Objective To understand mosquito density, species composition, and seasonal variations around the Beijing Capital International Airport(BCIA)and provide scientific evidence for mosquito-borne disease prevention and control. Methods Meteorological data were collected from 2016 to 2022, and mosquito density was monitored at seven surveillance sites around the BCIA from May to October each year using CO2-baited mosquito traps to analyze the relationship between mosquito density and meteorological factors. Results In total,68 518 female mosquitoes were captured, with a mosquito density of 10.20 per light · hour. The dominant species was Culex pipiens pallens(73.90%), followed by Aedes albopictus(9.71%)and Ae. vexans(9.29%);the mosquito density was highest in 2016(14.8 per light·hour)and lowest in 2022(4.46 per light·hour). Significant statistical differences were observed in mosquito density among different species(F=18.118, P<0.05). The density of Cx. pipiens pallens and other mosquito species showed a mutually exclusive trend; the peak of mosquito density varied based on years and habitats, with significant statistical differences in mosquito density among different habitats(F=8.504, P<0.05). The highest mosquito density was observed near the Wenyu River(21.50 per light·hour), whereas the lowest was recorded at the BCIA construction site(2.44 per light· hour). The monthly average temperature(r=0.595), monthly average highest temperature(r=0.575), and monthly average lowest temperature(r=0.624)showed moderate positive correlations, whereas the monthly average air pressure(r=-0.484)showed a moderate negative correlation. The monthly average minimum temperature was included in the regression model(F=25.575, P<0.000), and the equation Y=1.029X4-8.181 was used. The monthly average air pressure 2 months prior(b=-2.418, β=-1.619, P<0.05)and the monthly average relative humidity(b=-0.739, β=-1.201, P<0.05)significantly negatively predicted the mosquito density. Notably, the regression equation used was y=2526.170+(-2.418)X9+(-0.739)X13. The exposure-response analysis revealed that the density of mosquitoes was not linearly related to the average monthly air pressure, rainfall, and duration of sunshine. Conclusions The dominant mosquito species around the BCIA was Cx. pipiens pallens, Ae. albopictus, and Ae. vexans. During the control of Cx. pipiens pallens, the impact on other mosquito species must also be considered. Environmental management, breeding sites, and scientific use of pesticides should be prioritized based on the activity periods of mosquitoes. Further studies on mosquitoes and meteorological factors should be conducted to provide references and novel avenues for mosquito control.

Objective To investigate an automated pretreatment technology for detecting levels of free silica in workplace dust. Methods An fully automated pretreatment workstation for detecting free silica levels in workplace dust was developed by integrating graphite-controlled digestion temperature, online-controlled dilution of digestion solutions, and filtration endpoint recognition based on monitoring technology, combined with multi-channel synchronous measurements. Results The fully automatic pretreatment workstation was used to digest and filter 14 standard samples of free silica produced by three institutions, and then detected by pyrophosphate method. The result range of high-, medium-, and low-level free silica standard samples detection was 66.5%-84.8%, 40.0%-44.5%, and 2.1%-24.8%, respectively. The mean relative standard deviations were 3.9%, 1.4% and 1.5%. Conclusion The fully automated pretreatment workstation produced results that met relevant requirements. It can effectively replace the manual digestion and filtration steps of the pyrophosphate method to measure free silica levels in workplace dust and enable rapid detection of free silica in dust samples.

