Objective:To study the effect of preoperative pancreatic duct stent placement in enucleation (EN) of pancreatic tumor adjacent to the main pancreatic duct (MPD).Methods:Clinical data of 56 patients with benign or borderline pancreatic tumor adjacent to the MPD undergoing EN in the Department of Hepatobiliary Surgery of the Second Hospital of Hebei Medical University from January 2022 to September 2024 were retrospectively analyzed, including 25 males and 31 females, aged (32.0±5.5) years. Among the patients, 35 (62.5%) were solid pseudopapillary neoplasm, 15 (26.8%) were neuroendocrine tumor, and 6 (10.7%) were serous cystic tumor. According to whether the pancreatic duct stent was placed through encoscopic retrograde cholangiopancreatography preoperatively, patients were divided into the stent group ( n=20, observation group) and no-stent group ( n=36, control group). The operation time, intraoperative pancreatic duct injury, tumor enucleation time and blood loss, grade B/C pancreatic fistula and postoperative hospital stay were compared between the two groups. Results:All patients underwent EN successfully. The operation time in the observation group was shorter than that in the control group [150.0 (143.5, 159.0) vs 158.0 (150.0, 180.0) min, Z=-2.08, P=0.031], and the rate of intraoperative MPD injury in the observation group was lower than that in the control group [10.0% (2/20) vs 38.9% (14/36), χ2=5.26, P=0.022]. The tumor enucleation time and blood loss were comparable between the two groups (both P>0.05). The rate of postoperative grade B/C pancreatic fistula in the observation group was lower than that in the control group [15.0% (3/20) vs 41.7% (15/36), χ2=4.19, P=0.041], and the postoperative hospital stay was also shorter in the observation group [(7.9±1.6) vs (9.3±2.1) d, t=-2.57, P=0.014]. Conclusion:Under the premise of matured endoscopic operation, preoperative pancreatic duct stent placement through ERCP in the EN of pancreatic tumor adjacent to the MPD can protect the MPD during operation, reduce the occurrence of postoperative grade B/C pancreatic fistula, and shorten the postoperative hospital stay.

Objective:To study the effect of preoperative pancreatic duct stent placement in enucleation (EN) of pancreatic tumor adjacent to the main pancreatic duct (MPD).Methods:Clinical data of 56 patients with benign or borderline pancreatic tumor adjacent to the MPD undergoing EN in the Department of Hepatobiliary Surgery of the Second Hospital of Hebei Medical University from January 2022 to September 2024 were retrospectively analyzed, including 25 males and 31 females, aged (32.0±5.5) years. Among the patients, 35 (62.5%) were solid pseudopapillary neoplasm, 15 (26.8%) were neuroendocrine tumor, and 6 (10.7%) were serous cystic tumor. According to whether the pancreatic duct stent was placed through encoscopic retrograde cholangiopancreatography preoperatively, patients were divided into the stent group ( n=20, observation group) and no-stent group ( n=36, control group). The operation time, intraoperative pancreatic duct injury, tumor enucleation time and blood loss, grade B/C pancreatic fistula and postoperative hospital stay were compared between the two groups. Results:All patients underwent EN successfully. The operation time in the observation group was shorter than that in the control group [150.0 (143.5, 159.0) vs 158.0 (150.0, 180.0) min, Z=-2.08, P=0.031], and the rate of intraoperative MPD injury in the observation group was lower than that in the control group [10.0% (2/20) vs 38.9% (14/36), χ2=5.26, P=0.022]. The tumor enucleation time and blood loss were comparable between the two groups (both P>0.05). The rate of postoperative grade B/C pancreatic fistula in the observation group was lower than that in the control group [15.0% (3/20) vs 41.7% (15/36), χ2=4.19, P=0.041], and the postoperative hospital stay was also shorter in the observation group [(7.9±1.6) vs (9.3±2.1) d, t=-2.57, P=0.014]. Conclusion:Under the premise of matured endoscopic operation, preoperative pancreatic duct stent placement through ERCP in the EN of pancreatic tumor adjacent to the MPD can protect the MPD during operation, reduce the occurrence of postoperative grade B/C pancreatic fistula, and shorten the postoperative hospital stay.

