Objective:To evaluate the clinical efficacy of minimally invasive Chevron-Akin osteotomy (MICA) in the treatment of mild to moderate hallux valgus without addressing the proximal projection.Methods:A retrospective analysis was conducted on 31 patients with unilateral mild to moderate hallux valgus who underwent third-generation MICA surgery at Shanghai Sixth People's Hospital from January 2019 to June 2020. Among these patients, 2 were male and 29 were female, with an average age of 41.13±7.8 years (range: 21-64 years). A total of 12 patients had mild hallux valgus, while 19 patients had moderate hallux valgus. The average body mass index (BMI) was 24.37±1.28 kg/m 2 (range: 22.06-26.13 kg/m 2). Preoperative and postoperative foot X-rays were taken at multiple time points, including 1 day, 1.5 months, 3 months, 12 months, and 24 months after surgery. These X-rays were used to assess the medial eminence width (MEW) of the first metatarsal head, the proximal medial projection width (PMRW) of the first metatarsal, the hallux valgus angle (HVA), the intermetatarsal angle (IMA), and the distal metatarsal articular angle (DMAA). Functional improvements and pain relief were evaluated using the American Orthopaedic Foot and Ankle Society (AOFAS) forefoot score and the visual analogue scale (VAS). Results:All 31 patients completed an average follow-up period of 25.67±2.35 months (range: 24-31 months). The average operation time was 39.55±7.31 minutes (range: 32-46 minutes). The number of intraoperative fluoroscopy exposures averaged 16.23±2.38 times (range: 13-21 times). At the two-year follow-up, significant improvements were observed in all measured parameters when compared to preoperative values ( P<0.05). The HVA decreased from 35.18°±3.59° before surgery to 10.93°±0.90° after surgery. The IMA was reduced from 11.47°±0.85° to 6.94°±0.65°, and the DMAA decreased from 15.24°±1.13° to 4.31°±0.56°. The MEW decreased from 4.07±0.70 mm to 0.13±0.11 mm. The PMRW, which was measured at one day postoperatively and at the two-year follow-up, decreased from 3.44±0.66 mm to 0.19±0.11 mm. Functional assessments also showed significant improvements ( P<0.05). The AOFAS forefoot score increased from 57.42±3.93 before surgery to 89.52±3.46 at the two-year follow-up. Pain levels, as assessed by the VAS, decreased from 5.68±1.11 preoperatively to 0.77±0.50 postoperatively. At the two-year follow-up, 97% of patients reported excellent satisfaction with the surgical outcome. During the follow-up period, complications included mild numbness around the wound in two cases, metatarsophalangeal joint stiffness in one case, and hallux valgus recurrence in one case, accounting for 3% of the cohort. Conclusion:Third-generation MICA without addressing the proximal projection is an effective procedure for correcting mild to moderate hallux valgus. This technique significantly improves foot function, reduces pain, and leads to high levels of patient satisfaction.

Objective:To evaluate the application of metagenomic next-generation sequencing（mNGS）in the identification of non-tuberculous mycobacteria（NTM）.Methods:A retrospective analysis was conducted on mNGS results of 358 bronchoalveolar lavage fluid（BALF）samples positive for NTM collected at the First Affiliated Hospital of Zhejiang University School of Medicine from February 2021 to January 2024. The analysis included the distribution of NTM species，the detection of mixed pathogens，and the performance of conventional mycobacterial detection methods.Results:The results showed that 362 strains of 15 NTM species were identified from 350 specimens，8 specimens were not precise to the species level. The most frequently detected species were Mycobacterium intracellulare（37.3%，135/362）， Mycobacterium abscessus（26.8%，97/362），followed by Mycobacterium avium（11.0%，40/362）， Mycobacterium kansasii（8.0%，29/362）and Mycobacterium chelonae（7.7%，28/362）. Single NTM species were detected in 339 specimens，while two or three NTM species were simultaneously detected in 11 specimens（3.1%，11/358）. Non-NTM microorganisms co-infected were detected in 53.4%（191/358）of NTM-positive BALF samples，including common pathogens such as Pseudomonas aeruginosa， Staphylococcus aureus，and Aspergillus fumigatus；and difficult-to-identify pathogens such as Legionella pneumophila and Talaromyces marneffei. In NTM-positive patients detected by mNGS，the results supported the diagnosis of NTM infection in 298 cases（298/358，83.2%）and 105 cases（105/358，29.3%）initiated anti-NTM treatment accordingly；while in 60 cases（60/358，16.8%）the positive results were considered as colonization or unrelated to clinical infection. For samples tested with acid-fast staining，mycobacterial liquid culture，and DNA microarray，the positivity rates for NTM were 31.5%（73/232），48.7%（57/117），and 43.0%（46/107），respectively. Conclusions:mNGS demonstrates advantages in identification of NTM. However，the test may detect multiple microorganisms，in that case，the interpretation with clinical and radiological results is requried to determine the main pathogens.

