In order to explore the effects of lipopolysaccharide(LPS)on the repair of bovine endo-metrial stromal cells(BESCs)during inflammatory response,BESCs were treated by LPS in this study.Cell apoptosis rate was detected using flow cytometry,cell viability was measured using the CCK-8 assay,cell migration ability was observed using a scratch assay,and the expression of con-nective tissue growth factor(CTGF),transforming growth factor-beta 3(TGF-β3)and vascular endothelial growth factor(VEGF)mRNA was measured using qRT-PCR.Additionally,the expression of key proteins in the PI3K/AKT and Wnt/β-catenin signaling pathways was assessed using Western blot analysis.The results showed that cell viability of BESCs significantly decreased(P＜0.01),cell migration ability decreased(P＜0.05),apoptosis rate of BESCs increased(P＜0.01),CTGF and TGF-β3 mRNA expression levels decreased(P＜0.01),while VEGF mRNA ex-pression increased after treatment with LPS(P＜0.01).The phosphorylation levels of PI3K,AKT and GSK-3β proteins decreased(P＜0.05),as well as the expression levels of c-Myc and Cyclin-D1 proteins also decreased(P＜0.01).These results indicated that LPS can inhibit the proliferation of BESCs and promote cell apoptosis possibly through the inhibition of the PI3K/AKT and Wnt/β-catenin signaling pathways.

This paper introduces Professor WANG Jihong's clinical experience in treating refractory lateral epicondylitis using the Wang's crescent technique of blade needle. Based on the classical theories of Huangdi Neijing (the Yellow Emperor's Inner Classic) such as the "twelve sinew meridians" "short needling" and "shu needling", Professor WANG applies a self-designed blade needle with crescent needling method. This approach forms a distinctive treatment philosophy characterized by "sinew meridians as the foundation, selecting points at the pain site; using chicken-claw needling technique deliverd at both internal and external; integration of heaven, earth, and man, using both short and shu needling; treating tendon injuries and inflammation with the crescent technique of blade needle". It embodies the therapeutic concept of "treating tendons and bones simultaneously, harmonizing yin and yang", and shows unique advantages in the treatment of this condition.
Acupuncture Therapy/methods* ; Humans ; Tennis Elbow/therapy* ; Male ; Middle Aged ; Adult ; Needles ; Female ; Acupuncture Points

Objective:To evaluate the safety and efficacy of accelerator-based boron neutron capture therapy (AB-BNCT) in the treatment of recurrent and refractory malignant tumors.Methods:The data of 14 patients admitted to Xiamen Humanity Hospital from September 2022 to April 2023 were prospectively collected, including 7 patients with primary brain malignancies and 7 patients with locally recurrent inoperable head and neck malignancies. All patients received intravenous infusion of boron drug (NBB-001, p-dihydroxyborylphe nylalanine, a patented freeze-dried formulation) at a total nominal dosage of 500 mg/kg (11 patients) or 750 mg/kg (3 patients), and were irradiated with neutrons (operating with NeuPex system). Adverse events after treatment were recorded and assessed. The primary efficacy endpoint was the 90 d objective response rate (ORR), while the secondary endpoints included progression-free survival (PFS) and complete response rate (CRR). Data were compiled and analyzed by SAS 9.4 software. The rate and 95% CI were calculated using Clopper-Pearson method. Results:The median dose delivered to 80% of the target volume (D 80%) was 16.80 GyE (range: 8.93-23.79 GyE). The most common adverse reactions were hyperamylasemia, alopecia, and hyperprolactinemia. Five patients experienced 8 cases of grade 3 or above adverse events, including 1 case of grade 4 acute kidney injury and 7 cases of grade 3 adverse events. All adverse events were recovered after observation or treatment. At 90 d after treatment, the ORR of all patients was 9/14 (64%, 95% CI: 35%-87%), disease control rate (DCR) was 10/14 (71%, 95% CI: 42%-92%), CRR was 2/14 (14%, 95% CI: 2%-42%); and the best overall response during the entire course included an ORR of 10/14 (71% ,95% CI: 42%-92%), DCR of 13/14 (93%, 95% CI: 66%-100%), and CRR of 3/14 (21% ,95% CI: 5%-51%). The 1-year survival rate for head and neck malignancies was 71.4%, and the 2-year survival rate was 42.8%. The 1-year survival rate for recurrent brain malignancies was 42.8%. Conclusion:AB-BNCT demonstrates favorable safety and promising efficacy in treating primary brain malignancies and recurrent/refractory head and neck malignancies, representing a potential therapeutic option.

