OBJECTIVE: To compare the biomechanical properties of personalized Y-shaped plates with horizontal plates, vertical plates, and traditional Y-shaped plates in the treatment of distal humeral intra-articular fractures through finite element analysis, and to evaluate their potential for clinical application. METHODS: The study selected a 38-year-old male volunteer and obtained a three-dimensional model of the humerus by scanning his upper limbs using a 64-slice spiral CT. Four types of fracture-internal fixation models were constructed using Mimics 19.0, Geomagic Wrap 2017, Creo 6.0, and other software: horizontal plates, vertical plates, traditional Y-shaped plate, and personalized Y-shaped plate. The models were then meshed using Hypermesh 14.0 software, and material properties and boundary conditions were defined in Abaqus 6.14 software. AnyBody 7.3 software was used to simulate elbow flexion and extension movements, calculate muscle strength, joint forces, and load torques, and compare the peak stress and maximum displacement of the four fixation methods at different motion angles (10°, 30°, 50°, 70°, 90°, 110°, 130°, 150°) during elbow flexion and extension. RESULTS: Under dynamic loading during elbow flexion and extension, the personalized Y-shaped plate exhibits significant biomechanical advantages. During elbow flexion, the peak internal fixation stress of the personalized Y-shaped plate was (28.8±0.9) MPa, which was significantly lower than that of the horizontal plates, vertical plates, and traditional Y-shaped plate ( P<0.05). During elbow extension, the peak internal fixation stress of the personalized Y-shaped plate was (18.1±1.6) MPa, which was lower than those of the other three models, with significant differences when compared with horizontal plates and vertical plates ( P<0.05). Regarding the peak humeral stress, the personalized Y-shaped plate model showed mean values of (10.9±0.8) and (13.1±1.4) MPa during elbow flexion and extension, respectively, which were significantly lower than those of the other three models ( P<0.05). Displacement analysis showed that the maximum displacement of the humerus with the personalized Y-shaped plate during elbow flexion was (2.03±0.08) mm, slightly higher than that of the horizontal plates, but significantly lower than that of the vertical plates, showing significant differences ( P<0.05). During elbow extension, the maximum displacement of the humerus with the personalized Y-shaped plate was (1.93±0.13) mm, which was lower than that of the other three models, with significant differences when compared with vertical plates and traditional Y-shaped plates ( P<0.05). Stress contour analysis showed that the stress of the personalized Y-shaped plate was primarily concentrated at the bifurcation of the Y-shaped structure. Displacement contour analysis showed that the personalized Y-shaped plate effectively controlled the displacement of the distal humerus during both flexion and extension, demonstrating excellent stability. CONCLUSION The personalized Y-shaped plate demonstrates excellent biomechanical performance in the treatment of distal humeral intra-articular fractures, with lower stress and displacement, providing more stable fixation effects.
Humans ; Male ; Adult ; Healthy Volunteers ; Finite Element Analysis ; Tomography, Spiral Computed ; Models, Anatomic ; Biomechanical Phenomena ; Humeral Fractures, Distal/surgery* ; Fracture Fixation, Internal/instrumentation* ; Bone Plates ; Computer Simulation ; Precision Medicine/methods* ; Elbow Joint/surgery* ; Elbow/surgery* ; Humerus/surgery* ; Torque ; Stress, Mechanical ; Intra-Articular Fractures/surgery* ; Prosthesis Design/methods* ; Imaging, Three-Dimensional ; Range of Motion, Articular

Urolithiasis is a common and complex disease of the urinary system, which can cause urinary tract blockage, urinary tract infection, and even damage to urinary system-related tissues. Although urolithiasis can be cured, its high recurrence rate and the development of chronic kidney disease in some patients have drawn the attention of nephrologists. Although the application of extracorporeal lithotripsy, percutaneous nephrolithotomy and other minimally invasive techniques have made the treatment of urolithiasis more efficient, pharmacotherapy plays an indispensable role in reducing their morbidity and recurrence rates. Traditional Chinese medicine (TCM) has been used for treatment and prevention of urolithiasis in developing countries for centuries, known for its unquestionable efficacy and safety. This article reviews the progress of clinical trials and pharmacological studies on the treatment of urolithiasis with Chinese herbal medicines (CHMs). The mechanism of CHMs in the treatment of urolithiasis mainly involve preventing further growth and aggregation of urolithiasis, reducing the PH of urine, promoting calculus dissolution. Furthermore, some CHMs can increase urine output, relax smooth muscles, and promote the removal of calculus. These findings provide new treatment strategies and options for urolithiasis and secondary kidney damage.

In order to meet the social demand for ultrasound talents, a layered training system of ultrasound medical talents suitable for China's national conditions has been explored. The department of ultrasound of West China Hospital of Sichuan University has formulated and implemented a "three-layers" ultrasound education and training system in combination with its own reality. The first layer mainly refers mastering the basic ultrasound examination ability mainly through relevant ultrasound theoretical knowledge and basic operation skills training. The second layer is based on the first level to further master the ability of ultrasound diagnosis and differential diagnosis of common and frequently occurring diseases in various systems, and to be capable of engaging in basic ultrasound teaching and scientific research. The third layer means mastering the ability of ultrasound diagnosis, evaluation and interventional diagnosis and treatment of difficult and specialized diseases, grasping the latest development direction of the sub-specialty, and having the ability to engage in ultrasound teaching and clinical research. The results show that the "three-layers" ultrasound education and training system conforms to China's national conditions and is worthy of reference and promotion.

