Guided by molecular networking, nine novel curvularin derivatives (1-9) and 16 known analogs (10-25) were isolated from the hydrothermal vent sediment fungus Penicillium sp. HL-50. Notably, compounds 5-7 represented a hybrid of curvularin and purine. The structures and absolute configurations of compounds 1-9 were elucidated via nuclear magnetic resonance (NMR) spectroscopy, X-ray diffraction, electronic circular dichroism (ECD) calculations, ¹³C NMR calculation, modified Mosher's method, and chemical derivatization. Investigation of anti-inflammatory activities revealed that compounds 7-9, 11, 12, 14, 15, and 18 exhibited significant suppressive effects against lipopolysaccharide (LPS)-induced nitric oxide (NO) production in murine macrophage RAW264.7 cells, with IC₅₀ values ranging from 0.44 to 4.40 μmol·L^-1. Furthermore, these bioactive compounds were found to suppress the expression of inflammation-related proteins, including inducible NO synthase (iNOS), cyclooxygenase-2 (COX-2), NLR family pyrin domain-containing protein 3 (NLRP3), and nuclear factor kappa-B (NF-κB). Additional studies demonstrated that the novel compound 7 possessed potent anti-inflammatory activity by inhibiting the transcription of inflammation-related genes, downregulating the expression of inflammation-related proteins, and inhibiting the release of inflammatory cytokines, indicating its potential application in the treatment of inflammatory diseases.
Penicillium/chemistry* ; Mice ; Animals ; Anti-Inflammatory Agents/isolation & purification* ; RAW 264.7 Cells ; Nitric Oxide/metabolism* ; Hydrothermal Vents/microbiology* ; Macrophages/immunology* ; Molecular Structure ; Nitric Oxide Synthase Type II/immunology* ; Cyclooxygenase 2/immunology* ; Geologic Sediments/microbiology* ; NF-kappa B/immunology* ; NLR Family, Pyrin Domain-Containing 3 Protein/immunology*

Objective To analyze dynamic contrast-enhanced MRI (DCE-MRI) radiomic features using machine learning algorithms, and to develop and validate a predictive model for HER-2 status in breast cancer. Methods The DCE-MRI images of 272 treatment-naive female patients with breast cancer between 2020 and 2022 were included in this study. Regions of interest (ROIs) were manually segmented using 3d-Slicer software, and radiomic features were extracted. All patients were randomly divided into training sets or validation sets at a ratio of 4∶1. The least absolute shrinkage and selection operator (LASSO) algorithm was used for feature screening on the training set, followed by the development of predictive models using six machine learning algorithms. Internal cross-validation was performed to compare the performance differences between the models. The best-performing model was selected, trained on the training set, and evaluated on the validation set. Evaluation metrics included area under the curve (AUC), sensitivity, specificity, precision, and recall rate. Results The clinical data of patients in the training set and validation set showed no significant differences. Five features were identified by the LASSO algorithm. With these features, six machine learning models were developed on the training set, and their predictive performance was internally cross-validated using the bagging method. XGBoost model had the highest mean AUC (0.696), followed by RF model (0.690); XGBoost model had the highest mean precision (0.756), followed by LR and RF models. Therefore, XGBoost was the optimal model. An HER-2 predictive model was built using the XGBoost algorithm on the training set and applied to the validation set. The AUC, precision, sensitivity, and specificity of the predictive model on the validation set were calculated, and ROC curves, precision-recall curves, calibration curves, and decision-making curves were plotted. Conclusion This study constructed and evaluated different DCE-MRI radiomics-based machine learning models for predicting HER-2 status in breast cancer. Among them, XGBoost algorithm performed the best and has the potential to become a new non-invasive method for preoperative prediction of HER-2 status, providing reliable evidence for personalized clinical diagnosis and treatment.

