BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BackgroundPatients with depressive episode and schizophrenia have a high risk of suicide. The sleep electroencephalogram power spectral density characteristics of patients with depressive episode accompanied by suicidal behavior and those with schizophrenia may be different， but there is currently a lack of direct comparative studies on these two groups of patients. ObjectiveTo compare the sleep electroencephalogram power spectral density between depressive episode and schizophrenic patients with suicidal behavior， in order to provide references for exploring predictive indicators of suicidal behavior. MethodsFrom June 2018 to December 2020， 20 patients with depressive episode and 20 patients with schizophrenia who had committed suicide within the past month and were treated at the outpatient department of Shenzhen Kangning Hospital were selected. All of them met the diagnostic criteria for depressive episode or schizophrenia as defined in the International Classification of Diseases， tenth edition （ICD-10）. Using a random sampling method， 20 volunteers with matching gender and age to the patient groups were selected from the Cuiping community in Shenzhen as the control group. The subjective sleep of the patients was evaluated using the Insomnia Severity Index （ISI）， the Dysfunctional Belief and Attitude about Sleep （DBAS）， the Disturbing Dreams and Nightmare Severity Index （DDNSI）， and the Epworth Somnolence Scale （ESS）. The objective sleep of the patients was assessed using polysomnography. The sleep electroencephalogram was filtered and the power spectral density of the brain wave was analyzed and processed for all the subjects. The subjective and objective sleep conditions of the two patient groups were compared， and the sleep electroencephalogram power spectral density of the patient groups and the control group were also compared. ResultsA comparison of subjective and objective sleep conditions between patients with depressive episode accompanied by suicidal behavior and patients with schizophrenia accompanied by suicidal behavior showed no statistically significant differences （P>0.05）. Comparisons of sleep electroencephalogram power spectral density in the W stage （average power of α wave， total power of δ wave， average power of δ wave， average power of θ wave）， N1 stage （average power of β wave， total power of α wave， total power of δ wave）， N2 stage （total power of α wave， average power of α wave， total power of δ wave， average power of δ wave）， N3 stage （average power of α wave， average power of δ wave）， and R stage （total power of α wave， average power of α wave， total power of δ wave， average power of δ wave） between patients with depressive episode accompanied by suicidal behavior， patients with schizophrenia accompanied by suicidal behavior， and the control group showed statistically significant differences （P<0.05 or 0.01）. The total power of δ wave in the W stage and the average power of β wave and δ wave in the N1 stage were higher in two patient groups were higher than those of the control group. The total power of α wave and the average power of α wave in the N2 stage were lower than those of the control group， while the average power of δ wave was higher than that of the control group. The average power of α wave in the N3 stage of both patient groups were lower than that of the control group， while the average power of δ wave was higher than that of the control group. The total power and average power of α wave in the R stage were lower than those of the control group， while the total power and average power of δ wave were higher than those of the control group. All the differences were statistically significant. Patients with depressive episode accompanied by suicidal behavior had higher average powers of α wave， δ wave， and θ wave in the W stage compared with the control group， while the total power of α wave in the N1 stage was lower in the former group. All these differences were statistically significant （P<0.05）. ConclusionThe depressive episode patients accompanied by suicidal behavior have highly overlapping sleep electroencephalogram abnormal patterns with those of schizophrenia patients， mainly manifested as a general decrease in α wave power （N2， N3， R stage） and a general increase in δ wave power （W， N1， N2， N3， R stage） as well as β wave power in N1 stage. At the same time， patients with depressive episode accompanied by suicidal behavior also show specific changes， including an increase in the average power of α and θ waves during the wakefulness period （W stage）， and a decrease in the total power of α wave in N1 stage. ［Funded by Guangdong Province High-level Clinical Key Specialty （with supporting funds from Shenzhen City） （number， SZGSP013）； Shenzhen Key Medical Discipline （number， SZXK041）； Shenzhen Clinical Medicine Research Center Project （number， 20210617155253001）］

