ObjectiveTo compare the differences between wild Alpiniae Oxyphyllae Fructus（WAOF） and cultivated Alpiniae Oxyphyllae Fructus（CAOF） through a traditional quality evaluation system for medicinal materials. MethodsA total of 10 batches of WAOF and 12 batches of CAOF samples were collected from various regions of Hainan province. Relevant analytical methods from the 2020 edition of the Pharmacopoeia of the People's Republic of China were employed to observe the characteristics of WAOF and CAOF， followed by microscopic identification， thin-layer chromatography（TLC） identification， moisture content（toluene method）， total ash， acid-insoluble ash， water-soluble and alcohol-soluble extracts（hot dipping method）， water-soluble protein， total polysaccharides and total flavonoids（ultraviolet spectrophotometry）， and volatile oil content（method A under general rule 2204）. The contents of five active components（protocatechuic acid， chrysin， kaempferol， tectochrysin and nootkatone） were quantified using ultra-performance liquid chromatography（UPLC）， and the antioxidant activity was evaluated. Building upon traditional quality evaluation of AOF， quantitative measurements were conducted on its appearance traits including diameter， length， plumpness（diameter/length ratio）， and color. Canonical correlation analysis was performed using SPSS 26.0 to explore relationships between appearance traits and intrinsic quality. ResultsNo significant differences were observed between WAOF and CAOF in microscopic observation， TLC identification， moisture content， protocatechuic acid content， kaempferol content， odor， or antioxidant activity measured by 2，2ʹ-azino-bis（3-ethylbenzothiazoline-6-sulfonic acid）（ABTS） method. WAOF exhibited significantly higher levels in water-soluble extracts， alcohol-soluble extracts， total polysaccharide content， water-soluble protein content， 100-grain weight， length， and total color difference（ΔE^*ab） compared to CAOF（P<0.01）. In contrast， CAOF showed significantly higher levels of total ash， acid-insoluble ash， content of total flavonoids， volatile oil content， chrysin content， tectochrysin content， nootkatone content， diameter， plumpness， lightness（L^*）， red-green chromaticity（a^*）， yellow-blue chromaticity（b^*）， and antioxidant activity measured by 1，1-diphenyl-2-picrylhydrazyl（DPPH） method compared to WAOF（P<0.01）. Correlation analysis between 7 phenotypic traits and 8 quality traits revealed that among the phenotypic traits， plumpness， L^*， a^*， and b^* exerted significant influence on intrinsic quality. Among the quality traits， total flavonoids， volatile oils， nootkatone， chrysin， and tectochrysin contributed substantially to intrinsic quality. ConclusionPlumpness， L^*， a^*， and b^* of AOF significantly influence its intrinsic quality， and higher values of these parameters indicate relatively superior intrinsic quality. The comprehensive quality evaluation reveals that CAOF samples collected in this study are superior to their wild counterparts.

ObjectiveTo investigate the distribution characteristics and correlation of paired oral and esophageal microbiota in patients with esophageal squamous cell carcinoma （ESCC）. MethodsA total of 46 pathologically confirmed ESCC patients were enrolled， and oral swabs and cancerous tissue samples were collected. The microbial composition was analyzed using 16S rRNA gene sequencing， and bioinformatics methods were employed to compare the microbiota diversity， compositional differences， and correlations between the two sites. ResultsThe Alpha diversity of the oral microbiota in ESCC patients was significantly higher than that of their esophageal microbiota， though the overall community structure was similar between the two sites. LEfSe analysis revealed that Spirochaetes， Prevotella， Catonella， Enterococcus， Fusobacterium periodonticum， Veillonella parvula， Capnocytophaga sputigena， and Neisseria subflava were significantly enriched in ESCC tumor tissues. In contrast， Actinobacteria， Proteobacteria， Streptococcus， Neisseria， Haemophilus， Streptococcus mitis， Haemophilus parainfluenzae， Porphyromonas gingivalis， Haemophilus haemolyticus， and Prevotella tannerae were significantly enriched in the oral cavity. Correlation analysis demonstrated significant associations between the two sites at taxonomic levels such as Spirochaetes， Treponema， Granulicatella elegans， Neisseria macacae， Treponema amylovorum， Fusobacterium periodonticum， and Neisseria meningitidis （P<0.05）. ConclusionThe oral and esophageal microbiota in ESCC patients exhibit both distinct differences and similarities. Oral microbiota may influence the esophageal microenvironment through migration or local immune modulation.

