OBJECTIVES: To study the epidemiological characteristics of respiratory syncytial virus (RSV) infection in hospitalized children with community-acquired pneumonia (CAP) in Hebei Province. METHODS: Hospitalized children with CAP who tested positive for RSV and were admitted to Hebei Children's Hospital from various cities and counties across Hebei Province between January 2019 and December 2023 were included in the study. Clinical data were collected and analyzed to assess epidemiological characteristics. RESULTS: The clinical data of 43 978 children with CAP were collected, with an overall RSV detection rate of 25.98%. The detection rate was higher during the implementation of non-pharmaceutical interventions (NPIs) (30.60%) than in the non-NPIs period. Winter and spring were the primary epidemic seasons for RSV each year except in 2022. The detection rate in males (26.62%) was higher than in females (25.06%) (P<0.001). The highest detection rate (59.18%) was found in infants aged 29 days to <1 year. Single RSV infection was more common, with rhinovirus being the most frequent co-infection. CONCLUSIONS The overall RSV detection rate in Hebei Province is influenced by NPIs, being higher during their implementation. RSV predominantly circulates in winter and spring. The detection rate of RSV is higher in males and infants. RSV infection is primarily single, most often co-occurring with rhinovirus.
Humans ; Respiratory Syncytial Virus Infections/epidemiology* ; Female ; Male ; Infant ; Child, Preschool ; Seasons ; China/epidemiology* ; Infant, Newborn ; Community-Acquired Infections/epidemiology* ; Child

BACKGROUND: There is a gap in understanding the effects of different acupoints and treatment methods (acupuncture and moxibustion) on microcirculatory changes in the lumbar region. OBJECTIVE: This study aimed to assess the thermal effects of acupuncture at Weizhong (BL40), with acupuncture at Chize (LU5) and moxibustion at both acupoints as control interventions. DESIGN, SETTING, PARTICIPANTS AND INTERVENTIONS: In this randomized controlled trial, 140 healthy participants were equally divided into four groups: acupuncture at BL40 (Acu-BL40), acupuncture at LU5 (Acu-LU5), moxibustion at BL40 (Mox-BL40) and moxibustion at LU5 (Mox-LU5). Participants underwent a 30-minute session of their assigned treatment. Infrared thermal imaging was used to collect temperature data on the areas of interest for analysis. MAIN OUTCOME MEASURES: The primary measure was the change in average temperature of the observed area after the intervention. The secondary measures included periodic temperature changes every 5 min and the temperature changes of the Governor Vessel and Bladder Meridian in the observed area after the intervention. RESULTS: Significant interactions were observed between treatments and acupoints affecting temperature (P < 0.001). The Acu-BL40 group showed a notably higher increase in mean temperature after 30 min compared to the Acu-LU5 and Mox-BL40 groups, with increases of 0.29 (95% confidence interval [CI] = 0.17 to 0.41) and 0.24 (95% CI = 0.08 to 0.41) °C, respectively. CONCLUSION: Acupuncture at BL40 acupoint can significantly increase the mean temperature in the observed area, highlighting the specific thermal effect of acupuncture compared to moxibustion in the lumbar area. This suggests a potential therapeutic benefit of acupuncture at BL40 for managing lumbar conditions. TRIAL REGISTRATION ClinicalTrials.gov (NCT05665426). Please cite this article as: Zheng SY, Wang XY, Lin LN, Liu S, Huang XX, Liu YY, Yu XS, Pan W, Fang JQ, Liang Y. Lumbar temperature change after acupuncture or moxibustion at Weizhong (BL40) or Chize (LU5) in healthy adults: A randomized controlled trial. J Integr Med. 2025; 23(2): 145-151.
Adult ; Female ; Humans ; Male ; Young Adult ; Acupuncture Points ; Acupuncture Therapy ; Body Temperature ; Healthy Volunteers ; Lumbosacral Region/physiology* ; Moxibustion ; Adolescent

