BACKGROUND:For thoracolumbar spine fractures with developmental stenosis of the vertebral arch,accurate nail placement is difficult using traditional fluoroscopy-assisted techniques.O-arm navigation assistance systems offer higher precision in general vertebral arch nail placement,but there is scarce literature on the application of O-arm navigation-assisted nail placement in thoracolumbar spine fractures with developmental stenosis of the vertebral arch both domestically and abroad. OBJECTIVE:To explore the accuracy of percutaneous vertebral arch nail placement assisted by O-arm navigation in patients with thoracolumbar spine fractures complicated by developmental stenosis of the vertebral arch. METHODS:A retrospective analysis was conducted on 53 patients who underwent percutaneous vertebral arch screw fixation surgery at Department of Orthopedics,General Hospital of Central Theater Command of PLA for thoracolumbar spine fractures complicated by developmental stenosis of the vertebral arch from January 2021 to March 2023.Totally 208 cases of vertebral arch developmental stenosis were found(cases with multiple vertebral arch developmental stenosis were counted separately).Based on the surgical approach,the patients were divided into two groups:O-arm navigation group(n=98)and C-arm fluoroscopy group(n=110).Postoperative imaging data were compared between the two groups,including anatomical perforation score,functional perforation score,actual vs.expected nail trajectory in the horizontal plane,and sagittal plane angle differences. RESULTS AND CONCLUSION:(1)There was no significant difference in the narrowest width of the pedicle isthmus(pow)between the two groups of patients(P>0.05).The proportions of different degrees of narrowing(mild:6 mm≤pow<7 mm,moderate:5 mm≤pow<6 mm,severe:pow<5 mm)were also not significantly different between the two groups(P>0.05).(2)The overall grade and scores of anatomical perforation and functional perforation were lower in the O-arm group compared to the C-arm group,and these differences were statistically significant(P<0.001).In terms of the angular deviation between the actual and planned screw trajectories,the O-arm group had smaller deviations,and these differences were statistically significant(P<0.05).(3)In the mild and moderate narrowing groups,the O-arm group showed significant advantages in anatomical perforation,functional perforation,and angular deviation between actual and planned screw trajectories,and these differences were statistically significant(P<0.001).(4)The O-arm group demonstrated better performance in anatomical perforation and functional perforation,especially in the T12-L2 segment,with more significant advantages.Additionally,the O-arm group had better angular deviations in actual and planned screw trajectories in all segments compared to the C-arm group.(5)Therefore,the use of O-arm navigation-assisted percutaneous screw placement for the treatment of thoracolumbar fractures with developmental pedicle isthmal narrowing provides higher accuracy and safer surgery.

BACKGROUND: Neuroticism has been associated with numerous health outcomes. However, most research has focused on a single specific disorder and has produced controversial results, particularly regarding mortality risk. Here, we aimed to examine the association of neuroticism with morbidity and mortality and to elucidate how neuroticism affects trajectories from a healthy state, to one or more neuroticism-related disorders, and subsequent mortality risk. METHODS: We included 483,916 participants from the UK Biobank at baseline (2006-2010). Neuroticism was measured using the Eysenck Personality Questionnaire. Three clusters were constructed, including worry, depressed affect, and sensitivity to environmental stress and adversity (SESA). Cox proportional hazards regression and multistate models were used. Linear regression was used to examine the association between neuroticism and immune parameters and neuroimaging measures. RESULTS: High neuroticism was associated with 37 non-overlapping diseases, including increased risk of infectious, cardiometabolic, neuropsychiatric, digestive, and respiratory diseases, and decreased risk of cancer. After adjustment for sociodemographic variables, physical measures, healthy behaviors, and baseline diagnoses, moderate-to-high neuroticism was associated with a decreased risk of all-cause mortality. In multistate models, high neuroticism was associated with an increased risk of transitions from a healthy state to a first neuroticism-related disease (hazard ratio [HR] [95% confidence interval (CI)] = 1.09 [1.05-1.13], P  <0.001) and subsequent transitions to multimorbidity (1.08 [1.02-1.14], P  = 0.005), but was associated with a decreased risk of transitions from multimorbidity to death (0.90 [0.84-0.97], P for trend = 0.006). The leading neuroticism cluster showing a detrimental role in the health-illness transition was depressed affect, which correlated with higher amygdala volume and lower insula volume. The protective effect of neuroticism against mortality was mainly contributed by the SESA cluster, which, unlike the other two clusters, did not affect the balance between innate and adaptive immunity. CONCLUSION This study provides new insights into the differential role of neuroticism in health outcomes and into new perspectives for establishing mortality prevention programs for patients with multimorbidity.
Humans ; Neuroticism/physiology* ; Male ; Female ; Middle Aged ; Aged ; Proportional Hazards Models ; Surveys and Questionnaires ; Adult ; Risk Factors