Objective:In this retrospective study, the accuracy and outcomes of segmental Le Fort I surgery with the aid of 3D-printed surgical templates and occlusal splints and dental model surgery were evaluated.Methods:Clinical data of patients receiving segmental Le Fort I surgery in the Department of Orthognathic and Temporo-Mandibular Joint Surgery of West China Stomatological Hospital of Sichuan University from January 2014 to June 2019 were retrospectively analyzed. The accuracy of virtual surgical planning(VSP) and the difference between VSP and dental model surgery were evaluated by postoperative complications, color distance maps, and quantitative accuracy analysis.The amount of surgical displacement of the maxilla in the three-dimensional direction before and after surgery, the occurrence of postoperative complications and the patients'satisfaction survey were analyzed in both groups. Paired t-tests were used for the linear distance and angle between the preoperative design model and the final virtual surgery model in the digital surgery group. Independent samples t-test was used for each marker point’s preoperative and postoperative displacements in the three-dimensional direction between the digital surgery group and the dental model group. The proportion of postoperative complications in the 2 groups was tested using the Pearson chi-square test, and the difference was considered statistically significant at P<0.05. Results:There were 129 patients in the digital surgery group, 35 males and 94 females, aged (24.5±6.5) years, and 92 patients in the dental model surgery group, 28 males and 64 females, aged (27.7±5.4) years.The overall mean linear difference was 1.23±0.35 mm, and the overall mean angular difference was 2.48°±0.31°. The vertical displacement of U3R, U6L in the digital surgery group was (6.72±1.57)mm and (4.73±2.07)mm. The vertical displacement of U3R, U6L in the group of dental model surgery was (4.07±2.14)mm and (1.62±1.82)mm.The significant deviation difference in U3R-Y and U6L-Y between two groups could be detected. The complications in two groups showed a significant difference. Except for one case of root injury, there was no serious complication recorded in the digital surgery group. However, there were three cases of palatal fistulas, four cases of root injury and two cases of bone dehiscence in the dental model group. 94.5% of patients in the digital surgery group are satisfied with the surgical results, while 89.1% in the dental model group.Conclusion:Compared with dental model surgery, segmental Le Fort I surgery is highly accurate under the guidance of surgical templates and occlusal splint which has better postoperative results and effectively reduces the occurrence of surgical complications.

Objective:To analyze the association between zygomatic change and bone setback or resection and propose a quantitative guidance for L-shaped reduction malarplasty by linear regression analysis based on computed tomographic (CT) scan images.Methods:A retrospective observational study was conducted on patients who underwent L-shaped reduction malarplasty with mortice and tenon joint at the zygomatic arch in Department of Orthognathic and Temporomandibular Joint Surgery, West China Hospital of Stomatology, Sichuan University from January 2017 to September 2022. Bone setback and resection were performed in cases required a classical L-shaped osteoectomy with oblique bone resection (Group Ⅰ). Bone setback was performed in cases required a modified L-shaped osteotomy without bone resection (Group Ⅱ). Wound healing and the occurrence of complications were followed up after operation. The amount of bone setback and resection were calculated by using preoperative and postoperative CT scan images. The unilateral width changes of the anterior, middle, and posterior zygomatic regions(ΔZBP-MFP, ΔZMP-MFP, ΔZAP-MFP, respectively) as well as zygomatic protrusion change(Δzygomatic protrusion) were also evaluated. SPSS 20.0 software was used for statistical analysis. The measurement data was expressed as Mean±SD. Zygomatic width and protrusion change of the two groups was compared by independent t-test. Comparison of complication rates between the two groups was performed using the χ2 test. Correlation analysis using Pearson correlation coefficients was performed between bone resection or setback and zygomatic width or protrusion change. Linear regression analysis was also performed. Results:A total of 80 patients were enrolled. Group Ⅰ consisted of 40 patients [6 males and 34 females; aged (25.2±3.8) years, ranging from 19 to 33 years] who underwent a classical L-shaped osteotomy with both bone setback and resection, while Group Ⅱ consisted of 40 patients [10 males and 30 females; aged (26.0±3.0) years, ranging from 20 to 35 years] who underwent a modified L-shaped osteotomy with bone setback but without bone resection. All patients healed uneventfully during the follow-up period[(12.5±3.3) months, ranging from 5 to 20 months]. There was no significant difference in the incidence of complications such as infection, transient paresthesia, severe swelling and hematoma between the two groups ( P>0.05). No severe complications, such as facial asymmetry, sagging cheek, bone nonunion, were observed. All patients significantly improved facial contours. There was a statistically significant difference (all P<0.01) in ΔZBP-MFP [ (2.52±0.76) mm vs. (1.85±0.40) mm], ΔZMP-MFP [ (3.30±0.54) mm vs. (2.94±0.51) mm] and Δzygomatic protrusion [ (4.42±1.20) mm vs. (3.59±0.84) mm] between Group Ⅰ and Group Ⅱ. No statistical difference was found in ΔZAP-MFP ( P>0.05). Significant correlation was observed between the bone setback or resection and the changes of anterior, middle zygomatic width as well as protrusion in both the two groups ( r=0.60-0.92, all P<0.01), and the linear regression equation was established. The correlation between bone setback or resection and the posterior zygomatic width change was not significant ( P>0.05). Conclusion:There are linear correlations between the unilateral anterior, middle zygomatic width change, zygomatic protrusion change and the unilateral bone setback or resection. The linear regression equations can be used as a quantitative guidance for preoperative surgical planning.

