Objective: To explore the application effectiveness of healthcare failure mode and effect analysis (HFMEA) in optimizing intelligent blood logistics transport pathways for safety assurance. Methods: Data from 1 851 cases of intelligent blood logistics transport were collected between September 2023 and March 2025. Based on the implementation phases of HFMEA measures, the cases were divided into a control group (n=120), observation group 1 (n=219), and observation group 2 (n=1 512). Through systematic analysis of the transport processes, hazard scoring and decision tree analysis were conducted for each process, and phased optimization measures were implemented for high-risk failure modes. Results: The transport duration of intelligent blood logistics was 35.5 (20.8, 71.1) min in the control group, 25.1 (10.9, 40.7) min in observation group 1, and 9.9 (4.2, 44.5) min in observation group 2. Observation group 2 exhibited significantly shorter transport time compared to both observation group 1 and the control group, with statistically significant differences between groups (P<0.000 1). Conclusion: The implementation of HFMEA-driven measures significantly reduced intelligent blood logistics transport duration, thereby fostering the evolution of smart hospital ecosystems while enhancing healthcare service quality and operational efficiency.

Background Toluene and chlorobenzene have been designated as surrogate contaminants in the challenge test for evaluating the safety of recycling processes for food-contact recycled polyethylene terephthalate (rPET). Establishing a reliable analytical method is essential for ensuring the compliant use of rPET and safeguarding food safety. Objective To develop a rapid quantitative method for determining toluene and chlorobenzene in rPET using headspace gas chromatography-mass spectrometry (HS-GC-MS), as part of the challenge test for process safety evaluation. Methods The effects of different chromatographic columns and headspace conditions on detection of target analytes were investigated. Three columns HP-5 ms UI (30 m×0.25 mm×0.25 μm), DB-624 (30 m×0.32 mm×1.8 μm), and VF-WAXms (30 m×0.25 mm×0.25 μm) were compared for separation efficiency and peak shape. Headspace equilibration temperatures (50-100 ℃) and equilibration times (10-30 min) were evaluated to determine the optimal instrumental parameters. The effect of sample grinding on recovery was assessed to select the best pretreatment conditions. The established method was validated for selectivity, linearity, sensitivity, accuracy, and precision, and was subsequently applied to the analysis of 12 rPET samples. Results The target analytes achieved good separation and response within 15 min, under the optimized conditions using an HP-5 ms UI column, a headspace equilibration temperature of 60 ℃ and a 10 min equilibration time. Direct analysis without grinding yielded satisfactory recovery rates. Toluene and chlorobenzene showed excellent linearity (0.0030-5.0 mg·kg⁻¹, R²≥0.999). The limits of detection (LOD) and quantification (LOQ) were 0.00003 mg·kg⁻¹ and 0.00011 mg·kg⁻¹ for toluene respectively, and 0.00011 mg·kg⁻¹ and 0.00037 mg·kg⁻¹ for chlorobenzene respectively. The recoveries of the matrix spike at low and high spiking levels ranged from 88.6% to 110%, with relative standard deviations of 0.52%-4.9% (n=6). Among the 12 rPET samples from different recycling stages, three samples contained detectable levels of toluene (0.196-0.250 mg·kg⁻¹) and chlorobenzene (0.704-0.867 mg·kg⁻¹). Conclusion The proposed method is simple, rapid, highly sensitive, and accurate, making it suitable for determining toluene and chlorobenzene in food-contact rPET. It provides a robust technical approach for the safety evaluation of rPET recycling processes.

OBJECTIVE To establish a method for simultaneous determination of plasma concentration of lamotrigine（LTG）， levetiracetam（LEV） and perampanel（PER） in children with epilepsy and apply this method in clinical practice. METHODS Plasma proteins were precipitated with acetonitrile. Using PER-D 5 as internal standard， ultra-high performance liquid chromatography-tandem mass spectrometry （UPLC-MS/MS） method was adopted. The determination was performed on ACQUITY UPLC HSS T3 C 18 column with mobile phase consisted of 0.1% formic acid with 5 mmol/L ammonium acetate-acetonitrile （gradient elution） at the flow rate of 0.3 mL/min. The column temperature was 40 ℃， and sample size was 5 μL. The analysis time was 5 min. The electrospray ionization source and multiple reaction monitoring mode were used for positive ion scanning. The ion pairs used for quantitative analysis of LTG， LEV， PER and internal standard were m / z 255.9→144.9， m / z 171.1→126.1， m / z 350.1→219.0 and m / z 354.9→220.2， respectively. The steady-state trough concentrations of the aforementioned drugs in the plasma of 14 pediatric epilepsy patients receiving combination therapy were determined using the same UPLC-MS/MS method as above. RESULTS The linear ranges of LTG， LEV and PER were 0.15-24 μg/mL （ R 2 ＞0.993）， 0.312 5-50 μg/mL （ R 2 ＞0.997） and 6.25-1 000 ng/mL （ R 2 ＞0.997）， respectively. The lower limits of quantification were 0.15 μg/mL， 0.312 5 μg/mL and 6.25 ng/mL， respectively. RSDs of intraday and interday precision tests of the three drugs were no more than 9.83%， and the accuracies （relative errors） were between －9.33% and 13.72%（ n ＝6 or n ＝18）； the average extraction recovery rates were 86.4%-97.9%， and the average matrix effects were 86.9%-110.0% （ n ＝6）. The absolute values of the relative errors in the stability tests were all below 15%. The steady-state trough concentrations of LTG， LEV and PER were （5.64±4.03）μg/mL， （10.67±8.78）μg/mL and（450.20±251.27）ng/mL， respectively； the rates of achieving target trough concentrations were 71.4%， 37.5% and 84.6%， respectively. CONCLUSIONS The established UPLC-MS/MS method is specific， rapid and suitable for the plasma concentration monitoring in epileptic children receiving combination therapy.

