ObjectiveTo systematically compare the efficacy of different non-invasive brain stimulation (NIBS) techniques on balance function in stroke patients via network meta-analysis. MethodsPubMed, Embase, Web of Science, Cochrane Library, Scopus and CNKI were systematically searched from database establishment to February, 2026. Randomized controlled trials (RCTs) and randomized crossover designs (RCDs) investigating NIBS for post-stroke balance impairment were enrolled. The Cochrane risk of bias assessment tool was used for risk-of-bias assessment; RevMan 5.4 was used for sensitivity analysis, and Stata 18.0 for subgroup analysis and network meta-analysis. ResultsA total of 35 eligible studies (31 RCTs, 4 RCDs) involving 1 226 stroke patients were included. No NIBS modalities might significantly improve the outcome of Timed Up and Go Test, while the effect of transcranial direct current stimulation (tDCS) ranked first on Berg Balance Scale score (SUCRA = 85.9%). Subgroup analyses indicated superior balance benefits in interventions targeting primary motor cortex, with stimulation intensity of 80% to 100% RMT and disease courses ≤ 6 months. ConclusiontDCS may be an optimal intervention for comprehensive balance function after stroke.

Lupus nephritis(LN)is a common and severe complication of systemic lupus erythematosus(SLE).Approximately 10%of patients with severe LN may progress to end-stage renal disease within 10 years of diagnosis,accompanied by high morbidity and mortality.In the field of treatment,glucocorticoids,antimalarials and other conventional agents have remained the mainstay since the early days,and new therapies emerged slowly until belimumab was approved.In recent years,there has been renewed progress in the research and treatment of SLE and LN,with a series of innovative therapies emerging,including biologics such as anti-B cell-activating factor antibodies,anti-CD20 antibodies,anti-CD40 antibodies,and anti-interferon antibodies,as well as small molecule kinase inhibitors.These developments have shifted treatment strategies towards more individualized and precise approaches.However,despite the expanding array of treatment options,many therapeutic needs remain inadequately met.This paper summarizes recent clinical trials and post-hoc analyses of LN,highlighting advances in promising therapeutic strategies.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective: To investigate the prevalence of flat feet and associated factors in school aged children in Kunming City, to provide evidence supporting the prevention of flat feet. Methods: From December 2021 to February 2022, 4 444 children aged 7-13 in five primary schools in Kunming were screened for flat feet with the optical foot assessment and recording device. The incidence of flatfoot was counted, and Logistic regression was used to analyze the influencing factors of flatoccurrence. Results: The overall prevalence rate was 29.10%, of which 21.79% were mild, 52.43% were moderate, 25.78% were severe, 89.10 % were bipedal, and 10.90% were monopedal. The prevalence rates in the 7-year old and 13-year old groups were 36.91% and 10.43%, respectively, and the risk in the former was 5.00 times that in the latter( OR=5.00, 95%CI =3.22-7.52). The prevalence rates in rural and urban students were 38.53%, 22.46%, respectively, and the risk in the former was 2.17 times that in the latter( OR=2.17, 95%CI =1.90-2.47). The prevalence of flat feet in male and female students were 34.21%, 23.29%, respectively, and the risk in male students was 1.71 times higher than that in female students( OR=1.71, 95%CI =1.50-1.95). The incidence of flat feet correlated with BMI, and the risk of flat feet was higher in the group with overweight and obese groups than normal( OR=1.31, 1.10, P < 0.01). Conclusion The prevalence of flat feet in school age children aged 7-13 years decreased with age. The prevalence and risk of flat feet is lower in girls than boys, and the incidence and risk of flat feet are lower in urban than rural children. The incidence of flat feet in most children is moderate, and the risk increased with increasing BMI. For school aged children with flat feet, early prevention, detection and treatment are needed.

