Objective: To compare the consistency between bioelectrical impedance analysis (BIA) and dual energy X ray absorptiometry (DXA) in measuring body composition among Tibetan children and adolescents and to explore the applicability of BIA in plateau region, so as to provide scientific and convenient body composition measurement support among children and adolescents. Methods: From May to June, 2022, a total of 344 Tibetan children and adolescents aged 6-17 years were selected from Golmud Municipal National Middle School and Changjiangyuan Nationality Primary School in Qinghai Province by cluster sampling method, and their fat mass, fat mass percentage and lean mass were measured by DXA and BIA. The consistency and correlation between the two methods were assessed by using the Wilcoxon rank-sum test, Spearman correlation analysis, intraclass correlation coefficient (ICC), and Bland-Altman analysis. Results: DXA measured fat mass and fat mass percentage were significantly higher than those obtained by BIA (6-12 years old: Z =9.91, 11.28; 13-17 years old: Z =9.02, 10.21), while lean mass and lean mass percentage were significantly lower than BIA results (6-12 years old: Z =-11.60, -11.30; 13-17 years old: Z =-10.77, -10.36) (all P < 0.05 ). The two methods showed strong correlations in fat mass and lean mass (all r >0.80, all ICC >0.90), but exhibited poor agreement in fat mass percentage and lean mass percentage (6-12 years old: Lin s CCC =0.64, 0.41; 13-17 years old: Lin s CCC = 0.79 , 0.35). Bland-Altman analysis showed that the difference between the two methods was negatively correlated with the average value in FM%(6-12 years old: r =-0.75, 13-17 years old: r =-0.79, both P <0.01). Conclusion BIA and DXA show high consistency in measuring body fat mass and lean body mass in Tibetan children and adolescents, although some bias is still present in certain individuals.

To summarize the clinical characteristics, antibody spectrum and neuroelectrophysiological features of autoimmune nodopathy(AN), and to explore the phenotypic differences among different antibody-positive subgroups.

Objective: To investigate the association between brain and muscle Arnt like protein 1( BMAL 1) gene and ambulatory blood pressure (ABP) parameters in college students, and to explore the influence of the interaction between the gene and weight status on the ABP levels, so as to provide reference for early prevention of chronic cardiovascular diseases related to hypertension. Methods: During September 2022 to June 2024, a total of 510 college students were recruited from a university in Changsha, China for on site questionnaire investigation, physical examination, ABP monitoring and genotyping testing. Multiple linear regression method was used to explore the association between the BMAL 1 gene and ABP indicators. An interaction term was included in the general linear model of multiple linear regression to analyze the interactive effects of BMAL 1 gene polymorphisms and weight status on ABP levels. Results: The prevalence of abnormal 24 hour blood pressure, abnormal daytime blood pressure, and abnormal nighttime blood pressure were 3.3%, 3.1%, and 3.9%, respectively. Multiple linear regression analysis showed that the BMAL 1/rs7950226 polymorphism was positively correlated with the 24 hour diastolic blood pressure(DBP) and the daytime DBP level after adjusting for gender, age, and body mass index( β =0.87,0.99, both P <0.05). Also, interaction between BMAL 1/ rs 11022775 and weight status on the nighttime DBP level ( P interaction =0.03) was found. The CC genotype carriers had significantly higher nighttime DBP level ( β =3.52, P <0.05) among overweight/obesity college students, but no differences in nocturnal DBP levels were observed between CC genotype carriers and TT+CT genotype carriers among college students with normal body weight( P > 0.05). Conclusions The rs 7950226 polymorphism is associated with 24 hours DBP and daytime DBP levels. Significant interaction between rs 11022775 with weight status on the nighttime DBP level is found among college students.