OBJECTIVE: To investigate the effects of bone density, plate bending degree and proximal screw type on the stress fracture of clavicle hook. METHODS: Three sows weighing between 45 and 50 kg were selected, from which a total of 40 rivs were collected. The 15 ribs of sows were divided into 3 groups according to bone density and bone hardness with 5 rivs in each group. And then the 3 groups were fixed with 6-hole collarbone hook plates and 3 locking screws. Measure the maximum torsion force when the ribs were fractured by force. The same size 15 rids were divided into 3 groups, named forward bending group, 0° group(the angle between the plate surface and the rib surface) and reverse bending group. All fixed with 6-hole collarbone hook plates and locking screws to measure the maximum torsion force of rib stress fracture. Then the same size 10 rids were divided into 2 groups, the normal screw group and the locking screw group with 5 ribs in each group. Both groups were fixed with 6-hole collarbone hook plates and screws. The normal screw group was a normal screw, fixed in proximal end, and two locking screws. The locking screw group was fixed by locking screws. Measure the maximum torsion force of the two groups when the ribs fracture by force. RESULTS: In the bone density experiment, the torque force of hard bone group (104.51±6.27) N was greater than the normal bone group (75.04±3.81) N(t=8.979, P<0.05). The force of normal bone group was greater than the osteoporosis group (49.99±2.12) N(t=12.832, P<0.05). In the bending collarbone hook experiment, the order of the torque force generated by each group as follow:the forward bending group (343.59±6.18) N greater than the 0° group (106.01±5.29) N(t=65.279, P<0.05) greater than the reverse bending group (95.82±4.12) N(t=3.398, P<0.05). The force of the normal screw group (98.68±0.70) N was greater than the locking screw group (50.20±0.95) N(t=91.484, P<0.05). The data comparisons of each group were statistically significant. CONCLUSION Bone density, plate bending degree and proximal screw type had an impact on stress fracture of clavicle hook plate. Higher bone density, forward bending of the steel plate, and ordinary screws in proximal end can reduce the rates of stress fractures of clavicle hooks.
Animals ; Bone Plates ; Clavicle/surgery* ; Swine ; Fractures, Stress/etiology* ; Female ; Risk Factors ; Fracture Fixation, Internal/instrumentation* ; Bone Screws ; Biomechanical Phenomena ; Bone Density

With the rapid development of competitive sports, the incidence of anterior cruciate ligament (ACL) injury is on the rise. Such injuries may shorten athletes′ career and lead to other long-term adverse consequences. Although athletes generally recover well after ACL reconstruction, many still struggle to return to their pre-injury performance levels. Advances in the understanding of ACL anatomy and injury mechanisms, along with the evolution of surgical techniques and rehabilitation methods, have provided more individualized and tailored options for athletes following ACL injuries. However, there is currently no consensus in China regarding surgical and rehabilitation strategies for competitive athletes aiming to return to sports after ACL injuries. To this end, the Sports Medicine Committee of the Chinese Research Hospital Association and the Editorial Board of the Chinese Journal of Trauma jointly formulated the Expert consensus on surgical treatment and rehabilitation for competitive sports athletes returning to sports after anterior cruciate ligament injury ( version 2025), and presented 14 recommendations covering surgical indications, preoperative rehabilitation, surgical timing, surgical strategies and postoperative rehabilitation strategies, aiming to improve the surgical treatment and rehabilitation system for ACL injuries in competitive athletes and facilitate their return to high-level sports performance after injury.

Objective:To develop a treatment-related quality of life scale for Chinese patients with multiple myeloma (MM) and to test its reliability and validity.Methods:The initial scale was constructed through a literature search, Delphi expert correspondence, and cognitive testing. This study conducted a preliminary survey of 379 patients with MM and a formal survey of 865 patients from the hematology departments of 155 hospitals nationwide from February 2024 to March 2024. The final scale was obtained after conducting item analysis and reliability and validity tests on the initial scale.Results:The constructed scale contains 36 items covering six domains: physiological, psychological, social, treatment side effects, general health, and others. In the preliminary survey, the Cronbach’s alpha coefficient of each item ranged from 0.597 to 0.939, and the test-retest reliability was 0.747 ( P<0.001). Exploratory factor analysis extracted eight common factors with a cumulative variance contribution of 60.058%. In the formal survey, the Cronbach’s alpha coefficient of each item ranged from 0.484 to 0.930, and the test-retest reliability was 0.835 ( P<0.001). Confirmatory factor analysis revealed a comparative fit index of 0.750, a root-mean-square error of approximation of 0.090, and a root-mean-square residual of 0.067. Conclusion:The treatment-related quality of life scale for Chinese patients with MM designed in this study exhibited good reliability and validity, reflecting the impact of treatment on the quality of life of patients. This scale can provide a reference to clinicians for assessing the disease status of patients.