In order to explore the effects of lipopolysaccharide(LPS)on the repair of bovine endo-metrial stromal cells(BESCs)during inflammatory response,BESCs were treated by LPS in this study.Cell apoptosis rate was detected using flow cytometry,cell viability was measured using the CCK-8 assay,cell migration ability was observed using a scratch assay,and the expression of con-nective tissue growth factor(CTGF),transforming growth factor-beta 3(TGF-β3)and vascular endothelial growth factor(VEGF)mRNA was measured using qRT-PCR.Additionally,the expression of key proteins in the PI3K/AKT and Wnt/β-catenin signaling pathways was assessed using Western blot analysis.The results showed that cell viability of BESCs significantly decreased(P＜0.01),cell migration ability decreased(P＜0.05),apoptosis rate of BESCs increased(P＜0.01),CTGF and TGF-β3 mRNA expression levels decreased(P＜0.01),while VEGF mRNA ex-pression increased after treatment with LPS(P＜0.01).The phosphorylation levels of PI3K,AKT and GSK-3β proteins decreased(P＜0.05),as well as the expression levels of c-Myc and Cyclin-D1 proteins also decreased(P＜0.01).These results indicated that LPS can inhibit the proliferation of BESCs and promote cell apoptosis possibly through the inhibition of the PI3K/AKT and Wnt/β-catenin signaling pathways.

Objective:To evaluate the safety and efficacy of accelerator-based boron neutron capture therapy (AB-BNCT) in the treatment of recurrent and refractory malignant tumors.Methods:The data of 14 patients admitted to Xiamen Humanity Hospital from September 2022 to April 2023 were prospectively collected, including 7 patients with primary brain malignancies and 7 patients with locally recurrent inoperable head and neck malignancies. All patients received intravenous infusion of boron drug (NBB-001, p-dihydroxyborylphe nylalanine, a patented freeze-dried formulation) at a total nominal dosage of 500 mg/kg (11 patients) or 750 mg/kg (3 patients), and were irradiated with neutrons (operating with NeuPex system). Adverse events after treatment were recorded and assessed. The primary efficacy endpoint was the 90 d objective response rate (ORR), while the secondary endpoints included progression-free survival (PFS) and complete response rate (CRR). Data were compiled and analyzed by SAS 9.4 software. The rate and 95% CI were calculated using Clopper-Pearson method. Results:The median dose delivered to 80% of the target volume (D 80%) was 16.80 GyE (range: 8.93-23.79 GyE). The most common adverse reactions were hyperamylasemia, alopecia, and hyperprolactinemia. Five patients experienced 8 cases of grade 3 or above adverse events, including 1 case of grade 4 acute kidney injury and 7 cases of grade 3 adverse events. All adverse events were recovered after observation or treatment. At 90 d after treatment, the ORR of all patients was 9/14 (64%, 95% CI: 35%-87%), disease control rate (DCR) was 10/14 (71%, 95% CI: 42%-92%), CRR was 2/14 (14%, 95% CI: 2%-42%); and the best overall response during the entire course included an ORR of 10/14 (71% ,95% CI: 42%-92%), DCR of 13/14 (93%, 95% CI: 66%-100%), and CRR of 3/14 (21% ,95% CI: 5%-51%). The 1-year survival rate for head and neck malignancies was 71.4%, and the 2-year survival rate was 42.8%. The 1-year survival rate for recurrent brain malignancies was 42.8%. Conclusion:AB-BNCT demonstrates favorable safety and promising efficacy in treating primary brain malignancies and recurrent/refractory head and neck malignancies, representing a potential therapeutic option.

