High-performance liquid chromatography(HPLC) was used to determine the content of three major components in Citri Reticulatae Semen(CRS), including limonin, nomilin, and obacunone. The chromaticity of the CRS sample during salt processing and stir-frying was measured using a color difference meter. Next, the relationship between the color and content of the salt-processed CRS sample was investigated through correlation analysis. By integrating the oil bath technique for processing simulation with HPLC, the changes in the relative content of nomilin and its transformation products were analyzed, with its structural transformation pattern during processing identified. Additionally, RAW264.7 cells were induced with lipopolysaccharides(LPSs) to establish an inflammatory model, and the anti-inflammatory activity of nomilin and its transformation product, namely obacunone was evaluated. The results indicated that as processing progressed, E~*ab and L~* values showed a downward trend; a~* values exhibited a slow increase over a certain period, followed by no significant changes, and b~* values remained stable with no significant changes over a certain period and then started to decrease. The limonin content remained barely unchanged; the nomilin content decreased, and the obacunone increased significantly. The changing trends in content and color parameters during salt-processing and stir-frying were basically consistent. The content of nomilin and obacunone was significantly correlated with the colorimetric values(L~*, a~*, b~*, and E~*ab), while limonin content showed no significant correlation with these values. By analyzing HPLC patterns of nomylin at different heating temperatures and time, it was found that under conditions of 200-250 ℃ for heating of 5-60 min, the content of nomilin significantly decreased, while the obacunone content increased pronouncedly. The in vitro anti-inflammatory activity results indicated that compared to the model group, the group with a high concentration of nomilin and the groups with varying concentrations of obacunone showed significantly reduced release of nitric oxide(NO)(P<0.01). When both were at the same concentration, obacunone showed better performance in inhibiting NO release. In this study, the obvious correlation between the color and content of major components during the processing of CRS samples was identified, and the dynamic patterns of quality change in CRS samples during processing were revealed. Additionally, the study revealed and confirmed the transformation of nomilin into obacunone during processing, with the in vitro anti-inflammatory activity of obacunone significantly greater than that of nomilin. These findings provided a scientific basis for CRS processing optimization, tablet quality control, and its clinical application.
Mice ; Animals ; Drugs, Chinese Herbal/pharmacology* ; RAW 264.7 Cells ; Limonins/chemistry* ; Chromatography, High Pressure Liquid ; Citrus/chemistry* ; Color ; Benzoxepins/chemistry* ; Anti-Inflammatory Agents/chemistry*

The manufacturing process is crucial for ensuring the safety and efficacy of traditional Chinese medicine(TCM) preparations. Using advanced technologies, innovative methods, and new equipment tailored for TCM to enhance the quality control of TCM preparations in the manufacturing process helps to ensure the product quality and foster high-quality development of the TCM industry. Upon current technical requirements, such as Guideline for Studies on Pharmaceutical Changes in Marketed Traditional Chinese Medicine Preparations(Trial) and Guideline for Study on Quality Control in Manufacturing Process of Oral Traditional Chinese Medicine Preparations(Trial), this paper analyzes the characteristics and current development of quality control in the manufacturing process of TCM preparations. It also discusses the significant roles that quality control in manufacturing process plays in ensuring the quality consistency and in the evaluation and decision-making of changes in marketed TCM preparations. Furthermore, to benefit the high-quality development of the TCM industry, this paper offers recommendations for improving quality control of TCM preparations in the manufacturing process and implementing new technologies and methods.
Quality Control ; Drugs, Chinese Herbal/chemistry* ; Medicine, Chinese Traditional/standards* ; Decision Making ; Humans

Medical institutions, with their clinical practice foundation and abundant human use experience data, have become important carriers for the inheritance and innovation of traditional Chinese medicine(TCM) and the "cradles" of the preparation of new TCM. To effectively promote the transformation of new TCM originating from the TCM clinical practice in medical institutions and establish an effective evaluation index system for the transformation of new TCM conforming to the characteristics of TCM, consensus experts adopted the literature research, questionnaire survey, Delphi method, etc. By focusing on the policy and technical evaluation of new TCM originating from the TCM clinical practice in medical institutions, a comprehensive evaluation from the dimensions of drug safety, efficacy, feasibility, and characteristic advantages was conducted, thus forming a comprehensive evaluation system with four primary indicators and 37 secondary indicators. The expert consensus reached aims to encourage medical institutions at all levels to continuously improve the high-quality research and development and transformation of new TCM originating from the TCM clinical practice in medical institutions and targeted at clinical needs, so as to provide a decision-making basis for the preparation, selection, cultivation, and transformation of new TCM for medical institutions, improve the development efficiency of new TCM, and precisely respond to the public medication needs.
Medicine, Chinese Traditional/standards* ; Humans ; Consensus ; Drugs, Chinese Herbal/therapeutic use* ; Surveys and Questionnaires

