With the rapid development of competitive sports, the incidence of anterior cruciate ligament (ACL) injury is on the rise. Such injuries may shorten athletes′ career and lead to other long-term adverse consequences. Although athletes generally recover well after ACL reconstruction, many still struggle to return to their pre-injury performance levels. Advances in the understanding of ACL anatomy and injury mechanisms, along with the evolution of surgical techniques and rehabilitation methods, have provided more individualized and tailored options for athletes following ACL injuries. However, there is currently no consensus in China regarding surgical and rehabilitation strategies for competitive athletes aiming to return to sports after ACL injuries. To this end, the Sports Medicine Committee of the Chinese Research Hospital Association and the Editorial Board of the Chinese Journal of Trauma jointly formulated the Expert consensus on surgical treatment and rehabilitation for competitive sports athletes returning to sports after anterior cruciate ligament injury ( version 2025), and presented 14 recommendations covering surgical indications, preoperative rehabilitation, surgical timing, surgical strategies and postoperative rehabilitation strategies, aiming to improve the surgical treatment and rehabilitation system for ACL injuries in competitive athletes and facilitate their return to high-level sports performance after injury.

OBJECTIVES: Verrucous epidermal nevus (VEN), seborrheic keratosis (SK), verruca plana (VP), verruca vulgaris (VV), and nevus sebaceous (NS) are common verrucous proliferative skin diseases with similar clinical appearances, often posing diagnostic challenges. Dermoscopy and reflectance confocal microscopy (RCM) can aid in their differentiation, yet their specific features under these tools have not been systematically described. This study aims to summarize and analyze the dermoscopic and RCM features of VEN, SK, VP, VV, and NS. METHODS: A total of 121 patients with histopathologically confirmed verrucous proliferative skin diseases were enrolled. Dermoscopy and RCM imaging was used to observe and analyze the microscopic features of these conditions. RESULTS: Under dermoscopy, the 5 diseases displayed distinct characteristics: VEN typically showed gyriform structures; SK was characterized by gyriform structures, comedo-like openings, and milia-like cysts; VP and VV featured dotted vessels and frogspawn-like structures; NS presented as brownish-yellow globules. RCM revealed shared features such as hyperkeratosis and acanthosis across all 5 diseases. Specific features included gyriform structures and elongated rete ridges in VEN; pseudocysts and gyriform structures in SK; evenly distributed ring-like structures in VP; vacuolated cells and papillomatous proliferation in VV; and frogspawn-like structures in NS. CONCLUSIONS These 5 verrucous proliferative skin conditions exhibit distinguishable features under both dermoscopy and RCM. The combination of these 2 noninvasive imaging modalities holds significant clinical value for the differential diagnosis of verrucous proliferative skin diseases.
Humans ; Dermoscopy/methods* ; Diagnosis, Differential ; Microscopy, Confocal/methods* ; Male ; Female ; Adult ; Middle Aged ; Adolescent ; Keratosis, Seborrheic/pathology* ; Young Adult ; Warts/diagnosis* ; Child ; Aged ; Skin Diseases/pathology* ; Nevus, Sebaceous of Jadassohn/diagnosis* ; Skin Neoplasms/diagnosis* ; Child, Preschool