ObjectiveOxygen partial pressure (pO₂) is a critical indicator of the tumor microenvironment and plays an essential role in regulating tumor progression and therapeutic response, particularly for oxygen-dependent treatments such as photodynamic therapy (PDT). Although photoacoustic imaging (PAI) has shown great potential for functional and molecular imaging, conventional oxygenation imaging approaches based on hemoglobin absorption mainly provide relative oxygen saturation information and cannot directly quantify tissue oxygen partial pressure. Therefore, this study aimed to develop a fast laser sequence-based pump-probe photoacoustic tomography (PP-PAT) system for quantitative, non-invasive, and dynamic monitoring of oxygen partial pressure in tumor tissues. MethodsThe proposed PP-PAT system was developed based on the oxygen-sensitive triplet-state lifetime characteristics of methylene blue (MB). Upon optical excitation, MB molecules undergo transitions from the ground state to an excited state and subsequently form metastable triplet states through intersystem crossing. The lifetime of the triplet state is strongly affected by surrounding oxygen concentration due to dynamic oxygen quenching, providing a direct correlation between triplet-state kinetics and local oxygen partial pressure. A dual-wavelength pump-probe excitation scheme was implemented to selectively interrogate MB triplet-state dynamics. The pump pulse was used to initiate the triplet-state population, while the delayed probe pulse was applied to detect the transient triplet-state response. By optimizing the temporal interval between the pump and probe pulses, transient triplet-state differential (TTD) signals were extracted to enhance the specificity of oxygen-dependent molecular information and suppress background interference from conventional photoacoustic signals. The performance of the PP-PAT system was systematically evaluated through phantom and in vivo experiments. First, a single-tube phantom containing MB solution was used to investigate signal stability, reproducibility, and the influence of signal averaging on imaging quality. Subsequently, a dual-tube phantom model was established to simulate oxygen consumption during PDT, where one MB-containing tube was exposed to laser irradiation and the other served as a control. Finally, in vivo experiments were performed using a subcutaneous tumor model in nude mice. MB was locally injected into the tumor region before imaging to evaluate the feasibility of tumor oxygen partial pressure mapping using the proposed PP-PAT system. ResultsPhantom experiments demonstrated that the extracted TTD signals exhibited high stability and effectively reflected MB triplet-state dynamics while reducing non-specific background contributions. Signal averaging significantly improved the signal-to-noise ratio, and 50 repeated acquisitions provided an optimal compromise between image quality and acquisition efficiency. In the dual-tube phantom experiments, continuous PDT irradiation induced progressive oxygen depletion in the treated sample. The corresponding TTD decay rate gradually decreased, accompanied by an increase in the calculated triplet-state lifetime, indicating reduced oxygen quenching and decreased oxygen partial pressure. In contrast, the control sample showed relatively stable TTD kinetics and oxygenation levels during the same period. These results demonstrated that PP-PAT could quantitatively characterize oxygen consumption dynamics associated with photochemical reactions. In vivo experiments further demonstrated the capability of PP-PAT for spatially resolved oxygen partial pressure imaging in MB-injected tumor tissues. The reconstructed pO₂ maps revealed heterogeneous oxygen distributions within tumors, showing relatively hypoxic regions in the tumor core and higher oxygenation levels near the tumor boundary. This spatial oxygen distribution pattern was consistent with the typical physiological characteristics of solid tumors, where abnormal vascular structures and limited oxygen diffusion result in intratumoral oxygen gradients. ConclusionThis study presents a fast laser sequence-based PP-PAT system capable of quantitative and non-invasive imaging of tissue oxygen partial pressure. By utilizing the oxygen-dependent triplet-state lifetime of MB and extracting TTD signals, the proposed method provides molecularly specific information related to oxygen dynamics beyond conventional photoacoustic oxygenation imaging. The system enables dynamic monitoring of oxygen consumption during PDT and reveals spatial oxygen heterogeneity within tumors. This technique provides a promising imaging approach for tumor hypoxia characterization, evaluation of oxygen-dependent therapeutic responses, and precision-guided cancer treatment.

The recombinant human thyroid-stimulating hormone (rhTSH) can be used for differentiated thyroid cancer (DTC) preparation before ¹³¹I therapy, and follow-up. Since its approval by the American Food and Drug Administration (FDA) in 1998, rhTSH has been clinically used in European countries, the United States, and other countries for nearly 30 years. In April 2024, China’s first independently developed rhTSH agent was approved. Based on clinical experience and evidence from domestic and international studies, an expert consensus on the application of rhTSH has been developed following thorough consultations among experts. The consensus offers evidence-based recommendations to guide the appropriate use of rhTSH in clinical practice.

