PURPOSE: The rate of complications among patients undergoing surgery has increased due to infection with SARS-CoV-2 and other variants of concern. However, Omicron has shown decreased pathogenicity, raising questions about the risk of postoperative complications among patients who are infected with this variant. This study aimed to investigate complications and related factors among patients with recent Omicron infection prior to undergoing orthopedic surgery. METHODS: A historical control study was conducted. Data were collected from all patients who underwent surgery during 2 distinct periods: (1) between Dec 12, 2022 and Jan 31, 2023 (COVID-19 positive group), (2) between Dec 12, 2021 and Jan 31, 2022 (COVID-19 negative control group). The patients were at least 18 years old. Patients who received conservative treatment after admission or had high-risk diseases or special circumstances (use of anticoagulants before surgery) were excluded from the study. The study outcomes were the total complication rate and related factors. Binary logistic regression analysis was used to identify related factors, and odds ratio (OR) and 95% confidence interval (CI) were calculated to assess the impact of COVID-19 infection on complications. RESULTS: In the analysis, a total of 847 patients who underwent surgery were included, with 275 of these patients testing positive for COVID-19 and 572 testing negative. The COVID-19-positive group had a significantly higher rate of total complications (11.27%) than the control group (4.90%, p < 0.001). After adjusting for relevant factors, the OR was 3.08 (95% CI: 1.45-6.53). Patients who were diagnosed with COVID-19 at 3-4 weeks (OR = 0.20 (95% CI: 0.06-0.59), p = 0.005), 5-6 weeks (OR = 0.16 (95% CI: 0.04-0.59), p = 0.010), or ≥7 weeks (OR = 0.26 (95% CI: 0.06-1.02), p = 0.069) prior to surgery had a lower risk of complications than those who were diagnosed at 0-2 weeks prior to surgery. Seven factors (age, indications for surgery, time of operation, time of COVID-19 diagnosis prior to surgery, C-reactive protein levels, alanine transaminase levels, and aspartate aminotransferase levels) were found to be associated with complications; thus, these factors were used to create a nomogram. CONCLUSION Omicron continues to be a significant factor in the incidence of postoperative complications among patients undergoing orthopedic surgery. By identifying the factors associated with these complications, we can determine the optimal surgical timing, provide more accurate prognostic information, and offer appropriate consultation for orthopedic surgery patients who have been infected with Omicron.
Humans ; COVID-19/complications* ; Male ; Female ; Middle Aged ; Postoperative Complications/epidemiology* ; SARS-CoV-2 ; Orthopedic Procedures/adverse effects* ; Aged ; Nomograms ; Adult ; Retrospective Studies ; Risk Factors

OBJECTIVE: To retrospectively analyze the characteristics and influencing factors of COVID-19 infection in patients with multiple myeloma (MM) who underwent autologous hematopoietic stem cell transplantation (AHSCT). METHODS: The clinical data of MM patients who underwent AHSCT in Ruijin Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 26, 2021 to December 26, 2022 were collected. The onset of COVID-19 infection, corresponding symptoms and laboratory tests were followed up in outpatient or by the means of telephone contact and online questionnaires. Related analysis was then performed. RESULTS: This study included 96 patients, and 72 cases among them were infected with COVID-19 while 24 cases were uninfected. Logistic regression analysis showed that vaccination did not significantly reduce the risk of COVID-19 infection, but patients who received two doses of the vaccine had a lower risk of developing moderate and severe disease than those who did not receive or received one dose (OR =0.06, P =0.029). Patients who received daratumumab before had a higher risk of COVID-19 infection (OR =5.78, P =0.039), while those with a history of immunomodulatory drugs (IMiDs) had the opposite effect (OR =0.31, P =0.028). The use of both drugs did not affect the severity of COVID-19 infection. CONCLUSION For MM patients undergoing AHSCT as first-line chemotherapy, COVID-19 vaccination does not significantly reduce the infection rate, but it plays a role in preventing moderate and severe cases. The application of antineoplastic drugs with different mechanisms has a certain impact on the susceptibility to the COVID-19, which should be considered comprehensively when creating treatment plans.
Humans ; Multiple Myeloma/complications* ; COVID-19/epidemiology* ; Hematopoietic Stem Cell Transplantation ; Transplantation, Autologous ; Retrospective Studies ; Risk Assessment ; Risk Factors ; Male ; Female ; Middle Aged ; SARS-CoV-2 ; Adult ; Antibodies, Monoclonal

