In 2022， Hainan provincial government launched the project for the prevention and control of viral hepatitis with the goals of a hepatitis B screening rate of 90%， a diagnostic rate of 90%， and a treatment rate of 80% among people aged 18 years and above by the year 2025， and the main intervention measures include population-based prevention， case screening， antiviral therapy， and health management. As of December 31， 2024， a total of 6.875 million individuals in the general population had been screened for hepatitis B， with a screening rate of 95.6%. A total of 184 710 individuals with positive HBsAg were identified， among whom 156 772 were diagnosed through serological reexamination， resulting in a diagnostic rate of 84.9%. A total of 50 742 patients with chronic hepatitis B were identified， among whom 42 921 had hepatitis B-specific health records established for health management， with a file establishment rate of 84.6%. A total of 31 553 individuals received antiviral therapy， with a treatment rate of 62.2%. A total of 2.503 million individuals at a high risk of hepatitis C were screened， among whom 4 870 tested positive for HCV antibody and 3 858 underwent HCV RNA testing， resulting in a diagnostic rate of 79.2%， and 1 824 individuals with positive HCV RNA were identified， among whom 1 194 received antiviral therapy， with a treatment rate of 65.5%. In addition， 159 301 individuals with negative HBsAg and anti-HBs and an age of 20 — 40 years were inoculated with hepatitis B vaccine free of charge. Through the implementation of the project for the prevention and control of viral hepatitis， a large number of hepatitis patients have been identified， treated， and managed in the province within a short period of time， which significantly accelerates the efforts to eliminate the crisis of viral hepatitis.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

BACKGROUND: Chronic kidney disease (CKD) is associated with common pathophysiological processes, such as inflammation and fibrosis, in both the heart and the kidney. However, the underlying molecular mechanisms that drive these processes are not yet fully understood. Therefore, this study focused on the molecular mechanism of heart and kidney injury in CKD. METHODS: We generated an microRNA (miR)-26a knockout (KO) mouse model to investigate the role of miR-26a in angiotensin (Ang)-II-induced cardiac and renal injury. We performed Ang-II modeling in wild type (WT) mice and miR-26a KO mice, with six mice in each group. In addition, Ang-II-treated AC16 cells and HK2 cells were used as in vitro models of cardiac and renal injury in the context of CKD. Histological staining, immunohistochemistry, quantitative real-time polymerase chain reaction (PCR), and Western blotting were applied to study the regulation of miR-26a on Ang-II-induced cardiac and renal injury. Immunofluorescence reporter assays were used to detect downstream genes of miR-26a, and immunoprecipitation was employed to identify the interacting protein of LIM and senescent cell antigen-like domain 1 (LIMS1). We also used an adeno-associated virus (AAV) to supplement LIMS1 and explored the specific regulatory mechanism of miR-26a on Ang-II-induced cardiac and renal injury. Dunnett's multiple comparison and t -test were used to analyze the data. RESULTS: Compared with the control mice, miR-26a expression was significantly downregulated in both the kidney and the heart after Ang-II infusion. Our study identified LIMS1 as a novel target gene of miR-26a in both heart and kidney tissues. Downregulation of miR-26a activated the LIMS1/integrin-linked kinase (ILK) signaling pathway in the heart and kidney, which represents a common molecular mechanism underlying inflammation and fibrosis in heart and kidney tissues during CKD. Furthermore, knockout of miR-26a worsened inflammation and fibrosis in the heart and kidney by inhibiting the LIMS1/ILK signaling pathway; on the contrary, supplementation with exogenous miR-26a reversed all these changes. CONCLUSIONS Our findings suggest that miR-26a could be a promising therapeutic target for the treatment of cardiorenal injury in CKD. This is attributed to its ability to regulate the LIMS1/ILK signaling pathway, which represents a common molecular mechanism in both heart and kidney tissues.
Animals ; MicroRNAs/metabolism* ; Angiotensin II/toxicity* ; Mice ; Renal Insufficiency, Chronic/chemically induced* ; Mice, Knockout ; Disease Models, Animal ; Male ; Signal Transduction/genetics* ; LIM Domain Proteins/genetics* ; Mice, Inbred C57BL ; Cell Line ; Humans