Digital intraoral scanning is a hot topic in the field of oral digital technology.In recent years,digital intra-oral scanning has gradually become the mainstream technology in orthodontics,prosthodontics,and implant dentistry.The precision of digital intraoral scanning and the accuracy and stitching of data collection are the keys to the success of the impression.However,the operators are less familiar with the intraoral scanning characteristics,imaging process-ing,operator scanning method,oral tissue specificity of the scanned object,and restoration design.Thus far,no unified standard and consensus on digital intraoral scanning technology has been achieved at home or abroad.To deal with the problems encountered in oral scanning and improve the quality of digital scanning,we collected common expert opin-ions and sought to expound the causes of scanning errors and countermeasures by summarizing the existing evidence.We also describe the scanning strategies under different oral impression requirements.The expert consensus is that due to various factors affecting the accuracy of digital intraoral scanning and the reproducibility of scanned images,adopting the correct scanning trajectory can shorten clinical operation time and improve scanning accuracy.The scanning trajec-tories mainly include the E-shaped,segmented,and S-shaped methods.When performing fixed denture restoration,it is recommended to first scan the abutment and adjacent teeth.When performing fixed denture restoration,it is recommend-ed to scan the abutment and adjacent teeth first.Then the cavity in the abutment area is excavated.Lastly,the cavity gap was scanned after completing the abutment preparation.This method not only meets clinical needs but also achieves the most reliable accuracy.When performing full denture restoration in edentulous jaws,setting markers on the mucosal tissue at the bottom of the alveolar ridge,simultaneously capturing images of the vestibular area,using different types of scanning paths such as Z-shaped,S-shaped,buccal-palatal and palatal-buccal pathways,segmented scanning of dental arches,and other strategies can reduce scanning errors and improve image stitching and overlap.For implant restora-tion,when a single crown restoration is supported by implants and a small span upper structure restoration,it is recom-mended to first pre-scan the required dental arch.Then the cavity in the abutment area is excavated.Lastly,scanning the cavity gap after installing the implant scanning rod.When repairing a bone level implant crown,an improved indi-rect scanning method can be used.The scanning process includes three steps:First,the temporary restoration,adjacent teeth,and gingival tissue in the mouth are scanned;second,the entire dental arch is scanned after installing a standard scanning rod on the implant;and third,the temporary restoration outside the mouth is scanned to obtain the three-di-mensional shape of the gingival contour of the implant neck,thereby increasing the stability of soft tissue scanning around the implant and improving scanning restoration.For dental implant fixed bridge repair with missing teeth,the mobility of the mucosa increases the difficulty of scanning,making it difficult for scanners to distinguish scanning rods of the same shape and size,which can easily cause image stacking errors.Higher accuracy of digital implant impres-sions can be achieved by changing the geometric shape of the scanning rods to change the optical curvature radius.The consensus confirms that as the range of scanned dental arches and the number of data concatenations increases,the scanning accuracy decreases accordingly,especially when performing full mouth implant restoration impressions.The difficulty of image stitching processing can easily be increased by the presence of unstable and uneven mucosal mor-phology inside the mouth and the lack of relatively obvious and fixed reference objects,which results in insufficient ac-curacy.When designing restorations of this type,it is advisable to carefully choose digital intraoral scanning methods to obtain model data.It is not recommended to use digital impressions when there are more than five missing teeth.

The impact of prenatal exposure to a mixture of heavy metals on birth weight in newborns has been a topic of ongoing interest. In this study, 258 mothers and infants from the New Hampshire Birth Cohort Study (NHBCS) were selected as the study subjects, and the concentrations of seven heavy metals in the placenta, including Aluminum (Al), Cobalt (Co), Chromium (Cr), Nickel (Ni), Plumbum (Pb), Selenium (Se) and Arsenic (As) were collected. And the birth weight of newborns, the relevant covariates of mothers and newborns were collected. Three analytical methods, Weighted Quantile Sum (WQS) regression, Quantile g-computation (QGC) and Bayesian kernel machine regression (BKMR) were employed. After adjusting for maternal gestational age, pre-pregnancy BMI, smoking status, education level, parity, gestational age and newborn gender, the combined three methods showed that the total effect of mixed exposure of seven heavy metals on birth weight was negative. Specifically, the WQS analysis revealed that Se had the greatest impact on birth weight, followed by Al. The QGC results showed that the heavy metal associated with the reduction of birth weight was mainly Se and Al in female and male infants, respectively. The BKMR analysis demonstrated a negative combined effect of the seven heavy metals on birth weight in both male and female infants, with Se having the highest posterior inclusion probabilities (PIPs) for female infants (0.45), and Al having the highest PIPs for male infants (0.64) after stratification by gender. In summary, mixed exposure to heavy metals during pregnancy was associated with a decrease in newborn birth weight. Furthermore, there are gender effects with Se and Al associated with decreased birth weight in female and male infants, respectively. These findings provide a theoretical basis for the development of public health policies aimed at preventing adverse pregnancy outcomes and improving the health of newborns.