Objective To explore the changes of durability properties of reusable surgical gowns when used in dry and wet conditions.Methods Reusable surgical gowns made of single-layer polyester fiber or 3-layer composite material were selected as test samples,and a Martindale abrasion and pilling tester was used as the basic test platform and modified to form fixtures suitable for the wet state environment.The reusable surgical gowns underwent abrasion experiments in wet and dry conditions to observe the changes in their fiber structure,and were subjected to water penetration resistance and swelling strength tests.Results Visually the reusable surgical gowns had few changes of the microscopic textile fiber structure in dry and wet conditions,and the gowns made of single-layer polyster fiber gained advantages over the outer layers of those of 3-layer composite material in abrasion resistance with the same friction cycles.In dry and wet conditions,the hydrostatic pressure values of the gowns of single-layer polyster fiber gradually decreased with the increase of the degree of abrasion,which were always lower than those of the gowns of 3-layer composite material;the swelling strength of the gowns of single-layer polyster fiber was always greater than that of the gowns of 3-layer composite material,which decreased with the deterioration of the wear more significantly than that of the gowns of 3-layer composite material.Conclusion The reusable surgical gowns made of single-layer polyester fiber or 3-layer composite material have few differences in durability and protective properties at the early stages of ablation in dry and wet conditions.The durability of the gowns decreases as the degree of wear increases,while the trend of the decrease is slowing down until the fabric breaks down and completely loses its barrier effect.[Chinese Medical Equipment Journal,2025,46(6):28-33]

Objective To explore the changes of durability properties of reusable surgical gowns when used in dry and wet conditions.Methods Reusable surgical gowns made of single-layer polyester fiber or 3-layer composite material were selected as test samples,and a Martindale abrasion and pilling tester was used as the basic test platform and modified to form fixtures suitable for the wet state environment.The reusable surgical gowns underwent abrasion experiments in wet and dry conditions to observe the changes in their fiber structure,and were subjected to water penetration resistance and swelling strength tests.Results Visually the reusable surgical gowns had few changes of the microscopic textile fiber structure in dry and wet conditions,and the gowns made of single-layer polyster fiber gained advantages over the outer layers of those of 3-layer composite material in abrasion resistance with the same friction cycles.In dry and wet conditions,the hydrostatic pressure values of the gowns of single-layer polyster fiber gradually decreased with the increase of the degree of abrasion,which were always lower than those of the gowns of 3-layer composite material;the swelling strength of the gowns of single-layer polyster fiber was always greater than that of the gowns of 3-layer composite material,which decreased with the deterioration of the wear more significantly than that of the gowns of 3-layer composite material.Conclusion The reusable surgical gowns made of single-layer polyester fiber or 3-layer composite material have few differences in durability and protective properties at the early stages of ablation in dry and wet conditions.The durability of the gowns decreases as the degree of wear increases,while the trend of the decrease is slowing down until the fabric breaks down and completely loses its barrier effect.[Chinese Medical Equipment Journal,2025,46(6):28-33]

Aim To discover the potential active compounds and possible mechanisms in rheumatoid arthritis (RA) treatment with Zhi-Huang-Zhi-Tong powder (ZHZTP) by using network pharmacology and in vitro study. Methods The active ingredient targets and disease targets of Zhihuang Zhitong Powder were searched and screened by database; they intersected to get a common target; and the "drug-component-target" relationship network diagram was constructed for GO and KEGG enrichment analysis of the overlapping genes; then the core components were docked with the core targets. Finally, based on the inflammation model of HUVECs in vitro, the efficacy and mechanism of Zhihuang Zhitong powder were verified by MTT method, plate scratch test and Western blot. Results Active compounds involved in RA treatment were screened in the present study, and the top two were ursolic acid and emodin, all playing crucial roles in RA treatment with ZHZTP. Additionally, the key target was AKTA, TNF and IL-6. GO and KEGG enrichment analysis revealed that ZHZTP regulated BP, MF and CC, and also focused on regulating AKTA, TNF and IL-6 signaling pathway. Molecular docking showed that interactions between key active compounds and key targets were stable. In vitro ZHZTP significantly inhibited cell viability and migration of TNF-a-stimulated HUVECs, and the involved mechanism may be associated with PI3K/AKT/m-TOR signaling. Conclusions The present study reveals that the potential active compounds of ZHZTP are ursolic acid and emodin, and moreover, the involved mechanisms of ZHZTP for RA treatment are associated with PI3 K/AKT/m-TOR signaling.