Objective:In this retrospective study, the accuracy and outcomes of segmental Le Fort I surgery with the aid of 3D-printed surgical templates and occlusal splints and dental model surgery were evaluated.Methods:Clinical data of patients receiving segmental Le Fort I surgery in the Department of Orthognathic and Temporo-Mandibular Joint Surgery of West China Stomatological Hospital of Sichuan University from January 2014 to June 2019 were retrospectively analyzed. The accuracy of virtual surgical planning(VSP) and the difference between VSP and dental model surgery were evaluated by postoperative complications, color distance maps, and quantitative accuracy analysis.The amount of surgical displacement of the maxilla in the three-dimensional direction before and after surgery, the occurrence of postoperative complications and the patients'satisfaction survey were analyzed in both groups. Paired t-tests were used for the linear distance and angle between the preoperative design model and the final virtual surgery model in the digital surgery group. Independent samples t-test was used for each marker point’s preoperative and postoperative displacements in the three-dimensional direction between the digital surgery group and the dental model group. The proportion of postoperative complications in the 2 groups was tested using the Pearson chi-square test, and the difference was considered statistically significant at P<0.05. Results:There were 129 patients in the digital surgery group, 35 males and 94 females, aged (24.5±6.5) years, and 92 patients in the dental model surgery group, 28 males and 64 females, aged (27.7±5.4) years.The overall mean linear difference was 1.23±0.35 mm, and the overall mean angular difference was 2.48°±0.31°. The vertical displacement of U3R, U6L in the digital surgery group was (6.72±1.57)mm and (4.73±2.07)mm. The vertical displacement of U3R, U6L in the group of dental model surgery was (4.07±2.14)mm and (1.62±1.82)mm.The significant deviation difference in U3R-Y and U6L-Y between two groups could be detected. The complications in two groups showed a significant difference. Except for one case of root injury, there was no serious complication recorded in the digital surgery group. However, there were three cases of palatal fistulas, four cases of root injury and two cases of bone dehiscence in the dental model group. 94.5% of patients in the digital surgery group are satisfied with the surgical results, while 89.1% in the dental model group.Conclusion:Compared with dental model surgery, segmental Le Fort I surgery is highly accurate under the guidance of surgical templates and occlusal splint which has better postoperative results and effectively reduces the occurrence of surgical complications.