The impact of prenatal exposure to a mixture of heavy metals on birth weight in newborns has been a topic of ongoing interest. In this study, 258 mothers and infants from the New Hampshire Birth Cohort Study (NHBCS) were selected as the study subjects, and the concentrations of seven heavy metals in the placenta, including Aluminum (Al), Cobalt (Co), Chromium (Cr), Nickel (Ni), Plumbum (Pb), Selenium (Se) and Arsenic (As) were collected. And the birth weight of newborns, the relevant covariates of mothers and newborns were collected. Three analytical methods, Weighted Quantile Sum (WQS) regression, Quantile g-computation (QGC) and Bayesian kernel machine regression (BKMR) were employed. After adjusting for maternal gestational age, pre-pregnancy BMI, smoking status, education level, parity, gestational age and newborn gender, the combined three methods showed that the total effect of mixed exposure of seven heavy metals on birth weight was negative. Specifically, the WQS analysis revealed that Se had the greatest impact on birth weight, followed by Al. The QGC results showed that the heavy metal associated with the reduction of birth weight was mainly Se and Al in female and male infants, respectively. The BKMR analysis demonstrated a negative combined effect of the seven heavy metals on birth weight in both male and female infants, with Se having the highest posterior inclusion probabilities (PIPs) for female infants (0.45), and Al having the highest PIPs for male infants (0.64) after stratification by gender. In summary, mixed exposure to heavy metals during pregnancy was associated with a decrease in newborn birth weight. Furthermore, there are gender effects with Se and Al associated with decreased birth weight in female and male infants, respectively. These findings provide a theoretical basis for the development of public health policies aimed at preventing adverse pregnancy outcomes and improving the health of newborns.

To explore the technical process and the therapeutic effect of using sequential surgical guide with independent intellectual property rights assisting immediate implantation and restoration of the full arch, with the support from the periodontal splint for mobile supporting teeth, patients with severe periodontitis who planned to undergo immediate full arch implantation were recruited from August 2019 to December 2020 at the Department of Prosthodontics, Department of Periodontology, Department of Implantology and First Clinical Division, Peking University School and Hospital of Stomatology. Through the procedure of collecting preoperative maxillofacial data, making systematic diagnostic design, making periodontal splints fixation, producing surgical guide, and carrying out guided surgery for full arch immediate implantation, eight cases were included. By registering the postoperative cone-beam CT (CBCT) with the preoperative data, the difference between the actual three-dimensional position of the implants and the virtual design was observed, and the accuracy of the implant placement position guided by the sequential guide was statistically analyzed using SPSS 25.0 software. Analysis indicators include coronal and apical global displacement, coronal horizontal and vertical displacement, apical horizontal and vertical displacement, and angular deviation. Results revealed that the 8 patients [2 males and 6 females, aged (49.0±9.3) years (38-65 years)] of recruited cases included 7 cases of maxilla and 1 cases of mandible. A total of 48 implants, of which 44 implants were placed upright and 4 were placed tilted, 16 implants in the anterior region and 32 implants in the posterior region. No guide plate fracture or damage to important anatomical structures were reported. The overall displacement at the coronal point [(0.83±0.48) mm] and the global displacement at the apical point [(1.36±0.57) mm] were within the clinically acceptable safety range, and the horizontal displacement and vertical displacement at the coronal point, horizontal displacement and vertical displacement at the apical point, and the angle deviation of implants axial have no statistic significant difference in the anterior and posterior region ( P>0.05). Periodontal splints combined with sequential surgical guides to assist patients with severe periodontitis for immediate full arch implantation and immediate restoration can expand the indications of guide assisted implant surgery. It meets the safety requirements in clinical applications.