BACKGROUND: Telesurgery has the potential to overcome spatial limitations for surgeons, which depends on surgical robot and the quality of network communication. However, the influence of network latency and bandwidth on telesurgery is not well understood. METHODS: A telesurgery system capable of dynamically adjusting image compression ratios in response to bandwidth changes was established between Beijing and Sanya (Hainan province), covering a distance of 3000 km. In total, 108 animal operations, including 12 surgical procedures, were performed. Total latency ranging from 170 ms to 320 ms and bandwidth from 15-20 Mbps to less than 1 Mbps were explored using designed surgical tasks and hemostasis models for renal vein and internal iliac artery rupture bleeding. Network latency, jitter, frame loss, and bit rate code were systemically measured during these operations. National Aeronautics and Space Administration Task Load Index (NASA-TLX) and a self-designed scale measured the workload and subjective perception of surgeons. RESULTS: All 108 animal telesurgeries, conducted from January 2023 to June 2023, were performed effectively over a total duration of 3866 min. The operations were completed with latency up to 320 ms and bandwidths as low as 1-5 Mbps. Hemostasis for vein and artery rupture bleeding models was effectively achieved under these low bandwidth conditions. The NASA-TLX results indicated that latency significantly impacted surgical performance more than bandwidth and image clarity reductions. CONCLUSIONS This telesurgery system demonstrated safety and reliability. A total of 320 ms latency is acceptable for telesurgery operations. Reducing image clarity can effectively mitigate the potential latency increase caused by decreased bandwidth, offering a new method to reduce the impact of latency on telesurgery.
Animals ; Robotic Surgical Procedures/methods* ; Laparoscopy/methods*

Obsessive-compulsive disorder （OCD） is a highly disabling mental disorder that impairs patients' social function and quality of life， and impose a substantial economic burden. Intolerance of uncertainty （IU） refers to a cognitive bias in perceiving， interpreting and responding to uncertain situations or events. IU is closely associated with the cognitive patterns of OCD patients. Based on magnetic resonance imaging （MRI）， this paper discusses the research progress of the relationship between IU and psychopathological characteristics of OCD， and put forward the research direction， aims to provide evidence-based references for the development of optimized therapeutic interventions for OCD.

Objective To analyze the clinical efficacy of valve surgeries for infective endocarditis and the affecting factors, and compare the early- and long-term postoperative outcomes of different surgery approaches. Methods The patients with infective endocarditis who underwent valve replacement/valvuloplasty in our hospital from 2010 to 2022 were retrospectively collected. The clinical data of the patients were analyzed. Results A total of 343 patients were enrolled, including 197 patients with mechanical valve replacement, 62 patients with bioprosthetic valve replacement, and 84 patients with valvuloplasty. There were 238 males and 105 females with an average age of (44.2±14.8) years. Single-valve endocarditis was present in 200 (58.3%) patients, and multivalve involvement was present in 143 (41.7%) patients. Sixty (17.5%) patients had suffered thrombosis before surgery, including cerebral embolisms in 32 patients. The mean follow-up time was (60.6±43.8) months. Early mortality within one month after the surgery occurred in 17 (5.0%) patients, while later mortality occurred in 19 (5.5%) patients. Eight (2.3%) patients underwent postoperative dialysis, 13 (3.8%) patients suffered postoperative stroke, 6 patients underwent reoperation, and 3 patients suffered recurrence of infective endocarditis. Smoking (P=0.002), preoperative embolisms (P=0.001), duration of surgery (P=0.001), and postoperative dialysis (P=0.001) were risk factors for early mortality, and left ventricular ejection fraction ≥60% (P=0.022) was protective factor for early mortality. New York Heart Association classification Ⅲ-Ⅳ (P=0.010) and ≥3 valve procedures (P=0.028) were risk factors for late mortality. The rate of composite endpoint events was significantly lower in the valvuloplasty group than that in the valve replacement group. Conclusion For patients with infective endocarditis, smoking and preoperative embolisms are associated with high postoperative mortality, multiple-valve surgery is associated with a poorer prognosis, and valvuloplasty has advantages over valve replacement and should be attempted in the surgical management of patients with infective endocarditis.