This research investigated the contamination level,distribution of drug-resistant strains,and molecular epidemiologi-cal characteristics of Campylobacter,and further explored transmission pathways and prevention strategies.Cecum,chicken carcass,chicken product,and environmental samples,as well as swabs from workers'hands,were collected from a slaughterhouse in a large broiler group in the Jiaodong area between August 2023 and July 2024.Quantitative contamination assessment of Campylobacter in chicken carcasses and chicken products was performed.After microbial mass spectrometry identification,the representative strains of different links were selected for drug resistance testing and whole genome sequencing(WGS).On the basis of the sequencing results,the resistance genes,virulence genes,multilocus sequence typing(MLST),and phylogenetic characteristics of representative strains were analyzed.Homology comparisons were performed between isolates and strains from patients with diarrhea in the NCBI database.A total of 297 Campylobacter strains were isolated from 806 samples,and the overall detection rate was 36.85%.The detection rate of Campylobacter was highest in the evisceration process(47.33%),followed by the cutting process(35.64%).Overall,the Campylo-bacter detection rate first increased,then decreased,and subsequently increased.Drug sensitivity testing revealed that 90 isolates were resistant to nalidixic acid and ciprofloxacin,and 94.97%of isolates were resistant to tetracycline.WGS showed that both Campylo-bacter jejuni(C.jejuni)and Campylobacter coli(C.coli)carried many drug resistance and virulence genes.ST-14176 of C.jejuni was isolated for the first time herein.The predominant ST-8261 strain of C.jejuni and ST-860,ST-829,and ST-1586 strains of C.coli are known to cause human diarrhea.LOS expression genes associated with Guillain-Barré syndrome(GBS)were detected in both C.jejuni isolates from the slaughter chain and patients with GBS.Some strains exhibited close genetic relatedness to human-derived Campylo-bacter strains from the NCBI database.The detection rate of Campylobacter in the slaughterhouse first increased,then decreased,and subsequently increased,and the quantitative contamination level of each link was similar to the detection rate.Quantitative analysis of chicken carcasses/products revealed that the average bacterial load was highest in eviscerated carcasses(102.80 cfu/g),and the high-est amount of Campylobacter in chicken products reached 451.80 cfu/g.Abundant drug resistance genes and virulence genes were iden-tified,and the drug resistance genes were highly correlated with the drug resistance rate.Therefore,surveillance intensity and control measures for Campylobacter in slaughter processes should be strengthened.

This research investigated the contamination level,distribution of drug-resistant strains,and molecular epidemiologi-cal characteristics of Campylobacter,and further explored transmission pathways and prevention strategies.Cecum,chicken carcass,chicken product,and environmental samples,as well as swabs from workers'hands,were collected from a slaughterhouse in a large broiler group in the Jiaodong area between August 2023 and July 2024.Quantitative contamination assessment of Campylobacter in chicken carcasses and chicken products was performed.After microbial mass spectrometry identification,the representative strains of different links were selected for drug resistance testing and whole genome sequencing(WGS).On the basis of the sequencing results,the resistance genes,virulence genes,multilocus sequence typing(MLST),and phylogenetic characteristics of representative strains were analyzed.Homology comparisons were performed between isolates and strains from patients with diarrhea in the NCBI database.A total of 297 Campylobacter strains were isolated from 806 samples,and the overall detection rate was 36.85%.The detection rate of Campylobacter was highest in the evisceration process(47.33%),followed by the cutting process(35.64%).Overall,the Campylo-bacter detection rate first increased,then decreased,and subsequently increased.Drug sensitivity testing revealed that 90 isolates were resistant to nalidixic acid and ciprofloxacin,and 94.97%of isolates were resistant to tetracycline.WGS showed that both Campylo-bacter jejuni(C.jejuni)and Campylobacter coli(C.coli)carried many drug resistance and virulence genes.ST-14176 of C.jejuni was isolated for the first time herein.The predominant ST-8261 strain of C.jejuni and ST-860,ST-829,and ST-1586 strains of C.coli are known to cause human diarrhea.LOS expression genes associated with Guillain-Barré syndrome(GBS)were detected in both C.jejuni isolates from the slaughter chain and patients with GBS.Some strains exhibited close genetic relatedness to human-derived Campylo-bacter strains from the NCBI database.The detection rate of Campylobacter in the slaughterhouse first increased,then decreased,and subsequently increased,and the quantitative contamination level of each link was similar to the detection rate.Quantitative analysis of chicken carcasses/products revealed that the average bacterial load was highest in eviscerated carcasses(102.80 cfu/g),and the high-est amount of Campylobacter in chicken products reached 451.80 cfu/g.Abundant drug resistance genes and virulence genes were iden-tified,and the drug resistance genes were highly correlated with the drug resistance rate.Therefore,surveillance intensity and control measures for Campylobacter in slaughter processes should be strengthened.