Objective:To explore surgical strategies for acute type A aortic dissection involving severe stenosis or occlusion of the carotid arteries.Methods:From January 2019 to March 2023, a total of 29 patients with acute type A aortic dissection involving severe stenosis or occlusion of the carotid arteries were included in the study. All patients underwent emergency surgery, with simultaneous intraoperative neck incision and replacement of the unilateral or bilateral carotid arteries. Among them, there were 19 males with a mean age of(49.57±2.14)years old. Preoperative brain CT indicated abnormalities in 15 cases, transient neurological dysfunction occurred in 5 cases, and syncope in 1 case.Results:Procedures included ascending aorta replacement in 10 cases, Bentall procedure in 18 cases, and Wheat procedure in 1 case. Arch operations involved partial arch replacement in 3 cases and Sun’s procedure in 26 cases. Simple left carotid artery replacement was performed in 6 cases, simple right carotid artery replacement in 19 cases, and bilateral carotid artery replacement in 4 cases. Cerebral protection measures during circulatory arrest included unilateral cerebral perfusion in 24 cases and bilateral cerebral perfusion in 5 cases. The mean operation time was(7. 6±0. 3) h, with a mean cardiopulmonary bypass time of(196. 3±8. 7) min, aortic cross-clamp time of(113.2±6.4) min, ischemic time 12(5-16.5) min, and lowest temperature of(26.3±0.4)°C. One patient experienced in-hospital mortality. Postoperatively, new neurological dysfunction occurred in 2 cases, including 1 case with coma and permanent neurological deficit.Conclusion:In patients with acute type A aortic dissection involving severe stenosis or occlusion of the carotid arteries, simultaneous carotid artery replacement via neck incision during aortic surgery is a safe and reliable surgical approach.

BACKGROUND:The output of computed tomography (CT) is Digital Imaging and Communications in Medicine (DICOM), whereas the input of three-dimensional (3D) printing is an object Standard Template Library model represented by a triangular mesh. The process of data handing and forrmat conversion are keys to the combination of these two techniques. OBJECTIVE:To explore how to convert CT data into a stereoscopic 3D model efficiently. METHODS:The DICOM in Medicine format data of the patients with femoral fractures were edited and produced by Mimics. We made a 3D model by adjusting the parameters of the 3D printer slicing software, and discussed the significance of 3D model in medical field, especially orthopedics. RESULTS AND CONCLUSION:Mimics software is the bridge to connect two-dimensional CT scan images and 3D images, to create a 3D model by editing the data of DICOM which comes from the CT scanner, with a 3D printing technology. The 3D Model can help doctors for routine clinical diagnosis and treatment, to improve the communication between doctors and patients and the quality of clinical medical teaching. 3D printing also makes medicine more personalized, remote, minimally invasive, and promote the development of medicine to the direction of digital medicine.

Objective To analyze the regions of abdominal lymph node metastasis in recurrent thoracic esophageal squamous cell carcinoma ( TE-SCC) after radical surgery, and to guide the design of target volume in postoperative adjuvant radiotherapy. Methods Patients with TE-SCC who were admitted to our hospital from February 2005 to April 2013 were enrolled as subjects. All patients were diagnosed with abdominal lymph node metastasis by imaging after R0 radical surgery. The exact regions of abdominal lymph node metastasis were classified according to the 7th edition of American Joint Committee on Cancer ( AJCC) TNM staging system for gastric cancer, and then retrospectively analyzed. The difference of two group was analyzed by χ2 test. Results Among the 1593 eligible patients, 148( 9. 3%) were diagnosed with abdominal lymph node metastasis after surgery. In the 148 patients, the abdominal lymph node metastasis rates in the upper, middle, and lower thoracic esophagus were 2. 3%, 7. 8%, and 26. 6%, respectively ( P=0. 000);the incidence rates of pathological stages T1/2 and T3/4 were 8. 7% and 9. 5%, respectively ( P=0. 601);the incidence rates of 0-2 and ≥3 metastatic lymph nodes in postoperative pathological examination were 4. 8%and 20. 1%, respectively (P=0. 000). The abdominal lymph node metastasis rate was the highest in the para-aortic lymph node ( 16a2) , followed by para-aortic lymph node ( 16a1) and the lymph nodes around the celiac trunk, posterior area of the pancreatic head, and common hepatic artery ( 64. 9%, 41. 2%, 37. 8%, 32. 4%, and 20. 9%) , yielding an overall metastasis rate of 91. 9%. Conclusions The major regions of abdominal lymph node metastasis in esophageal carcinoma after radical surgery include para-aortic lymph nodes ( 16a2 and 16a1) and the lymph nodes around the celiac trunk, posterior area of the pancreatic head, and common hepatic artery. These regions are the abdominal target volumes of postoperative adjuvant radiotherapy.