Objective:To analyze the association between zygomatic change and bone setback or resection and propose a quantitative guidance for L-shaped reduction malarplasty by linear regression analysis based on computed tomographic (CT) scan images.Methods:A retrospective observational study was conducted on patients who underwent L-shaped reduction malarplasty with mortice and tenon joint at the zygomatic arch in Department of Orthognathic and Temporomandibular Joint Surgery, West China Hospital of Stomatology, Sichuan University from January 2017 to September 2022. Bone setback and resection were performed in cases required a classical L-shaped osteoectomy with oblique bone resection (Group Ⅰ). Bone setback was performed in cases required a modified L-shaped osteotomy without bone resection (Group Ⅱ). Wound healing and the occurrence of complications were followed up after operation. The amount of bone setback and resection were calculated by using preoperative and postoperative CT scan images. The unilateral width changes of the anterior, middle, and posterior zygomatic regions(ΔZBP-MFP, ΔZMP-MFP, ΔZAP-MFP, respectively) as well as zygomatic protrusion change(Δzygomatic protrusion) were also evaluated. SPSS 20.0 software was used for statistical analysis. The measurement data was expressed as Mean±SD. Zygomatic width and protrusion change of the two groups was compared by independent t-test. Comparison of complication rates between the two groups was performed using the χ2 test. Correlation analysis using Pearson correlation coefficients was performed between bone resection or setback and zygomatic width or protrusion change. Linear regression analysis was also performed. Results:A total of 80 patients were enrolled. Group Ⅰ consisted of 40 patients [6 males and 34 females; aged (25.2±3.8) years, ranging from 19 to 33 years] who underwent a classical L-shaped osteotomy with both bone setback and resection, while Group Ⅱ consisted of 40 patients [10 males and 30 females; aged (26.0±3.0) years, ranging from 20 to 35 years] who underwent a modified L-shaped osteotomy with bone setback but without bone resection. All patients healed uneventfully during the follow-up period[(12.5±3.3) months, ranging from 5 to 20 months]. There was no significant difference in the incidence of complications such as infection, transient paresthesia, severe swelling and hematoma between the two groups ( P>0.05). No severe complications, such as facial asymmetry, sagging cheek, bone nonunion, were observed. All patients significantly improved facial contours. There was a statistically significant difference (all P<0.01) in ΔZBP-MFP [ (2.52±0.76) mm vs. (1.85±0.40) mm], ΔZMP-MFP [ (3.30±0.54) mm vs. (2.94±0.51) mm] and Δzygomatic protrusion [ (4.42±1.20) mm vs. (3.59±0.84) mm] between Group Ⅰ and Group Ⅱ. No statistical difference was found in ΔZAP-MFP ( P>0.05). Significant correlation was observed between the bone setback or resection and the changes of anterior, middle zygomatic width as well as protrusion in both the two groups ( r=0.60-0.92, all P<0.01), and the linear regression equation was established. The correlation between bone setback or resection and the posterior zygomatic width change was not significant ( P>0.05). Conclusion:There are linear correlations between the unilateral anterior, middle zygomatic width change, zygomatic protrusion change and the unilateral bone setback or resection. The linear regression equations can be used as a quantitative guidance for preoperative surgical planning.

Aural vertigo frequently encountered in the otolaryngology department of traditional Chinese medicine （TCM） mainly involves peripheral vestibular diseases of Western medicine， such as Meniere's disease， benign paroxysmal positional vertigo， vestibular neuritis， and vestibular migraine， being a hot research topic in both TCM and Western medicine. Western medical therapies alone have unsatisfactory effects on recurrent aural vertigo， aural vertigo affecting the quality of life， aural vertigo not relieved after surgery， aural vertigo with complex causes， and children's aural vertigo. The literature records and clinical practice have proven that TCM demonstrates unique advantages in the treatment of aural vertigo. The China Association of Chinese medicine sponsored the "17th youth salon on the diseases responding specifically to TCM： Aural vertigo" and invited vertigo experts of TCM and Western medicine to discuss the difficulties and advantages of TCM diagnosis and treatment of aural vertigo. The experts deeply discussed the achievements and contributions of TCM and Western medicine in the diagnosis and treatment of aural vertigo， the control and mitigation of the symptoms， and the solutions to disease recurrence. The discussion clarified the positioning and advantages of TCM treatment and provided guidance for clinical and basic research on aural vertigo.

