BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:The quadriceps strength of patients with osteoporosis and sarcopenia is significantly reduced,which can further reduce the function of the knee joint,affect the function of the lower limbs and even lead to a decrease in whole-body coordination.It is speculated that a reasonable quadriceps training program and personalized guidance are beneficial to the recovery of knee joint function in patients with osteoporosis and sarcopenia.OBJECTIVE:To observe the effect of short-term moderate-intensity resistance rehabilitation training on the mass and function of the quadriceps and knee joint function in patients with osteoporosis and sarcopenia.METHODS:Using the integrated physical examination and rehabilitation model,375 patients with osteoporosis and sarcopenia were screened at the Health Management Center of Shanghai Public Health Clinical Center.They underwent 12 weeks of combined/comprehensive exercise rehabilitation based on resistance exercise,including quadriceps resistance isotonic and isometric contraction training twice a week(3-5 sets each time,10-15 minutes per set)and aerobic exercise/balance exercise two or three times a week(30 minutes each time).Assessments and data collection were performed before rehabilitation training,12 weeks after rehabilitation training,and at follow-up 12 weeks after stopping rehabilitation training,mainly including knee joint range of motion and proprioception,quadriceps muscle strength,and cross-sectional area(magnetic resonance imaging results),pain,knee joint function(Hospital for Special Surgery score)and walking function("up-and-go"time and 6 m pace test results)as well as the patient's psychological status assessment.RESULTS AND CONCLUSION:All 375 patients completed 12 weeks of rehabilitation training and 12 weeks of follow-up without any adverse events.(1)Compared with before training,the patients' gait speed and knee range of motion increased significantly after 12 weeks of rehabilitation training(P＜0.01),the time of"stand-to-walk"decreased(P＜0.01),and the proprioception of the knee joint and the strength of the quadriceps femoris were significantly improved(P＜0.01);and at the follow-up visit 12 weeks after stopping training,the above indicators and functions of the patients were well maintained(P＞0.05).(2)Magnetic resonance imaging results showed that the effective cross-sectional area of the quadriceps femoris did not improve significantly after 12 weeks of rehabilitation training(P＞0.05);but the Hospital for Special Surgery score of knee joint function increased significantly(P＜0.01),and the visual analog pain scale score decreased significantly(P＜0.01),suggesting that this may be related to the improvement of quadriceps femoris quality by resistance rehabilitation training.(3)The results of the Hospital Anxiety and Depression Scale score showed that the anxiety and depression scores of the patients continued to decrease,both at 12 weeks of rehabilitation training and at 12 weeks after stopping training(P＜0.01).It is suggested that resistance rehabilitation training of the quadriceps can help patients with osteoporosis and sarcopenia to restore quadriceps muscle strength,increase range of motion,improve proprioception and joint stability,thereby enhancing knee joint function,reducing pain,improving depression and anxiety,and to a certain extent promoting the coordinated recovery of the musculoskeletal system.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:The quadriceps strength of patients with osteoporosis and sarcopenia is significantly reduced,which can further reduce the function of the knee joint,affect the function of the lower limbs and even lead to a decrease in whole-body coordination.It is speculated that a reasonable quadriceps training program and personalized guidance are beneficial to the recovery of knee joint function in patients with osteoporosis and sarcopenia.OBJECTIVE:To observe the effect of short-term moderate-intensity resistance rehabilitation training on the mass and function of the quadriceps and knee joint function in patients with osteoporosis and sarcopenia.METHODS:Using the integrated physical examination and rehabilitation model,375 patients with osteoporosis and sarcopenia were screened at the Health Management Center of Shanghai Public Health Clinical Center.They underwent 12 weeks of combined/comprehensive exercise rehabilitation based on resistance exercise,including quadriceps resistance isotonic and isometric contraction training twice a week(3-5 sets each time,10-15 minutes per set)and aerobic exercise/balance exercise two or three times a week(30 minutes each time).Assessments and data collection were performed before rehabilitation training,12 weeks after rehabilitation training,and at follow-up 12 weeks after stopping rehabilitation training,mainly including knee joint range of motion and proprioception,quadriceps muscle strength,and cross-sectional area(magnetic resonance imaging results),pain,knee joint function(Hospital for Special Surgery score)and walking function("up-and-go"time and 6 m pace test results)as well as the patient's psychological status assessment.RESULTS AND CONCLUSION:All 375 patients completed 12 weeks of rehabilitation training and 12 weeks of follow-up without any adverse events.(1)Compared with before training,the patients' gait speed and knee range of motion increased significantly after 12 weeks of rehabilitation training(P＜0.01),the time of"stand-to-walk"decreased(P＜0.01),and the proprioception of the knee joint and the strength of the quadriceps femoris were significantly improved(P＜0.01);and at the follow-up visit 12 weeks after stopping training,the above indicators and functions of the patients were well maintained(P＞0.05).(2)Magnetic resonance imaging results showed that the effective cross-sectional area of the quadriceps femoris did not improve significantly after 12 weeks of rehabilitation training(P＞0.05);but the Hospital for Special Surgery score of knee joint function increased significantly(P＜0.01),and the visual analog pain scale score decreased significantly(P＜0.01),suggesting that this may be related to the improvement of quadriceps femoris quality by resistance rehabilitation training.(3)The results of the Hospital Anxiety and Depression Scale score showed that the anxiety and depression scores of the patients continued to decrease,both at 12 weeks of rehabilitation training and at 12 weeks after stopping training(P＜0.01).It is suggested that resistance rehabilitation training of the quadriceps can help patients with osteoporosis and sarcopenia to restore quadriceps muscle strength,increase range of motion,improve proprioception and joint stability,thereby enhancing knee joint function,reducing pain,improving depression and anxiety,and to a certain extent promoting the coordinated recovery of the musculoskeletal system.