Objective:To assess the relationship between body mass index (BMI) and death risk of cardiovascular disease (CVD) in rural male population.Methods:22 282 men aged 40 years older in Tanghe county and Fenghuang county from the cohort of the "Prospective Study on Adult Behavior and Health Risk Factors in China" were selected as subjects of this study. Cox regression model was used to calculate the hazard ratios ( HRs) of the death of CVD during the follow-up period with different BMI groups at baseline. Results:The average follow-up period in the two counties was (19.1±8.7) years and 10 828 (48.6%) people died during the follow-up period. 4 504 deaths were attributed to CVD. Among the deaths of CVD, 1 279 cases died of ischemic heart disease (IHD), ischemic stroke (IS) died in 1 201, cases died of died of 1 317 hemorrhagic stroke (HS), other 707 cases. Compared to population with BMI<18 kg/m 2, Cox regression model (adjusting factors of region, age, nationality, education level, occupation, smoking, drinking, blood pressure, blood pressure, etc.) showed that people with BMI between 20-22 kg/m 2 had the lowest risk of CVD death ( HR=0.95, 95 %CI: 0.83-1.09). But the difference was not statistically significant among each BMI group ( P>0.05). The risk of IHD death was the lowest in the population with BMI between 20-22 kg/m 2 ( P<0.05) ( HR=0.64, 95 %CI: 0.52-0.80). There was no statistically significant difference between the risk of IHD death in the population with BMI≥24 kg/m 2 and that in the population with BMI<18 kg/m 2 ( P>0.05). There was no statistically significant difference between the risk of IS death and BMI ( P>0.05). The death risk of HS in the population with BMI between 18-24 kg/m 2 was higher than that in the population with BMI<18 kg/m 2 ( P<0.05). The death risk of the population with BMI between 26-28 kg/m 2 was the highest ( HR=1.88, 95 %CI:1.18-2.99). Conclusions:The mortality risk of CVD and IHD was the lowest in lean or normal weight group, and HS was higher in overweight group. Maintaining a reasonable weight can reduce the risk of death in patients with CVD.

Child, Preschool ; China ; epidemiology ; Enterovirus A, Human ; genetics ; Female ; Hand, Foot and Mouth Disease ; epidemiology ; Humans ; Infant ; Male ; Molecular Epidemiology

Objective To explore the value of CT spinal angiography with 256 MSCT and fast dynamic contrast-enhanced 3D MR angiography (CE-MRA) at 3.0 T in the diagnosis of spinal vascular malformations by comparing with results of DSA and operation.MethodsSeventeen patients suspected of spinal vascular diseases by initial MR and clinical manifestations all underwent CT spinal angiography.Of them,10 patients underwent MRA,15 patients underwent DSA within 3-5 days,and 8 patients finally underwent surgical treatment.ResultsCTA examination clearly showed the abnormal vascular lesions in 16 of 17 cases,including 7 cases with the diagnosis of spinal dural arteriovenous fistula,7 cases of perimedullary arteriovenous fistula,and 2 cases of spinal arteriovenous malformations. The results were consistent with the diagnosis of DSA or surgery.One case was poorly diagnosed.The feeding vessels were correctly determined in 12 cases,and the level of fistulas were correctly displayed in 12 cases.The level of fistulas and feeding vessels were accurately showed in 7 of 10 cases with MRA,while the other 3 cases exhibited normal with DSA.ConclusionsSpinal angiography with 256 MSCT and CE-MRA at 3.0 T can clearly show the extent of spinal vascular malformations,feeding arteries and fistula location.They are safe,noninvasive,convinient and can shorten the time of DSA diagnosis and treatment.They play an important role in diagnosis and treatment of spinal vascular malformations and postoperative follow-up.

Objective To explore the differences of cultivation and differentiation between cortical neural stem cells(C-NSCs) and mesencephalic neural stem cells(M-NSCs). Methods We dissociated embryonic cortex and ventral mesencephalon respectively,and single cell suspensions were achieved by trypsin digestion and mechanical dissociation in sterile condition.These cells were planted into DMEM/F12 culture medium with B27,bFCF,and then were passaged by mechanical methods and induced to differentiation in DMEM/F12 medium with 10%FBS(without growth factors).For examining the features of C-NSCs and M-NSCs,reverse phasecontrast microscopy,immunocytochemical techniques were applied to detect nestin,NSE,GFAP antigens and the specific antigen(TH) of neurons differentiated from the two kinds of NSCs.We observed and compared the difference of the two kinds of NSCs. Results The NSCs existed both in cortex and ventral mesencephalon of embryonic mice,which expressed nestin and possessed the ability of self-renewing and multipotent, but the density of NSCs in cortex was higher than that in ventral mesencephalon.There were some TH positive cells differentiated from M-NSCs but none came from C-NSCs.Conclusion The proliferative activity of C-NSCs is higher than that of M-NSCs,but more number M-NSCs differentiated into dopaminergic neurons in serum medium.