ObjectiveThe proteome of biological evidence contains rich genetic information, namely single amino acid polymorphisms (SAPs) in protein sequences. However, due to the lack of efficient and convenient analysis tools, the application of SAP in public security still faces many challenges. This paper aims to meet the application requirements of SAP analysis for forensic biological evidence’s proteome data. MethodsThe software is divided into three modules. First, based on a built-in database of common non-synonymous single nucleotide polymorphisms (nsSNPs) and SAPs in East Asian populations, the software integrates and annotates newly identified exonic nsSNPs as SAPs, thereby constructing a customized SAP protein sequence database. It then utilizes a pre-installed search engine—either pFind or MaxQuant—to perform analysis and output SAP typing results, identifying both reference and variant types, along with their corresponding imputed nsSNPs. Finally, SAPTyper compares the proteome-based typing results with the individual’s exome-derived nsSNP profile and outputs the comparison report. ResultsSAPTyper accepts proteomic DDA mass spectrometry raw data (DDA acquisition mode) and exome sequencing results of nsSNPs as input and outputs the report of SAPs result. The pFind and Maxquant search engines were used to test the proteome data of 2 hair shafts of2 individuals, and both obtained SAP results. It was found that the results of the Maxquant search engine were slightly less than those of pFind. This result shows that SAPTyper can achieve SAP fingding function. Moreover, the pFind search engine was used to test the proteome data of 3 hair shafts from 1 European person and 1 African person in the literature. Among the sites fully matched by the literature method, sites detected by SAPTyper are also included; for semi-matching sites, that is, nsSNPs are heterozygous, both literature method and SAPTyper method had the risk of missing detection for one type of the allele. Comparing the analysis results of SAPTyper with the SAP test results reported in the literature, it was found that some imputed nsSNP sites identified by the literature method but not detected by SAPTyper had a MAF of less than 0.1% in East Asian populations, and therefore they were not included in the common nsSNP database of East Asian populations constructed by this software. Since the database construction of this software is based on the genetic variation information of East Asian populations, it is currently unable to effectively identify representative unique common variation sites in European or African populations, but it can still identify SAP sites shared by these populations and East Asian populations. ConclusionAn automated SAP analysis algorithm was developed for East Asian populations, and the software named SAPTyper was developed. This software provides a convenient and efficient analysis tool for the research and application of forensic proteomic SAP and has important application prospects in individual identification and phenotypic inference based on SAP.

The etiology of nervous system diseases is complicated, posing significant harm to patients and often resulting in poor prognoses. In recent years, the role of dopaminergic system in nervous system diseases has attracted much attention, and its complex regulatory mechanism and therapeutic potential have been gradually revealed. This paper reviews the role of dopaminergic neurons, the neurotransmitter dopamine, dopamine receptors and dopamine transporters in neurological diseases (including Alzheimer's disease, Parkinson's disease and schizophrenia), with a view to further elucidating the disease mechanism and providing new insights and strategies for the treatment of neurological diseases.
Humans ; Dopamine/metabolism* ; Nervous System Diseases/physiopathology* ; Parkinson Disease/physiopathology* ; Receptors, Dopamine/metabolism* ; Dopaminergic Neurons/physiology* ; Dopamine Plasma Membrane Transport Proteins/metabolism* ; Alzheimer Disease/physiopathology* ; Schizophrenia/physiopathology* ; Animals

Process analytical technology(PAT) is a key means for digital transformation and upgrading of the traditional Chinese medicine(TCM) manufacturing process, serving as an important guarantee for consistent and controllable TCM product quality. Near-infrared(NIR) spectroscopy has become the core technology for measuring the TCM manufacturing process. By incorporating NIR spectroscopy into PAT and starting from the construction of a smart platform for the TCM manufacturing process, this paper systematically described the development history and innovative application of the combination of NIR spectroscopy with chemometrics in measuring the TCM manufacturing process by the research team over the past two decades. Additionally, it explored the application of a validation method based on accuracy profile(AP) in the practice of NIR spectroscopy. Furthermore, the software development progress driven by NIR spectroscopy supported by modeling technology was analyzed, and the prospect of integrating NIR spectroscopy in smart factory control platforms was exemplified with the construction practices of related platforms. By integrating with the smart platform, NIR spectroscopy could improve production efficiency and guarantee product quality. Finally, the prospect of the smart platform application in measuring the TCM manufacturing process was projected. It is believed that the software development for NIR spectroscopy and the smart manufacturing platform will provide strong technical support for TCM digitalization and industrialization.
Spectroscopy, Near-Infrared/methods* ; Drugs, Chinese Herbal/analysis* ; Software ; Medicine, Chinese Traditional ; Quality Control