Background Long working hours, as a common risk factor for occupational stress, is closely related to the occurrence of depressive symptoms. Understanding how long working hours affect occupational stress and depressive symptoms will inform occupational health interventions. Objective To quantify the impact of long working hours exposure on occupational stress and depressive symptoms among Internet industry employees, translate black-box outputs into actionable insights, and demonstrate the value of interpretable machine learning for early-warning occupational-health surveillance. Methods A dataset was derived from a cross-sectional survey involving 2866 internet industry employees in China. This survey was part of the project Risk Assessment Of Long Working Hour Exposure And Its Adverse Health Effects, conducted by the National Institute for Occupational Health and Poisoning Control, Chinese Center for Disease Control and Prevention, from 2021 to 2023. Working hours, occupational stress and depressive symptoms were quantified with a set of structured questionnaires including the Core Occupational Stress Scale and the Patient Health Questionnaire. Pairwise associations were screened by Mantel tests and variance-inflation factors. Key predictors identified through feature selection were fed into six machine-learning risk-prediction models. Visual interpretation was provided by feature importance, Shapley additive explanations (SHAP) and local interpretable model-agnostic explanations (LIME), while directed causal effects and intervention impacts of prolonged working hours exposure on occupational stress and depressive symptoms were dissected with causal explanation of features techniques. Results The positive rates of occupational stress and depressive symptoms among internet employees were 12.9% and 77.8% respectively. Twelve core features for occupational stress and nine for depressive symptoms were retained after selection. After these features were supplied to six predictive algorithms and evaluated on five metrics, the Light Gradient Boosting Machine (LGBM) achieved the highest accuracy—0.89 for occupational stress and 0.79 for depressive symptoms on the hold-out test set. The feature-importance rankings converged on fatigue accumulation and life satisfaction as dominant drivers for both outcomes, whereas weekly working hours and daily overtime emerged as the principal exposure-related predictors. The SHAP summary plots revealed that longer weekly hours and daily overtime systematically elevated the probability of occupational stress. The causal feature explanation further quantified that ascending one category in weekly working hours increased the probability of occupational stress by 7.04%. Conclusion Exposure to long working hours is associated with both occupational stress and depressive symptoms among internet industry employees. Interpretable machine-learning frameworks translate these associations into transparent, defensible drivers, enabling precise identification of the pivotal factors and their interplay. This evidence base equips occupational-health practitioners with actionable insights for designing targeted prevention and intervention strategies.

Severe acute pancreatitis （SAP） is closely related to dysfunction of the spleen-stomach ascent and descent. Due to the influence of modern lifestyle and dietary factors， Qi deficiency in the spleen and stomach has become the pathological basis of SAP. Its pathogenesis is characterized by dampness， heat， pathogenic factors， stasis， stagnation， obstruction， Fu-organs Qi obstruction， pathogenic excess， and healthy Qi deficiency. At different stages of the disease course of SAP， there is a focus on both pathogenic excess and healthy Qi deficiency. It is specifically manifested as Fu-organs stagnation and heat accumulation， as well as pathogenic excess and healthy Qi deficiency， during the systemic inflammatory response phase， intermingling of blood stasis and pathogenic factors， as well as Qi deficiency and blood stasis， during the infection period， and weakness of the spleen and stomach， as well as healthy Qi deficiency and lingering pathogenic factors， during the residual infection period. Based on the theory that "the spleen and stomach are the acquired foundation"， a staged treatment method centered on the core principle of "strengthening healthy Qi to eliminate pathogenic factors" was developed. The staged treatment method included "clearing the Fu-organs to expel turbidity， replenishing Qi to harmonize the stomach， activating blood circulation to expel pathogenic factors， replenishing Qi to relieve pain， promoting digestion to stimulate appetite， and replenishing Qi to invigorate the spleen". In clinical practice， Hewei Tongxie mixture， Yikang mixture， and Shiwei Jianpi Xiaoshi powder were selected for staged treatment of SAP. This article systematically summarized the theoretical basis of traditional Chinese medicine， Western medicine foundation， modern pharmacological mechanisms， and clinical application experience of the staged treatment of SAP with "strengthening the healthy Qi to eliminate pathogenic factors"， providing new ideas for the treatment of SAP with traditional Chinese medicine.

