Background: Chinese herbal pieces are an essential component of traditional Chinese medicine. Accurate identification and classification of these materials are crucial in clinical practice. Objective: This study aims to enhance the recognition efficiency of Chinese herbal pieces using deep learning technology, while addressing the limitations of traditional manual classification methods in terms of both quality and efficiency. Methods: A comprehensive dataset containing 201 types of Chinese herbal pieces was established. Based on Real-time Detection Transformer (RT-DETR), we designed and integrated a Feature-focused Diffusion Network (FDN), resulting in an improved model termed RT-DETR-FDN. The proposed FDN includes a Feature-focus Module and a feature diffusion mechanism, enabling the model to capture more extensive feature information from Chinese herbal pieces and diffuse it across multiple detection scales. Results: Experimental results show that RT-DETR-FDN achieved a precision of 0.925, a recall of 0.943, and an mAP50-95 of 0.851. In addition, the model was compared with representative You Only Look Once series models commonly used in object detection. Compared with these models, RT-DETR-FDN achieved higher recognition accuracy while maintaining a lightweight architecture. Conclusion: This study integrates deep learning with traditional Chinese medicine, providing a more effective solution for the recognition of Chinese herbal pieces.

Objective·To fabricate a 3D-printed dental crown and bridge resin slurry using digital light processing(DLP)technology,investigate the influence of different printing parameters on its mechanical properties,determine the optimal printing parameters,and optimize the composition ratio of DLP-printed crown and bridge resin.Methods·Based on the viscosity characteristics of the mixture,the optimal ratio of urethane dimethacrylate(UDMA)to poly(propylene glycol)dimethacrylate(PPGDMA)was explored.After silanizing silicon dioxide(SiO2),it was mixed with UDMA,PPGDMA,and 2,4,6-trimethylbenzoyl bis(p-tolyl)phosphine oxide(TMO)to prepare DLP-printed dental crown and bridge resin slurries with different solid contents,and their rheological properties were tested.The Beer-Lambert equation was used to calculate the light penetration depth and critical exposure energy of the printing slurry.Based on these values,different exposure intensities,exposure times,post-curing times,and layer thicknesses were set respectively to carry out a series of printing experiments.By comparing and analyzing the flexural strength of the products under different printing parameters,the optimal printing parameter combination was screened out.Results·Viscosity tests showed that the optimal UDMA-to-PPGDMA ratio was 6∶4.The rheological behavior of printing slurries with different solid contents was tested,and the results showed that the DLP-printed dental crown and bridge resin with a solid content of 22%exhibited the best printing performance.According to the Beer-Lambert analysis,the light penetration depth Dp of the printing slurry was 119.79 μm,and the critical exposure energy Ec was 25.54 mJ/cm2.When the exposure intensity was 20 mW/cm2,the flexural strength reached a maximum of(132.39±8.92)MPa,and the difference was statistically significant(P<0.05).The flexural results of different exposure times showed that the flexural strength could reach(131.73±9.43)MPa when the single-layer exposure time was 3.0 s,and there was no significant difference when the exposure time was further increased.The flexural results of different post-curing times showed that when the post-curing time reached 30 min,there was no significant relationship between the flexural strength value and the increase in post-curing time.Regarding the influence of different layer thicknesses on the flexural performance,the test results showed that when the layer thickness was 50 μm,the result was the best,and the difference was statistically significant(P<0.001).Conclusion·Based on viscosity and rheological tests,a DLP-printable crown and bridge resin slurry was successfully developed.The optimal printing parameters were determined through statistical analysis of flexural strength:exposure intensity of 20 mW/cm2,exposure time of 3.0 s,post-curing time of 30 min,and a layer thickness of 50 μm.

