Background: Although several reports have addressed tendinous mallet finger (TMF), they have not identified which method best informs surgeons about the extent of residual extension lag in these patients. We aimed to assess the association between sonographic classification of acute TMF and the degree of extension lag remaining at the final follow-up. Methods: The inclusion criterion was acute TMF with symptom onset within 2 weeks. Thirty-eight patients (23 male and 15 female) participated, with a mean follow-up of 17.1 months (range, 12.3–23.5 months). Range of motion, including extension lag, was measured at both the initial presentation and the final follow-up. All patients were managed conservatively using a finger splint for a period exceeding 6 weeks. Ultrasonography was performed for all participants to assess the severity of terminal extensor tendon injury. Statistical analyses examined the relationship between sonographic type and extension lag at final follow-up. Results: At initial presentation, the mean extension lag was 46.0°, which improved to 17.5° at the last follow-up. TMF cases were categorized into 3 sonographic types (hypo-echoic, thinned, and wavy) based on ultrasound characteristics. A significant difference in extension lag at final follow-up was observed among the TMF groups (p = 0.005). Patients with the wavy type had the greatest mean extension lag, whereas those with the hypo-echoic type had the least mean extension lag, with statistical significance. Conclusions Sonographic assessment of TMF can aid in predicting residual extension lag in patients with TMF undergoing conservative treatment with a finger splint.

Purpose: This study was conducted to develop a convolutional neural network (CNN) algorithm that can diagnose cervical foraminal stenosis using oblique radiographs and evaluate its accuracy. Materials and Methods: A total of 997 patients who underwent cervical MRI and cervical oblique radiographs within a 3-month interval were included. Oblique radiographs were labeled as “foraminal stenosis” or “no foraminal stenosis” according to whether foraminal stenosis was present in the C2–T1 levels based on MRI evaluation as ground truth. The CNN model involved data augmentation, image preprocessing, and transfer learning using DenseNet161. Visualization of the location of the CNN model was performed using gradient-weight class activation mapping (Grad-CAM). Results: The area under the curve (AUC) of the receiver operating characteristic curve based on DenseNet161 was 0.889 (95% confidence interval, 0.851–0.927). The F1 score, accuracy, precision, and recall were 88.5%, 84.6%, 88.1%, and 88.5%, respectively.The accuracy of the proposed CNN model was significantly higher than that of two orthopedic surgeons (64.0%, p<0.001; 58.0%, p<0.001). Grad-CAM analysis demonstrated that the CNN model most frequently focused on the foramen location for the determination of foraminal stenosis, although disc space was also frequently taken into consideration. Conclusion A CNN algorithm that can detect neural foraminal stenosis in cervical oblique radiographs was developed. The AUC, F1 score, and accuracy were 0.889, 88.5%, and 84.6%, respectively. With the current CNN model, cervical oblique radiography could be a more effective screening tool for neural foraminal stenosis.

Methods: We retrospectively reviewed patients who underwent cervical magnetic resonance imaging and computed tomography angiography for preoperative ACDF evaluation. The segments were classified according to the presence of foraminal stenosis. The height, thickness, anteroposterior length, horizontal distance from the uncinate process to the VA, and vertical distance from the uncinate process baseline to the VA of the uncinate process were measured. The distance between the uncinate anterior margin and the resection trajectory (UAM-to-RT) was measured. Results: There were no VA injuries or root injuries among the 101 patients who underwent ACDF (163 segments, mean age of 56.3±12.2). Uncinate anteroposterior length was considerably longer in foramens with foraminal stenosis, whereas uncinate process height, thickness, and distance between the uncinate process and VA were not significantly associated with foraminal stenosis. There were no significant differences in radiographic parameters based on uncinate degeneration. The UAM-to-RT distances for adequate decompression were 1.6±1.4 mm (range, 0–4.8 mm), 3.4±1.7 mm (range, 0–7.1 mm), 4.0±1.7 mm (range, 0–9.0 mm), and 4.5±1.2 mm (range, 2.5–7.5 mm) for C3–C4, C4–C5, C5–C6, and C6–C7, respectively. Conclusions More than half of the uncinate process in the anteroposterior plane should be removed for adequate neural foramen decompression. Foraminal stenosis or uncinate degeneration did not alter the relative anatomy of the uncinate process and the VA and did not impact VA injury risk.