BACKGROUND:Scholars at home and abroad consider New Zealand rabbits to be an ideal model animal because of the similar anatomical morphology of the lumbar spine to that of the human lumbar spine.There is a lack of systematic comparison of different ways to establish rabbit intervertebral disc degeneration models under X-ray guidance. OBJECTIVE:To establish a rabbit model of lumbar disc degeneration using X-ray guided acupuncture,end-plate injection and combined method,and to compare the modeling effects of these three methods. METHODS:Eighteen 6-month-old New Zealand white rabbits were randomly selected and divided into four groups:acupuncture group,endplate injection group,combined group and blank control group.In the acupuncture group,three consecutive segments of the intervertebral discs(L2/3,L3/4,L4/5)were needled and modeled;in the endplate injection group,50 μL of anhydrous ethanol was injected at a single point on the endplates of the three consecutive segmental discs;in the combined group,three consecutive segmental intervertebral discs were needled and injected with 50 μL of anhydrous ethanol at four azimuthal points on the endplates of the corresponding segmental discs;and the blank control group received no interventions.X-ray examination was performed to measure the disc height index at 2,4,and 8 weeks after surgery.The intervertebral disc tissues were then taken for anatomical observation and pathological examination. RESULTS AND CONCLUSION:(1)Anatomical examination showed that fibrous annulus rupture,nucleus pulposus degeneration,and total disc structure disorder were the main manifestation in the acupuncture group,endplate injection group,and combined group,respectively.(2)X-ray examination showed that the disc height index showed the most obvious reduction in the acupuncture group at 2 weeks after operation,significant reductions in the endplate injection group at 2 and 4 weeks after operation,and significant reductions in the combined group at 2,4,and 8 weeks after operation.(3)Pathological examination showed that the fibrous ring structure was damaged and the inner annulus fibrosus protruded inward in the acupuncture group;endplate fissure,disordered arrangement and nucleus loss were observed in the endplate injection group;total disc structure disorder with the nucleus pulposus losing water and shrinking and no obvious border with the broken annulus fibrosus was found in the combined group.To conclude,acupuncture,endplate injection and the modified endplate injection method can establish the rabbit intervertebral disc degeneration model.Compared with the single method,the modified endplate injection method can greatly accelerate and aggravate the degeneration of the intervertebral disc,and can effectively shorten the experiment period.

Aim Mouse model of myocardial hypertro-phy was established via intraperitoneal injection of iso-proterenol(ISO)in mice.This approach allows for an in-depth investigation into the pharmacological effects and mechanisms of action of emodin,offering novel in-sights and directions for the improvement of myocardial hypertrophy.Methods The mice were randomly di-vided into the following groups:control group(CON),emodin group(EMO),MAPK activator control group(EMO+Ani),model group(ISO),treatment group(ISO+EMO),and activator intervention group(ISO+EMO+Ani).After treatment with emodin and inter-vention with MAPK activator,the heart weight ratio and cardiac size of each group were observed.Hematoxy-lin-eosin(HE)staining was used to observe the patho-logical changes in cardiac tissue,and kits were utilized to measure the levels of GSH,LDH,and MDA in the serum.Western blot was employed to detect the protein expression levels of inflammatory and oxidative factors,as well as p-p38,p-ERK,p38,and ERK in cardiac tis-sue.Results Emodin can significantly inhibit the production of myocardial inflammatory and oxidative factors induced by ISO,thereby effectively alleviating the degree of myocardial hypertrophy and fibrosis.Af-ter the p38/ERK signaling pathway was specifically ac-tivated by farnesol,the improvement effect of emodin on myocardial hypertrophy was weakened.Further comparison revealed that,compared with the myocardi-al hypertrophy pathological model group,the pathologi-cal protein expression levels in the farnesol-treated group showed no significant difference,and were even higher in some indicators.Conclusion Emodin can effectively inhibit the release of inflammatory factors and improve the state of oxidative stress by modulating the p38/ERK signaling pathway,thereby exerting an ameliorative effect on myocardial hypertrophy.