Objective To investigate the clinical and radiologic features of posterior reversible encephalopathy syndrome (PRES) associated with preeclampsia-eclampsia.Methods Twenty-one cases of PRES associated with preeclampsia-eclampsia were retrospectively studied on some aspects of clinical and radiologic features.Results The most common clinical presentations were seizures( 18 cases ),headache (16 cases),altered mentation (15 cases) and vision change (12 cases). Vasogenic edema lesions distributed in the parietal or occipital lobe (20 cases),the frontal lobes (14 cases),temporal lobes ( 11 cases), and basal ganglia (11 cases). The splenium involvement occurred in 4 cases,cerebellar hemispheres and brain stem involvement was prcscnted in 3 cases and 1 case separately. Three major patterns of PRES included dominant parietal-occipital (7 cases),the holohemispheric watershed (7 cases),and superior frontal sulcal (6 cases).Partial and asymmetric expression of PRES only occurred in 1 case.Conclusions The clinical features of PRES associated with preeclampsia-eclampsia are typical.Except the parietal or occipital lobe,involvement of the frontal lobe,temporal lobe and basal ganglia is common,followed by the occasional presence of the splenium,cerebellar hemispheres and brain stem.Three primary PRES patterns are noted,occasional with partial and asymmetric expression of PRES. Awareness of these typical and variable characteristics is important to recognize the PRES ncurotoxicity morc accurately when PRES present.

The ability to pattern multiple cells through precise surface engineering of cell culture substrates has promoted the development of cellular bioassays, such as differentiation, interaction and molecular signaling pathways. There are several well developed ways to pattern cells. This report describes a method for patterning multiple types of cells based on microfluidics and self-assembled monolayers. We developed two types of micro-dam structures by soft-lithography to locate cells precisely and modified the substrate by a kind of self-assembled monolayer with property of electrochemical desorption to confine cells in specific areas. Finally we could pattern an array of two different types of cells closely and precisely. Cells were confined in specific areas but still shared the same microenvironment, so they could interact through soluble molecules. The substrate was transparent and open, so we could easily apply several instruments for research. With these merits, this cell chip is appropriate for investigating the interaction between different types of cells.
Cell Adhesion ; physiology ; Cell Line, Tumor ; Cell Proliferation ; Cells ; cytology ; Electrochemistry ; methods ; Endothelial Cells ; cytology ; Humans ; Liver Neoplasms ; pathology ; Microfluidics ; methods ; Substrate Specificity ; Tissue Engineering ; methods ; Umbilical Veins ; cytology

We developed a novel microfluidic cell chip, which enabled drug delivery, fluid control and cell co-culture. The device consisted of an array of 6x6 cell culture chambers, a drug gradient generator and fluidic control valves. Micro-dam structures of the chambers were able to trap cells while loading and drug gradient network generated drug gradient of 6 different concentrations. Also we applied hydraulic valves to control the microfluid and simulate the microenvironment of cells. We had investigated the viability of co-culturing cells in the chip and the ability for drug screening. This microfluidic cell chip has the potential in cell-based research of high throughput drug screening.
Biosensing Techniques ; instrumentation ; methods ; Cells, Cultured ; Drug Evaluation, Preclinical ; methods ; Endothelial Cells ; cytology ; Hepatocytes ; cytology ; Humans ; Microfluidic Analytical Techniques ; instrumentation ; methods ; Microfluidics ; instrumentation ; methods ; Umbilical Veins ; cytology

To study the inhibitory effect of Nogo-A shRNA on cell line PC12, the Nogo-A shRNA (short hairpin RNA, or shRNA) was designed and synthesized. The annealed shRNA template was inserted into plasmid pGenesil-1 containing enhanced green fluorescent protein (EGFP) gene by gene cloning technique to generate eukaryotic expression vector. The recombinant plasmid was transfected into PC12 cells by lipofecamine2000 and the mRNA and protein expression level of Nogo-A gene was detected by RT-PCR and Western blotting 48 h after the transfection. Gene sequencing showed that that the Nogo-A shRNA eukaryotic expression vector was successfully constructed. No significant change was found in the Nogo-A mRNA and protein expression level in empty vector-transfected group as compared with controls (P>0.05), while the expression level in shRNA-transfected group decreased significantly (P<0.05). It is concluded that the pGenesil-1/Nogo-AshRNA recombinant plasmid can effectively suppress the expression of Nogo-A gene in PC12 cells.
Cloning, Molecular ; Gene Knockdown Techniques/*methods ; Genetic Vectors ; Green Fluorescent Proteins/genetics ; Myelin Proteins/*genetics ; Myelin Proteins/metabolism ; PC12 Cells ; Plasmids ; RNA Interference ; RNA, Messenger/genetics ; RNA, Messenger/metabolism ; RNA, Small Interfering ; Transfection