Objective To investigate the reasons for the inconsistent results between the vertical auto profile(VAP)method and bio-chemical homogeneous phase(BHP)method in detecting plasma low-density lipoprotein cholesterol(LDL-C),and provide experimen-tal basis for the accurate and quantitative detection of plasma LDL-C levels.Methods A total of 360 plasma samples from diabetes mellitus patients combined with carotid plaque admitted to the Department of Endocrinology of Ningbo Yinzhou Hospital of Traditional Chinese Medicine during January,2022 and January,2023 were collected.The LDL-C levels of these samples were detected by the VAP method and BHP method,respectively.The VAP method uses software to automatically calculate the area under the LDL-C curve after centrifugation of the sample as the LDL-C level(LDL-CVAP)and the BHP method directly detects the LDL-C level(LDL-CBHP)by the special surfactant method.360 samples were divided into the consistent group(group A)and inconsistent group(group B)ac-cording to the relative deviation between the LDL-CBHP and LDL-CVAP methods.Group B was further divided into the LDL-CBHP on the high side group(Group B1)and LDL-CBHP on the low side group(Group B2).Groups B1 and B2 were divided into B1-1,B1-2,B1-3 and B2-1 groups based on the degree of relative deviation.The percentages of samples and levels of lipoprotein a cholesterol[Lp(a)-C],intermediate-density lipoprotein cholesterol(IDL-C),Lp(a)-C and IDL-C[Lp(a)-C+IDL-C],very low-density lipo-protein cholesterol(VLDL-C),total cholesterol(TC)and total triglyceride(TG)in each group were compared.Results The LDL-CBHP levels of 360 samples were significantly higher than that of LDL-CVAP(P＜0.01).The percentage of samples in group B was significantly higher than that in group A,and that of group B1 was significantly higher than that of group B2(P＜0.05).The levels of Lp(a)-C,IDL-C and Lp(a)-C+IDL-C in groups B1-1,B1-2,and B1-3 were significantly higher than those in group A(P＜0.01).The relative deviation between LDL-CBHP and LDL-CVAP in 360 samples was significantly positively correlated with the levels of Lp(a)-C,IDL-C,and Lp(a)-C+IDL-C(P＜0.01).The maximum correlation coefficient was found in Lp(a)-C+IDL-C.Conclusion The results of plasma LDL-C in diabetes mellitus patients combined with carotid plaque detected by the BHP method are significantly different from those detected by the VAP method,which mainly shows that the results of the BHP method are on the high side.The higher the level of plasma Lp(a)-C+IDL-C,the greater the relative deviation between the BHP method and VAP method.The reason for the high results of LDL-C detected by the BHP method may be related to the fact that LDL-CBHP contains irremovable Lp(a)-C and cholesterol carried by IDL-C.The VAP method can be used as an accurate method for detecting real LDL-C without Lp(a)-C and IDL-C.

Objective:To compare the outcomes of the total mandibular inferior border ostectomy and the T-shape genioplasty for chin narrowing combined with mandibular contouring and to assess the indications of the total mandibular inferior border ostectomy.Methods:In this retrospective study, the clinical data were collected from the patients who received mandibular contouring and chin narrowing at the Department of Orthognathic and Temporomandibular Joint Surgery, West China Hospital of Stomatology, Sichuan University from January 2015 to January 2019. According to the surgical procedure, patients were divided into Total inferior border ostectomy (Group I) and T-shaped genioplasty combined with mandibular contouring (Group II). Computed tomography scans, combined with medical records and photographs, were collected preoperatively and in the final follow-up postoperatively. Lower facial height, chin width, chin symmetry, facial proportions as well as patients’ satisfaction and complications were investigated to assess the clinical outcomes. Statistical analyses were performed using IBM SPSS Statistics, version 20.0 (IBM Corp., Armonk, NY, USA). The measurement data were expressed as Mean±SD, and the counting data were expressed as case (%). T-test was performed to compare the age difference, average satisfaction score and the relative measurements between the two groups. Pearson’s chi squared test was used to compare the sex composition ratio and complication ratio between the two groups. P<0.05 was considered statistically significant. Results:102 patients were involved in this study, including 42 patients in group I, 7 males and 35 females; 60 patients in group Ⅱ, 11 males and 49 females. All patients improved lower facial contours. No severe complications were observed during the follow-up period(6~24 months) Regarding appearance satisfaction, 30 cases were very satisfied, 11 cases were satisfied, and 1 case was neutral in group I. 43 cases were very satisfied, 15 cases were satisfied, and 2 cases were neutral in group II. There was no significant difference ( P >0.05) between group I and group II in age, sex, inferior lip numbness, hematoma, severe swelling, infection, soft tissue ptosisand appearance satisfaction.There was a statistically significant difference ( P < 0.01) in preoperative lower facial height [(63.05±4.15) mm vs. (52.87±4.07) mm], Preoperative lower and midfacial height ratio [(107.89±3.11) % vs. (91.29±7.94) %], and preoperative chin width and lower facial height ratio [(90.31±3.19) % vs. (104.32±5.28) %], chin width change [(12.11±2.59) mm vs. (8.39±1.89) mm], postoperative chin deviation [(0.17±0. 09)mm vs. (0.36±0.20) mm] and Postoperative chin width and lower facial height ratio [(76.80±1.85) % vs. (80.95±3.75) %]. No statistical difference ( P>0.05) was found in preoperative chin deviation, midfacial height, postoperative lower facial heigh, postoperative lower and midfacial height ratio. Conclusion:In conclusion, compared to T-shape genioplasty combined with mandibular contouring, total mandibular inferior border ostectomy had a large amount of chin narrowing and better postoperative symmetry and is well suited for a longer, wider, and more asymmetrical chin. The surgical options should be considered and chosen quantitatively to achieve aesthetically satisfactory results.