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

Objective·To fabricate a 3D-printed dental crown and bridge resin slurry using digital light processing(DLP)technology,investigate the influence of different printing parameters on its mechanical properties,determine the optimal printing parameters,and optimize the composition ratio of DLP-printed crown and bridge resin.Methods·Based on the viscosity characteristics of the mixture,the optimal ratio of urethane dimethacrylate(UDMA)to poly(propylene glycol)dimethacrylate(PPGDMA)was explored.After silanizing silicon dioxide(SiO2),it was mixed with UDMA,PPGDMA,and 2,4,6-trimethylbenzoyl bis(p-tolyl)phosphine oxide(TMO)to prepare DLP-printed dental crown and bridge resin slurries with different solid contents,and their rheological properties were tested.The Beer-Lambert equation was used to calculate the light penetration depth and critical exposure energy of the printing slurry.Based on these values,different exposure intensities,exposure times,post-curing times,and layer thicknesses were set respectively to carry out a series of printing experiments.By comparing and analyzing the flexural strength of the products under different printing parameters,the optimal printing parameter combination was screened out.Results·Viscosity tests showed that the optimal UDMA-to-PPGDMA ratio was 6∶4.The rheological behavior of printing slurries with different solid contents was tested,and the results showed that the DLP-printed dental crown and bridge resin with a solid content of 22%exhibited the best printing performance.According to the Beer-Lambert analysis,the light penetration depth Dp of the printing slurry was 119.79 μm,and the critical exposure energy Ec was 25.54 mJ/cm2.When the exposure intensity was 20 mW/cm2,the flexural strength reached a maximum of(132.39±8.92)MPa,and the difference was statistically significant(P<0.05).The flexural results of different exposure times showed that the flexural strength could reach(131.73±9.43)MPa when the single-layer exposure time was 3.0 s,and there was no significant difference when the exposure time was further increased.The flexural results of different post-curing times showed that when the post-curing time reached 30 min,there was no significant relationship between the flexural strength value and the increase in post-curing time.Regarding the influence of different layer thicknesses on the flexural performance,the test results showed that when the layer thickness was 50 μm,the result was the best,and the difference was statistically significant(P<0.001).Conclusion·Based on viscosity and rheological tests,a DLP-printable crown and bridge resin slurry was successfully developed.The optimal printing parameters were determined through statistical analysis of flexural strength:exposure intensity of 20 mW/cm2,exposure time of 3.0 s,post-curing time of 30 min,and a layer thickness of 50 μm.

Objective:To compare the cumulative live birth rate (CLBR) per oocyte retrieval cycle between gonadotropin-releasing hormone agonist (GnRH-a) long protocol and GnRH antagonist (GnRH-A) protocol in overweight and obese women undergoing in vitro fertilization/intracytoplasmic sperm injection (IVF/ICSI). Methods:A retrospective cohort study was conducted to analyze the clinical characteristics of overweight and obese patients who underwent IVF/ICSI at the Center of Reproductive Medicine, the First Affiliated Hospital of Nanjing Medical University between January 2013 and December 2019. A total of 3 707 cycles were executed in overweight and obese patients who fulfilled the prescribed inclusion criteria, comprising 1 555 GnRH-a long protocol cycles and 2 152 GnRH-A protocol cycles. To mitigate confounding factors, post hoc randomization and propensity score matching (PSM) at a 1∶1 ratio were applied to match female age, anti-Müllerian hormone levels, and antral follicle count. The primary outcome observation indicator was the CLBR of the oocyte retrieval cycle. Analysis of subgroups of the population was conducted by the women's body mass index, age, and polycystic ovarian syndrome (PCOS) status.Results:After PSM, a total of 2 496 cycles were included comprising 1 248 GnRH-a long protocol cycles and 1 248 GnRH-A protocol cycles. GnRH-a long protocol had a higher CLBR [71.88% (897/1 248)] than that in GnRH-A protocol [62.98% (786/1 248), P<0.001]. No statistically significant difference was observed in the interval from gonadotropin