Risk prediction models for postoperative pulmonary complications (PPCs) can assist healthcare professionals in assessing the likelihood of PPCs occurring after surgery, thereby supporting rapid decision-making. This study evaluated the merits, limitations, and challenges of these models, focusing on model types, construction methods, performance, and clinical applications. The findings indicate that current risk prediction models for PPCs following lung cancer surgery demonstrate a certain level of predictive effectiveness. However, there are notable deficiencies in study design, clinical implementation, and reporting transparency. Future research should prioritize large-scale, prospective, multi-center studies that utilize multiomics approaches to ensure robust data for accurate predictions, ultimately facilitating clinical translation, adoption, and promotion.

ObjectiveTo investigate the effect and underlying mechanism of the Wulao Qisun prescription on pathological new bone formation in ankylosing spondylitis （AS）. MethodsSynovial fibroblasts were isolated from the hip joints of AS patients and observed under a microscope to assess cell morphology. The cells were identified using immunofluorescence staining. The isolated AS fibroblasts were divided into blank group， low drug-containing serum group， medium drug-containing serum group， high drug-containing serum group， and positive drug group. After drug intervention， cell proliferation was measured using the cell counting kit-8 （CCK-8） assay to observe fibroblast growth and determine the optimal intervention time. Alkaline phosphatase （ALP） activity was measured using the alkaline phosphatase assay. Protein expression of osteocalcin （OCN）， osteopontin （OPN）， and runt-related transcription factor 2 （Runx2） was detected by Western blot. The mRNA expression levels of Wnt5a， β-catenin， and Dickkopf-1 （DKK-1） were measured by real-time quantitative polymerase chain reaction （Real-time PCR）. ResultsCompared with the blank group， each drug-containing serum group of Wulao Qisun prescription and the positive drug group inhibited the proliferation of AS fibroblasts and reduced ALP expression （P<0.01）. Compared with the blank group， the low drug-containing serum group of Wulao Qisun prescription downregulated β-catenin mRNA expression （P<0.05）. The medium and high drug-containing serum groups and the positive drug group significantly downregulated Wnt5a and β-catenin mRNA expression （P<0.05， P<0.01）， with the positive drug group showing the most pronounced effect （P<0.01）. The high drug-containing serum group and the positive drug group significantly upregulated DKK-1 mRNA expression （P<0.01）. Compared with the blank group， the low drug-containing serum group of Wulao Qisun prescription inhibited the expression of OPN and Runx2 proteins （P<0.05， P<0.01）， while the medium and high drug-containing serum groups and the positive drug group inhibited the expression of OCN， OPN， and Runx2 proteins （P<0.05， P<0.01）. ConclusionThe Wulao Qisun prescription can inhibit the proliferation and osteogenic differentiation of AS fibroblasts， thereby delaying the formation of pathological new bone in AS. The possible mechanism involves the regulation of Wnt/β-catenin-related gene expression， further inhibiting the transcription of downstream target genes.

BACKGROUND:Several observational studies have found a close relationship between thyroid function levels and sarcopenia,but the causal relationship between thyroid function levels and the onset of sarcopenia is not yet clear. OBJECTIVE:To investigate the causal relationship between thyroid function levels and sarcopenia using a two sample Mendelian randomization method. METHODS:A two sample Mendelian randomization analysis was conducted using genome-wide association study data on thyrotropin,free triiodothyronine,free tetraiodothyronine,subclinical hyperthyroidism,subclinical hypothyroidism,and four related phenotypes of sarcopenia-lefthand grip strength,right hand grip strength,limb lean mass,and gait speed.The inverse-variance weighted method,weighted median method,simple mode method,weighted median estimator method,and MR Egger regression method were used as analysis methods,while heterogeneity test,pleiotropy test,MR-PRESSO,leave-one-out method,funnel plot and other methods were used for sensitivity analysis. RESULTS AND CONCLUSION:Elevated levels of thyroid-stimulating hormone increased left-(β=0.02,SE=0.01,P=0.01)and right-handed grip strength(β=0.02,SE=0.01,P=0.01),an increase in free triiodothyronine decreased left-(β=-0.06,SE=0.02,P=9.5×10-5)and right-handed grip strength(β=-0.07,SE=0.02,P=9.3×10-5),and subclinical hyperthyroidism decreased gait speed(β=-4.4×10-3,SE=1.7×10-3,P=0.01).The sensitivity analysis results were basically consistent with the main analysis results.To conclude,an increase in thyroid-stimulating hormone is a protective factor for sarcopenia,and elevation of free triiodothyronine and subclinical hyperthyroidism may increase the risk of sarcopenia.