The chemical constituents from Cephalotaxus lanceolata were isolated and purified by using multiple chromatographic techniques, including octadecylsilane(ODS), silica gel, Sephadex LH-20 column chromatography, and semi-preparative high-performance liquid chromatography(HPLC). A total of 17 compounds obtained were identified by using spectroscopic methods such as nuclear magnetic resonance(NMR), mass spectrometry(MS), and ultraviolet(UV) combined with literature data. Compound 1 was a new alkaloid dimer, named cephalancetine E. The known compounds were determined as cephalancetine A(2), 11-hydroxycephalotaxine(3), 4-hydroxycephalotaxine(4), cephalotaxine(5), epicephalotaxine(6), cephalotaxine β-N-oxide(7), acetylcephalotaxine(8), cephalotine A(9), cephalotine B(10), 11-hydroxycephalotaxine hemiketal(11), 3-deoxy-3,11-epoxy-cephalotaxine(12), cephalotaxinone(13), isocephalotaxinone(14), 2,11-epoxy-1,2-dihydro-8-oxo-cephalotaxine(15), cephalotaxamide(16), and drupacine(17), respectively. Compounds 11, 12, and 15 were isolated from the Cephalotaxus genus for the first time. The biological activity was tested for compounds 1-17. The results reveal that compound 17 displays potent inhibitory activities against three human cancer cell lines(HepG-2, MCF-7, and SH-SY5Y).
Cephalotaxus/chemistry* ; Humans ; Cell Line, Tumor ; Drugs, Chinese Herbal/pharmacology* ; Harringtonines/pharmacology* ; Molecular Structure ; Dimerization ; Alkaloids/isolation & purification* ; Magnetic Resonance Spectroscopy

Hepatocellular carcinoma(HCC), the third leading cause of cancer-related death worldwide, is characterized by high mortality and recurrence rates. Common treatments include hepatectomy, liver transplantation, ablation therapy, interventional therapy, radiotherapy, systemic therapy, and traditional Chinese medicine(TCM). While exhibiting specific advantages, these approaches are associated with varying degrees of adverse effects. To alleviate patients' suffering and burdens, it is crucial to explore additional treatments and elucidate the pathogenesis of HCC, laying a foundation for the development of new TCM-based drugs. With emerging research on gut microbiota, it has been revealed that microbiota plays a vital role in the development of HCC by influencing intestinal barrier function, microbial metabolites, and immune regulation. TCM, with its multi-component, multi-target, and multi-pathway characteristics, has been increasingly recognized as a vital therapeutic treatment for HCC, particularly in patients at intermediate or advanced stages, by prolonging survival and improving quality of life. Recent global studies demonstrate that TCM exerts anti-HCC effects by modulating gut microbiota, restoring intestinal barrier function, regulating microbial composition and its metabolites, suppressing inflammation, and enhancing immune responses, thereby inhibiting the malignant phenotype of HCC. This review aims to elucidate the mechanisms by which gut microbiota contributes to the development and progression of HCC and highlight the regulatory effects of TCM, addressing the current gap in systematic understanding of the "TCM-gut microbiota-HCC" axis. The findings provide theoretical support for integrating TCM with western medicine in HCC treatment and promote the transition from basic research to precision clinical therapy through microbiota-targeted drug development and TCM-based interventions.
Humans ; Gastrointestinal Microbiome/drug effects* ; Carcinoma, Hepatocellular/microbiology* ; Liver Neoplasms/microbiology* ; Drugs, Chinese Herbal/administration & dosage* ; Animals ; Medicine, Chinese Traditional