Objective To evaluate the efficacy of the manual cyclotorsion compensation method based on the obser-vation screen in the correction of with-the-rule astigmatism during small incision lenticule extraction(SMILE).Methods This prospective study enrolled 40 patients who underwent SMILE and another 40 patients who underwent Q-value-guided femtosecond laser-assisted laser in situ keratomileusis(FS-LASIK)at the Ophthalmology Center of the Second Affiliated Hospital of Nanchang University from April to September 2024.Through the random number method,one eye of each pa-tient who underwent SMILE was assigned to the manual cyclotorsion compensation group(the cyclotorsion group,40 eyes),while the contralateral eye was assigned to the non-cyclotorsion group(the non-cyclotorsion group,40 eyes).Meanwhile,one eye of each patient who underwent FS-LASIK was randomly selected for the FS-LASIK group(40 eyes).The age,uncorrected distance visual acuity(UDVA),spherical power,cylindrical power,spherical equivalent(SE),and corrected distance visual acuity(CDVA)were recorded before surgery and 3 months after surgery,respectively.Astigma-tism was subjected to Alpins vector analysis,and the indicators for assessing astigmatism included target-induced astigma-tism(TIA),surgically-induced astigmatism(SIA),difference vector(DV),correction index(CI),success index(IOS),angle of error(AE),and absolute value of angle of error(|AE|).Results Before surgery,there was no significant difference in age,spherical power,cylindrical power,SE,and CDVA among the cyclotorsion group,the non-cyclotorsion group,and the FS-LASIK group(all P＞0.05).At 3 months after surgery,the cyclotorsion group showed better UDVA and lower cylindrical power than the non-cyclotorsion group,with statistically significant differences(both P＜0.05);howev-er,there was no significant difference in CDVA,spherical power,and SE between the two groups(all P＞0.05).Besides,there was no significant difference in UDVA,CDVA,or refractive parameters between the cyclotorsion and FS-LASIK groups(all P＞0.05).The Alpins vector analysis of astigmatism 3 months after surgery revealed better SIA,CI,IOS,and|AE|in the cyclotorsion group compared with the non-cyclotorsion group,with statistically significant differences(all P＜0.05);however,there was no significant difference in TIA,DV,and AE between the two groups(all P＞0.05).No signifi-cant differences were found between the cyclotorsion and FS-LASIK groups in any astigmatism vector parameter(all P＞0.05).The linear regression analysis results indicated a high linear correlation between TIA and SIA in all groups.Conclu-sion The manual cyclotorsion compensation method based on the observation screen in the correction of with-the-rule astigmatism during SMILE is comparable to Q-value-guided FS-LASIK and superior to the conventional central tear film marking method in SMILE.

Objective To evaluate the efficacy of the manual cyclotorsion compensation method based on the obser-vation screen in the correction of with-the-rule astigmatism during small incision lenticule extraction(SMILE).Methods This prospective study enrolled 40 patients who underwent SMILE and another 40 patients who underwent Q-value-guided femtosecond laser-assisted laser in situ keratomileusis(FS-LASIK)at the Ophthalmology Center of the Second Affiliated Hospital of Nanchang University from April to September 2024.Through the random number method,one eye of each pa-tient who underwent SMILE was assigned to the manual cyclotorsion compensation group(the cyclotorsion group,40 eyes),while the contralateral eye was assigned to the non-cyclotorsion group(the non-cyclotorsion group,40 eyes).Meanwhile,one eye of each patient who underwent FS-LASIK was randomly selected for the FS-LASIK group(40 eyes).The age,uncorrected distance visual acuity(UDVA),spherical power,cylindrical power,spherical equivalent(SE),and corrected distance visual acuity(CDVA)were recorded before surgery and 3 months after surgery,respectively.Astigma-tism was subjected to Alpins vector analysis,and the indicators for assessing astigmatism included target-induced astigma-tism(TIA),surgically-induced astigmatism(SIA),difference vector(DV),correction index(CI),success index(IOS),angle of error(AE),and absolute value of angle of error(|AE|).Results Before surgery,there was no significant difference in age,spherical power,cylindrical power,SE,and CDVA among the cyclotorsion group,the non-cyclotorsion group,and the FS-LASIK group(all P＞0.05).At 3 months after surgery,the cyclotorsion group showed better UDVA and lower cylindrical power than the non-cyclotorsion group,with statistically significant differences(both P＜0.05);howev-er,there was no significant difference in CDVA,spherical power,and SE between the two groups(all P＞0.05).Besides,there was no significant difference in UDVA,CDVA,or refractive parameters between the cyclotorsion and FS-LASIK groups(all P＞0.05).The Alpins vector analysis of astigmatism 3 months after surgery revealed better SIA,CI,IOS,and|AE|in the cyclotorsion group compared with the non-cyclotorsion group,with statistically significant differences(all P＜0.05);however,there was no significant difference in TIA,DV,and AE between the two groups(all P＞0.05).No signifi-cant differences were found between the cyclotorsion and FS-LASIK groups in any astigmatism vector parameter(all P＞0.05).The linear regression analysis results indicated a high linear correlation between TIA and SIA in all groups.Conclu-sion The manual cyclotorsion compensation method based on the observation screen in the correction of with-the-rule astigmatism during SMILE is comparable to Q-value-guided FS-LASIK and superior to the conventional central tear film marking method in SMILE.