Objective To compare the effects of stereotactic endoscopic hematoma evacuation on elderly patients with hypertensive intracerebral hemorrhage.Methods A total of 220 patients with hypertensive intracerebral hemorrhage in the basal ganglion admitted to our hospital from January 2020 to December 2023 were retrospectively recruited.According to their surgical treat-ment,they were divided into an observation group(stereotactic endoscopic hematoma evacuation,n=100)and a control group(craniotomy hematoma removal surgery,n=120).Postoperative recovery was observed and compared between the two groups.Results There was no significant difference in operation time between the observation group and the control group(94.56±14.75 min vs 94.03±14.50 min,t=0.268,P=0.789).No statistical differences were observed in the NIHSS score before operation between the two groups(P=0.058),but the observation group obtained significantly lower NIHSS scores in 3 and 6 months after surgery(5.90±4.02 vs 9.23±3.47,P=0.000;4.54±2.56 vs 6.50±3.07,P=0.000).There were no significant differences in GOS score and incidence of postoperative complications between the two groups(P＞0.05).Conclusion Stereotactic endoscopic hematoma evacuation can improve postoperative neurological function in patients with hypertensive intracerebral hemorrhage in the basal ganglia region.

Aim To compare the observation results of atomic force microscopy(AFM)and scanning electron microscopy(SEM),and to summarize the main problems and solutions of AFM in observing biological macromolecules,using the observa-tion subjects of protein samples purified by our research group.Methods The protein samples were diluted to 15 nmol·L-1 with PBS,fixed on glass slides,silicon wafers,and mica sheets,dried,and made into solid-phase observation samples.SEM sam-ples were plated with platinum before observation.The surface structures of proteins were observed using AFM and SEM,sample heights were calculated,and differences in results were com-pared.Results Protein samples with positive charges tended to shift to the right during observation due to the repulsion of the AFM probe;mica sheets could effectively eliminate the positive charge of proteins to avoid sample movement;PBS provided a stable environment for protein samples,but the crystallization of PBS salts interfered with probe operation and imaging clarity;SEM samples needed to be plated with platinum before observa-tion and could not achieve the precision of AFM.Conclusions Both AFM and SEM can directly observe protein structures in vitro,with AFM providing higher precision results;when protein sample stability permits,ultrapure water is preferred as the sol-vent carrier,and volatile liquids such as ethanol can also serve as solvent carriers.The application of AFM offers a new approach for pharmacological studies on interactions between biological macromolecules.

Objective To evaluate the application of high-resolution magnetic resonance vessel wall imaging(HRMR-VWI)in identifying high-risk features of intracranial atherosclerotic plaques,and to analyze the correlation between plaque characteristics and stroke recurrence under varying degrees of stenosis.Methods The data from 368 patients with intracranial atherosclerotic stenosis(ICAS)across two centers were retrospectively analyzed.Based on the degree of stenosis,all patients were categorized into mild-to-moderate stenosis group(luminal stenosis<70%,n=155)and severe stenosis group(luminal stenosis≥70%,n=213).HRMR-VWI images and clinical information of the patients were collected and analyzed,and the culprit plaques were quantitatively analyzed.Univariate and multivariate logistic regression analyses were employed to identify the risk factors for stroke recurrence,and the predictive performance was evaluated using the area under the curve(AUC)of the receiver operating characteristic(ROC)curve.Results Higher normalized wall index(NWI)[odds ratio(OR)=1.082,95%confidence interval(CI)1.050-1.118,P<0.05]and the presence of intraplaque hemorrhage(IPH)(OR=1.843,95%CI 1.120-3.036,P<0.05)were risk factors for stroke recurrence in all patients.And these two factors were also significant in the mild-to-moderate stenosis group(NWI:OR=1.088,95%CI 1.009-1.186,P<0.05;IPH:OR=4.049,95%CI 1.227-16.065,P<0.05).A predictive model for stroke recurrence was constructed using the combination of IPH and NWI,with the best performance in the mild-to-moderate stenosis group(AUC=0.813,95%CI 0.723-0.906).Conclusion In patients with luminal stenosis<70%,the increase of NWI and the presence of IPH have been validated as significant and effective indicators for predicting stroke recurrence,demonstrating notable predictive performance.In contrast,among patients with luminal stenosis≥70%,the utility of plaque characteristics in predicting stroke recurrence is relatively lower,indicating that the correlation between plaque characteristics and stroke recurrence varies across different degrees of stenosis.