Neck dissection(ND)is one of the main treatment methods for oral and maxillofacial malignancies.Although ND type is in con-stant improvement,but intraoperative peal-pull-push injury of the accessory nerve,muscle,muscle membrane,fascia and ligament induced shoulder syndrome(SS)is still a common postoperative complication,combined with the influence of radiochemotherapy,not only can cause pain,stiffness,numbness,limited dysfunction of shoulder neck and arm,but also may have serious impact on patient's life quality and phys-ical and mental health.At present,there is still a lack of a systematic evaluation and rehabilitation management program for postoperative SS of oral and maxillofacial malignant tumors.Based on the previous clinical practice and the current available evidence,refer to the relevant lit-erature at home and abroad,the experts in the field of maxillofacial tumor surgery and rehabilitation were invited to discuss,modify and reach a consenusus on the etiology,assessment diagnosis,differential diagnosis,rehabilitation strategy and prevention of SS,in order to provide clinical reference.

Objective To investigate the effectiveness of real-time tracking and virtual reality technology(RTVI)used to assist the intraoperative alignment of the trauma orthopaedic surgery robot for the treatment of femoral neck fractures and its impact on the treatment outcome.Methods A retrospective analysis was conducted on 60 patients with femoral neck fractures treated with trauma orthopedic robotic surgery from September 2020 to September 2022.Patients were divided into two groups according to whether RTVI technology was used during surgery to assist robotic surgery.There were 28 patients in the RTVI group(12 males and 16 females),with an average age of(46.2±9.3)years old ranging from 28 to 60 years old.There were 32 patients in the simple Tianji surgical robot group,including 15 males and 17 females,aged(48.2±7.8)years old ranging from 32 to 58.The number of registered fluoroscopy,operation time,total number of intraoperative fluoroscopy,intraoperative blood loss,and hospitalization time of the two groups of patients were observed and recorded.All patients received regular follow-up after surgery,and hip X-rays were routinely reviewed to record Garden alignment index,fracture healing time,postoperative complications,and Harris score.Results All 60 patients were followed up.The RTVI group was followed up for 9 to 16 months with an average of(13.0±l.2)months,and the Tianji surgical robot group alone was followed up for 10 to 14 months with an average of(12.0±1.3)months.During the follow-up period,the femoral neck fractures of both groups of patients healed well,and no complications such as internal fixation loosening and incision infection occurred.The number of registered fluoroscopy,operation time,and number of intraoperative fluoroscopy of patients in the RTVI group were significantly better than those in the simple Tianji surgical robot group(P＜0.01).There was no statistically significant difference in intraoperative blood loss,hospital stay,Garden alignment index,fracture healing time,and hip Harris score between two groups(P＞0.05).Conclusion Although RTVI technology assisted by the surgical robot for femoral neck fracture surgery has little impact on its postoperative outcome,it can effectively reduce the operating time,the number of intraoperative X-ray projections,and the risk of intraopera-tive radiation exposure to patients.It also shortened the learning curve of the operator and better reflected the precision and ef-ficiency of the trauma orthopaedic surgery robot.

Despite significant advancements in treatments for heart failure,the overall prognosis for patients remains poor.Hemodynamic abnormalities in heart failure manifest as elevated left atrial pressure and pulmonary congestion.Previous studies have shown that reducing left atrial pressure can improve symptoms and prognosis for heart failure patients,suggesting that left-sided heart overload may be a potential target for heart failure treatment.Atrial shunting procedures aim to create a stable and controlled left-to-right intracardiac shunt,restoring the decompensated left heart volume and pressure load in heart failure patients to a compensatory state,thereby improving heart failure symptoms and prognosis.Currently,this treatment is still in the clinical research stage globally.Existing data indicate that atrial shunting procedures can lower left atrial pressure at rest or during exercise in heart failure patients,improve pulmonary congestion,enhance patients'exercise tolerance,and clinical cardiac function.However,no studies have yet confirmed that it can improve clinical endpoints such as rehospitalization and mortality due to heart failure.Future research will focus on identifying heart failure patients who may benefit from atrial shunting,with assessments of heart failure etiology,right heart function,and reversibility of pulmonary vascular resistance,as well as heart failure classification based on ejection fraction,serving as potential key factors for patient selection.