ObjectiveTo elucidate the critical role of rehabilitation medical records (including electronic records) in rehabilitation medicine's clinical practice and management, comprehensively analyzed the structure, core content and data standards of rehabilitation medical records, to develop a standardized medical record data architecture and core dataset suitable for rehabilitation medicine and to explore the application of rehabilitation data in performance evaluation and payment. MethodsBased on the regulatory documents Basic Specifications for Medical Record Writing and Basic Specifications for Electronic Medical Records (Trial) issued by National Health Commission of China, and referencing the World Health Organization (WHO) Family of International Classifications (WHO-FICs) classifications, International Classification of Diseases (ICD-10/ICD-11), International Classification of Functioning, Disability and Health (ICF), and International Classification of Health Interventions (ICHI Beta-3), this study constructed the data architecture, core content and data standards for rehabilitation medical records. Furthermore, it explored the application of rehabilitation record summary sheets (home page) data in rehabilitation medical statistics and payment methods, including Diagnosis-related Groups (DRG), Diagnosis-Intervention Packet (DIP) and Case Mix Index. ResultsThis study proposed a systematic standard framework for rehabilitation medical records, covering key components such as patient demographics, rehabilitation diagnosis, functional assessment, rehabilitation treatment prescriptions, progress evaluations and discharge summaries. The research analyzed the systematic application methods and data standards of ICD-10/ICD-11, ICF and ICHI Beta-3 in the fields of medical record terminology, coding and assessment. Constructing a standardized data structure and data standards for rehabilitation medical records can significantly improve the quality of data reporting based on the medical record summary sheet, thereby enhancing the quality control of rehabilitation services, effectively supporting the optimization of rehabilitation medical insurance payment mechanisms, and contributing to the establishment of rehabilitation medical performance evaluation and payment based on DRG and DIP. ConclusionStructured rehabilitation records and data standardization are crucial tools for quality control in rehabilitation. Systematically applying the three reference classifications of the WHO-FICs, and aligning with national medical record and electronic health record specifications, facilitate the development of a standardized rehabilitation record architecture and core dataset. Standardizing rehabilitation care pathways based on the ICF methodology, and developing ICF- and ICD-11-based rehabilitation assessment tools, auxiliary diagnostic and therapeutic systems, and supporting terminology and coding systems, can effectively enhance the quality of rehabilitation records and enable interoperability and sharing of rehabilitation data with other medical data, ultimately improving the quality and safety of rehabilitation services.

Objective:To evaluate the effects of glutamine-enriched parenteral nutrition on short-term postoperative outcomes compared with conventional nutritional support in colorectal cancer patients with enteral nutrition intolerance after surgery.Method:A retrospective cohort study was conducted to collect clinical data from colorectal cancer patients who underwent radical resection at the Department of Gastrointestinal Surgery of Zunyi Medical University Affiliated Hospital from January 2019 to December 2021.The differences in postoperative complication rates,perioperative nutritional indicators,and inflammatory factors between the two groups were analyzed.SPSS 29.0 software was used for statistical analysis.Result:Based on whether glutamine was added to parenteral nutrition,178 patients were divided into a control group(conventional nutritional therapy,n=120)and an observation group(glutamine enhanced nutritional therapy,n=58).The incidence of postoperative complications(Clavien Dindo grade≥III)in the control and observation groups was 14.17%(17/120)and 3.45%(2/58),respectively,with a statistically significant difference(P=0.030).The observation group recovered faster than the control group in terms of time to first expectoration,defecation and intake of liquid diet after surgery,and had a shorter hospital stay after surgery(P<0.05).However,there was no significant difference in the 30-day readmission rate between the two groups(P=0.393).There was no statistically significant difference in the changes in total protein,albumin,pre-albumin,neutrophil/lymphocyte ratio and endogenous creatinine clearance rate between the two groups of patients after surgery(P>0.05).There were also significant differences in the changes in lymphocyte count,white blood cell count,neutrophil percentage,alanine aminotransferase,aspartate aminotransferase,total bilirubin,and urea nitrogen levels between the two groups of patients after surgery(P<0.05).Conclusion:Compared with regular nutritional support,postoperative parenteral glutamine supplementation can reduce the incidence of postoperative complications in colorectal cancer patients,promote recovery of bowel function,shorten postoperative hospital stay,improve patient immune function and reduce inflammatory levels.