Purpose: The programmed death protein 1 (PD-1) pathway is the critical mechanism in development of hepatocellular carcinoma (HCC). The present study analyzed the prognostic impact of pretransplant serum soluble PD-1 (sPD-1) concentration and α-FP–des-γ- –tumor volume (ADV) score in patients with previously untreated HCC undergone liver transplantation (LT). Methods: This retrospective single-center study enrolled 100 patients with HCC who underwent living donor LT from 2010 to 2016. Concentrations of sPD-1 were measured in stored serum samples. Results: Receiver operating characteristic curve analysis of 2-year tumor recurrence resulted in an sPD-1 cutoff of 177.1 µg/mL, which was associated with higher rates of tumor recurrence (P = 0.022), but not with overall patient survival (P = 0.460). The derived cutoff for pretransplant ADV score was 5.4log, which was associated with higher tumor recurrence rate (P < 0.001) and lower overall patient survival rate (P < 0.001). Both sPD-1 of >177.1 µg/mL (hazard ratio [HR], 2.26; P = 0.020) and pretransplant ADV score of >5.4log (HR, 3.56; P < 0.001) were independent risk factors for posttransplant HCC recurrence. The combination of these 2 factors enabled the stratification of patients into 3 groups, with groups having 0, 1, and 2 risk factors differing significantly in the prognosis of tumor recurrence (P < 0.001) and overall patient survival (P = 0.006). Conclusion Both sPD-1 concentration and ADV score have prognostic impacts in patients who underwent LT for untreated HCCs. These factors, both individually and combined, can help in predicting posttransplant prognosis.

Purpose: When splitting a liver for adult and pediatric graft recipients, the retained left medial section (S4) will undergo ischemic necrosis and the right trisection graft becomes an extended right liver (ERL) graft. We investigated the fates of the retained S4 and its prognostic impact in adult split liver transplantation (SLT) using an ERL graft. Methods: This was a retrospective analysis of 25 adult SLT recipients who received split ERL grafts. Results: The mean model for end-stage liver disease (MELD) score was 27.3 ± 10.9 and graft-recipient weight ratio (GRWR) was 1.98 ± 0.44. The mean donor age was 26.5 ± 7.7 years. The split ERL graft weight was 1,181.5 ± 252.8 g, which resulted in a mean GRWR of 1.98 ± 0.44. Computed tomography of the retained S4 parenchyma revealed small ischemic necrosis in 16 patients (64.0%) and large ischemic necrosis in the remaining 9 patients (36.0%). No S4-associated biliary complications were developed. The mean GRWR was 1.87 ± 0.43 in the 9 patients with large ischemic necrosis and 2.10 ± 0.44 in the 15 cases with small ischemic necrosis (P = 0.283). The retained S4 parenchyma showed gradual atrophy on follow-up imaging studies. The amount of S4 ischemic necrosis was not associated with graft (P = 0.592) or patient (P = 0.243) survival. A MELD score of >30 and pretransplant ventilator support were associated with inferior outcomes. Conclusion The amount of S4 ischemic necrosis is not a prognostic factor in adult SLT recipients, probably due to a sufficiently large GRWR.

Background: Spinal cord injury (SCI) is a serious clinical condition that impacts a patient's physical, psychological, and socio-economic status. The aim of this pilot study was to evaluate the effects of training with a newly developed powered wearable exoskeleton (Hyundai Medical Exoskeleton [H-MEX]) on functional mobility, physiological health, and quality of life in non-ambulatory SCI patients. Methods: Participants received 60 minutes of walking training with a powered exoskeleton 3 times per week for 10 weeks (total 30 sessions). The 6-minute walking test (6MWT) and timedup-and-go test (TUGT) were performed to assess ambulatory function. The physiological outcomes of interest after exoskeleton-assisted walking training were spasticity, pulmonary function, bone mineral density, colon transit time, and serum inflammatory markers. Effects of walking training on subjective outcomes were estimated by the Korean version of the Falls Efficacy Scale—International and the 36-Item Short-Form Health Survey version 2. Results: Ten participants finished 30 sessions of training and could ambulate independently.No severe adverse events were reported during the study. After training, the mean distance walked in the 6MWT (49.13 m) was significantly enhanced compared with baseline (20.65 m). The results of the TUGT also indicated a statistically significant improvement in the times required to stand up, walk 3 m and sit down. Although not statistically significant, clinically meaningful changes in some secondary physiological outcomes and/or quality of life were reported in some participants. Conclusion In conclusion, this study demonstrated that the newly developed wearable exoskeleton, H-MEX is safe and feasible for non-ambulatory SCI patients, and may have potential to improve quality of life of patients by assisting bipedal ambulation. These results suggest that the H-MEX can be considered a beneficial device for chronic non-ambulatory SCI patients.