Objective:To compare the outcomes of the total mandibular inferior border ostectomy and the T-shape genioplasty for chin narrowing combined with mandibular contouring and to assess the indications of the total mandibular inferior border ostectomy.Methods:In this retrospective study, the clinical data were collected from the patients who received mandibular contouring and chin narrowing at the Department of Orthognathic and Temporomandibular Joint Surgery, West China Hospital of Stomatology, Sichuan University from January 2015 to January 2019. According to the surgical procedure, patients were divided into Total inferior border ostectomy (Group I) and T-shaped genioplasty combined with mandibular contouring (Group II). Computed tomography scans, combined with medical records and photographs, were collected preoperatively and in the final follow-up postoperatively. Lower facial height, chin width, chin symmetry, facial proportions as well as patients’ satisfaction and complications were investigated to assess the clinical outcomes. Statistical analyses were performed using IBM SPSS Statistics, version 20.0 (IBM Corp., Armonk, NY, USA). The measurement data were expressed as Mean±SD, and the counting data were expressed as case (%). T-test was performed to compare the age difference, average satisfaction score and the relative measurements between the two groups. Pearson’s chi squared test was used to compare the sex composition ratio and complication ratio between the two groups. P<0.05 was considered statistically significant. Results:102 patients were involved in this study, including 42 patients in group I, 7 males and 35 females; 60 patients in group Ⅱ, 11 males and 49 females. All patients improved lower facial contours. No severe complications were observed during the follow-up period(6~24 months) Regarding appearance satisfaction, 30 cases were very satisfied, 11 cases were satisfied, and 1 case was neutral in group I. 43 cases were very satisfied, 15 cases were satisfied, and 2 cases were neutral in group II. There was no significant difference ( P >0.05) between group I and group II in age, sex, inferior lip numbness, hematoma, severe swelling, infection, soft tissue ptosisand appearance satisfaction.There was a statistically significant difference ( P < 0.01) in preoperative lower facial height [(63.05±4.15) mm vs. (52.87±4.07) mm], Preoperative lower and midfacial height ratio [(107.89±3.11) % vs. (91.29±7.94) %], and preoperative chin width and lower facial height ratio [(90.31±3.19) % vs. (104.32±5.28) %], chin width change [(12.11±2.59) mm vs. (8.39±1.89) mm], postoperative chin deviation [(0.17±0. 09)mm vs. (0.36±0.20) mm] and Postoperative chin width and lower facial height ratio [(76.80±1.85) % vs. (80.95±3.75) %]. No statistical difference ( P>0.05) was found in preoperative chin deviation, midfacial height, postoperative lower facial heigh, postoperative lower and midfacial height ratio. Conclusion:In conclusion, compared to T-shape genioplasty combined with mandibular contouring, total mandibular inferior border ostectomy had a large amount of chin narrowing and better postoperative symmetry and is well suited for a longer, wider, and more asymmetrical chin. The surgical options should be considered and chosen quantitatively to achieve aesthetically satisfactory results.