initiation to live birth delivery day between the GnRH-a long protocol and GnRH-A protocol ( P>0.05). Subgroup analysis revealed that after PSM, the CLBR of GnRH-a long protocol in the patients with a body mass index of 25.0-29.9 kg/m 2 [71.36% (856/1 195)] and ≥30.0 kg/m 2 [77.36% (41/53)] were higher than those of the GnRH-A protocol patients [63.30% (759/1 199), P<0.001; 55.10% (27/49), P=0.017]. The CLBR of GnRH-a long protocol in women aged 20-34 [73.32% (805/1 098)] and ≥35 years [61.33% (92/150)] were higher than those of the GnRH-A protocol patients [67.18% (696/1 036), P=0.002; 42.45% (90/212), P<0.001]; among patients without PCOS, the CLBR with the GnRH-a long protocol [71.55% (850/1 188)] was significantly higher than that with GnRH-A protocol [60.95% (654/1 073), P<0.001]. However, in overweight and obese patients with PCOS, there was no statistically significant difference in CLBR between the two protocols ( P>0.05). The incidence of moderate-severe ovarian hyperstimulation syndrome (OHSS) was significantly lower in the overweight and obese population using GnRH-A protocol [0.64% (8/1 248)] compared with GnRH-a long protocol [1.76% (22/1 248), P=0.016]. Conclusion:For overweight and obese patients, GnRH-a long protocol demonstrates higher CLBR compared with GnRH-A protocol, indicating superior efficacy. For those with PCOS, both protocols show comparable CLBR, while the incidence of severe OHSS is lower in the GnRH-A.

Objective:To evaluate the cumulative live birth rate (CLBR) and cost-effectiveness of fixed versus adjusted follicle-stimulation hormone (FSH) dosages in infertile women with different ovarian responses during their first assisted reproductive technology (ART) cycle.Methods:A retrospective real-world cohort study was conducted on 5 419 infertile women who underwent their first ART treatment at the Department of Reproductive Medicine of the First Affiliated Hospital of Nanjing Medical University between January 2013 and December 2017. All patients received an individualized starting dosage of gonadotropin. Based on whether FSH dosages were adjusted during controlled ovarian stimulation (COS), patients were divided into fixed-dosage group ( n=2 061) and adjusted-dosage group ( n=3 358). Clinical outcomes and FSH cost-effectiveness were compared between the two groups across different ovarian response groups, with CLBR as the primary outcome. Propensity score matching (PSM) and multivariable logistic regression were used to adjust for potential confounders. Results:FSH dosage adjustments were found in 62.0% (3 358/5 419) of cycles during COS. After PSM, baseline characteristics were comparable between the two groups (all P>0.05). After adjusting for confounders using multivariable logistic regression, FSH dosage adjustment was not significantly associated with CLBR ( OR=1.06, 95% CI: 0.94-1.20, P=0.332). Compared with the adjusted-dosage group, the fixed-dosage group showed no significant differences in CLBR in poor-, normal-, and high-responder groups (all P>0.05). The incidence of ovarian hyperstimulation syndrome (OHSS) did not differ significantly between the two groups ( P>0.05). In poor-, normal-, and high-responder groups, the total FSH dosages in the fixed-dose group [1 350 (375, 1 825) U, 1 200 (375, 1 500) U and 525 (375, 1 128) U, respectively] were significantly lower than those in the adjusted-dose group [1 875 (1 425, 2 294) U, P=0.001; 1 425 (450, 1 875) U, P<0.001; 600 (375, 1 425) U, P=0.020]. Similarly, average FSH costs in different ovarian response groups in the fixed-dosage group [4 725.0 (1 312.5, 6 387.5) yuan, 4 200.0 (1 312.5, 5 250.0) yuan and 1 837.5 (1 312.5, 3 947.3) yuan, respectively] were significantly lower than those in the adjusted-dosage group [6 562.5 (4 987.5, 8 028.1) yuan, P=0.001; 4 987.5 (1 575.0, 6 562.5) yuan, P<0.001; 2 100.0 (1 312.5, 4 987.5) yuan, P=0.020]. For normal-responders, the FSH cost per high-quality embryo in the fixed-dosage group [1 365.0 (875.0, 2 537.5) yuan] was significantly lower than that in the adjusted-dosage group [2 056.3 (1 268.8, 3 412.5) yuan, P<0.001]. Conclusion:FSH dosage adjustment during COS is not associated with CLBR or the incidence of OHSS. However, the fixed-dose group exhibited lower total FSH dosages and costs across different ovarian response populations. In the context of ART being covered by medical insurance, fixed FSH dosage may represent a more cost-effective ovarian stimulation protocol.

Objective:To compare the cumulative live birth rate (CLBR) per oocyte retrieval cycle between gonadotropin-releasing hormone agonist (GnRH-a) long protocol and GnRH antagonist (GnRH-A) protocol in overweight and obese women undergoing in vitro fertilization/intracytoplasmic sperm injection (IVF/ICSI). Methods:A retrospective cohort study was conducted to analyze the clinical characteristics of overweight and obese patients who underwent IVF/ICSI at the Center of Reproductive Medicine, the First Affiliated Hospital of Nanjing Medical University between January 2013 and December 2019. A total of 3 707 cycles were executed in overweight and obese patients who fulfilled the prescribed inclusion criteria, comprising 1 555 GnRH-a long protocol cycles and 2 152 GnRH-A protocol cycles. To mitigate confounding factors, post hoc randomization and propensity score matching (PSM) at a 1∶1 ratio were applied to match female age, anti-Müllerian hormone levels, and antral follicle count. The primary outcome observation indicator was the CLBR of the oocyte retrieval cycle. Analysis of subgroups of the population was conducted by the women's body mass index, age, and polycystic ovarian syndrome (PCOS) status.Results:After PSM, a total of 2 496 cycles were included comprising 1 248 GnRH-a long protocol cycles and 1 248 GnRH-A protocol cycles. GnRH-a long protocol had a higher CLBR [71.88% (897/1 248)] than that in GnRH-A protocol [62.98% (786/1 248), P<0.001]. No statistically significant difference was observed in the interval from gonadotropin initiation to live birth delivery day between the GnRH-a long protocol and GnRH-A protocol ( P>0.05). Subgroup analysis revealed that after PSM, the CLBR of GnRH-a long protocol in the patients with a body mass index of 25.0-29.9 kg/m 2 [71.36% (856/1 195)] and ≥30.0 kg/m 2 [77.36% (41/53)] were higher than those of the GnRH-A protocol patients [63.30% (759/1 199), P<0.001; 55.10% (27/49), P=0.017]. The CLBR of GnRH-a long protocol in women aged 20-34 [73.32% (805/1 098)] and ≥35 years [61.33% (92/150)] were higher than those of the GnRH-A protocol patients [67.18% (696/1 036), P=0.002; 42.45% (90/212), P<0.001]; among patients without PCOS, the CLBR with the GnRH-a long protocol [71.55% (850/1 188)] was significantly higher than that with GnRH-A protocol [60.95% (654/1 073), P<0.001]. However, in overweight and obese patients with PCOS, there was no statistically significant difference in CLBR between the two protocols ( P>0.05). The incidence of moderate-severe ovarian hyperstimulation syndrome (OHSS) was significantly lower in the overweight and obese population using GnRH-A protocol [0.64% (8/1 248)] compared with GnRH-a long protocol [1.76% (22/1 248), P=0.016]. Conclusion:For overweight and obese patients, GnRH-a long protocol demonstrates higher CLBR compared with GnRH-A protocol, indicating superior efficacy. For those with PCOS, both protocols show comparable CLBR, while the incidence of severe OHSS is lower in the GnRH-A.

Objective:To evaluate the cumulative live birth rate (CLBR) and cost-effectiveness of fixed versus adjusted follicle-stimulation hormone (FSH) dosages in infertile women with different ovarian responses during their first assisted reproductive technology (ART) cycle.Methods:A retrospective real-world cohort study was conducted on 5 419 infertile women who underwent their first ART treatment at the Department of Reproductive Medicine of the First Affiliated Hospital of Nanjing Medical University between January 2013 and December 2017. All patients received an individualized starting dosage of gonadotropin. Based on whether FSH dosages were adjusted during controlled ovarian stimulation (COS), patients were divided into fixed-dosage group ( n=2 061) and adjusted-dosage group ( n=3 358). Clinical outcomes and FSH cost-effectiveness were compared between the two groups across different ovarian response groups, with CLBR as the primary outcome. Propensity score matching (PSM) and multivariable logistic regression were used to adjust for potential confounders. Results:FSH dosage adjustments were found in 62.0% (3 358/5 419) of cycles during COS. After PSM, baseline characteristics were comparable between the two groups (all P>0.05). After adjusting for confounders using multivariable logistic regression, FSH dosage adjustment was not significantly associated with CLBR ( OR=1.06, 95% CI: 0.94-1.20, P=0.332). Compared with the adjusted-dosage group, the fixed-dosage group showed no significant differences in CLBR in poor-, normal-, and high-responder groups (all P>0.05). The incidence of ovarian hyperstimulation syndrome (OHSS) did not differ significantly between the two groups ( P>0.05). In poor-, normal-, and high-responder groups, the total FSH dosages in the fixed-dose group [1 350 (375, 1 825) U, 1 200 (375, 1 500) U and 525 (375, 1 128) U, respectively] were significantly lower than those in the adjusted-dose group [1 875 (1 425, 2 294) U, P=0.001; 1 425 (450, 1 875) U, P<0.001; 600 (375, 1 425) U, P=0.020]. Similarly, average FSH costs in different ovarian response groups in the fixed-dosage group [4 725.0 (1 312.5, 6 387.5) yuan, 4 200.0 (1 312.5, 5 250.0) yuan and 1 837.5 (1 312.5, 3 947.3) yuan, respectively] were significantly lower than those in the adjusted-dosage group [6 562.5 (4 987.5, 8 028.1) yuan, P=0.001; 4 987.5 (1 575.0, 6 562.5) yuan, P<0.001; 2 100.0 (1 312.5, 4 987.5) yuan, P=0.020]. For normal-responders, the FSH cost per high-quality embryo in the fixed-dosage group [1 365.0 (875.0, 2 537.5) yuan] was significantly lower than that in the adjusted-dosage group [2 056.3 (1 268.8, 3 412.5) yuan, P<0.001]. Conclusion:FSH dosage adjustment during COS is not associated with CLBR or the incidence of OHSS. However, the fixed-dose group exhibited lower total FSH dosages and costs across different ovarian response populations. In the context of ART being covered by medical insurance, fixed FSH dosage may represent a more cost-effective ovarian stimulation protocol.

Objective To analyze the modeling elements and subjects of the animal model of skin photoaging, and to provide a reference for the preparation and improvement of the model and a basis for the scientific evaluation of the subject.Methods By searching and collecting relevant literature on the preparation of animal models of skin photoaging from 2010 to 2022 in the China National Knowledge Infrastructure, Wanfang Database, and PubMed database, the model animal species, gender, modeling method, modeling cycle, radiation source and its distance from the modeling site, cumulative radiation volume, detection indicators, and subjects (drugs or treatments) recorded in the literature were collated and summarized, and a database was established for statistical analysis.Results 257 articles that met the inclusion criteria were selected. Among them, the most common animal model was SKH-1 hairless mice, followed by SD rats and KM mice; the gender of animals was mainly female, medium-wave ultraviolet B (UVB) was often used as the radiation source, the distance between the radiation source and the modelling site was mostly 30 cm, and the modelling period was usually 40-60 days. The cumulative dose of long-wave ultraviolet A (UVA) was between 100-150 J/cm², and the cumulative dose of UVB was between 5-10 J/cm². The tests used after model establishment were skin histopathological examination, skin tissue homogenization, fibre staining, immunoblotting, etc. Subjects included Chinese herbal medicines, Chinese herbal extracts, Chinese patent medicines, Chinese herbal compound medicines, chemical drugs, biological agents and other treatments, while the animal model of skin photoaging was also used for clinical efficacy studies of external Chinese medicine, physiotherapy and positive control drugs.Conclusion In skin photoaging animal experiments, female SKH-1 hairless mice are often used, and UVB is used as the radiation source. The modeling period is usually 40-60 days, and the minimum erythema dose (MED) is incremented week by week. The cumulative UVB irradiation dose ranges from 0 to 10 J/cm², which has the advantages of high success rate, good reproducibility and high similarity with clinical disease.