OBJECTIVES: Whether vortioxetine has a utility as an adjuvant drug in the treatment of bipolar depression remains controversial. This study aimed to validate the efficacy and safety of vortioxetine in bipolar depression. METHODS: Patients with bipolar Ⅱ depression were enrolled in this prospective, two-center, randomized, 12-week pilot trial. The main indicator for assessing treatment effectiveness was a Montgomery-Asberg Depression Rating Scale (MADRS) of ≥50%. All eligible patients initially received four weeks of lurasidone monotherapy. Patients who responded well continued to receive this kind of monotherapy. However, no-response patients were randomly assigned to either valproate or vortioxetine treatment for eight weeks. By comprehensively comparing the results of MADRS over a period of 4‍‒‍12 weeks, a systematic analysis was conducted to determine whether vortioxetine could be used as an adjuvant drug for treating bipolar depression. RESULTS: Thirty-seven patients responded to lurasidone monotherapy, and 60 patients were randomly assigned to the valproate or vortioxetine group for eight weeks. After two weeks of combined valproate or vortioxetine treatment, the MADRS score in the vortioxetine group was significantly lower than that in the valproate group. There was no difference in the MADRS scores between the two groups at 8 and 12 weeks. The incidence of side effects did not significantly differ between the valproate and vortioxetine groups. Importantly, three patients in the vortioxetine group appeared to switch to mania or hypomania. CONCLUSIONS This study suggested that lurasidone combination with vortioxetine might have potential benefits to bipolar II depression in the early stage, while disease progression should be monitored closely for the risk of switching to mania.
Humans ; Bipolar Disorder/drug therapy* ; Vortioxetine/therapeutic use* ; Male ; Female ; Middle Aged ; Adult ; Valproic Acid/administration & dosage* ; Lurasidone Hydrochloride/administration & dosage* ; Prospective Studies ; Treatment Outcome ; Pilot Projects ; Drug Therapy, Combination ; Sulfides/therapeutic use* ; Antidepressive Agents/therapeutic use*

OBJECTIVES: To investigate the impact of hepatitis B virus (HBV) infection on oral microbiota and metabolites in patients with metabolic dysfunction-associated fatty liver disease (MAFLD) and the underlying mechanisms. METHODS: This prospective study was conducted in 47 MAFLD patients complicated with chronic hepatitis B (CHB) and 48 MAFLD patients without CHB enrolled from November, 2023 to January, 2024. Fasting tongue coating samples were collected from the patients for analyzing microbial community structures and metabolites using high-throughput 16S rDNA sequencing and non-targeted metabolomics techniques, and their associations with clinical indicators and biological pathways were explored using correlation analysis and functional annotation. RESULTS: The levels of fasting blood glucose, total cholesterol (TC), gamma-glutamyl transferase (GGT), and severity of fatty liver were all significantly lower in MAFLD+CHB group than in MAFLD group. Microbiota analysis showed that the abundances of Patescibacteria (at the phylum level), Hydrogenophaga, and Absconditabacteriales (at the genus level) were significantly increased, while the abundance of Megasphaera was decreased in MAFLD+CHB group. The differential microbiota were significantly correlated with TC, GGT and low-density lipoprotein (r=-0.68‒0.75). Metabolomics analysis revealed that 469 metabolites (including lipids and amino acids) were upregulated and 2306 (including organic oxygen-containing compounds and phenylpropanoids) were downregulated in MAFLD+CHB group, for which KEGG enrichment analysis suggested abnormal activation of the linoleic acid metabolism and glycerophospholipid metabolism pathways. Correlation analysis between microbiota and metabolites indicated that Patescibacteria and Megasphaera, which were positively correlated with lipid metabolites and negatively with fatty acid metabolites, respectively, jointly affected glycolipid metabolism and oxidative stress pathways. CONCLUSIONS Compared to patients with MAFLD alone, MAFLD patients with concurrent chronic HBV infection showed lower levels in some lipid metabolism indicators and the degree of hepatic steatosis, accompanied by alterations in oral microbiota structure and metabolic profiles. The precise mechanisms involved require further investigation to be fully elucidated.
Humans ; Lipid Metabolism ; Prospective Studies ; Microbiota ; Hepatitis B, Chronic/microbiology* ; Male ; Female ; Adult ; Fatty Liver/microbiology* ; Middle Aged ; Mouth/microbiology* ; Metabolomics