Background and purpose:Thyroid cancer is the most common malignant endocrine tumor,particularly prevalent among the Asian population.The overall survival for thyroid cancer patients is relatively high,but there are significant survival differences among patients.Based on long-term hospital-based cancer registry database,this study analyzed the 10-year observed overall survival(OS)rate of thyroid cancer cases and the distribution of causes of death,providing real-world evidences to further survival management of thyroid cancer in China.Methods:A total of 55343 thyroid cancer patients who underwent treatment at Fudan University Shanghai Cancer center from 2005 to 2021 were included in this study.Clinical information and the follow-up endpoint data were collected through medical records review,telephone visits and death registry data linkage.The last follow-up date was October 31,2024.Kaplan-Meier method was applied in evaluating the OS rate,and survival data were described by different subgroups as age group,gender,treatment period,tumor staging and pathological characteristics.The standardized mortality ratio(SMR)and absolute excess risk(AER)were calculated using general Shanghai population as the reference,and the mortality risk was described by gender,age at diagnosis and histological subtype.Results:With a median follow-up time of 63.01 months,the overall 1-,3-,5-and 10-year OS rates of thyroid cancer patients were 99.67%(95%CI:99.62%-99.72%),99.11%(95%CI:99.03%-99.19%),98.48%(95%CI:98.36%-98.60%)and 95.81%(95%CI:95.50%-96.11%),respectively.The 10-year OS rates of stage Ⅰ,Ⅱ,Ⅲ and Ⅳ were 97.99%(95%CI:97.70%-98.28%),89.80%(95%CI:87.24%-92.37%),77.84%(95%CI:70.76%-84.92%)and 62.95%(95%CI:55.37%-70.54%),respectively.The differences in OS among patients with different age,gender and histological classification were significant.1256(2.27%)deaths occurred,of which 18.63%,50.88%and 7.32%were attributable to thyroid cancer,other cancers and cardiovascular disease(CVD),respectively.Compared with the general population,patients with different subtypes of thyroid cancer had higher all-cause mortality rates,progressively increasing with papillary,follicular,medullary and anaplastic thyroid carcinoma/poorly differentiated carcinoma.Compared with general population,the death risk was 2.24 times higher in papillary thyroid cancer patients(95%CI:2.06-2.44),9.94 times higher in follicular thyroid cancer patients(95%CI:6.79-14.09),12.16 times higher in medullary thyroid cancer patients(95%CI:8.05-17.69),and the highest risk was observed in patients with anaplastic thyroid carcinoma/poorly differentiated carcinoma[SMR=79.67(95%CI:58.38-106.31),AER=766.01/1 000 person-years].Conclusion:The 10-year long survival data and cause of death for thyroid cancer patients with different histological types were reported in China based on a large single institution hospital-based cancer registry database.Staging and histological characteristics were the most important factors directly affected the survival.Early diagnosis and individualized treatment are crucial for improving prognosis.

Accurate prediction of drug responses in cancer cell lines(CCLs)and transferable prediction of clinical drug responses using CCLs are two major tasks in personalized medicine.Despite the rapid advancements in existing computational methods for preclinical and clinical cancer drug response(CDR)prediction,chal-lenges remain regarding the generalization of new drugs that are unseen in the training set.Herein,we propose a multimodal fusion deep learning(DL)model called drug-target and single-cell language based CDR(DTLCDR)to predict preclinical and clinical CDRs.The model integrates chemical descriptors,mo-lecular graph representations,predicted protein target profiles of drugs,and cell line expression profiles with general knowledge from single cells.Among these features,a well-trained drug-target interaction(DTI)prediction model is used to generate target profiles of drugs,and a pretrained single-cell language model is integrated to provide general genomic knowledge.Comparison experiments on the cell line drug sensitivity dataset demonstrated that DTLCDR exhibited improved generalizability and robustness in predicting unseen drugs compared with previous state-of-the-art baseline methods.Further ablation studies verified the effectiveness of each component of our model,highlighting the significant contribution of target information to generalizability.Subsequently,the ability of DTLCDR to predict novel molecules was validated through in vitro cell experiments,demonstrating its potential for real-world applications.Moreover,DTLCDR was transferred to the clinical datasets,demonstrating satisfactory performance in the clinical data,regardless of whether the drugs were included in the cell line dataset.Overall,our results suggest that the DTLCDR is a promising tool for personalized drug discovery.