Objective:To investigate the efficacy of osteochondral fragment fixation using bioabsorbable pins for Hepple Ⅱ osteochondral lesions of the talus (OLT) in adolescents.Methods:Retrospective case analysis was used. The clinical data and follow-up results of 13 adolescent patients (13 feet) with Hepple Ⅱ OLT were all treated with osteochondral fragment fixation using bioabsorbable pins admitted to Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from January 2017 to December 2021 were retrospectively analyzed. There were 7 males and 6 females, with 13 right feet. The age was (14.85±2.23) years old, ranged from 12 to 18 years old. According to the American orthopedic foot and ankle society (AOFAS) ankle-hindfoot score, visual analogue scale (VAS) and SF-36 score before operation and at the last follow-up were used to evaluate the efficacy and function of the patients. Measurement data with normal distribution were represented as mean ± standard deviation( ± s), and the comparison between groups was conducted using the t-test; The mearsurement data with skewness distribution were expressed by M( Q1, Q3), and rank-sum test was used for inter-group comparison. Results:Thirteen adolescent patients (13 feet) with Hepple Ⅱ OLT underwent surgery successfully and were followed up for (25.54±9.95) months. All wounds healed by first intention, and no complications such as wound infection and delayed healing occurred. Preoperative AOFAS ankle-posterior foot score, VAS and SF-36 score were 58.62±3.55, 7.00 (6.50, 8.00) and 68.38±4.81, respectively. At the last follow-up, the scores were 97.38±2.73, 1.00 (0.00, 1.00), 91.15±4.28, respectively, and the results were significantly improved at the last follow-up, with the difference between the two groups statistically significant( P<0.05). Conclusion:Osteochondral fragment fixation using bioabsorbable pins which can promote cartilage repair, significantly improve symptoms, and achieve better clinical satisfaction with fewer complications, is a safe and effective surgical treatment option for Hepple Ⅱ OLT in adolescents with satisfactory short-term clinical outcomes.

Objective: To evaluate the clinical value of high-risk humam papillomavirus(HR-HPV) genotyping in diagnosis of cervical lesions. Methods: Between December 2012 and March 2015, a total of 4 095 women who were diagnosed as cervical inflammation-related disease were chosen to be evaluated in gynecological clinic at Taizhou Hospital of Zhejiang Province. All the women experienced HPV genotyping, analysis of the epidemiological characteristics of HPV types in Taizhou area and theresult of histopathologic diagnosis of HPV positive women. Logistic regression analysis was used to estimate the risk of HR-HPV genotyping in cervical lesion progression. Results: Overall, HPV52 was the most prevalent genotype, followed by HPV16, 58, 39 and 56. Among the women with cervical intraepithelial neoplasm (CIN), HPV16 was the most frequent type, followed by HPV52, 58, 33 and 31. Logistic regression analysis showed that a higher risk of CIN2+ for women infected with HPV16 or HPV33, the regression coefficients OR were 3.670(95%CI: 2.399-5.612, P<0.05) and 2.045(95%CI: 1.087-3.848, P<0.05), respectively. Logistic regression analysis showed that a higher risk of CIN2+ for NILM with positive HPV16, and the regression coefficients OR were 2.539(95%CI: 1.622-3.976, P=0.000); the ASCUS with positive HPV16 and 58 had higher risk of CIN2+ , the regression coefficients OR were 1.911(95%CI: 0.530-6.893) and 1.757(95%CI: 0.557-5.548), respectively. Conclusions HPV genotyping has important clinical value to detect precancerous cervical lesions, especially when cervical cytology is negative, in management of patiemts with atypical squamous cells of an undertermined significance(ASCUS) or low grade squamous intraepithelial lesion(LSIL).

Objective: To study the preferred colonization sites of O1 Vibrio cholerae (V.cholerae) and the colonization ability difference for O1 and O139 V. cholerae on soft-shelled turtle's surface. Methods: 8 O1 and O139 V. cholerae strains were obtained from branch of diarrheal diseases, Chinese center for disease control and prevention. 63 soft-shelled turtles weighing 150 g and 9 cm in length (diameter of calipash) were selected for use in the study. The preferred colonization sites and proliferation trend were studied by using bioluminescent imaging method. The colonization factors for O1 V. cholerae strains were studied by constructing colonization gene mutant strains (VC1897dmshA, VC1897dgbpA and VC1897dtcpA), performing competition colonization assays and analyzing the competitive indexes. After pairing off O1 and O139 strains respectively to perform 16 competition groups, the colonization difference of these two strains were studied by competition colonization assays. Results: The colonization sites by V. cholerae on soft-shelled turtles surfaces was clustered. More V. cholerae strains colonized on turtle's calipash and carapace on dorsal side and less strain colonized on ventral side. The competition colonization assays showed that colonization ability of O1 serogroup mshA mutant strains were 7.26 times lower than VC1897dlacZ. Besides, the CI value (O139/O1) of 11 out of the 16 competition groups were greater than 2 (between 2.07 and 59.84). Two groups showed values of 1.43 and 0.93 respectively and 3 groups lower than 0.7. Conclusion The preferred colonization sites for O1 V. cholerae strains on body surface were observed.MSHA was one of the main colonization factors for its colonization. Our study suggested that in general, O139 V. cholerae strains have stronger colonization ability than O1 strains. Besides, strains isolated from soft-shelled turtles tend to have stronger colonization ability than strains isolated from patients.