Panax ginseng as a perennial herb of Araliaceae, exhibits pharmacological effects such as central nervous system stimulation, anti-tumor properties, and cardiovascular and cerebrovascular protection. The B3 gene family plays a crucial role in growth and development, antioxidant activity, stress resistance, and secondary metabolism regulation of plants and has been extensively studied in various plants. However, the identification and analysis of the B3 gene family in P. ginseng have not been reported. In this study, a total of 145 B3 genes(PgB3s) with complete open reading frames(ORF) were identified from P. ginseng and classified into five subfamilies based on domain types. Through correlation analysis with ginsenoside content, SNP/InDels analysis, and interaction analysis with key enzyme genes, 15 PgB3 transcripts were found to be significantly correlated with ginsenoside content and exhibited a close interaction network with key enzyme genes involved in ginsenoside biosynthesis, which indicated that these genes may participate in the regulation of ginsenoside biosynthesis. Additionally, this study found that PgB3 genes exhibited induced expression in response to methyl jasmonate(MeJA) stress, which aligned with the presence of abundant stress response elements in their promoters, confirming the important role of the B3 gene family in P. ginseng in stress resistance. The results of this study revealed the potential functions of PgB3 genes in ginsenoside biosynthesis and stress response, providing a significant theoretical basis for further research on the functions of PgB3 genes and their regulatory mechanisms.
Panax/metabolism* ; Gene Expression Regulation, Plant ; Plant Proteins/metabolism* ; Ginsenosides/biosynthesis* ; Multigene Family ; Phylogeny

OBJECTIVE: To explore clinical effect of autologous osteochondral transplantation (AOT) in the treatment of recurrent anterior dislocation of the shoulder joint with glenoid cartilage defect in rabbits by establishing a model of recurrent anterior dislocation of the shoulder joint with < 20% glenoid cartilage defect in rabbits. METHODS: Twenty-four male New Zealand white rabbits, aged 6-month-old, weighed (2.69±0.17) kg were selected. The labrum of shoulder joint of rabbits was artificially destroyed to establish a model of recurrent anterior dislocation of shoulder joint with cartilage defect. They were divided into AOT surgery group and simple suture group, with 12 rabbits in each group. AOT group were underwent AOT surgery, while simple suture group was treated with simple Bankart suture for recurrent shoulder joint dislocation. At 6 and 12 weeks after operation, 6 rabbits between two groups were sacrificed for sampling. The dietary conditions, activity conditions, mental states of rabbits and healing conditions of grafts in the specimens were observed and compared between two groups. HE staining was used to observe cell creep, cell morphology, inflammatory cell infiltration, fibrochondrocytes and their arrangement. Masson staining was used to observe the formation and arrangement of collagen fibers; Safrane-green staining was used to observe the regeneration of articular cartilage, subchondral bone and bone tissue. Bone mineral density (BMD), bone volume (BV) and trabecular thickness (Tb.Th) between two groups were measured by Micro-CT to evaluate the remodeling of shoulder glenoid bone defects by autologous osteochondral cartilage. RESULTS: After different surgical interventions were carried out in both groups of rabbits, at 6 weeks after the operation, the abduction, extension, internal rotation and external rotation of the shoulder joint on the operated side showed limited range of motion compared with the contralateral side, while adduction and forward flexion showed no obvious abnormalities compared with the contralateral side. At 12 weeks after operation, the range motion of tshoulder joints in both groups of rabbits had returned to the state before modeling. The effects of HE staining, Masson staining and safrane-green staining at 12 weeks after operation in both groups were stronger than the staining results at 6 weeks after operation. Moreover, the results of HE staining, Masson staining and safranin fixation green staining in AOT group at 6 and 12 weeks after operation were all higher than those in simple suture group. Micro-CT scan results at 6 and 12 weeks after operation showed that BMD (0.427±0.014), (0.466±0.032) g·cm-3, BV(116.171±3.527), (159.327±3.500) mm3, and Tb.Th (0.230±0.006), (0.285±0.009) mm in AOT group, which were higher than those of simple suture group in BMD(0.358±0.011), (0.384±0.096) g·cm-3, BV(72.657±3.903), (118.713±3.860) mm3, and Tb.Th(0.204±0.009), (0.243±0.007) mm;and the differences were statistically significant (P<0.05). CONCLUSION AOT procedure could effectively promote osteogenesis and fibrocartilage regeneration in the cartilage defect area of the shoulder glenoid <20%, which is conducive to reshaping the structure of the shoulder glenoid.
Animals ; Rabbits ; Male ; Transplantation, Autologous ; Cartilage, Articular/injuries* ; Shoulder Dislocation/physiopathology* ; Bone Transplantation ; Shoulder Joint/surgery*