Objective:To evaluate the clinical efficacy of minimally invasive Chevron-Akin osteotomy (MICA) in the treatment of mild to moderate hallux valgus without addressing the proximal projection.Methods:A retrospective analysis was conducted on 31 patients with unilateral mild to moderate hallux valgus who underwent third-generation MICA surgery at Shanghai Sixth People's Hospital from January 2019 to June 2020. Among these patients, 2 were male and 29 were female, with an average age of 41.13±7.8 years (range: 21-64 years). A total of 12 patients had mild hallux valgus, while 19 patients had moderate hallux valgus. The average body mass index (BMI) was 24.37±1.28 kg/m 2 (range: 22.06-26.13 kg/m 2). Preoperative and postoperative foot X-rays were taken at multiple time points, including 1 day, 1.5 months, 3 months, 12 months, and 24 months after surgery. These X-rays were used to assess the medial eminence width (MEW) of the first metatarsal head, the proximal medial projection width (PMRW) of the first metatarsal, the hallux valgus angle (HVA), the intermetatarsal angle (IMA), and the distal metatarsal articular angle (DMAA). Functional improvements and pain relief were evaluated using the American Orthopaedic Foot and Ankle Society (AOFAS) forefoot score and the visual analogue scale (VAS). Results:All 31 patients completed an average follow-up period of 25.67±2.35 months (range: 24-31 months). The average operation time was 39.55±7.31 minutes (range: 32-46 minutes). The number of intraoperative fluoroscopy exposures averaged 16.23±2.38 times (range: 13-21 times). At the two-year follow-up, significant improvements were observed in all measured parameters when compared to preoperative values ( P<0.05). The HVA decreased from 35.18°±3.59° before surgery to 10.93°±0.90° after surgery. The IMA was reduced from 11.47°±0.85° to 6.94°±0.65°, and the DMAA decreased from 15.24°±1.13° to 4.31°±0.56°. The MEW decreased from 4.07±0.70 mm to 0.13±0.11 mm. The PMRW, which was measured at one day postoperatively and at the two-year follow-up, decreased from 3.44±0.66 mm to 0.19±0.11 mm. Functional assessments also showed significant improvements ( P<0.05). The AOFAS forefoot score increased from 57.42±3.93 before surgery to 89.52±3.46 at the two-year follow-up. Pain levels, as assessed by the VAS, decreased from 5.68±1.11 preoperatively to 0.77±0.50 postoperatively. At the two-year follow-up, 97% of patients reported excellent satisfaction with the surgical outcome. During the follow-up period, complications included mild numbness around the wound in two cases, metatarsophalangeal joint stiffness in one case, and hallux valgus recurrence in one case, accounting for 3% of the cohort. Conclusion:Third-generation MICA without addressing the proximal projection is an effective procedure for correcting mild to moderate hallux valgus. This technique significantly improves foot function, reduces pain, and leads to high levels of patient satisfaction.