In recent years, with the increasing societal focus on drug quality and safety, quality issues have become a major challenge faced by the pharmaceutical industry, directly impacting consumer health and market trust. By combining multispectral imaging technology with machine learning, it is possible to achieve rapid, non-destructive, and precise detection of traditional Chinese medicine(TCM) preparations, thereby revolutionizing traditional detection methods and developing more convenient and automated solutions. This paper provides a comprehensive review of the current applications of rapid, non-destructive detection techniques based on machine learning algorithms in the field of TCM preparations. It analyzed the principles and advantages of commonly used rapid, non-destructive detection techniques, offering a reference for the application and promotion of these technologies in TCM preparation detection. Additionally, this paper explored various data preprocessing techniques, operational processes, and machine learning algorithms to enhance data utilization efficiency. Finally, it focused on the challenges of applying machine learning in TCM preparation detection and offered corresponding recommendations, providing guidance for the future integration of machine learning with rapid, non-destructive detection techniques in practical production.
Machine Learning ; Drugs, Chinese Herbal/analysis* ; Medicine, Chinese Traditional/methods* ; Humans ; Quality Control

The construction method and simulation parameter settings for the discrete element model of Jianwei Xiaoshi Granules, as the primary material of Jianwei Xiaoshi Tablets, are not yet clear. The accuracy of the simulation model significantly influences the dynamic response characteristics between granules. Therefore, it is necessary to calibrate the parameters to improve the accuracy of the simulation parameters. Using the repose angle of Jianwei Xiaoshi Granules as the response value, the response surface methodology was employed to optimize and calibrate the discrete element parameters. Physical experiments were conducted to determine the physical properties of Jianwei Xiaoshi Granules. Based on the Hertz-Mindlin with Johnson-Kendall-Roberts(JKR) V2 model and virtual simulation methods, a repose angle determination model was constructed in EDEM software. The repose angle was measured using image analysis and numerical fitting methods. The Plackett-Burman experiment was used to screen the initial parameters for significance in the discrete element simulation. The significant parameters were then subjected to a steepest ascent experiment to determine the optimal parameter range. Furthermore, based on the Box-Behnken experiment, a second-order regression equation between significant parameters and repose angle was established, with the repose angle of 37.64° in the physical experiment as the target value. The regression equation was optimized and solved. The significance screening experiment revealed that the granule-granule static friction coefficient, granule-granule rolling friction, and granule-steel plate rolling friction of Jianwei Xiaoshi Granules significantly influenced the simulated repose angle. The optimal parameter combination was found to be 0.330, 0.222, and 0.229. The simulation results with this optimal parameter combination showed that there was no significant difference between the simulated repose angle and the repose angle obtained in the physical experiment, with a relative error of 0.05%, which further validated the reliability of the calibrated discrete element parameters for Jianwei Xiaoshi Granules.
Drugs, Chinese Herbal/chemistry* ; Calibration ; Computer Simulation

Identification of critical material attributes(CMAs) is a key issue in the quality control of large-scale TCM products like Jianwei Xiaoshi Tablets. This study focuses on the granules of Jianwei Xiaoshi Tablets, using tablet tensile strength as the primary quality attribute. A method for identifying the CMAs and a design space for the granules were established, along with a predictive model for the granule CMAs based on Fourier transform near-infrared spectroscopy(FT-NIR). First, granules of Jianwei Xiaoshi Tablets with different properties were prepared using a partial factorial design method from the design of experiments(DOE). The powder properties of the granules were measured. An orthogonal partial least squares(OPLS) model was established to correlate the powder properties with tensile strength. Based on the characteristics of the comprehensive variables extracted by OPLS, the independent variables with the greatest explanatory power for tensile strength were identified. FT-NIR technology was then employed to establish a predictive model for the granule CMAs. The final CMAs identified were hygroscopicity, moisture content, D_(50), collapse angle, mass flow rate, and tapped density. The coefficients of determination of the prediction set(R■) and relative percentage deviation(RPD) of the prediction set for flowability, D_(50), and moisture content were 0.891, 0.994, and 0.998; and 2.97, 12.4, and 20.7, respectively. The established OPLS model clearly identified the impact of various factors on tensile strength, demonstrating good fit results. The model exhibited high prediction accuracy and can be used for the rapid and accurate determination of CMAs in granules of Jianwei Xiaoshi Tablets.
Drugs, Chinese Herbal/chemistry* ; Tablets/chemistry* ; Tensile Strength ; Quality Control ; Spectroscopy, Fourier Transform Infrared ; Spectroscopy, Near-Infrared