Objective Negative pressure aspirator clogging ( OSAC) frequently occurs in orthopedic surgery .This study was to investigate the frequency , location , and mechanisms of OSAC in China by analysis of the current status and clinical observation of OSAC so as to provide evidence for the solution of the problem . Methods Using the two-stage random sampling method , we conduc-ted a questionnaire survey on OSAC among 738 clinical orthopedists during the 16th and 17th Chinese Orthopedic Association Confer-ences.Totally, 160 out 1200 orthopedic surgeries were randomly selected in the time order of operation , including 38 cases of total hip arthroplasty ( THA) , 39 cases of total knee arthroplasty ( TKA) , 43 cases of extremity and spinal fractures surgery , and 40 cases of other orthopedic surgeries .We also obtained the satisfaction scores with the existing aspirators from related medical professionals . Results Among the 738 respondents included into the analysis , 706 (95.7%) thought that OSAC often occurred during surgery , 631 (85.5%) considered THA to be the leading cause of OSAC , and 714 (96.7%) regarded the tip and hose joint of the aspirator as the common causes . The mean satisfaction score with the existing aspirators was 7.62 ±0.74.Clinical observation showed the mean frequency of OSAC to be 2.55 ±1.62 in THA, 1.95 ±1.33 in TKA, 1.52 ±1.18 in extremity and spinal fracture surgeries , and 0.95 ± 0.68 in other orthopedic surgeries , and the satisfaction score to be 7.36 ±0.84. Conclusion OSAC has a high incidence rate during orthopedic surgeries in China , thus affecting orthopedic surgery and reducing orthopedists'satisfaction with the aspirators . The current negative pressure aspirator system demands prompt improvement .

BACKGROUND:Autologous tissue-engineered bone marrow mesenchymal stem cel s (BMSCs) transplantation is one of the most common methods of treating early osteonecrosis of femoral head, but now there is stil no any special-purpose grafter available in the market. Such surgical transplantation is a laborious, time-consuming and tedious process, which goes against its clinical promotion. OBJECTIVE:To develop a supporting, efficient, special-purpose grafter, to solve the difficulty in stem cel s transplantation during core decompression of femoral head. METHODS:CAD software was used to perform solid modeling for this special-purpose grafter and print them by three-dimensional (3D) fast printing technology. The performance of this special-purpose grafter was tested by femoral head core decompression combined with BMSCs transplantation. It was compared with traditional surgical instrument in terms of duration of operation, intraoperative blood loss, visual analogue scale (VAS) of stem cel/biological fiber col agen complex omission amount and doctor’s satisfaction score. RESULTS AND CONCLUSION:(1) A kind of special-purpose grafter was developed by 3D printing technology rapidly. (2) Compared with the control group, duration of operation, intraoperative blood loss, VAS scores and doctor’s satisfaction scores were significantly improved in the trial group (P<0.05). (3) CAD software combined with 3D printing technology is a highly efficient means for front-line clinicians to perform independent development. The research and development of this special-purpose grafter provides a perfect solution to the laborious, time-consuming and tedious process of cel/biological col agen fiber transplantation.