OBJECTIVE: To explore the anatomical parameters of the cervical uncinate process "inflection point" through cervical CT angiography (CTA) and MRI measurements, offering a reliable and safe anatomical landmark for anterior cervical decompression surgery. METHODS: A retrospective analysis was conducted on the cervical CTA and MRI imaging data of normal adults who met the selection criteria between January 2020 and January 2024. The CTA dataset included 326 cases, with 200 males and 126 females, aged 22-55 years (mean, 46.7 years). The MRI dataset included 300 cases, with 200 males and 100 females, aged 18-55 years (mean, 43.7 years). Based on the CTA data, three-dimensional models of C ₃-C ₇ were constructed, and the following measurements were obtained from the superior view: uncinate process "inflection point" to vertebral artery distance (UIVD), uncinate process tip to vertebral artery distance (UTVD), uncinate process "inflection point" to "inflection point" distance (UID), uncinate process long-axis to sagittal angle (ULSA), and uncinate process "inflection point" to transverse foramen-sagittal angle (UITSA). From the anterior view, the anterior uncinate process to sagittal angle (AUSA) was measured. From the posterior view, the posterior uncinate process to sagittal angle (PUSA) was measured. Based on the MRI data, uncinate process "inflection point" to dural sac distance (UIDD) and dural sac width (DSW) were measured. The trends in measurement parameters of C ₃-C ₇ were observed, and the differences in measurement parameters between genders and between the left and right sides of the same segment were compared, as well as the difference in UID and DSW within the same segment was compared. RESULTS: The measurement parameters from C ₃ to C ₇ in the CTA data showed a general increasing trend, with no significant difference between the left and right sides within the same segment ( P>0.05). The UIVD, UTVD, and UID were greater in males than in females, with significant differences observed in the UIVD and UTVD at C ₃ and C ₆ and UID at C ₃, C ₆, and C ₇ ( P<0.05). The MRI measured DSW showed a general increasing trend from C ₃ to C ₇, and the DSW at C ₆ was greater in females than in males, with a significant difference ( P<0.05). The UIDD showed a gradual decreasing trend, with the smallest value at C ₆. There was no significant difference between males and females or between the left and right sides within the same segment ( P>0.05). The UID was greater than the DSW at C ₃-C ₇, and the differences were significant ( P<0.05). CONCLUSION The uncinate process "inflection point" is a constant anatomical structure located at the anteromedial aspect of the uncinate process tip and laterally to the dural sac. It maintains a certain safe distance from the vertebral artery. As a decompression landmark in anterior cervical spine surgery, it not only ensures surgical safety but also guarantees complete decompression.
Humans ; Adult ; Male ; Female ; Middle Aged ; Retrospective Studies ; Cervical Vertebrae/surgery* ; Magnetic Resonance Imaging ; Decompression, Surgical/methods* ; Young Adult ; Adolescent ; Computed Tomography Angiography ; Imaging, Three-Dimensional ; Vertebral Artery/anatomy & histology* ; Anatomic Landmarks/diagnostic imaging*

Digital technologies have become an integral part of complete denture restoration. With advancement in computer-aided design and computer-aided manufacturing (CAD/CAM), tools such as intraoral scanning, facial scanning, 3D printing, and numerical control machining are reshaping the workflow of complete denture restoration. Unlike conventional methods that rely heavily on clinical experience and manual techniques, digital technologies offer greater precision, predictability, and efficacy. They also streamline the process by reducing the number of patient visits and improving overall comfort. Despite these improvements, the clinical application of digital complete denture restoration still faces challenges that require further standardization. The major issues include appropriate case selection, establishing consistent digital workflows, and evaluating long-term outcomes. To address these challenges and provide clinical guidance for practitioners, this expert consensus outlines the principles, advantages, and limitations of digital complete denture technology. The aim of this review was to offer practical recommendations on indications, clinical procedures and precautions, evaluation metrics, and outcome assessment to support digital restoration of complete denture in clinical practice.
Humans ; Denture, Complete ; Computer-Aided Design ; Denture Design/methods* ; Consensus ; Printing, Three-Dimensional