Objective: To explore the epidemiological characteristic of a COVID-19 outbreak caused by 2019-nCoV Omicron variant BF.7 and other provinces imported in Shenzhen and analyze transmission chains and characteristics. Methods: Field epidemiological survey was conducted to identify the transmission chain, analyze the generation relationship among the cases. The 2019-nCoV nucleic acid positive samples were used for gene sequencing. Results: From 8 to 23 October, 2022, a total of 196 cases of COVID-19 were reported in Shenzhen, all the cases had epidemiological links. In the cases, 100 were men and 96 were women, with a median of age, M (Q₁, Q₃) was 33(25, 46) years. The outbreak was caused by traverlers initial cases infected with 2019-nCoV who returned to Shenzhen after traveling outside of Guangdong Province.There were four transmission chains, including the transmission in place of residence and neighbourhood, affecting 8 persons, transmission in social activity in the evening on 7 October, affecting 65 persons, transmission in work place on 8 October, affecting 48 persons, and transmission in a building near the work place, affecting 74 persons. The median of the incubation period of the infection, M (Q₁, Q₃) was 1.44 (1.11, 2.17) days. The incubation period of indoor exposure less than that of the outdoor exposure, M (Q₁, Q₃) was 1.38 (1.06, 1.84) and 1.95 (1.22, 2.99) days, respcetively (Wald χ²=10.27, P=0.001). With the increase of case generation, the number and probability of gene mutation increased. In the same transmission chain, the proportion of having 1-3 mutation sites was high in the cases in the first generation. Conclusions: The transmission chains were clear in this epidemic. The incubation period of Omicron variant BF.7 infection was shorter, the transmission speed was faster, and the gene mutation rate was higher. It is necessary to conduct prompt response and strict disease control when epidemic occurs.
Male ; Humans ; Female ; SARS-CoV-2 ; COVID-19/epidemiology* ; Disease Outbreaks ; Epidemics ; China/epidemiology*

Objective: To understand the basic characteristics of previously reported patients with hepatitis C and analyze the related factors affecting their antiviral treatment. Methods: A convenient sampling method was adopted. Patients who had been previously diagnosed with hepatitis C in the Wenshan Prefecture of Yunnan Province and Xuzhou City of Jiangsu Province were contacted by telephone for an interview study. The Andersen health service utilization behavior model and related literature were used to design the research framework for antiviral treatment in previously reported hepatitis C patients. A step-by-step multivariate regression analysis was used in previously reported hepatitis C patients treated with antiviral therapy. Results: A total of 483 hepatitis C patients, aged 51.73 ± 12.06 years, were investigated. The proportion of male, agricultural occupants who were registered permanent residents, farmers and migrant workers was 65.24%, 67.49%, and 58.18%, respectively. Han ethnicity (70.81%), married (77.02%), and junior high school and below educational level (82.61%) were the main ones. Multivariate logistic regression analysis results showed that married patients with hepatitis C (OR = 3.19, 95% CI: 1.93-5.25, compared with unmarried, divorced, and widowed patients) with high school education or above (OR = 2.54, 95% CI: 1.54-4.20, compared with patients with junior high school education or below) were more likely to receive antiviral treatment in the predisposition module. Patients with severe self-perceived hepatitis C in the need factor module (compared with patients with mild self-perceived disease, OR = 3.36, 95% CI: 2.09-5.40) were more likely to receive treatment. In the competency module, the family's per capita monthly income was more than 1,000 yuan (compared with patients with per capita monthly income below 1,000 yuan, OR = 1.59, 95% CI: 1.02-2.47), and the patients had a high level of awareness of hepatitis C knowledge (compared with patients with a low level of knowledge, OR = 1.54, 95% CI: 1.01-2.35), and the family members who knew the patient's infection status (compared with patients with an unknown infection status, OR = 4.59, 95% CI: 2.24-9.39) were more likely to receive antiviral treatment. Conclusion: Different income, educational, and marital statuses are related to antiviral treatment behavior in hepatitis C patients. Family support of hepatitis C patients receiving hepatitis C-related knowledge and their families knowing the infection status is more important in promoting the antiviral treatment of patients, suggesting that in the future, we should further strengthen the hepatitis C knowledge of hepatitis C patients, especially the family support of hepatitis C patients' families in treatment.
Humans ; Male ; Antiviral Agents/therapeutic use* ; China ; Hepatitis C/drug therapy* ; Hepacivirus ; Logistic Models