterial grafts were patent. During a mean follow-up of (14.58±8.75) months, no patients experienced angina recurrence or mortality. Repeat coronary CTA or angiography in 16 patients one year postoperatively confirmed that all arterial grafts remained patent. Conclusion Total arterial OPCABG using a LITA and bilateral RAs is a safe and effective treatment for patients with severe multi-vessel coronary artery disease. For high-risk patients, intraoperative IABP support is recommended.

ObjectiveTo explore the impacts of material type and loading volume of rigid containers on the hydrogen peroxide low temperature plasma sterilization of thoracoscopic instruments, to identify the best rigid containers and loading volume of thoracoscopic instruments. MethodsThoracoscopic instruments sterilized by STERRAD^® 100NX hydrogen peroxide low temperature plasma in Shanghai Pulmonary Hospital affiliated to Tongji University from August to September 2024 were selected as the research items. According to the material of rigid containers, the instruments were divided into polyethylene case group (A), stainless steel case group (B) and silicone resin case group (C). In terms of the loading volume, the rigid containers were divided into (loading capacity <80%) groups of 8, 10 and 12 instruments. The results of physical monitoring, the first type of chemical indicator card monitoring, and the five types of card luminal chemical process challenge device (PCD) monitoring of the 9 groups of A8, A10, A12, B8, B10, B12, C8, C10 and C12 were compared and evaluated. ResultsCompared to A8, A10 A12, C8, C10 or C12 groups, the thoracoscope instruments in the stainless steel containers in B8, B10 or B12 group had higher hydrogen peroxide concentrations and shorter elapsed time in the pressure check phases 1 and phases 2, with the differences statistically significant (P<0.05), followed by the silicone resin case group and the polyethylene case group. The nine groups of physical parameter monitoring, the first type of chemical indicator monitoring, and the five types of chemical PCD monitoring for lumen sterilization achieved 100% qualification rates, and there were no significant differences in the qualified rates of sterilization among the 9 groups (P>0.05). ConclusionWhen using hydrogen peroxide low temperature plasma to sterilize thoracoscopic instruments, it is recommended to use stainless steel or silicone resin rigid containers with a controlled loading capacity (≤12) to ensure optimal sterilization quality.

Objective To evaluate the effect of a multidisciplinary collaborative quality control management (hereinafter referred to as "QC management") on improving the performance of biological safety cabinets in hospital. Methods A total of 63 ClassⅡbiological safety cabinets in active use at Peking University Third Hospital were selected as the study subjects using the before-after study mode. Conventional management was implemented on the biological safety cabinets from 2018 to 2021. QC management was used in 2022. The compliance of biological safety cabinets management norm and performance differences under the two models were compared. Results The median and the 25th and 75th percentiles [M(P₂₅, P₇₅)] of the service life among these 63 biological safety cabinets were 3 (1,6) years. The overall performance pass rate and inflow velocity pass rate of biological safety cabinets were higher in the QC management than that in the conventional management (90.5% vs 65.1%, 96.8% vs 84.1%, both P<0.05). However, there was no significant difference in downflow velocity, high-efficiency particulate air filter integrity, cleanliness, airflow smoke pattern, noise, and illumination pass rates of biosafety cabinets before and after the implementation of QC management (79.4% vs 88.9%, 90.5% vs 100.0%, 96.8% vs 100.0%, 85.7% vs 100.0%, 100.0% vs 100.0%, and 85.7% vs 96.8%, respectively; all P>0.05). Conclusion sQC management improves the standardization of biological safety cabinet management and key performance indicators in hospital.