OBJECTIVE: To investigate the clinical efficacy of lengthened proximal femoral nail antirotation (PFNA) and InterTan in the treatment of subtrochanteric femur fractures in the elderly. METHODS: A retrospective analysis was performed on the data of 65 elderly patients diagnosed with subtrochanteric femoral fractures who met the inclusion criteria between October 2016 and January 2022. The enrolled patients were categorized into two groups according to the type of internal fixation used: the lengthened proximal femoral nail antirotation(PFNA) group and the InterTan group. There were 32 patients in the PFNA group, comprising 20 males and 12 females, with ages ranging from 60 to 85 years old with an average of (69.3±6.7 ) years old. Among these patients, 15 patients resulted from traffic accidents and 17 patients were caused by falls. According to the Seinsheimer classification system, there were 11 patients as type Ⅱ, 14 patients as type Ⅲ, 6 patients as type Ⅳ, and 1 patient as type Ⅴ. The InterTan group comprised 33 patients, including 20 males and 13 females, aged from 60 to 85 years old with an average of (69.8±7.8 ) years old. Of these, 15 patients resulted from traffic accidents, while 18 patients were caused by falls. According to the Seinsheimer classification system, 10 patients as type Ⅱ, 15 patients as type Ⅲ, 7 patients as type Ⅳ, and 1 patient as type Ⅴ. The intraoperative blood loss, operative duration, and fracture healing time were recorded and compared between two groups. The quality of fracture reduction was assessed using Chang's criteria. Additionally, the Harris hip score was utilized to evaluate hip function in both groups at 3 months postoperatively and at the final follow-up. RESULTS: All patients were followed up for a period ranging from 10 to 20 months with an average of (14.6±4.5) months. No statistically significant differences were observed between two groups in terms of operation time, intraoperative blood loss, quality of fracture reduction, or reduction methods (P>0.05). Three months after the surgery, the Harris hip score in the InterTan group was 80.0(78.0, 83.5) points, which was significantly higher than that in the PFNA group, which recorded a score of 77.5(75.0, 81.8) points. This difference was statistically significant (P<0.05). At the final follow-up, the Harris hip score in the InterTan group was 80.0(76.5, 87.0), while that in the PFNA group was 78.0(74.3, 82.8). No statistically significant difference was observed between two groups (P>0.05). CONCLUSION The use of lengthened PFNA and InterTan in the treatment of elderly subtrochanteric femur fractures can both achieve good treatment results, with the advantages of simple operation, firm fixation, and low failure rate of internal fixation. The lengthened InterTan can achieve better hip function than PFNA.
Humans ; Male ; Female ; Aged ; Aged, 80 and over ; Bone Nails ; Retrospective Studies ; Hip Fractures/surgery* ; Middle Aged ; Fracture Fixation, Intramedullary/instrumentation* ; Fracture Fixation, Internal/methods* ; Femoral Fractures/surgery*

Steroid-induced osteonecrosis of the femoral head (SONFH) is avascular necrosis of the femoral head caused by long-erm use of corticosteroids, and its pathogenesis is complex and affected by changes in the dynamic balance of the bone microenvironment. With the deepening of research, the role of bone microenvironment in the pathogenesis of SONFH has been gradually revealed. In the case of excessive use of glucocorticoids (GCs), the bone microenvironment changes significantly, causing imbalance in bone lipid metabolism, microcirculation disorders and disorders of immune regulation, which promotes the increase of the number and activity of osteoclasts, and interferes with the differentiation of osteoblasts and adipoblasts. Through the regulation of PI3K/AKT, OPG/RANKL/RANK, MAPK, JAK/STAT, Hedgehog and other signaling pathways, it eventually leads to osteocyte apoptosis, bone microvascular rupture and destruction of trabecular bone structure, which in turn leads to osteonecrosis, bone density reduction and bone microstructure destruction due to bone microcirculation ischemia, and finally leads to necrosis of the femoral head. This article reviews the role of bone microenvironment homeostasis in GCs-induced ONFH and the regulatory mechanism of bone microenvironment, which is helpful to reveal the pathogenesis of SONFH and provide a theoretical basis for exploring effective intervention strategies.
Humans ; Femur Head Necrosis/physiopathology* ; Animals ; Signal Transduction ; Bone and Bones/metabolism* ; Glucocorticoids/adverse effects* ; Cellular Microenvironment

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome