Objective To conduct a scoping review of research on the relationship between 24-hour movement behaviours and cognitive function in the elderly,so as to provide references for future research.Methods Totally 8 Chinese and English databases were systematically searched.The search period spanned from the establishment of databases until November 30,2024.According to the scoping review framework,2 researchers independently screened the studies,extracted the data of the included studies,and collaborated on the final analysis.Results A total of 12 papers were included,and the distribution of 24-hour movement behaviors in the elderly was as follows:3.0-5.4 h/d for light physical activity,0.6-1.5 h/d for moderate vigorous physical activity,8.9-12.3 h/d for sedentary behaviour and 6.7-8.4 h/d for sleep.Measures included objective,subjective and subject-objective measures.There are complex interactions among physical activity,sedentary behavior,sleep and cognitive function,which jointly affect cognitive function in the elderly.Conclusion Despite current differences in the measurement of 24-hour movement behaviours,the decreased physical activity,the increased sedentary time,and insufficient or excessive sleep are common problems among the elderly.By increasing physical activity,reducing sedentary behavior and ensuring adequate sleep,the overall cognitive function,executive function of the elderly can be improved.In the future,we should pay attention to the time allocation of 24-hour movement behaviours of the elderly,develop accurate and standardized measurement methods,and promote research in this field.

ObjectiveTo evaluate the effectiveness of stone needle thermocompression and massage compared to flurbiprofen gel patch in relieving chronic musculoskeletal pain in the shoulder and back， and to explore the potential mediating mechanism through muscle elasticity. MethodsA total of 120 patients with chronic musculoskeletal pain in the shoulder and back were randomly assigned to either stone needle group or flurbiprofen group， with 60 patients in each. The stone needle group received stone needle thermocompression and massage for 30 minutes， three times per week； the flurbiprofen group received flurbiprofen gel patch twice daily. Both groups were treated for 2 weeks. Pain improvement， as the primary outcome， was assessed using the Global Pain Scale （GPS） at baseline， after 2 weeks of treatment， and again 2 weeks post-treatment. To explore potential mechanisms， a mediator analysis was conducted by measuring changes in superficial and deep muscle elasticity using musculoskeletal ultrasound at baseline and after the 2-week treatment period. ResultsThe stone needle group showed significantly greater pain relief than the flurbiprofen group 2 weeks post-treatment. After adjusting for confounders related to pain duration， the between-group mean difference was -8.8 ［95% CI （-18.2， -0.7）， P＜0.05］. Part of the therapeutic effect was mediated by changes in deep muscle elasticity， with a mediation effect size of -1.5 ［95% CI （-2.0， -0.9）， P = 0.024］， accounting for 17.9% of the total effect. ConclusionStone needle thermocompression and massage can effectively relieve chronic musculoskeletal pain in the shoulder and back， partly through a mediating effect of improved deep muscle elasticity.

Objective To conduct a scoping review of research on the relationship between 24-hour movement behaviours and cognitive function in the elderly,so as to provide references for future research.Methods Totally 8 Chinese and English databases were systematically searched.The search period spanned from the establishment of databases until November 30,2024.According to the scoping review framework,2 researchers independently screened the studies,extracted the data of the included studies,and collaborated on the final analysis.Results A total of 12 papers were included,and the distribution of 24-hour movement behaviors in the elderly was as follows:3.0-5.4 h/d for light physical activity,0.6-1.5 h/d for moderate vigorous physical activity,8.9-12.3 h/d for sedentary behaviour and 6.7-8.4 h/d for sleep.Measures included objective,subjective and subject-objective measures.There are complex interactions among physical activity,sedentary behavior,sleep and cognitive function,which jointly affect cognitive function in the elderly.Conclusion Despite current differences in the measurement of 24-hour movement behaviours,the decreased physical activity,the increased sedentary time,and insufficient or excessive sleep are common problems among the elderly.By increasing physical activity,reducing sedentary behavior and ensuring adequate sleep,the overall cognitive function,executive function of the elderly can be improved.In the future,we should pay attention to the time allocation of 24-hour movement behaviours of the elderly,develop accurate and standardized measurement methods,and promote research in this field.

Objective To analyze the potential distribution and quality zoning of Gentiana farreri Balf.f.;To provide a theoretical basis for the conservation,sustainable utilization,and domestication of this Tibetan medicine resource.Methods The MaxEnt model and geographic information system software ArcGIS 10.2 were used to conduct ecological suitability zoning of Gentiana farreri Balf.f.in China through searching online specimen libraries and field investigations.SPSS25.0 software was used to construct a relationship model between indicator components and ecological factors,combined with ArcGIS software spatial analysis technology,to form a quality zoning of Gentiana farreri Balf.f.medicinal material.Results The primary environmental factors influencing the ecological suitability of Gentiana farreri Balf.f.were altitude,precipitation in May,April and December,and the mean monthly diurnal temperature range.The most suitable growth areas for Gentiana farreri Balf.f.were predominantly found at the junction of Gansu,Sichuan and Qinghai provinces,certain parts of Tibet,and selected regions of Sichuan.The southern part of Tibet and the southwestern part of Sichuan were identified as having higher comprehensive quality of Gentiana farreri Balf.f.medicinal materials.Conclusion The findings of this study can serve as a reference for the production planning and quality assessment of Gentiana farreri Balf.f.

Lung cancer is one of the most common malignancies with the highest incidence rate and mortality rate worldwide, and non-small cell lung cancer (NSCLC) accounts for about 85%. Only 5% NSCLC patients are anaplastic lymphoma kinase (ALK) rearrangement positive NSCLC, but the prognosis of these patients is poor, and treatment is urgent. Ensartinib (X-396), a next-generation ALK tyrosine kinase inhibitor (ALK-TKI), has shown greater potency on inhibiting ALK activity and controlling brain metastases than crizotinib, which is indicated for the treatment of crizotinib-resistant, ALK-positive NSCLC patients. Several phase I to III clinical trials included both healthy volunteers and NSCLC patients have been conducted both in China and abroad. In this review, we briefly summarized the results of these trials, and preliminary efficacy, safety, pharmacology and pharmacokinetics/pharmacodynamics of ensartinib were discussed.

Hepatolithiasis is a common and persistent disease in hepatobiliary surgery, which is one of the most important leading causes of death in patients with benign biliary tract diseases. Traditional of diagnosis and treatment options of hepatolithiasis have limitations, recently the rising of three-dimensional visualization technology provides doctors with fresh thinking and approaches. Three-dimensional visualization technology can accurately evaluate the anatomical structure and pathological condition of the liver, at the same time it plays an important role in guiding hepatectomy, choledochoscopic lithotripsy and biliary drainage. Three-dimensional printing and intraoperative navigation, which based on three-dimensional visualization technology, also has good application prospects. This paper summarized the application of three-dimensional visualization technology for the diagnosis and treatment of hepatolithiasis in order to help the future research.

BACKGROUND: It has been found that the distribution and diffusion degree of bone cement are the main factors influencing the clinical effect of percutaneous vertebroplasty. OBJECTIVE: To explore the feasibility of analyzing bone cement distribution form and diffusion degree based on Mimics software, and to evaluate the relationship of clinical efficacy with bone cement distribution form and diffusion degree. METHODS: A total of 170 cases of osteoporotic vertebral compression fracture admitted to Zigong No. 4 People's Hospital from January 2017 to March 2018 were included, including 41 cases of males and 129 cases of females aged 60-97 years. All of them were treated with percutaneous vertebroplasty. X-ray and CT examination were done at postoperative 2 days, and the bone cement distribution was classified into five types based on the distribution of bone cement in X-ray images, including type Ⅰ (most cement continuously and evenly distributed in the vertebral body), type Ⅱ (most cement distributed in the central vertebral bodies), type Ⅲ (most cement distributed on both sides of vertebral body), type Ⅳ (most cement distribution at the side of the vertebral bodies and the central), type Ⅴ (most cement distribution at the side of the vertebral body). Mimics project files were created based on CT image data to calculate bone cement volume and diffusion volume. After 6 months of follow-up, visual analogue scale score, Oswestry disability index and Cobb angle were compared among groups to analyze the relationship between bone cement distribution, bone cement diffusion volume, bone cement diffusion volume ratio and clinical efficacy. RESULTS AND CONCLUSION: (1) The visual analogue scale score and Oswestry disability index of the five types of bone cements were significantly improved at 2 days and 6 months after surgery compared with preoperative data (P < 0.05), the Cobb angle of the type Ⅰ group was significantly improved compared with preoperative data (P < 0.05), and the Cobb angles of the type Ⅱ-Ⅴ groups showed no difference from the preoperative data (P> 0.05). (2) The diffusion volume of bone cement was (6.69±1.19) mL, and the diffusion volume ratio of bone cement was (20.93±3.13) ％. There was no correlation between the volume of bone cement injection and the visual analogue scale score, Oswestry disability index and Cobb angle at 2 days and 6 months after surgery. There was a negative correlation between the bone cement dispersion volume and the visual analogue scale score at 6 months after surgery, and the Oswestry disability index score at 2 days and 6 months after surgery (P < 0.05), but the correlation was weak. The diffusion volume ratio of bone cement was negatively correlated with the visual analogue scale score and Oswestry disability index score at 2 days and 6 months after surgery (P < 0.05), showing a strong correlation. These findings show that, based on the three-dimensional reconstruction function of Mimics software, the diffusion volume and diffusion volume ratio of bone cement can be accurately calculated. The bone cement evenly distributed can alleviate the local kyphosis. The diffusion volume ratio of bone cement is positively correlated with clinical efficacy, which is more valuable than the volume of bone cement.

Objectives To evaluate the 3D printed navigation template used to assist axis pedicle lag-screw placement in the treatment of atypical Hangman's fracture(AHF).Methods From May 2015 to January 2017,12 patients with AHF were treated at Department of Orthopedics,The Fourth Peopled Hospital of Zigong.In their operation,the axis pedicle lag-screw placement was assisted by a 3D printed navigation template.They were 8 men and 4 women,aged from 27 to 53 years(average,45.6 years).There were 7 cases of type Ⅰ,4 cases type Ⅱ and one case of type HA according to the Levine-Edwards classification.There were 2 cases of grade D and 12 cases of grade E according to the assessment of America Spinal Injury Association(ASIA).Their preoperative and postoperative neck pain was evaluated by visual analogue scale(VAS);their preoperative and postoperative ranges of cervical motion were recorded and compared.To evaluate the postoperative safety of screws,the insertion point,position within the pedicle,axial angle and sagittal angle of the screws and maximum fracture displacement were compared between actual operation and simulative operation.Results A total of 12 guide plates were designed and printed;a total of 24 lag-screws were placed.All patients underwent surgery uneventfully.They were followed up for 12 to 20 months,with an average of 14.7 months.Two patients with ASIA grade D recovered to ASIA grade E at the last follow-up.All patients showed a significant improvement in neck pain.Their VAS score at 5 days after surgery(5.86±2.02) was significantly lower than their preoperative score(8.29±1.88)(P<0.05) and their VAS score at the last follow-up(1.73±0.87) was also significantly lower than that at 5 days after surgery(P<0.05).Their range of cervical motion at 6 months after surgery was significantly larger than that at 3 months after surgery(P<0.05);their range of cervical motion returned to normal roughly at the last follow-up,showing no significant difference from that at 6 months(P>0.05).Their postoperative X-ray and CT images showed that the dislocation was all corrected.The last follow-up showed no obvious vertebral instability,screw breakage or loosening.Postoperative CT showed that the 24 screws had been located completely in the pedicle(grade 0),indicating that the screw placement was 100% accurate.The postoperative deviation at insertion point(0.70±0.78 mm),deviation within the pedicle(1.3±0.82 mm),axial angle(8.26°±0.88°) and sagittal angle(22.62°±0.86°) of the screws showed no significant differences from the preoperative simulative data(P>0.05).There was a significant difference in the maximum fracture displacement between the preoperative data(3.94±0.38 mm) and the postoperative data(2.21±0.39 mm)(P<0.05).Conclusion The 3D printed navigation template can be used to better assist axis pedicle lag-screw placement in the treatment of AHF,because it ensures safe screw placement,leading to good reduction and fixation and precise match with the preoperative plan.

Objective To explore the clinical efficacy of 3D printing technique in assisting sacroiliac screwing in combination with front ring nail-rod system for treatment of unstable pelvic fractures.Methods From July 2015 to June 2017,3D printing technique was used to assist the sacroiliac screwing in combination with front ring nail-rod system for 16 patients with unstable pelvic fracture at Orthopaedic Center,The Fourth People's Hospital of Zigong.They were 9 males and 7 females,aged from 19 to 60 years (average,39.8 years).By the Tile classification,5 cases were type B1,6 type B2,3 type B3 and 2 type C.Their operation duration,bleeding,fluoroscopy frequency,incision length,postoperative fracture reduction,success rate of sacroiliac screwing,accuracy of sacroiliac screwing,perioperative complications,weight-bearing exercise time,fracture healing time and the Majeed scores at the last follow-up were documented.Results All the 3D models and navigation templates were successfully designed and printed.Surgery succeeded in all the patients.Follow-ups ranged from 6 to 18 months,averaging 13.3 months.The bleeding ranged from 100 to 250 mL,averaging 162.4 mL;the operation duration ranged from 60 to 120 min,averaging 73.2 min;the intra-operative fluoroscopy frequency ranged from 13 to 31 times,averaging 17.4 times;the incision length ranged from 16 to 32 cm,averaging 21.1 cm.All the incisions healed by the first intention and all the fractures obtained osseous union after 90 to 120 d (average,102.3 d).No significant complications like neurovascular injury or pulmonary embolism happened.The weight-bearing exercise time ranged from 25 to 40 d,averaging 31.5 d.According to the Matta imaging scores,the reduction was rated as excellent in 12 cases and good in 4.Altogether 28 screws were inserted with a success rate of 100％.Compared with the preoperative simulated screwing,the actual screwing angle deviated postoperatively by 0.12° ± 0.32°,the X axis by 0.36 ± 1.24 mm,the Y axis by 0.36 ± 1.24 mm and the Z axis by 0.22 ± 1.26 mm,showing no statistically significant difference between the actual 3D deviations and the test value of 0 (P ＞ 0.05).Conclusion In the treatment of unstable pelvic fractures,3D printing technique can be used in preoperative preparation of the connecting rod in the front ring nail-rod system to assist the sacroiliac screwing,significantly shortening the operation duration,reducing bleeding,ensuring safe and accurate screwing,and facilitating functional recovery.

Objective To investigate CT features of solitary fibrous tumor of the mediastinum(SFTM),and to analyze the causes of misdiagnosis of this disease.Methods CT features of 5 patients of SFTM confirmed operatively and pathologically were retrospec-tively analyzed.All patients underwent before operation but were misdiagnosed.Results 3 cases were located in right mediastinum with oval-shap,well-defined margin,and “pleural tail sign”,2 cases were located in right thoracis cavity with unwell-defined margin, and in the adjacent lung were oppressed.In all 5 patients,the mean median of tumors was 1 1.5 cm(8.6-1 5 cm),non-homogeneous density of tumors were seen on plain CT scans,and obvious non-homogeneous enhancement with“geographic pattern”on contrast-en-hanced CT.Conclusion CT can clearly reveal the size and the appearance of SFTM,adjacent architectures,the final diagnosis de-pends on histopathological and immunohistochemical findings of the tumors.To un-know is the main caused of misdiagnosis of medi-astinal SFT.