Objective:To evaluate the application of metagenomic next-generation sequencing（mNGS）in the identification of non-tuberculous mycobacteria（NTM）.Methods:A retrospective analysis was conducted on mNGS results of 358 bronchoalveolar lavage fluid（BALF）samples positive for NTM collected at the First Affiliated Hospital of Zhejiang University School of Medicine from February 2021 to January 2024. The analysis included the distribution of NTM species，the detection of mixed pathogens，and the performance of conventional mycobacterial detection methods.Results:The results showed that 362 strains of 15 NTM species were identified from 350 specimens，8 specimens were not precise to the species level. The most frequently detected species were Mycobacterium intracellulare（37.3%，135/362）， Mycobacterium abscessus（26.8%，97/362），followed by Mycobacterium avium（11.0%，40/362）， Mycobacterium kansasii（8.0%，29/362）and Mycobacterium chelonae（7.7%，28/362）. Single NTM species were detected in 339 specimens，while two or three NTM species were simultaneously detected in 11 specimens（3.1%，11/358）. Non-NTM microorganisms co-infected were detected in 53.4%（191/358）of NTM-positive BALF samples，including common pathogens such as Pseudomonas aeruginosa， Staphylococcus aureus，and Aspergillus fumigatus；and difficult-to-identify pathogens such as Legionella pneumophila and Talaromyces marneffei. In NTM-positive patients detected by mNGS，the results supported the diagnosis of NTM infection in 298 cases（298/358，83.2%）and 105 cases（105/358，29.3%）initiated anti-NTM treatment accordingly；while in 60 cases（60/358，16.8%）the positive results were considered as colonization or unrelated to clinical infection. For samples tested with acid-fast staining，mycobacterial liquid culture，and DNA microarray，the positivity rates for NTM were 31.5%（73/232），48.7%（57/117），and 43.0%（46/107），respectively. Conclusions:mNGS demonstrates advantages in identification of NTM. However，the test may detect multiple microorganisms，in that case，the interpretation with clinical and radiological results is requried to determine the main pathogens.

ObjectiveTo investigate the therapeutic effect of Ganmai Dazao Tang on breast cancer-related depression and explore the mechanism of the decoction in regulating immune inflammation and neurotransmitters via the mitogen-activated protein kinase （MAPK）/nuclear factor-κB （NF-κB） pathway. MethodBALB/c mice were randomized into control， model， fluoxetine （5 mg·kg^-1·d^-1）， and low- and high-dose （crude drug 20 and 40 g·kg^-1， respectively） Ganmai Dazao Tang groups （n=10）. The mouse model of 4T1 orthotopic transplantation-induced breast cancer-related depression-like behavior was established. The depression-like behavior of mice was assessed by the tail suspension test and the forced swimming test. RT-qPCR was employed to determine the mRNA levels of interleukin （IL）-17A， forkhead box P3 （FoxP3），IL-1β， IL-6， and tumor necrosis factor-α （TNF-α） in the cerebral cortex. Flow cytometry was employed to measure the proportions of immune cell subsets in the spleen and thymus. HPLC-MS/MS was employed to measure neurotransmitter levels in the cerebral cortex. Western blotting was employed to detect the activation of the MAPK/NF-κB pathway. ResultCompared with the model group， administration of Ganmai Dazao Tang at a dose of 40 g crude drug·kg^-1 continuously for 4 weeks shortened the immobility time of modeled mice in the tail suspension and forced swimming tests （P<0.05）， down-regulated the mRNA levels of IL-1β， IL-17A， and TNF-α （P<0.05）， increased the proportions of T cells， CD4⁺ T cells， B cells， helper T 17 （Th17） cells， and regulatory T （Treg） cells， and reduced the proportion of CD8⁺ T cells （P<0.05）. Furthermore， it lowered the levels of 5-hydroxyindoleacetic acid （5-HIAA） and kynurenine （Kyn）， decreased the kynurenine/tryptophan （Kyn/Trp） ratio （P<0.05）， increased the content of 5-hydroxytryptamine （5-HT）， and down-regulated the protein levels of phosphorylated extracellular signal-regulated kinase （p-ERK）， phosphorylated p38 MAPK， and phosphorylated nuclear factor-κB p65 （P<0.05）. ConclusionGanmai Dazao Tang can down-regulate the expression of inflammatory cytokines such as IL-1β， IL-17A， and TNF-α， restore 5-HT metabolism and Kyn/Trp balance， increase the 5-HT content， and reduce the activation of p38 MAPK， ERK， and the MAPK-mediated NF-κB signaling pathway to reduce neuroinflammation in the treatment of cancer-related depression.