With the rapid development of competitive sports, the incidence of anterior cruciate ligament (ACL) injury is on the rise. Such injuries may shorten athletes′ career and lead to other long-term adverse consequences. Although athletes generally recover well after ACL reconstruction, many still struggle to return to their pre-injury performance levels. Advances in the understanding of ACL anatomy and injury mechanisms, along with the evolution of surgical techniques and rehabilitation methods, have provided more individualized and tailored options for athletes following ACL injuries. However, there is currently no consensus in China regarding surgical and rehabilitation strategies for competitive athletes aiming to return to sports after ACL injuries. To this end, the Sports Medicine Committee of the Chinese Research Hospital Association and the Editorial Board of the Chinese Journal of Trauma jointly formulated the Expert consensus on surgical treatment and rehabilitation for competitive sports athletes returning to sports after anterior cruciate ligament injury ( version 2025), and presented 14 recommendations covering surgical indications, preoperative rehabilitation, surgical timing, surgical strategies and postoperative rehabilitation strategies, aiming to improve the surgical treatment and rehabilitation system for ACL injuries in competitive athletes and facilitate their return to high-level sports performance after injury.

Objective:To develop a treatment-related quality of life scale for Chinese patients with multiple myeloma (MM) and to test its reliability and validity.Methods:The initial scale was constructed through a literature search, Delphi expert correspondence, and cognitive testing. This study conducted a preliminary survey of 379 patients with MM and a formal survey of 865 patients from the hematology departments of 155 hospitals nationwide from February 2024 to March 2024. The final scale was obtained after conducting item analysis and reliability and validity tests on the initial scale.Results:The constructed scale contains 36 items covering six domains: physiological, psychological, social, treatment side effects, general health, and others. In the preliminary survey, the Cronbach’s alpha coefficient of each item ranged from 0.597 to 0.939, and the test-retest reliability was 0.747 ( P<0.001). Exploratory factor analysis extracted eight common factors with a cumulative variance contribution of 60.058%. In the formal survey, the Cronbach’s alpha coefficient of each item ranged from 0.484 to 0.930, and the test-retest reliability was 0.835 ( P<0.001). Confirmatory factor analysis revealed a comparative fit index of 0.750, a root-mean-square error of approximation of 0.090, and a root-mean-square residual of 0.067. Conclusion:The treatment-related quality of life scale for Chinese patients with MM designed in this study exhibited good reliability and validity, reflecting the impact of treatment on the quality of life of patients. This scale can provide a reference to clinicians for assessing the disease status of patients.

Objective This study aimed to investigate the potential relationship between urinary metals copper (Cu), arsenic (As), strontium (Sr), barium (Ba), iron (Fe), lead (Pb) and manganese (Mn) and grip strength. Methods We used linear regression models, quantile g-computation and Bayesian kernel machine regression (BKMR) to assess the relationship between metals and grip strength.Results In the multimetal linear regression, Cu (β=-2.119), As (β=-1.318), Sr (β=-2.480), Ba (β=0.781), Fe (β= 1.130) and Mn (β=-0.404) were significantly correlated with grip strength (P < 0.05). The results of the quantile g-computation showed that the risk of occurrence of grip strength reduction was -1.007 (95％ confidence interval:-1.362, -0.652; P < 0.001) when each quartile of the mixture of the seven metals was increased. Bayesian kernel function regression model analysis showed that mixtures of the seven metals had a negative overall effect on grip strength, with Cu, As and Sr being negatively associated with grip strength levels. In the total population, potential interactions were observed between As and Mn and between Cu and Mn (Pinteractions of 0.003 and 0.018, respectively).Conclusion In summary, this study suggests that combined exposure to metal mixtures is negatively associated with grip strength. Cu, Sr and As were negatively correlated with grip strength levels, and there were potential interactions between As and Mn and between Cu and Mn.