Purpose: When splitting a liver for adult and pediatric graft recipients, the retained left medial section (S4) will undergo ischemic necrosis and the right trisection graft becomes an extended right liver (ERL) graft. We investigated the fates of the retained S4 and its prognostic impact in adult split liver transplantation (SLT) using an ERL graft. Methods: This was a retrospective analysis of 25 adult SLT recipients who received split ERL grafts. Results: The mean model for end-stage liver disease (MELD) score was 27.3 ± 10.9 and graft-recipient weight ratio (GRWR) was 1.98 ± 0.44. The mean donor age was 26.5 ± 7.7 years. The split ERL graft weight was 1,181.5 ± 252.8 g, which resulted in a mean GRWR of 1.98 ± 0.44. Computed tomography of the retained S4 parenchyma revealed small ischemic necrosis in 16 patients (64.0%) and large ischemic necrosis in the remaining 9 patients (36.0%). No S4-associated biliary complications were developed. The mean GRWR was 1.87 ± 0.43 in the 9 patients with large ischemic necrosis and 2.10 ± 0.44 in the 15 cases with small ischemic necrosis (P = 0.283). The retained S4 parenchyma showed gradual atrophy on follow-up imaging studies. The amount of S4 ischemic necrosis was not associated with graft (P = 0.592) or patient (P = 0.243) survival. A MELD score of >30 and pretransplant ventilator support were associated with inferior outcomes. Conclusion The amount of S4 ischemic necrosis is not a prognostic factor in adult SLT recipients, probably due to a sufficiently large GRWR.

Background: Spinal cord injury (SCI) is a serious clinical condition that impacts a patient's physical, psychological, and socio-economic status. The aim of this pilot study was to evaluate the effects of training with a newly developed powered wearable exoskeleton (Hyundai Medical Exoskeleton [H-MEX]) on functional mobility, physiological health, and quality of life in non-ambulatory SCI patients. Methods: Participants received 60 minutes of walking training with a powered exoskeleton 3 times per week for 10 weeks (total 30 sessions). The 6-minute walking test (6MWT) and timedup-and-go test (TUGT) were performed to assess ambulatory function. The physiological outcomes of interest after exoskeleton-assisted walking training were spasticity, pulmonary function, bone mineral density, colon transit time, and serum inflammatory markers. Effects of walking training on subjective outcomes were estimated by the Korean version of the Falls Efficacy Scale—International and the 36-Item Short-Form Health Survey version 2. Results: Ten participants finished 30 sessions of training and could ambulate independently.No severe adverse events were reported during the study. After training, the mean distance walked in the 6MWT (49.13 m) was significantly enhanced compared with baseline (20.65 m). The results of the TUGT also indicated a statistically significant improvement in the times required to stand up, walk 3 m and sit down. Although not statistically significant, clinically meaningful changes in some secondary physiological outcomes and/or quality of life were reported in some participants. Conclusion In conclusion, this study demonstrated that the newly developed wearable exoskeleton, H-MEX is safe and feasible for non-ambulatory SCI patients, and may have potential to improve quality of life of patients by assisting bipedal ambulation. These results suggest that the H-MEX can be considered a beneficial device for chronic non-ambulatory SCI patients.

The purpose of this study was to measure the transmittance change of composites during light curing in real time according to different shades and thicknesses. An instrument using pulse width modulation-curing light was developed to measure the transmittance of composites in real time. A micro-hybrid composite, Filtek Z250, was used for %transmittance measurement with five different shades (A1, A2, A3, A3.5, A4) and 4 different thicknesses (0.16, 0.5, 1.0, 1.5 mm). The maximum value of d(%Transmittance)/dt and peak time were used to observe polymerization kinetics. Attenuation coefficient was also compared between pre and post cured specimens. The transmittance increased in all specimens after polymerization. A2 showed the highest and A1 showed the lowest transmittance in both pre and post curing. The transmittance change and maximum rate of change were highest in A2 and lowest in A3.5, and the peak time, which ranged in 3.10 to 4.07, was not significantly different among shades. As the specimen became thinner, both the transmittance and rate of change increased, and the peak time was maximum at 1.5 mm thickness. The absolute value of attenuation coefficient decreased after polymerization in all specimens. In conclusion, the transmittance of composite increased after polymerization. Each shade showed different transmittance value for both pre and post curing state, and thinner specimen showed higher transmittance value. Polymerization kinetics could also be observed through the rate of transmittance change over time.

The purpose of this study was to measure the transmittance change of composites during light curing in real time according to different shades and thicknesses. An instrument using pulse width modulation-curing light was developed to measure the transmittance of composites in real time. A micro-hybrid composite, Filtek Z250, was used for %transmittance measurement with five different shades (A1, A2, A3, A3.5, A4) and 4 different thicknesses (0.16, 0.5, 1.0, 1.5 mm). The maximum value of d(%Transmittance)/dt and peak time were used to observe polymerization kinetics. Attenuation coefficient was also compared between pre and post cured specimens. The transmittance increased in all specimens after polymerization. A2 showed the highest and A1 showed the lowest transmittance in both pre and post curing. The transmittance change and maximum rate of change were highest in A2 and lowest in A3.5, and the peak time, which ranged in 3.10 to 4.07, was not significantly different among shades. As the specimen became thinner, both the transmittance and rate of change increased, and the peak time was maximum at 1.5 mm thickness. The absolute value of attenuation coefficient decreased after polymerization in all specimens. In conclusion, the transmittance of composite increased after polymerization. Each shade showed different transmittance value for both pre and post curing state, and thinner specimen showed higher transmittance value. Polymerization kinetics could also be observed through the rate of transmittance change over time.