Phase Ⅰ clinical trials play a crucial role in the research and development of new drugs, serving as the initial studies to assess their safety, tolerability, effectiveness, and pharmacokinetic properties in humans. These trials involve uncertainties regarding safety and efficacy. Comprehensive management of all aspects of phase Ⅰ clinical trials for anti-tumor drugs is crucial to protect the rights and safety of participants. This article provides an in-depth analysis of the key points and precautions necessary for effective quality control throughout the process. The analysis is informed by guidelines such as the “Good Clinical Practice for Drugs” “Key Points and Judgment Principles for Drug Registration Verification” “Key Points and Judgment Principles for Supervision and Inspection of Drug Clinical Trial Institutions” and the standard operating procedures for quality control of the center. Topics discussed include informed consent, inclusion criteria, experimental drugs, biological samples, adverse events, and serious adverse events. The goal is to standardize quality control in phase Ⅰ clinical trials of anti-tumor drugs, ensure the authenticity and reliability of clinical trial data, and protect the rights and safety of participants.

Objective:To evaluate the efficacy and safety of regional citrate anticoagulation (RCA) during plasma exchange (PE) in pediatric patients.Methods:We conducted a retrospective analysis of 12 critically ill children admitted to the Pediatric Intensive Care Unit (PICU) of Jinan Children's Hospital, who underwent 28 PE sessions with RCA between December 2023 and August 2024. Clinical records were reviewed to assess bleeding events, extracorporeal circuit performance, and changes in arterial blood gas parameters, serum total calcium (Ca tot), and activated clotting time before and after treatment. Results:No patients exhibited signs of increased bleeding. In one case, the procedure was discontinued prematurely due to elevated venous pressure. A significant decrease in ionized calcium (Ca ion) was observed 0.5 hours post-treatment. At the end of PE, pH, HCO 3?, base excess (BE), lactate, PaCO 2, Ca tot, and Na + levels increased, while K + and Ca ion levels decreased, with all changes being statistically significant. Four hours post-treatment, pH, HCO 3?, BE, PaCO 2, and Na + remained elevated, whereas Ca ion, lactate, and K + returned to baseline. By 12–15 hours post-treatment, all parameters—including pH, HCO 3?, BE, PaCO 2, Na +, K +, Ca ion, and lactate—had normalized, showing no significant differences from pre-treatment levels. Conclusions:RCA provides effective extracorporeal anticoagulation during pediatric PE without increasing bleeding risk. However, metabolic complications—primarily metabolic alkalosis—are common. These disturbances typically resolve spontaneously and do not lead to severe adverse events. While no ideal anticoagulant for PE has yet been established, RCA remains a safe and effective option, particularly for pediatric patients at higher risk of bleeding.