BACKGROUND:Developmental dysplasia of the hip often leads to limb deformities in children,and the research related to its diagnosis and treatment has been gradually clarified.Recently,the finite element method has been paid attention to by scholars in the research related to developmental dysplasia of the hip because of its advantages. OBJECTIVE:Through literature search and review of the relevant research progress of finite element method in children's developmental dysplasia of the hip and treatment,analyze and summarize its advantages and disadvantages,and explore the direction of further research in the future. METHODS:PubMed,SCI,CBM,and CNKI were searched for relevant articles published from January 2014 to November 2023 with the key words of"developmental dysplasia(dislocation)of the hip,dysplasia of the hip,finite element analysis(method),pavlik harness,fixation in herringbone position,biomechanics,pelvic osteotomies,pemberton,salter,dega,periacetabular osteotomy,children"in Chinese and English.A small number of long-term articles were included,and 62 articles were finally included for analysis through screening. RESULTS AND CONCLUSION:(1)The mechanical environment of hip joint in children with developmental dysplasia of the hip was abnormal.The pressure in acetabulum was uneven.The stress increased and concentrated;the joint contact area decreased,and the local stress concentrated in femoral neck.(2)In the Pavlik sling and herringbone fixation,the mechanical environment of the hip was improved;the concentrated high stress area disappeared and the joint contact area increased,but the excessive abduction angle led to the increase of stress in the acetabulum and the lateral femoral head.(3)After pelvic osteotomy,the stress environment of hip joint and sacroiliac joint was improved.There was no single hinge in the three kinds of osteotomy,and the stress load position was different according to the age of the children.(4)After peri-acetabular osteotomy,the joint contact pressure was close to normal,but it was difficult to recover in patients with non-spherical femoral head.(5)The postoperative X-ray film findings could not show that the joint contact mechanics was the best.(6)It is indicated that the information that cannot be measured in the body can be obtained by using the finite element method,which can be operated in a virtual environment without the limitation of time and ethics.It can directly see the stress change area of normal and developmental dysplasia of the hip,explain the effectiveness of treatment from the point of view of mechanics,establish a specific finite element model and tailor-made operation plan for patients who need osteotomy.There is no standard or unified standard for the finite element modeling of developmental dysplasia of the hip and the material characteristic parameters of children's hip joint.Due to the inherent limitations of finite element method,it is impossible to analyze the model that contains bone,cartilage,ligament,muscle and other elements at the same time.The operation of finite element analysis is difficult,although it has advantages,it is not universal,and the current research sample size is small,which needs to be further expanded and verified.

Purpose: This study elucidates the mechanism of the physiological effect of cannabidiol (CBD) by assessing its impact on lipopolysaccharide (LPS)-induced inflammation in RWPE-1 cells and prostatitis-induced by 17β-estradiol and dihydrotestosterone in a rat model, focusing on its therapeutic potential for chronic prostatitis/chronic pelvic pain syndrome (CP/CPPS). Materials and Methods: RWPE-1 cells were stratified in vitro into three groups: (1) controls, (2) cells with LPS-induced inflammation, and (3) cells with LPS-induced inflammation and treated with CBD. Enzyme-linked immunosorbent assays and western blots were performed on cellular components and supernatants after administration of CBD. Five groups of six Sprague–Dawley male rats were assigned: (1) control, (2) CP/CPPS, (3) CP/CPPS and treated with 50 mg/kg CBD, (4) CP/CPPS and treated with 100 mg/kg CBD, and (5) CP/CPPS and treated with 150 mg/kg CBD. Prostatitis was induced through administration of 17β-estradiol and dihydrotestosterone. After four weeks of CBD treatment, a pain index was evaluated, and prostate tissue was collected for subsequent histologic examination and western blot analysis. Results: CBD demonstrated efficacy in vivo for CP/CPPS and in vitro for inflammation. It inhibited the toll-like receptor 4 (TLR4)uclear factor-kappa B (NF-κB) pathway by activating the CB2 receptor, reducing expression of interleukin-6, tumor necrosis factor-alpha, and cyclooxygenase-2 (COX2) (p<0.01). CBD exhibited analgesic effects by activating and desensitizing the TRPV1 receptor. Conclusions CBD inhibits the TLR4/NF-κB pathway by activating the CB2 receptor, desensitizes the TRPV1 receptor, and decreases the release of COX2. This results in relief of inflammation and pain in patients with CP/CPPS, indicating CBD as a potential treatment for CP/CPPS.