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Non-lethal electric shock devices such as Taser have been widely used by military and police agencies worldwide. Taser can temporarily incapacitate human body mainly through discharge on skeletal muscle, while causing injuries to the tissues and organs such as the heart, skeletal muscle, blood vessel, eyeball, brain, bone and neuropsychiatric behavioral disorders through direct or indirect effects of electrical discharge, mechanical puncture, burning and infection. Though Taser has been introduced into China, there have been few studies about the damage to human body caused by Taser and no relevant systematic medical reviews have been found. However, an overall understanding of the characteristics of Taser injuries to human body is of great significance in reducing the disability and mortality rates caused by Taser as well as treating the injuries. To this end, the authors reviewed the research progress on human body injuries caused by Taser from the characteristics of Taser and the types and features of Taser injuries, aiming to provide references for the diagnosis and treatment of injuries caused by Taser.

The active denial system(ADS)is a millimeter wave electromagnetic directional energy non-lethal technology and the only microwave device against humans.Microwave radiation can cause damage to multiple systems in the human body,including the nervous,circulatory,immune,and reproductive systems.This article outlines the development,basic structure,and equipment of ADS,characteristics and mechanisms of medical injuries due to ADS,medical injury efficacy of ADS in terms of effects on the human body,determinants and skin depth.The precautions against and medical treatment of ADS-caused symptoms are briefly described.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To investigate the efficacy of osteochondral fragment fixation using bioabsorbable pins for Hepple Ⅱ osteochondral lesions of the talus (OLT) in adolescents.Methods:Retrospective case analysis was used. The clinical data and follow-up results of 13 adolescent patients (13 feet) with Hepple Ⅱ OLT were all treated with osteochondral fragment fixation using bioabsorbable pins admitted to Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from January 2017 to December 2021 were retrospectively analyzed. There were 7 males and 6 females, with 13 right feet. The age was (14.85±2.23) years old, ranged from 12 to 18 years old. According to the American orthopedic foot and ankle society (AOFAS) ankle-hindfoot score, visual analogue scale (VAS) and SF-36 score before operation and at the last follow-up were used to evaluate the efficacy and function of the patients. Measurement data with normal distribution were represented as mean ± standard deviation( ± s), and the comparison between groups was conducted using the t-test; The mearsurement data with skewness distribution were expressed by M( Q1, Q3), and rank-sum test was used for inter-group comparison. Results:Thirteen adolescent patients (13 feet) with Hepple Ⅱ OLT underwent surgery successfully and were followed up for (25.54±9.95) months. All wounds healed by first intention, and no complications such as wound infection and delayed healing occurred. Preoperative AOFAS ankle-posterior foot score, VAS and SF-36 score were 58.62±3.55, 7.00 (6.50, 8.00) and 68.38±4.81, respectively. At the last follow-up, the scores were 97.38±2.73, 1.00 (0.00, 1.00), 91.15±4.28, respectively, and the results were significantly improved at the last follow-up, with the difference between the two groups statistically significant( P<0.05). Conclusion:Osteochondral fragment fixation using bioabsorbable pins which can promote cartilage repair, significantly improve symptoms, and achieve better clinical satisfaction with fewer complications, is a safe and effective surgical treatment option for Hepple Ⅱ OLT in adolescents with satisfactory short-term clinical outcomes.