Objective To verify the safety and effectiveness of a new percutaneous controllable curved plasma radiofrequency instrument for nucleus pulposus ablation. Methods A new percutaneous controllable curved plasma radiofrequency instrument were designed (controllable curved group), and its ablation effect was compared with the currently used straight head non-bendable plasma ablation instrument (non-bendable group) on gross specimens. The ablation instrument was placed through the right intervertebral foramen, and continuous ablation on the same intervertebral disc was conducted for three times. The ablation range and trajectory were recorded, and the temperature changes in the front, back, left, and right of the ablation center during and 15 seconds after ablation were monitored by the inserted temperature probe. Results There were no difference in temperature changes in the front, back, right regions of the ablation center during and 15 seconds after ablation between the two groups. The temperature changes in the left region of the ablation center both during and 15 seconds after 3rd ablation were larger than those in the non-bendable group (P＜0.01). Compared with the non-bendable group, the controllable curved group achieved angle control and larger single ablation area (2.282 5 mm² vs 1.135 8 mm², P＜0.000 1). Conclusions This new percutaneous controllable curved plasma ablation instrument can achieve angle control and ablation on the side opposite to the puncture site, increase ablation volume, and is safe.

Objective:To investigate the molecular mechanisms of bexarotene in treating double hit lymphoma(DHL)based on Weighted Gene Co-expression Network Analysis(WGCNA),thereby providing potential targets and experimental evidence for DHL treatment.Methods:The gene expression datasets GSE44164 and GSE43677 were downloaded from the Gene Expression Omnibus(GEO)database,and differentially expressed genes(DEGs)were identified.WGCNA was employed to identify gene modules associated with DHL.A protein-protein interaction(PPI)network was constructed to screen for key hub genes.Drug-gene association analysis was conducted using the EpiMed platform to identify potential targeted drugs for DHL.The effects of bexarotene on DHL cell proliferation and key protein expression were evaluated using the CCK-8 assay and Western blotting(WB),and its effects on cell apoptosis was evaluated using flow cytometry.Results:WGCNA identified a turquoise module highly associated with DHL,and 10 hub genes(COL1A2,COL3A1,MMP2,COL5A2,DCN,BGN,FN1,MMP9,FBN1,and LUM)were screened from the PPI network.Drug association analysis nominated bexarotene as a potential therapeutic agent.In vitro validation demonstrated that bexarotene significantly inhibited U2932 cell viability(P<0.05),promoted cell apoptosis(P<0.001),and downregulated c-Myc and COL1A2 expression(P<0.05).Conclusion:Bexarotene may exert anti-DHL effects by suppressing the c-Myc signaling pathway and modulating extracellular matrix-related genes.Further studies are warranted to validate its in vivo efficacy and potential for combination therapy.

In July 2024,the Diagnosis Related Groups(DRG)2.0 is released based on the Notice from the National Healthcare Security Administration on Issuing the DRG 2.0 and Deepening the Relevant Work.Compared with DRG 1.1,version 2.0 was established based on a wider range of suggestions regarding the Adjacent Diagnosis Related Groups(ADRG),Major Comorbidity or Complication(MCC),and Comorbidity or Complication(CC)from various institutions.A list of disease diagnoses and surgical operations that are not used as grouping rules was compiled,and grouping efficacy was further improved by upgrading the algorithms for MCC and CC with the help of AI.Meanwhile,it is necessary to pay more attention to the number of cases of ADRG,the better methods to list the MCC/CC,the suggestions of various doctors and continuously standardize the data and update the grouping scheme of DRG.

Perception of recurrence risk in cardiovascular disease (CVD) patients plays a significant role in aspects such as their quality of life and treatment adherence. This paper reviews the theoretical foundations of recurrence risk perception, the conceptual origins and developmental process, measurement tools, influencing factors of recurrence risk perception in CVD patients, and research progress of recurrence risk perception in CVD management. The aim is to provide a basis for developing scientifically effective intervention measures for CVD patients in the future.