In 2009,the World Health Organization included snakebite on the list of neglected tropical diseases,acknowledging it as a common occupational hazard for farmers,plantation workers,and others,causing tens of thousands of deaths and chronic physical disabilities every year.This guideline aims to provide practical information to help clinical professionals evaluate and treat snakebite victims.These recommendations are based on clinical experience and clinical research evidence.This guideline focuses on the following topics:snake venom,clinical manifestations,auxiliary examination,diagnosis,treatments,and prevention.

Objective: To investigate the association between physical activity frequency and anxiety/depression symptoms among college students in Jiangxi Province, so as to provide a basis for the physical and mental health development of adolescents. Methods: From July to October 2023, 5 761 college students from 11 colleges and universities in Jiangxi Province were selected by convenience sampling to conduct an online questionnaire survey regarding physical activity and mental health. Anxiety symptoms and depressive symptoms were assessed by General Anxiety Disorder Scale-7 and Patient Health Questionnaires-9, respectively. Contingency table was used to analyze the distribution of different anxiety and depression symptoms by physical activity frequency, and ordered Logistic regression was used to analyze the association between physical activity frequency with anxiety and depressive symptoms, and stratified analysis was performed based on gender. Results: The detection rate of anxiety symptoms of college students was 43.6% ( n =2 513), and the detection rate of depression symptoms was 63.9% ( n =3 682). There were significant differences in the detection rate of anxiety and depression symptoms among different gender and physical activity frequency groups ( χ 2=15.98, 106.32; 30.65, 150.88, P <0.05). The detection rates of severe anxiety and depression symptoms of male and female who never exercise were higher (severe anxiety: 6.1% for male and 5.2% for female, severe depression: 8.7% for male and 7.4% for female).The results of ordered Logistic regression analysis showed that compared with college students who never exercised, male college students who were physically active almost every day were negatively correlated with mild anxiety and moderate depression symptoms ( OR=0.53，0.33，P <0.05). In addition, male college students who do physical activity 3-4 times a week were negatively correlated with moderate depressive symptoms ( OR =0.43), while male college students who do physical activity 1-2 times a week were negatively correlated with severe depressive symptoms ( OR =0.21) ( P <0.05). Physical activity was negatively correlated with different degress of anxiety and depression symptoms in female college students (anxiety: OR =0.27-0.74, depression: OR =0.18-0.75, P < 0.05). Conclusions The frequency of physical activity in college students (especially female college students) is negatively correlated with anxiety and depressive symptoms. It is suggested to improve the frequency of physical activity to promote physical and mental health.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Using big data and artificial intelligence to establish a multi-point monitoring, early warning, and disposal system to achieve early warning and intervention of infectious disease outbreaks is an important means of controlling the spread of the epidemic. Taking Xiaoshan district as an example, this study analyzes the monitoring contents, warning methods, and application effectiveness of the infectious disease monitoring, early warning and disposal system. Based on Xiaoshan′s health big data resources, the system starts with syndrome, disease diagnosis and etiology. Through advanced technologies such as artificial intelligence and block chain, it realizes early identification of infectious disease outbreaks, data fusion, multi-cross collaboration, and closed-loop management. It has improved the sensitivity of clustered outbreaks monitoring and the effectiveness of epidemic disposal and provided a reference for grassroots disease prevention and control departments to establish an infectious disease monitoring and early warning system.

Using big data and artificial intelligence to establish a multi-point monitoring, early warning, and disposal system to achieve early warning and intervention of infectious disease outbreaks is an important means of controlling the spread of the epidemic. Taking Xiaoshan district as an example, this study analyzes the monitoring contents, warning methods, and application effectiveness of the infectious disease monitoring, early warning and disposal system. Based on Xiaoshan′s health big data resources, the system starts with syndrome, disease diagnosis and etiology. Through advanced technologies such as artificial intelligence and block chain, it realizes early identification of infectious disease outbreaks, data fusion, multi-cross collaboration, and closed-loop management. It has improved the sensitivity of clustered outbreaks monitoring and the effectiveness of epidemic disposal and provided a reference for grassroots disease prevention and control departments to establish an infectious disease monitoring and early warning system.