Objective To construct a predictive model for cerebral small vessel disease (CSVD) MRI burden based on β2-microglobulin (β2-MG) and lipoprotein(a) [Lp(a)], analyze its predictive value, and validate the model. Methods A total of 138 CSVD patients admitted to Anhui No.2 Provincial People’s Hospital from February 2023 to August 2024 were enrolled. Patients were divided into a low-burden group (n=63) and a moderate/severe burden group (n=75) according to the CSVD MRI burden scoring criteria. The related clinical data were compared between the two groups. Binary logistic regression analysis was used to identify independent factors for CSVD moderate/severe MRI burden. A nomogram predictive model was constructed based on these factors and its performance was evaluated. Results The proportions of male patients, as well as those with a history of diabetes or hypertension, were significantly higher in the moderate/severe burden group than those in the low burden group. Additionally, the age of patients in the moderate/severe burden group was significantly older, and the levels of β2-MG, Lp(a), and homocysteine (Hcy) were higher than those in the low burden group (P＜0.01). Binary logistic regression analysis revealed that hypertension, diabetes, β2-MG, and Lp(a) were independent factors for CSVD moderate/severe MRI burden (P＜0.05). The nomogram predictive model based on these four factors had a cut-off value of 0.467 0, with an area under curve (AUC) of 0.838 7 (95%CI 0.760 8-0.916 6) in the training set (n＝97) and 0.854 1 (95%CI 0.742 1-0.966 1) in the internal validation set (n＝41) . The calibration curve demonstrated good agreement between predicted and observed values. Decision curve analysis (DCA) indicated that the nomogram model had good clinical utility. Conclusions The nomogram model based on β2-MG and Lp(a) has high predictive performance in assessing the risk of CSVD moderate/severe MRI burden, with good discrimination and calibration.

BACKGROUND: Generalized pustular psoriasis (GPP), a rare and recurrent autoinflammatory disease, imposes a substantial burden on patients and society. Awareness of GPP in China remains limited. METHODS: This cross-sectional survey, conducted between September 2021 and May 2023 across 14 hospitals in China, included GPP patients of all ages and disease phases. Data collected encompassed demographics, clinical characteristics, economic impact, disease severity, quality of life, and treatment-related complications. Risk factors for GPP recurrence were analyzed. RESULTS: Among 127 patients (female/male ratio = 1.35:1), the mean age of disease onset was 25 years (1st quartile [Q1]-3rd quartile [Q3]: 11-44 years); 29.2% had experienced GPP for more than 10 years. Recurrence occurred in 75.6% of patients, and nearly half reported no identifiable triggers. Younger age at disease onset ( P  = 0.021) and transitioning to plaque psoriasis ( P  = 0.022) were associated with higher recurrence rates. The median diagnostic delay was 8 months (Q1-Q3: 2-41 months), and 32.3% of patients reported misdiagnoses. Comorbidities were present in 53.5% of patients, whereas 51.1% experienced systemic complications during treatment. Depression and anxiety affected 84.5% and 95.6% of patients, respectively. During GPP flares, the median Dermatology Life Quality Index score was 19.0 (Q1-Q3: 13.0-23.5). This score showed significant differences between patients with and without systemic symptoms; it demonstrated correlations with both depression and anxiety scores. Treatment costs caused financial hardship in 55.9% of patients, underscoring the burden associated with GPP. CONCLUSIONS The substantial disease and economic burdens among Chinese GPP patients warrant increased attention. Patients with early onset disease and those transitioning to plaque psoriasis require targeted interventions to mitigate the high recurrence risk.
Humans ; Male ; Female ; Psoriasis/pathology* ; Adult ; Cross-Sectional Studies ; Adolescent ; Child ; Young Adult ; Quality of Life ; Middle Aged ; China/epidemiology* ; Recurrence ; Risk Factors ; Surveys and Questionnaires ; East Asian People

The inheritance, innovation, and development of traditional Chinese medicine(TCM) need to be based on Chinese medicinal materials. The TCM seed industry is the source of TCM production, which is related to the stable supply and quality safety of TCM. This paper summarizes the basic situation of the TCM seed industry and introduces relevant policies and regulations to TCM seeds in the seed industry and the TCM field. At present, the Management Measures of TCM Seeds and Seedlings has not yet promulgated, and TCM seeds are classified as non-major crops in the category of crops for management. This paper also describes the current situation of TCM seed and seedling system construction, which is in the development stage, from six aspects, including the construction of TCM seed industry technical support system; the establishment of TCM seed standard; the construction of germplasm resource preservation system; TCM seed testing, variety registration, and variety protection; production and management of TCM seeds; TCM seed supervision. According to the development status of the TCM seed industry, four problems are put forward, including imperfect systems and standards relevant to TCM seeds, insufficient supervision and law enforcement regarding TCM seeds, insufficient policy measures and capital investment to promote the development of the industry, and the industry's falling into a low-level cycle.Accordingly, four suggestions are provided, including improving laws, regulations, and policies, perfecting standards and norms,strengthening supervision and law enforcement, and promoting support system construction, in order to boost the high-quality development of the TCM seed industry.
Seeds/chemistry* ; Medicine, Chinese Traditional ; Drugs, Chinese Herbal/standards* ; Plants, Medicinal/chemistry*