Medical institutions, with their clinical practice foundation and abundant human use experience data, have become important carriers for the inheritance and innovation of traditional Chinese medicine(TCM) and the "cradles" of the preparation of new TCM. To effectively promote the transformation of new TCM originating from the TCM clinical practice in medical institutions and establish an effective evaluation index system for the transformation of new TCM conforming to the characteristics of TCM, consensus experts adopted the literature research, questionnaire survey, Delphi method, etc. By focusing on the policy and technical evaluation of new TCM originating from the TCM clinical practice in medical institutions, a comprehensive evaluation from the dimensions of drug safety, efficacy, feasibility, and characteristic advantages was conducted, thus forming a comprehensive evaluation system with four primary indicators and 37 secondary indicators. The expert consensus reached aims to encourage medical institutions at all levels to continuously improve the high-quality research and development and transformation of new TCM originating from the TCM clinical practice in medical institutions and targeted at clinical needs, so as to provide a decision-making basis for the preparation, selection, cultivation, and transformation of new TCM for medical institutions, improve the development efficiency of new TCM, and precisely respond to the public medication needs.
Medicine, Chinese Traditional/standards* ; Humans ; Consensus ; Drugs, Chinese Herbal/therapeutic use* ; Surveys and Questionnaires

The quality of traditional Chinese medicine(TCM) is a critical foundation for ensuring the stability of its efficacy, as well as the safety and effectiveness of its clinical use. The identification of critical quality attributes(CQAs) is one of the core components of TCM preparation quality control. This study focuses on Jianwei Xiaoshi Tablets and explores their CQAs related to property and flavor from the perspective of taste receptor proteins. Three taste receptor proteins, T1R2, T1R3, and TRPV1, were selected, and a biosensor based on high-electron-mobility transistor(HEMT) was constructed to detect the interactions between Jianwei Xiaoshi Tablets and taste receptor proteins. Simultaneously, liquid chromatography-mass spectrometry(LC-MS) technology was used to analyze the chemical composition of Jianwei Xiaoshi Tablets. In examining the interaction strength, the results indicated that the interaction between Jianwei Xiaoshi Tablets and TRPV1 protein was the strongest, followed by T1R3, with the interaction with T1R2 being relatively weaker. By combining biosensing technology with LC-MS, 16 chemical components were identified from Jianwei Xiaoshi Tablets, among which six were selected as CQAs for sweetness and seven for pungency. Further validation experiments demonstrated that CQAs such as hesperidin and hesperetin had strong interactions with their corresponding taste receptor proteins. Through the combined use of multiple technological approaches, this study successfully determined the property and flavor-related CQAs of Jianwei Xiaoshi Tablets. It provides novel ideas and approach for the identification of CQAs in TCM preparations and offers comprehensive theoretical support for TCM quality control, contributing to the improvement and development of TCM preparation quality control systems.
Drugs, Chinese Herbal/chemistry* ; Biosensing Techniques/methods* ; TRPV Cation Channels/chemistry* ; Tablets/chemistry* ; Receptors, G-Protein-Coupled/genetics* ; Quality Control ; Taste ; Humans ; Mass Spectrometry

This study established the HPLC fingerprints and a multi-component content determination method for Bidens pilosa var. radiata and B. pilosa and conducted comprehensive evaluation by integrating fingerprint similarity comparison, cluster analysis(CA), and principal component analysis(PCA), aiming to provide a reference for the establishment of quality standards for Bidentis Herba. HPLC was launched on an Agilent Poroshell 120 EC-C_(18) chromatographic column(4.6 mm×250 mm, 4 μm) by gradient elution with a mobile phase of 0.1% aqueous phosphoric acid-acetonitrile at a flow rate of 0.7 mL·min~(-1), detection wavelength of 270 nm, column temperature of 25 ℃, and an injection volume of 5 μL. The fingerprint similarity of 20 batches of Bidentis Herba ranged from 0.775 to 0.979. A total of 20 common peaks were identified, and seven components were confirmed through comparison with reference substances: neochlorogenic acid, chlorogenic acid, isochlorogenic acid A, isochlorogenic acid B, isochlorogenic acid C, rutin, and hyperoside. These seven components exhibited good linearity within the ranges of 3.4-67.4, 33.0-660.3, 26.6-531.2, 3.5-70.5, 6.2-124.9, 2.4-48.3, and 4.6-91.5 μg·mL~(-1), respectively, with correlation coefficients(r) greater than 0.999. The average recovery rates ranged from 96.47% to 104.6%. CA and PCA classified the 20 batches of Bidentis Herba into two categories. PCA yielded two principal components, with a cumulative variance contribution rate of 80.557%. The established HPLC fingerprints and multi-component content determination method are simple and accurate, providing a scientific basis for the quality control and quality standard formulation of Bidentis Herba.
Chromatography, High Pressure Liquid/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Chemometrics/methods* ; Bidens/chemistry* ; Principal Component Analysis