Polygonati Rhizoma demonstrates significant potential for addressing both chronic and hidden hunger. The supply of high-quality seedlings is a primary factor influencing the development of the Polygonati Rhizoma industry. Warm water soaking is often used in agriculture to promote the rapid germination of seeds, while its application and molecular mechanism in Polygonati Rhizoma have not been reported. To rapidly obtain high-quality seedlings, this study treated Polygonatum kingianum var. grandifolium seeds with sand storage at low temperatures, warm water soaking, and cultivation temperature gradients. The results showed that the culture at 25 ℃ or sand storage at 4 ℃ for 2 months rapidly broke the seed dormancy of P. kingianum var. grandifolium, while the culture at 20 ℃ or sand storage at 4 ℃ for 1 month failed to break the seed dormancy. Soaking seeds in 60 ℃ warm water further increased the germination rate, germination potential, and germination index. Specifically, the seeds soaked at 60 ℃ and cultured at 25 ℃ without sand storage treatment(Aa25) achieved a germination rate of 78. 67%±1. 53% on day 42 and 83. 40%±4. 63% on day 77. The seeds pretreated with sand storage at 4 ℃ for 2 months, soaked in 60 ℃ water, and then cultured at 25 ℃ achieved a germination rate comparable to that of Aa25 on day 77. Transcriptomic analysis indicated that warm water soaking might promote germination by triggering reactive oxygen species( ROS), inducing the expression of heat shock factors( HSFs) and heat shock proteins( HSPs), which accelerated DNA replication, transcript maturation, translation, and processing, thereby facilitating the accumulation and turnover of genetic materials. According to the results of indoor controlled experiments and field practices, maintaining a germination and seedling cultivation environment at approximately 25 ℃ was crucial for the one-year seedling cultivation of P. kingianum var. grandifolium.
Germination ; Seedlings/genetics* ; Water/metabolism* ; Seeds/metabolism* ; Polygonatum/genetics* ; Temperature ; Plant Proteins/genetics* ; Plant Dormancy

OBJECTIVE: To investigate the effects of bone density, plate bending degree and proximal screw type on the stress fracture of clavicle hook. METHODS: Three sows weighing between 45 and 50 kg were selected, from which a total of 40 rivs were collected. The 15 ribs of sows were divided into 3 groups according to bone density and bone hardness with 5 rivs in each group. And then the 3 groups were fixed with 6-hole collarbone hook plates and 3 locking screws. Measure the maximum torsion force when the ribs were fractured by force. The same size 15 rids were divided into 3 groups, named forward bending group, 0° group(the angle between the plate surface and the rib surface) and reverse bending group. All fixed with 6-hole collarbone hook plates and locking screws to measure the maximum torsion force of rib stress fracture. Then the same size 10 rids were divided into 2 groups, the normal screw group and the locking screw group with 5 ribs in each group. Both groups were fixed with 6-hole collarbone hook plates and screws. The normal screw group was a normal screw, fixed in proximal end, and two locking screws. The locking screw group was fixed by locking screws. Measure the maximum torsion force of the two groups when the ribs fracture by force. RESULTS: In the bone density experiment, the torque force of hard bone group (104.51±6.27) N was greater than the normal bone group (75.04±3.81) N(t=8.979, P<0.05). The force of normal bone group was greater than the osteoporosis group (49.99±2.12) N(t=12.832, P<0.05). In the bending collarbone hook experiment, the order of the torque force generated by each group as follow:the forward bending group (343.59±6.18) N greater than the 0° group (106.01±5.29) N(t=65.279, P<0.05) greater than the reverse bending group (95.82±4.12) N(t=3.398, P<0.05). The force of the normal screw group (98.68±0.70) N was greater than the locking screw group (50.20±0.95) N(t=91.484, P<0.05). The data comparisons of each group were statistically significant. CONCLUSION Bone density, plate bending degree and proximal screw type had an impact on stress fracture of clavicle hook plate. Higher bone density, forward bending of the steel plate, and ordinary screws in proximal end can reduce the rates of stress fractures of clavicle hooks.
Animals ; Bone Plates ; Clavicle/surgery* ; Swine ; Fractures, Stress/etiology* ; Female ; Risk Factors ; Fracture Fixation, Internal/instrumentation* ; Bone Screws ; Biomechanical Phenomena ; Bone Density