ObjectiveRecent studies have highlighted the critical role of NUDT19 in the initiation, progression, and prognosis of specific cancer types. However, its involvement in pan-cancer analysis has not been fully characterized. This study aims to systematically explore the expression patterns, clinical significance, and immune-related functions of NUDT19 in various cancer types through multi-omics analysis, further revealing its potential role in cancer, particularly its functional and therapeutic target value in leukemia. MethodsTo achieve this goal, various bioinformatics approaches were employed to evaluate the expression patterns, clinical significance, and immune-related functions of NUDT19 in tumors and normal tissues. Additionally, we analyzed the mutation characteristics of NUDT19 and its relationship with epigenetic modifications. Using the single-cell analysis tool SingleCellBase, we explored the distribution of NUDT19 across different cell subpopulations in tumors. To validate these findings, qRT-PCR was used to measure NUDT19 expression levels in specific tumor cell lines, and we established acute myeloid leukemia (AML) cell lines (HL-60 and THP-1) to conduct NUDT19 knockdown and overexpression experiments, assessing its effects on leukemia cell proliferation, apoptosis, and invasion. ResultsPan-cancer analysis revealed the dysregulated expression of NUDT19 across multiple cancer types, which was closely associated with poor prognosis, clinical staging, and diagnostic markers. Furthermore, NUDT19 was significantly correlated with tumor biomarkers, immune-related genes, and immune cell infiltration in different cancers. Mutation analysis showed that multiple mutations in NUDT19 were significantly associated with epigenetic changes. Single-cell analysis revealed the heterogeneity of NUDT19 expression in cancer cells, suggesting its potentially diverse functional roles in different cell subpopulations. qRT-PCR experiments confirmed the significant upregulation of NUDT19 in various tumor cell lines. In AML cell lines, NUDT19 knockdown led to reduced cell proliferation and invasion, with increased apoptosis, while NUDT19 overexpression significantly enhanced cell proliferation and invasion while reducing apoptosis. ConclusionThis study demonstrates the diverse roles of NUDT19 in various cancer types, with a particularly prominent functional role in leukemia. NUDT19 is not only associated with tumor initiation and progression but may also influence cancer progression through the regulation of immune microenvironment and epigenetic mechanisms. Our research highlights the potential of NUDT19 as a therapeutic target, particularly for targeted therapies in malignancies such as leukemia, with significant clinical application prospects.

Objective: To construct an index system of public health risk assessment for air pollution emergency, so as to provide a tool of evaluating the public health risks of air pollution emergency. Methods: Index system of public health risk assessment for air pollution emergency was established through literature review and group discussions. The index system was determined through two rounds of Delphi expert consultations involving specialists in environmental health, toxicology, epidemiology, health emergency response, and atmospheric monitoring. The effectiveness of the consultation was evaluated by positive coefficient, authority coefficient and coordination coefficient. The weights of index were determined using a combination weighting method of the expert scoring method and the entropy weight method. Results: Fifteen experts participated in the consultation, including 11 males and 4 females. There were 8 experts with a doctor degree, 6 experts with a master degree, 1 experts with a bachelor degree. A total of 11 experts with senior professional titles, and 4 experts with associate senior professional titles. The average work experience was (23.73±10.48) years. The expert positive coefficients for the two rounds of consultations were 83.33% and 100%, respectively. The expert authority coefficients were 0.794 and 0.811, respectively. The coefficients of variation for the importance, feasibility, and sensitivity scores of each index in the two rounds of comsultations were 0.097 to 0.352, 0.078 to 0.478, 0.115 to 0.388, and 0.049 to 0.133, 0.052 to 0.153, 0.049 to 0.178, respectively. The Kendall's coefficients of concordance were 0.237 and 0.440 (both with P<0.05) for the two rounds of consultations. The constructed assessment index system included "likelihood" "hazard" "vulnerability" "controllability" with comprehensive weights of 0.206 7, 0.059 6, 0.378 1, and 0.355 5, respectively. Among the 13 second indicators, "monitoring capability" had the highest comprehensive weight of 0.192 6. Among the 40 tertiary indicators, "real-time monitoring of atmospheric pollutants" "retrospective evaluation of early forecasting results" "types, quantities, and combined effects of atmospheric pollutants" "exposure modes of the population to atmospheric pollutants" had relatively high comprehensive weights of 0.089 5, 0.043 1, 0.041 1 and 0.040 3, respectively. Conclusion The constructed index system of public health risk assessment for air pollution emergency can be applied to the public health risk assessment for air pollution emergencies.