Objective    To analyze a new classification of the left apicoposterior segmental bronchus and summarize its clinical significance. Methods     We accessed the computed tomography imaging data of the inpatients treated in the Department of Thoracic Surgery, Henan Provincial People's Hospital between January and November 2021. We observed and classified the branching pattern of the left apicoposterior segmental bronchus (B1+2) using three-dimensional computed tomography bronchography and angiography (3D-CTBA) technique. And we filtered out the patients who underwent thoracoscopic left apicoposterior segmentectomy and analyzed their clinical data retrospectively to summarize the instructing significance of different bronchial classification in the accurate and safe operation of left apicoposterior segmentectomy. Results     Finally 240 patients were collected, including 131 males and 109 females with a median age of 51.0 (19.0-77.0) years. The anatomical pattern of the left apicoposterior segmental bronchus was divided into four main types based on the branching pattern of the outer subsegmental bronchi (B1+2c): type Ⅰ 10% (24 patients), type Ⅱ 54% (130 patients) , type Ⅲ 17% (40 patients) , type Ⅳ 18% (43 patients) and other variations 1% (3 patients). Thirty-two patients smoothly underwent thoracoscopic left apicoposterior segmentectomy, including 23 patients of type Ⅰ and type Ⅱ receiving LS1+2 resection, the other 9 patients of type Ⅲ and type Ⅳ receiving LS1+2 resection (3 patients), LS1+2c resection (4 patients) and LS1+2(a+b) resection (2 patients). Conclusion     This new classification systematically and concisely elucidates the branching characteristics of the left apicoposterior bronchus. Different branching types are instructive to the left apicoposterior segmentectomy.

Tablets represent the most widely used oral solid dosage form in the pharmaceutical industry. Puerarin monohydrate (PUEM), a solid form of the natural antihypertensive drug puerarin, is commercially available. However, the low solubility of PUEM poses a significant challenge for the development of its tablet dosage form. In this study, we successfully prepared the sodium chelates of puerarin (PUE-Na·7H₂O) using reactive crystallization techniques. The crystal structure of PUE-Na·7H₂O was analyzed using single crystal technology, which revealed the structural characteristics of its metal chelate. Our thermodynamic studies demonstrated that the formation of PUE-Na·7H₂O involved the simultaneous deprotonation of PUE and the chelation of PUE^- and Na⁺. This reaction process was spontaneous and exothermic (ΔG < 0, ΔH < 0), and reducing the temperature facilitated the formation of the chelate. Nucleation kinetics studies revealed that chelate molecules were more likely to nucleate and crystallize under low temperature, high concentration, and high rotational speed conditions. Compared to commercially available PUEM, PUE-Na·7H₂O showed significantly improved water solubility, with a 33.5-fold increase in solubility and a 37.6-fold decrease in intrinsic dissolution rate. Our study identified drug-sodium chelation as an effective means for improving drug solubility and elucidated the mechanisms governing its formation kinetics and thermodynamics. These findings could provide new solutions for related product development and tremendous commercial opportunities.

Objective To investigate the clinical effect of unilateral percutaneous vertebroplasty(PVP)combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture.Methods A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study,all of which were vertebral body compression fractures caused by trauma.According to different treatment methods,they were di-vided into experimental group and control group.Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group,there were 5 males and 27 females,aged from 63 to 91 years old with an average of(77.59±8.75)years old.Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty,including 7 males and 38 females,aged from 60 to 88 years old with an average of(74.89±7.37)years old.Operation time,intraoperative C-arm X-ray times,anesthetic dosage,bone cement injection amount,bone cement diffusion good and good rate,complications,vertebral height,kyphotic angle(Cobb angle),visual analogue scale(VAS),Oswestry disability index(ODI)and other indicators were recorded before and after surgery,and statistically analyzed.Results All patients were followed up for 6 to 23 months,with preoperative imaging studies,confirmed for thoracolumbar osteoporosis com-pression fractures,two groups of patients with postoperative complications,no special two groups of patients'age,gender,body mass index(BMI),time were injured,the injured vertebral distribution had no statistical difference(P＞0.05),comparable data.Two groups of patients with bone cement injection,bone cement dispersion rate,preoperative and postoperative vertebral body height,protruding after spine angle(Cobb angle),VAS,ODI had no statistical difference(P＞0.05).The operative time,intra-operative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P＜0.05).Compared with the traditional bilateral puncture group,the modified unilateral puncture group combined with 3D printing technology had shorter operation time,fewer intraoperative fluoroscopy times and less anesthetic dosage.The height of anterior vertebral edge,kyphosis angle(Cobb angle),VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P＜0.05).Conclusion In the treatment of thoracolumbar osteoporotic compression fractures,3D printing technology is used to improve unilateral puncture PVP,which is convenient and simple,less trauma,short operation time,fewer fluoroscopy times,satisfactory distribution of bone cement,vertebral height recovery and kyphotic Angle correction,and good functional improvement.