Objective:To explore the effect of clomiphene citrate (CC) with different dosages on the endometrial factor, number of oocytes retrieved, pregnancy outcomes and other factors in diminished ovarian reserve (DOR) patients with minimal stimulation/natural protocol.Methods:This was a retrospective cohort study. The patients who underwent minimal stimulation protocol of in vitro fertilization/intracytoplasmic sperm injection and embryo transfer (IVF/ICSI-ET) were divided into 4 groups. Group A: the patients had CC 50 mg/d from the third day of menstruation to the trigger day (1 457 cycles); group B: the patients had 50 mg/d from the third day of menstruation for 3 d (1 533 cycles); group C: the patients had CC 25 mg/d from the third day of menstruation to the trigger day (345 cycles); group D: the patients had CC 25 mg/d for 3 d (319 cycles). The general data, clinical results, pregnancy and delivery outcomes were compared between group A and group B, as well as group C and group D. Results:In the treatment of IVF/ICSI, the dosage of gonadotropin (Gn) used, number of dominant follicles, estradiol level, luteinizing hormone level, progesterone level, number of oocytes retrieved, rate of oocytes retrieved, number of fertilizations, number of transplantable embryos and whole embryo freezing rate in patients of group A were significantly higher than those in group B (all P<0.05). The endometrial thickness [7.10 (5.40,8.65) mm] and the ratio of endometrial type (A/A-B) on trigger day [70.70% (888/1 256)] of group B were significantly better than those of group A [6.00 (4.70,8.00) mm, P<0.001; 63.62% (649/1 020), P<0.001], and the fresh embryo transfer rate of group B was significantly higher than that of group A [20.00% (259/1 295) vs. 42.94% (584/1 360), P<0.001]. There were no statistical differences in the number of high-quality embryos and the rate of no embryo transfer between the two groups (both P>0.05). In group C and group D, the Gn used dosage, the number of dominant follicles, the estradiol level on trigger day, number of oocytes retrieved, embryos/cycles were significantly increased (all P<0.05), the endometrial thickness on trigger day of group D [7.00 (5.40, 8.60) mm] was significantly higher than that of group C [6.10 (5.00,7.93) mm, P<0.001], but there was no statistical difference of the ratio of endometrial type (A/A-B) between the two groups ( P=0.739). In addition, the luteinizing hormone and progesterone values on the trigger day in group C were significantly higher than those in group D ( P=0.014, P=0.005), but there were no significant differences in pre-ovulation rate and all embryos frozen rate between the two groups (all P<0.05), and the rate of fresh embryo transfer in group C [26.04% (75/288)] was significantly lower than that in group D [38.80% (97/250), P<0.001]. Finally, there were no significant differences in cumulative clinical pregnancy rate and fresh/frozen embryo transfer outcome between group A and group B as well as group C and group D (all P>0.05). Conclusion:The use of low-dose and short-time CC in minimal stimulation protocol does not change the final pregnancy outcome, while saving patients' economic and time costs, so it could be an appropriate project for DOR patients.