With the growing emphasis on maternal and child oral health, the significance of managing oral health across preconception, pregnancy, and infancy stages has become increasingly apparent. Oral health challenges extend beyond affecting maternal well-being, exerting profound influences on fetal and neonatal oral development as well as immune system maturation. This expert consensus paper, developed using a modified Delphi method, reviews current research and provides recommendations on maternal and child oral health management. It underscores the critical role of comprehensive oral assessments prior to conception, diligent oral health management throughout pregnancy, and meticulous oral hygiene practices during infancy. Effective strategies should be seamlessly integrated across the life course, encompassing preconception oral assessments, systematic dental care during pregnancy, and routine infant oral hygiene. Collaborative efforts among pediatric dentists, maternal and child health workers, and obstetricians are crucial to improving outcomes and fostering clinical research, contributing to evidence-based health management strategies.
Humans ; Pregnancy ; Female ; Infant ; Consensus ; Mouth Diseases/therapy* ; Pregnancy Complications/therapy* ; Oral Health ; Infant, Newborn ; Delphi Technique ; Oral Hygiene

ObjectiveTo investigate the current status of latent tuberculosis infection (LTBI) among the elderly population in rural areas of Changxing County, Zhejiang Province, and to provide an evidence for the development of LTBI prevention and control measures. MethodsBetween January and May 2024, elderly individuals participating in urban and rural residents’ health checkups were screened for Mycobacterium tuberculosis infection using a domestically produced interferon-γ release assay (IGRA) kit. Individuals tested positive by IGRA but without active tuberculosis were classified as LTBI cases. The prevalence of LTBI among the participants was subsequently analyzed. ResultsAmong the 6 765 subjects, 637 tested positive by IGRA, including one identified active tuberculosis patient, resulting in a LTBI prevalence rate of 9.40%. There was a statistically significant difference in positivity rates across different IGRA methodologies (χ²=35.530, P<0.001). Higher LTBI rate was observed in males, individuals with a history of diabetes mellitus, and those with a history of pulmonary tuberculosis, exhibiting statistically significant differences (χ²=32.401, P<0.001; χ²=5.789, P=0.020; χ²=39.248, P<0.001, respectively.) No statistically significant difference in LTBI rate was found across different age groups (χ²=0.238, P=0.971). ConclusionThe prevalence of LTBI among the elderly rural residents in Changxing County is relatively low. Male, individuals with a history of diabetes mellitus, and those with a history of pulmonary tuberculosis have an increased risk of LTBI, warranting targeted risk monitoring and timely interventions.

Objective To design an 8-channel gene analyzer to take the place of the widely used gene analyzer with problems in inconvenient consumable replacement and short storage time of electrophoresis polymer.Methods The 8-channel gene analyzer had its mechanical components composed of an automatic sample loading table,a polymer injection module,a high-voltage temperature control module,an optical module and an integrated U box,its electrical control system made up of a host computer(an embedded computer)and three slave computers(a sampling control board,a polymer injection control board and a high-voltage temperature control board).The automatic sample loading table involved in four motors and transmission systems for x,y,z directions and optical alignment,the transmission systems adopted mainly belt drive mode and the optical alignment motor had its threads with an anti-backlash structure;the polymer injuection module was manipulated by the polymer injection control board,and the polymer block was made of highly transparent acrylic material;the high-voltage temperature control module realized the regulation of electrophoresis voltage and the detection of electrophoresis current by the low-ripple precision high-voltage power supply,and controlled the temperature of the heating furnace by the proportional-integral-differential(PID)algorithm;the optical module consisted of an excitation module and a light-receiving module,which had the base of the reflector made of low expansion coefficient alloy material;the integrated U box had the electrophoresis polymer,capillary array,polymer block and anode buffer in a plastic housing;the host computer had the data acquisition software programmed with C# and C++,and the slave computers were controlled by STM32 SCM.Results The 8-channel gene analyzer had no significant differences with the widely used ABI3500 gene analyzer in resolution,precision accuracy and clinical results.Conclusion The 8-channel gene analyzer gains advantages in consumable replacement and storage time of electrophoresis polymer,and can meet the requirements for gene sequencing.[Chinese Medical Equipment Journal,2025,46(2):24-30]

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.