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

With the rapid development of competitive sports, the incidence of anterior cruciate ligament (ACL) injury is on the rise. Such injuries may shorten athletes′ career and lead to other long-term adverse consequences. Although athletes generally recover well after ACL reconstruction, many still struggle to return to their pre-injury performance levels. Advances in the understanding of ACL anatomy and injury mechanisms, along with the evolution of surgical techniques and rehabilitation methods, have provided more individualized and tailored options for athletes following ACL injuries. However, there is currently no consensus in China regarding surgical and rehabilitation strategies for competitive athletes aiming to return to sports after ACL injuries. To this end, the Sports Medicine Committee of the Chinese Research Hospital Association and the Editorial Board of the Chinese Journal of Trauma jointly formulated the Expert consensus on surgical treatment and rehabilitation for competitive sports athletes returning to sports after anterior cruciate ligament injury ( version 2025), and presented 14 recommendations covering surgical indications, preoperative rehabilitation, surgical timing, surgical strategies and postoperative rehabilitation strategies, aiming to improve the surgical treatment and rehabilitation system for ACL injuries in competitive athletes and facilitate their return to high-level sports performance after injury.

Objective:To verify the predictive value of the Second Revision of the International Staging System (R2-ISS) in newly diagnosed patients with multiple myeloma (MM) who underwent first-line autologous hematopoietic stem cell transplantation (ASCT) in a new drug era in China.Methods:This multicenter retrospective cohort study enrolled patients with newly diagnosed MM from three centers in China (Beijing Chao-Yang Hospital, Capital Medical University; the First Affiliated Hospital, Sun Yat-Sen University, and the Second Affiliated Hospital of Naval Medical University) from June 2008 to June 2018. A total of 401 newly diagnosed patients with MM who were candidates for ASCT were enrolled in this cohort, all received proteasome inhibitor and/or immunomodulator-based induction chemotherapy followed by ASCT. Baseline and follow-up data were collected. The patients were regrouped using R2-ISS. Progression-free survival (PFS) and overall survival (OS) were analyzed. The Kaplan-Meier method was used to analyze the survival curve and two survival curves were compared using the log-rank test. Cox regression analysis were performed to analyze the relationship between risk factors and survival.Results:The median age of the patients was 53 years (range 25-69 years) and 59.5% (240 cases) were men. Newly diagnosed patients with renal impairment accounted for 11.5% (46 cases). According to Revised-International Staging System (R-ISS), 74 patients (18.5 %) were diagnosed with stage Ⅰ, 259 patients (64.6%) with stage Ⅱ, and 68 patients (17.0%) with stage Ⅲ. According to the R2-ISS, the distribution of patients in each group was as follows: 50 patients (12.5%) in stage Ⅰ, 95 patients (23.7%) in stage Ⅱ, 206 patients (51.4%) in stage Ⅲ, and 50 patients (12.5%) in stage Ⅳ. The median follow-up time was 35.9 months (range, 6-119 months). According to the R2-ISS stage, the median PFS in each group was: 75.3 months for stage Ⅰ; 62.0 months for stage Ⅱ, 39.2 months for stage Ⅲ, and 30.3 months for stage Ⅳ; and the median OS was not reached, 86.6 months, 71.6 months, and 38.5 months, respectively. There were statistically significant differences in PFS and OS between different groups (both P<0.001). Multivariate Cox regression analysis showed that stages Ⅲ and Ⅳ of the R2-ISS were independent prognostic factors for PFS ( HR=2.37, 95% CI 1.30-4.30; HR=4.50, 95% CI 2.35-9.01) and OS ( HR=4.20, 95% CI 1.50-11.80; HR=9.53, 95% CI 3.21-28.29). Conclusions:The R2-ISS has significant predictive value for PFS and OS for transplant-eligible patients with MM in the new drug era. However, the universality of the R2-ISS still needs to be further verified in different populations.